linuxdebug/Documentation/devicetree/bindings/regulator/pfuze100.yaml

193 lines
5.7 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/pfuze100.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: PFUZE100 family of regulators
maintainers:
- Robin Gong <yibin.gong@nxp.com>
description: |
The valid names for regulators are:
--PFUZE100
sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
--PFUZE200
sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6,coin
--PFUZE3000
sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
--PFUZE3001
sw1,sw2,sw3,vsnvs,vldo1,vldo2,vccsd,v33,vldo3,vldo4
Each regulator is defined using the standard binding for regulators.
properties:
$nodename:
pattern: "^pmic@[0-9]$"
compatible:
enum:
- fsl,pfuze100
- fsl,pfuze200
- fsl,pfuze3000
- fsl,pfuze3001
reg:
maxItems: 1
fsl,pfuze-support-disable-sw:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Boolean, if present disable all unused switch regulators to save power
consumption. Attention, ensure that all important regulators
(e.g. DDR ref, DDR supply) has set the "regulator-always-on" property.
If not present, the switched regulators are always on and can't be
disabled. This binding is a workaround to keep backward compatibility
with old dtb's which rely on the fact that the switched regulators are
always on and don't mark them explicit as "regulator-always-on".
fsl,pmic-stby-poweroff:
$ref: /schemas/types.yaml#/definitions/flag
description: |
if present, configure the PMIC to shutdown all
power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
Use this option if the SoC should be powered off by external power management
IC (PMIC) on PMIC_STBY_REQ signal.
As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
regulators:
type: object
description: |
list of regulators provided by this controller.
patternProperties:
"^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
$ref: "regulator.yaml#"
type: object
"^vgen[1-6]$":
$ref: "regulator.yaml#"
type: object
"^vldo[1-4]$":
$ref: "regulator.yaml#"
type: object
"^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
$ref: "regulator.yaml#"
type: object
additionalProperties: false
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};