469 lines
18 KiB
YAML
469 lines
18 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
|
|
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies ath11k wireless devices Generic Binding
|
|
|
|
maintainers:
|
|
- Kalle Valo <kvalo@kernel.org>
|
|
|
|
description: |
|
|
These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
|
|
devices, for example like AHB based IPQ8074.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,ipq8074-wifi
|
|
- qcom,ipq6018-wifi
|
|
- qcom,wcn6750-wifi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
minItems: 32
|
|
maxItems: 52
|
|
|
|
interrupt-names:
|
|
maxItems: 52
|
|
|
|
qcom,rproc:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
DT entry of q6v5-wcss remoteproc driver.
|
|
Phandle to a node that can contain the following properties
|
|
* compatible
|
|
* reg
|
|
* reg-names
|
|
|
|
qcom,ath11k-calibration-variant:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description:
|
|
string to uniquely identify variant of the calibration data in the
|
|
board-2.bin for designs with colliding bus and device specific ids
|
|
|
|
memory-region:
|
|
minItems: 1
|
|
maxItems: 2
|
|
description:
|
|
phandle to a node describing reserved memory (System RAM memory)
|
|
used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
|
|
|
|
iommus:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
wifi-firmware:
|
|
type: object
|
|
description: |
|
|
WCN6750 wifi node can contain one optional firmware subnode.
|
|
Firmware subnode is needed when the platform does not have Trustzone.
|
|
required:
|
|
- iommus
|
|
|
|
qcom,smem-states:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
description: State bits used by the AP to signal the WLAN Q6.
|
|
items:
|
|
- description: Signal bits used to enable/disable low power mode
|
|
on WCN6750 in the case of WoW (Wake on Wireless).
|
|
|
|
qcom,smem-state-names:
|
|
description: The names of the state bits used for SMP2P output.
|
|
items:
|
|
- const: wlan-smp2p-out
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- qcom,rproc
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq8074-wifi
|
|
- qcom,ipq6018-wifi
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
items:
|
|
- description: misc-pulse1 interrupt events
|
|
- description: misc-latch interrupt events
|
|
- description: sw exception interrupt events
|
|
- description: watchdog interrupt events
|
|
- description: interrupt event for ring CE0
|
|
- description: interrupt event for ring CE1
|
|
- description: interrupt event for ring CE2
|
|
- description: interrupt event for ring CE3
|
|
- description: interrupt event for ring CE4
|
|
- description: interrupt event for ring CE5
|
|
- description: interrupt event for ring CE6
|
|
- description: interrupt event for ring CE7
|
|
- description: interrupt event for ring CE8
|
|
- description: interrupt event for ring CE9
|
|
- description: interrupt event for ring CE10
|
|
- description: interrupt event for ring CE11
|
|
- description: interrupt event for ring host2wbm-desc-feed
|
|
- description: interrupt event for ring host2reo-re-injection
|
|
- description: interrupt event for ring host2reo-command
|
|
- description: interrupt event for ring host2rxdma-monitor-ring3
|
|
- description: interrupt event for ring host2rxdma-monitor-ring2
|
|
- description: interrupt event for ring host2rxdma-monitor-ring1
|
|
- description: interrupt event for ring reo2ost-exception
|
|
- description: interrupt event for ring wbm2host-rx-release
|
|
- description: interrupt event for ring reo2host-status
|
|
- description: interrupt event for ring reo2host-destination-ring4
|
|
- description: interrupt event for ring reo2host-destination-ring3
|
|
- description: interrupt event for ring reo2host-destination-ring2
|
|
- description: interrupt event for ring reo2host-destination-ring1
|
|
- description: interrupt event for ring rxdma2host-monitor-destination-mac3
|
|
- description: interrupt event for ring rxdma2host-monitor-destination-mac2
|
|
- description: interrupt event for ring rxdma2host-monitor-destination-mac1
|
|
- description: interrupt event for ring ppdu-end-interrupts-mac3
|
|
- description: interrupt event for ring ppdu-end-interrupts-mac2
|
|
