124 lines
3.4 KiB
YAML
124 lines
3.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Common Properties for Serial ATA AHCI controllers
|
|
|
|
maintainers:
|
|
- Hans de Goede <hdegoede@redhat.com>
|
|
- Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
|
|
description:
|
|
This document defines device tree properties for a common AHCI SATA
|
|
controller implementation. It's hardware interface is supposed to
|
|
conform to the technical standard defined by Intel (see Serial ATA
|
|
Advanced Host Controller Interface specification for details). The
|
|
document doesn't constitute a DT-node binding by itself but merely
|
|
defines a set of common properties for the AHCI-compatible devices.
|
|
|
|
select: false
|
|
|
|
allOf:
|
|
- $ref: sata-common.yaml#
|
|
|
|
properties:
|
|
reg:
|
|
description:
|
|
Generic AHCI registers space conforming to the Serial ATA AHCI
|
|
specification.
|
|
|
|
reg-names:
|
|
description: CSR space IDs
|
|
contains:
|
|
const: ahci
|
|
|
|
interrupts:
|
|
description:
|
|
Generic AHCI state change interrupt. Can be implemented either as a
|
|
single line attached to the controller or as a set of the signals
|
|
indicating the particular port events.
|
|
minItems: 1
|
|
maxItems: 32
|
|
|
|
ahci-supply:
|
|
description: Power regulator for AHCI controller
|
|
|
|
target-supply:
|
|
description: Power regulator for SATA target device
|
|
|
|
phy-supply:
|
|
description: Power regulator for SATA PHY
|
|
|
|
phys:
|
|
description: Reference to the SATA PHY node
|
|
maxItems: 1
|
|
|
|
phy-names:
|
|
const: sata-phy
|
|
|
|
hba-cap:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description:
|
|
Bitfield of the HBA generic platform capabilities like Staggered
|
|
Spin-up or Mechanical Presence Switch support. It can be used to
|
|
appropriately initialize the HWinit fields of the HBA CAP register
|
|
in case if the system firmware hasn't done it.
|
|
|
|
ports-implemented:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description:
|
|
Mask that indicates which ports the HBA supports. Useful if PI is not
|
|
programmed by the BIOS, which is true for some embedded SoC's.
|
|
|
|
patternProperties:
|
|
"^sata-port@[0-9a-f]+$":
|
|
$ref: '#/$defs/ahci-port'
|
|
description:
|
|
It is optionally possible to describe the ports as sub-nodes so
|
|
to enable each port independently when dealing with multiple PHYs.
|
|
|
|
required:
|
|
- reg
|
|
- interrupts
|
|
|
|
additionalProperties: true
|
|
|
|
$defs:
|
|
ahci-port:
|
|
$ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
|
|
|
|
properties:
|
|
reg:
|
|
description:
|
|
AHCI SATA port identifier. By design AHCI controller can't have
|
|
more than 32 ports due to the CAP.NP fields and PI register size
|
|
constraints.
|
|
minimum: 0
|
|
maximum: 31
|
|
|
|
phys:
|
|
description: Individual AHCI SATA port PHY
|
|
maxItems: 1
|
|
|
|
phy-names:
|
|
description: AHCI SATA port PHY ID
|
|
const: sata-phy
|
|
|
|
target-supply:
|
|
description: Power regulator for SATA port target device
|
|
|
|
hba-port-cap:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description:
|
|
Bitfield of the HBA port-specific platform capabilities like Hot
|
|
plugging, eSATA, FIS-based Switching, etc (see AHCI specification
|
|
for details). It can be used to initialize the HWinit fields of
|
|
the PxCMD register in case if the system firmware hasn't done it.
|
|
|
|
required:
|
|
- reg
|
|
|
|
...
|