142 lines
3.5 KiB
YAML
142 lines
3.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/regulator/maxim,max8973.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Maxim MAX8973/MAX77621 voltage regulator
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: regulator.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- maxim,max8973
|
|
- maxim,max77621
|
|
|
|
junction-warn-millicelsius:
|
|
description: |
|
|
Junction warning temperature threshold in millicelsius. If die
|
|
temperature crosses this level then device generates the warning
|
|
interrupts.
|
|
Please note that thermal functionality is only supported on MAX77621. The
|
|
supported threshold warning temperature for MAX77621 are 120 degC and 140
|
|
degC.
|
|
|
|
maxim,dvs-gpio:
|
|
maxItems: 1
|
|
description: |
|
|
GPIO which is connected to DVS pin of device.
|
|
|
|
maxim,dvs-default-state:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
description: |
|
|
Default state of GPIO during initialisation.
|
|
1 for HIGH and 0 for LOW.
|
|
|
|
maxim,externally-enable:
|
|
type: boolean
|
|
description: |
|
|
Externally control the regulator output enable/disable.
|
|
|
|
maxim,enable-gpio:
|
|
maxItems: 1
|
|
description: |
|
|
GPIO for enable control. If the valid GPIO is provided then externally
|
|
enable control will be considered.
|
|
|
|
maxim,enable-remote-sense:
|
|
type: boolean
|
|
description: Enable remote sense.
|
|
|
|
maxim,enable-falling-slew-rate:
|
|
type: boolean
|
|
description: Enable falling slew rate.
|
|
|
|
maxim,enable-active-discharge:
|
|
type: boolean
|
|
description: Eable active discharge.
|
|
|
|
maxim,enable-frequency-shift:
|
|
type: boolean
|
|
description: Enable 9% frequency shift.
|
|
|
|
maxim,enable-bias-control:
|
|
type: boolean
|
|
description: |
|
|
Enable bias control which can reduce the startup delay to 20us from 220us.
|
|
|
|
maxim,enable-etr:
|
|
type: boolean
|
|
description: Enable Enhanced Transient Response.
|
|
|
|
maxim,enable-high-etr-sensitivity:
|
|
type: boolean
|
|
description: |
|
|
Enhanced transient response circuit is enabled and set for high
|
|
sensitivity. If this property is available then etr will be enable
|
|
default.
|
|
Enhanced transient response (ETR) will affect the configuration of CKADV.
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
regulator@1b {
|
|
compatible = "maxim,max8973";
|
|
reg = <0x1b>;
|
|
|
|
regulator-min-microvolt = <935000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
regulator@1b {
|
|
compatible = "maxim,max77621";
|
|
reg = <0x1b>;
|
|
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1231250>;
|
|
regulator-name = "PPVAR_CPU";
|
|
regulator-ramp-delay = <12500>;
|
|
maxim,dvs-default-state = <1>;
|
|
maxim,enable-active-discharge;
|
|
maxim,enable-bias-control;
|
|
maxim,enable-etr;
|
|
maxim,enable-gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
|
|
maxim,externally-enable;
|
|
};
|
|
};
|