- description: interrupt event for ring ppdu-end-interrupts-mac1
|
|
- description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
|
|
- description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
|
|
- description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
|
|
- description: interrupt event for ring host2rxdma-host-buf-ring-mac3
|
|
- description: interrupt event for ring host2rxdma-host-buf-ring-mac2
|
|
- description: interrupt event for ring host2rxdma-host-buf-ring-mac1
|
|
- description: interrupt event for ring rxdma2host-destination-ring-mac3
|
|
- description: interrupt event for ring rxdma2host-destination-ring-mac2
|
|
- description: interrupt event for ring rxdma2host-destination-ring-mac1
|
|
- description: interrupt event for ring host2tcl-input-ring4
|
|
- description: interrupt event for ring host2tcl-input-ring3
|
|
- description: interrupt event for ring host2tcl-input-ring2
|
|
- description: interrupt event for ring host2tcl-input-ring1
|
|
- description: interrupt event for ring wbm2host-tx-completions-ring3
|
|
- description: interrupt event for ring wbm2host-tx-completions-ring2
|
|
- description: interrupt event for ring wbm2host-tx-completions-ring1
|
|
- description: interrupt event for ring tcl2host-status-ring
|
|
interrupt-names:
|
|
items:
|
|
- const: misc-pulse1
|
|
- const: misc-latch
|
|
- const: sw-exception
|
|
- const: watchdog
|
|
- const: ce0
|
|
- const: ce1
|
|
- const: ce2
|
|
- const: ce3
|
|
- const: ce4
|
|
- const: ce5
|
|
- const: ce6
|
|
- const: ce7
|
|
- const: ce8
|
|
- const: ce9
|
|
- const: ce10
|
|
- const: ce11
|
|
- const: host2wbm-desc-feed
|
|
- const: host2reo-re-injection
|
|
- const: host2reo-command
|
|
- const: host2rxdma-monitor-ring3
|
|
- const: host2rxdma-monitor-ring2
|
|
- const: host2rxdma-monitor-ring1
|
|
- const: reo2ost-exception
|
|
- const: wbm2host-rx-release
|
|
- const: reo2host-status
|
|
- const: reo2host-destination-ring4
|
|
- const: reo2host-destination-ring3
|
|
- const: reo2host-destination-ring2
|
|
- const: reo2host-destination-ring1
|
|
- const: rxdma2host-monitor-destination-mac3
|
|
- const: rxdma2host-monitor-destination-mac2
|
|
- const: rxdma2host-monitor-destination-mac1
|
|
- const: ppdu-end-interrupts-mac3
|
|
- const: ppdu-end-interrupts-mac2
|
|
- const: ppdu-end-interrupts-mac1
|
|
- const: rxdma2host-monitor-status-ring-mac3
|
|
- const: rxdma2host-monitor-status-ring-mac2
|
|
- const: rxdma2host-monitor-status-ring-mac1
|
|
- const: host2rxdma-host-buf-ring-mac3
|
|
- const: host2rxdma-host-buf-ring-mac2
|
|
- const: host2rxdma-host-buf-ring-mac1
|
|
- const: rxdma2host-destination-ring-mac3
|
|
- const: rxdma2host-destination-ring-mac2
|
|
- const: rxdma2host-destination-ring-mac1
|
|
- const: host2tcl-input-ring4
|
|
- const: host2tcl-input-ring3
|
|
- const: host2tcl-input-ring2
|
|
- const: host2tcl-input-ring1
|
|
- const: wbm2host-tx-completions-ring3
|
|
- const: wbm2host-tx-completions-ring2
|
|
- const: wbm2host-tx-completions-ring1
|
|
- const: tcl2host-status-ring
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq8074-wifi
|
|
- qcom,ipq6018-wifi
|
|
then:
|
|
required:
|
|
- interrupt-names
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,wcn6750-wifi
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
items:
|
|
- description: interrupt event for ring CE1
|
|
- description: interrupt event for ring CE2
|
|
- description: interrupt event for ring CE3
|
|
- description: interrupt event for ring CE4
|
|
- description: interrupt event for ring CE5
|
|
- description: interrupt event for ring CE6
|
|
- description: interrupt event for ring CE7
|
|
- description: interrupt event for ring CE8
|
|
- description: interrupt event for ring CE9
|
|
- description: interrupt event for ring CE10
|
|
- description: interrupt event for ring DP1
|
|
- description: interrupt event for ring DP2
|
|
- description: interrupt event for ring DP3
|
|
- description: interrupt event for ring DP4
|
|
- description: interrupt event for ring DP5
|
|
- description: interrupt event for ring DP6
|
|
- description: interrupt event for ring DP7
|
|
- description: interrupt event for ring DP8
|
|
- description: interrupt event for ring DP9
|
|
