545 lines
23 KiB
Plaintext
545 lines
23 KiB
Plaintext
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file shows ASIC health status. The possible values are:
|
|
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on carrier and switch boards.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
|
|
Date: December 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file shows the system fans direction:
|
|
forward direction - relevant bit is set 0;
|
|
reversed direction - relevant bit is set 1.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on LED or Gearbox board.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files enable and disable the access to the JTAG domain.
|
|
By default access to the JTAG domain is disabled.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows iio devices selection.
|
|
|
|
Attribute select_iio can be written with 0 or with 1. It
|
|
selects which one of iio devices can be accessed.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow asserting system power cycling, switching
|
|
power supply units on and off and system's main power domain
|
|
shutdown.
|
|
Expected behavior:
|
|
When pwr_cycle is written 1: auxiliary power domain will go
|
|
down and after short period (about 1 second) up.
|
|
When psu1_on or psu2_on is written 1, related unit will be
|
|
disconnected from the power source, when written 0 - connected.
|
|
If both are written 1 - power supplies main power domain will
|
|
go down.
|
|
When pwr_down is written 1, system's main power domain will go
|
|
down.
|
|
|
|
The files are write only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
|
|
Date: June 2018
|
|
KernelVersion: 4.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show the system reset cause, as following: power
|
|
auxiliary outage or power refresh, ASIC thermal shutdown, halt,
|
|
hotswap, watchdog, firmware reset, long press power button,
|
|
short press power button, software reset. Value 1 in file means
|
|
this is reset cause, 0 - otherwise. Only one of the above
|
|
causes could be 1 at the same time, representing only last
|
|
reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show the system reset cause, as following: ComEx
|
|
power fail, reset from ComEx, system platform reset, reset
|
|
due to voltage monitor devices upgrade failure,
|
|
Value 1 in file means this is reset cause, 0 - otherwise.
|
|
Only one bit could be 1 at the same time, representing only
|
|
the last reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
|
|
Date: November 2018
|
|
KernelVersion: 5.0
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which CPLD versions have been burned
|
|
on LED board.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
|
|
Date: June 2019
|
|
KernelVersion: 5.3
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show the system reset cause, as following:
|
|
COMEX thermal shutdown; wathchdog power off or reset was derived
|
|
by one of the next components: COMEX, switch board or by Small Form
|
|
Factor mezzanine, reset requested from ASIC, reset caused by BIOS
|
|
reload. Value 1 in file means this is reset cause, 0 - otherwise.
|
|
Only one of the above causes could be 1 at the same time, representing
|
|
only last reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show system static topology identification
|
|
like system's static I2C topology, number and type of FPGA
|
|
devices within the system and so on.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show the system reset causes, as following: reset
|
|
due to AC power failure, reset invoked from software by
|
|
assertion reset signal through CPLD. reset caused by signal
|
|
asserted by SOC through ACPI register, reset invoked from
|
|
software by assertion power off signal through CPLD.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows to retain ASIC up during PCIe root complex
|
|
reset, when attribute is set 1.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows to overwrite system VPD hardware write
|
|
protection when attribute is set 1.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file exposes the configuration update status of burnable
|
|
voltage regulator devices. The status values are as following:
|
|
0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file exposes the firmware version of burnable voltage
|
|
regulator devices.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
|
|
Date: July 2020
|
|
KernelVersion: 5.9
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which CPLD part numbers and minor
|
|
versions have been burned CPLD devices equipped on a
|
|
system.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: The files represent BIOS statuses:
|
|
|
|
bios_active_image: location of current active BIOS image:
|
|
0: Top, 1: Bottom.
|
|
The reported value should correspond to value expected by OS
|
|
in case of BIOS safe mode is 0. This bit is related to Intel
|
|
top-swap feature of DualBios on the same flash.
|
|
|
|
bios_auth_fail: BIOS upgrade is failed because provided BIOS
|
|
image is not signed correctly.
|
|
|
|
bios_upgrade_fail: BIOS upgrade is failed by some other
|
|
reason not because authentication. For example due to
|
|
physical SPI flash problem.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow line cards enable state control.
