132 lines
3.5 KiB
YAML
132 lines
3.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: GENI Serial Engine QUP Wrapper Controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
|
|
description: |
|
|
Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
|
|
is a programmable module for supporting a wide range of serial interfaces
|
|
like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
|
|
Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
|
|
Wrapper controller is modeled as a node with zero or more child nodes each
|
|
representing a serial engine.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,geni-se-qup
|
|
|
|
reg:
|
|
description: QUP wrapper common register address and length.
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: m-ahb
|
|
- const: s-ahb
|
|
|
|
clocks:
|
|
items:
|
|
- description: Master AHB Clock
|
|
- description: Slave AHB Clock
|
|
|
|
"#address-cells":
|
|
const: 2
|
|
|
|
"#size-cells":
|
|
const: 2
|
|
|
|
ranges: true
|
|
|
|
interconnects:
|
|
maxItems: 1
|
|
|
|
interconnect-names:
|
|
const: qup-core
|
|
|
|
iommus:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clock-names
|
|
- clocks
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- ranges
|
|
|
|
patternProperties:
|
|
"spi@[0-9a-f]+$":
|
|
type: object
|
|
description: GENI serial engine based SPI controller. SPI in master mode
|
|
supports up to 50MHz, up to four chip selects, programmable
|
|
data path from 4 bits to 32 bits and numerous protocol
|
|
variants.
|
|
$ref: /schemas/spi/qcom,spi-geni-qcom.yaml#
|
|
|
|
"i2c@[0-9a-f]+$":
|
|
type: object
|
|
description: GENI serial engine based I2C controller.
|
|
$ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml#
|
|
|
|
"serial@[0-9a-f]+$":
|
|
type: object
|
|
description: GENI Serial Engine based UART Controller.
|
|
$ref: /schemas/serial/qcom,serial-geni-qcom.yaml#
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
geniqup@8c0000 {
|
|
compatible = "qcom,geni-se-qup";
|
|
reg = <0 0x008c0000 0 0x6000>;
|
|
clock-names = "m-ahb", "s-ahb";
|
|
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
|
|
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
i2c0: i2c@a94000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0 0xa94000 0 0x4000>;
|
|
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "se";
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qup_1_i2c_5_active>;
|
|
pinctrl-1 = <&qup_1_i2c_5_sleep>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
uart0: serial@a88000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0 0xa88000 0 0x7000>;
|
|
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "se";
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qup_1_uart_3_active>;
|
|
pinctrl-1 = <&qup_1_uart_3_sleep>;
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|