- description: interrupt event for ring DP10
|
|
- description: interrupt event for ring DP11
|
|
- description: interrupt event for ring DP12
|
|
- description: interrupt event for ring DP13
|
|
- description: interrupt event for ring DP14
|
|
- description: interrupt event for ring DP15
|
|
- description: interrupt event for ring DP16
|
|
- description: interrupt event for ring DP17
|
|
- description: interrupt event for ring DP18
|
|
- description: interrupt event for ring DP19
|
|
- description: interrupt event for ring DP20
|
|
- description: interrupt event for ring DP21
|
|
- description: interrupt event for ring DP22
|
|
|
|
examples:
|
|
- |
|
|
|
|
q6v5_wcss: q6v5_wcss@CD00000 {
|
|
compatible = "qcom,ipq8074-wcss-pil";
|
|
reg = <0xCD00000 0x4040>,
|
|
<0x4AB000 0x20>;
|
|
reg-names = "qdsp6",
|
|
"rmb";
|
|
};
|
|
|
|
wifi0: wifi@c000000 {
|
|
compatible = "qcom,ipq8074-wifi";
|
|
reg = <0xc000000 0x2000000>;
|
|
interrupts = <0 320 1>,
|
|
<0 319 1>,
|
|
<0 318 1>,
|
|
<0 317 1>,
|
|
<0 316 1>,
|
|
<0 315 1>,
|
|
<0 314 1>,
|
|
<0 311 1>,
|
|
<0 310 1>,
|
|
<0 411 1>,
|
|
<0 410 1>,
|
|
<0 40 1>,
|
|
<0 39 1>,
|
|
<0 302 1>,
|
|
<0 301 1>,
|
|
<0 37 1>,
|
|
<0 36 1>,
|
|
<0 296 1>,
|
|
<0 295 1>,
|
|
<0 294 1>,
|
|
<0 293 1>,
|
|
<0 292 1>,
|
|
<0 291 1>,
|
|
<0 290 1>,
|
|
<0 289 1>,
|
|
<0 288 1>,
|
|
<0 239 1>,
|
|
<0 236 1>,
|
|
<0 235 1>,
|
|
<0 234 1>,
|
|
<0 233 1>,
|
|
<0 232 1>,
|
|
<0 231 1>,
|
|
<0 230 1>,
|
|
<0 229 1>,
|
|
<0 228 1>,
|
|
<0 224 1>,
|
|
<0 223 1>,
|
|
<0 203 1>,
|
|
<0 183 1>,
|
|
<0 180 1>,
|
|
<0 179 1>,
|
|
<0 178 1>,
|
|
<0 177 1>,
|
|
<0 176 1>,
|
|
<0 163 1>,
|
|
<0 162 1>,
|
|
<0 160 1>,
|
|
<0 159 1>,
|
|
<0 158 1>,
|
|
<0 157 1>,
|
|
<0 156 1>;
|
|
interrupt-names = "misc-pulse1",
|
|
"misc-latch",
|
|
"sw-exception",
|
|
"watchdog",
|
|
"ce0",
|
|
"ce1",
|
|
"ce2",
|
|
"ce3",
|
|
"ce4",
|
|
"ce5",
|
|
"ce6",
|
|
"ce7",
|
|
"ce8",
|
|
"ce9",
|
|
"ce10",
|
|
"ce11",
|
|
"host2wbm-desc-feed",
|
|
"host2reo-re-injection",
|
|
"host2reo-command",
|
|
"host2rxdma-monitor-ring3",
|
|
"host2rxdma-monitor-ring2",
|
|
"host2rxdma-monitor-ring1",
|
|
"reo2ost-exception",
|
|
"wbm2host-rx-release",
|
|
"reo2host-status",
|
|
"reo2host-destination-ring4",
|
|
"reo2host-destination-ring3",
|
|
"reo2host-destination-ring2",
|
|
"reo2host-destination-ring1",
|
|
"rxdma2host-monitor-destination-mac3",
|
|
"rxdma2host-monitor-destination-mac2",
|
|
"rxdma2host-monitor-destination-mac1",
|
|
"ppdu-end-interrupts-mac3",
|
|
"ppdu-end-interrupts-mac2",
|
|
"ppdu-end-interrupts-mac1",
|
|
"rxdma2host-monitor-status-ring-mac3",
|
|
"rxdma2host-monitor-status-ring-mac2",
|
|
"rxdma2host-monitor-status-ring-mac1",
|
|
"host2rxdma-host-buf-ring-mac3",
|
|
"host2rxdma-host-buf-ring-mac2",
|
|
"host2rxdma-host-buf-ring-mac1",
|
|
"rxdma2host-destination-ring-mac3",
|
|
"rxdma2host-destination-ring-mac2",
|
|
"rxdma2host-destination-ring-mac1",
|
|
"host2tcl-input-ring4",
|
|
"host2tcl-input-ring3",
|
|
"host2tcl-input-ring2",
|
|
"host2tcl-input-ring1",
|
|
"wbm2host-tx-completions-ring3",
|
|
"wbm2host-tx-completions-ring2",
|
|
"wbm2host-tx-completions-ring1",
|
|
"tcl2host-status-ring";
|
|
qcom,rproc = <&q6v5_wcss>;
|
|
};
|
|
|
|
- |
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
qcn9074_0: qcn9074_0@51100000 {
|
|
no-map;
|
|
reg = <0x0 0x51100000 0x0 0x03500000>;
|
|
};
|
|
};
|
|
|
|
pci {
|
|
pcie0 {
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
|
|
wifi_0: wifi@0 {
|
|
reg = <0 0 0 0 0>;
|
|
memory-region = <&qcn9074_0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
wlan_ce_mem: memory@4cd000 {
|
|
no-map;
|
|
reg = <0x0 0x004cd000 0x0 0x1000>;
|
|
};
|
|
|
|
wlan_fw_mem: memory@80c00000 {
|
|
no-map;
|
|
reg = <0x0 0x80c00000 0x0 0xc00000>;
|
|
};
|
|
};
|
|
|
|
wifi: wifi@17a10040 {
|
|
compatible = "qcom,wcn6750-wifi";
|
|
reg = <0x17a10040 0x0>;
|
|
iommus = <&apps_smmu 0x1c00 0x1>;
|
|
interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,rproc = <&remoteproc_wpss>;
|
|
memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
|
|
qcom,smem-states = <&wlan_smp2p_out 0>;
|
|
qcom,smem-state-names = "wlan-smp2p-out";
|
|
wifi-firmware {
|
|
iommus = <&apps_smmu 0x1c02 0x1>;
|
|
};
|
|
};
|