122 lines
3.1 KiB
YAML
122 lines
3.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/adc/atmel,sama9260-adc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: AT91 sama9260 and similar Analog to Digital Converter (ADC)
|
|
|
|
maintainers:
|
|
- Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- atmel,at91sam9260-adc
|
|
- atmel,at91sam9rl-adc
|
|
- atmel,at91sam9g45-adc
|
|
- atmel,at91sam9x5-adc
|
|
- atmel,at91sama5d3-adc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
clock-names:
|
|
items:
|
|
- const: adc_clk
|
|
- const: adc_op_clk
|
|
|
|
atmel,adc-channels-used:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Bitmask of the channels muxed and enabled for this device
|
|
|
|
atmel,adc-startup-time:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Startup Time of the ADC in microseconds as defined in the datasheet
|
|
|
|
atmel,adc-vref:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Reference voltage in millivolts for the conversions
|
|
|
|
atmel,adc-use-external-triggers:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: Enable the external triggers
|
|
|
|
atmel,adc-use-res:
|
|
$ref: /schemas/types.yaml#/definitions/string
|
|
description:
|
|
String corresponding to an identifier from atmel,adc-res-names property.
|
|
If not specified, the highest resolution will be used.
|
|
enum:
|
|
- "lowres"
|
|
- "highres"
|
|
|
|
atmel,adc-sleep-mode:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: Enable sleep mode when no conversion
|
|
|
|
atmel,adc-sample-hold-time:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Sample and Hold Time in microseconds
|
|
|
|
atmel,adc-ts-wires:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
Number of touchscreen wires. Must be set to enable touchscreen.
|
|
NOTE: when adc touchscreen is enabled, the adc hardware trigger will be
|
|
disabled. Since touchscreen will occupy the trigger register.
|
|
enum:
|
|
- 4
|
|
- 5
|
|
|
|
atmel,adc-ts-pressure-threshold:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Pressure threshold for touchscreen.
|
|
|
|
"#io-channel-cells":
|
|
const: 1
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- atmel,adc-channels-used
|
|
- atmel,adc-startup-time
|
|
- atmel,adc-vref
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/dma/at91.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
adc@fffb0000 {
|
|
compatible = "atmel,at91sam9260-adc";
|
|
reg = <0xfffb0000 0x100>;
|
|
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
clocks = <&adc_clk>, <&adc_op_clk>;
|
|
clock-names = "adc_clk", "adc_op_clk";
|
|
atmel,adc-channels-used = <0xff>;
|
|
atmel,adc-startup-time = <40>;
|
|
atmel,adc-use-external-triggers;
|
|
atmel,adc-vref = <3300>;
|
|
atmel,adc-use-res = "lowres";
|
|
};
|
|
};
|
|
...
|