linuxdebug/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml

82 lines
2.0 KiB
YAML

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim 17042 fuel gauge series
maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- $ref: power-supply.yaml#
properties:
compatible:
enum:
- maxim,max17042
- maxim,max17047
- maxim,max17050
- maxim,max17055
- maxim,max77849-battery
reg:
maxItems: 1
interrupts:
maxItems: 1
description: |
The ALRT pin, an open-drain interrupt.
maxim,rsns-microohm:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
Defining this property enables current-sense functionality.
maxim,cold-temp:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Temperature threshold to report battery as cold (in tenths of degree Celsius).
Default is not to report cold events.
maxim,over-heat-temp:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Temperature threshold to report battery as over heated (in tenths of degree Celsius).
Default is not to report over heating events.
maxim,dead-volt:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Voltage threshold to report battery as dead (in mV).
Default is not to report dead battery events.
maxim,over-volt:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Voltage threshold to report battery as over voltage (in mV).
Default is not to report over-voltage events.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
battery@36 {
compatible = "maxim,max17042";
reg = <0x36>;
maxim,rsns-microohm = <10000>;
maxim,over-heat-temp = <600>;
maxim,over-volt = <4300>;
};
};