139 lines
3.2 KiB
YAML
139 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics STM32 DSI host controller
|
|
|
|
maintainers:
|
|
- Philippe Cornu <philippe.cornu@foss.st.com>
|
|
- Yannick Fertre <yannick.fertre@foss.st.com>
|
|
|
|
description:
|
|
The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
|
|
|
|
allOf:
|
|
- $ref: dsi-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: st,stm32-dsi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: Module Clock
|
|
- description: DSI bus clock
|
|
- description: Pixel clock
|
|
minItems: 2
|
|
|
|
clock-names:
|
|
items:
|
|
- const: pclk
|
|
- const: ref
|
|
- const: px_clk
|
|
minItems: 2
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
reset-names:
|
|
items:
|
|
- const: apb
|
|
|
|
phy-dsi-supply:
|
|
description:
|
|
Phandle of the regulator that provides the supply voltage.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
DSI input port node, connected to the ltdc rgb output port.
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
unevaluatedProperties: false
|
|
description: |
|
|
DSI output port node, connected to a panel or a bridge input port.
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
properties:
|
|
data-lanes:
|
|
minItems: 1
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
|
|
required:
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- ports
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/stm32mp1-clks.h>
|
|
#include <dt-bindings/reset/stm32mp1-resets.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
dsi: dsi@5a000000 {
|
|
compatible = "st,stm32-dsi";
|
|
reg = <0x5a000000 0x800>;
|
|
clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
|
|
clock-names = "pclk", "ref", "px_clk";
|
|
resets = <&rcc DSI_R>;
|
|
reset-names = "apb";
|
|
phy-dsi-supply = <®18>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi_in: endpoint {
|
|
remote-endpoint = <<dc_ep1_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel@0 {
|
|
compatible = "orisetech,otm8009a";
|
|
reg = <0>;
|
|
reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
|
|
power-supply = <&v3v3>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dsi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|