|
|
Expected behavior:
|
|
When lc{n}_enable is written 1, related line card is released
|
|
from the reset state, when 0 - is hold in reset state.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files switching line cards power on and off.
|
|
Expected behavior:
|
|
When lc{n}_pwr is written 1, related line card is powered
|
|
on, when written 0 - powered off.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files clear line card reset bit enforced by ASIC, when it
|
|
sets it due to some abnormal ASIC behavior.
|
|
Expected behavior:
|
|
When lc{n}_rst_mask is written 1, related line card reset bit
|
|
is cleared, when written 0 - no effect.
|
|
|
|
The files are write only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file, when written 1, indicates to programmable devices
|
|
that OS is taking control over it.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file assigns power management control ownership.
|
|
When power management control is provided by hardware, hardware
|
|
will automatically power off one or more line previously
|
|
powered line cards in case system power budget is getting
|
|
insufficient. It could be in case when some of power units lost
|
|
power good state.
|
|
When pm_mgmt_en is written 1, power management control by
|
|
software is enabled, 0 - power management control by hardware.
|
|
Note that for any setting of pm_mgmt_en attribute hardware will
|
|
not allow to power on any new line card in case system power
|
|
budget is insufficient.
|
|
Same in case software will try to power on several line cards
|
|
at once - hardware will power line cards while system has
|
|
enough power budget.
|
|
Default is 0.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files switching power supply units on and off.
|
|
Expected behavior:
|
|
When psu3_on or psu4_on is written 1, related unit will be
|
|
disconnected from the power source, when written 0 - connected.
|
|
|
|
The files are write only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows to unlock ASIC after thermal shutdown event.
|
|
When system thermal shutdown is enforced by ASIC, ASIC is
|
|
getting locked and after system boot it will not be available.
|
|
Software can decide to unlock it by setting this attribute to
|
|
1 and then perform system power cycle by setting pwr_cycle
|
|
attribute to 1 (power cycle of main power domain).
|
|
Before setting shutdown_unlock to 1 it is recommended to
|
|
validate that system reboot cause is reset_asic_thermal or
|
|
reset_thermal_spc_or_pciesw.
|
|
In case shutdown_unlock is not set 1, the only way to release
|
|
ASIC from locking - is full system power cycle through the
|
|
external power distribution unit.
|
|
Default is 1.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which CPLD major and minor versions
|
|
and part number has been burned CPLD device on line card.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show with which FPGA major and minor versions
|
|
and part number has been burned FPGA device on line card.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allow to overwrite line card VPD hardware write
|
|
protection mode. When attribute is set 1 - write protection is
|
|
disabled, when 0 - enabled.
|
|
Default is 0.
|
|
If the system is in locked-down mode writing this file will not
|
|
be allowed.
|
|
The purpose if this file is to allow line card VPD burning
|
|
during production flow.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files show the line reset cause, as following: power
|
|
auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset
|
|
failed, line card reset failed, power off from chassis.
|
|
Value 1 in file means this is reset cause, 0 - otherwise. Only one of
|
|
the above causes could be 1 at the same time, representing only last
|
|
reset cause.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow CPLD and FPGA burning. Value 1 in file means burning
|
|
is enabled, 0 - otherwise.
|
|
If the system is in locked-down mode writing these files will
|
|
not be allowed.
|
|
The purpose of these files to allow line card CPLD and FPGA
|
|
upgrade through the JTAG daisy-chain.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow to power on/off all QSFP ports and whole line card.
|
|
The attributes are set 1 for power on, 0 - for power off.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow gearboxes and FPGA SPI flash burning.
|
|
The attributes are set 1 to enable burning, 0 - to disable.
|
|
If the system is in locked-down mode writing these files will
|
|
not be allowed.
|
|
The purpose of these files to allow line card Gearboxes and FPGA
|
|
burning during production flow.
|
|
|
|
The file is read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power
|
|
What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config
|
|
Date: October 2021
|
|
KernelVersion: 5.16
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files provide the maximum powered required for line card
|
|
feeding and line card configuration Id.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
|
|
Date: May 2022
|
|
KernelVersion: 5.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows to reset PHY 88E1548 when attribute is set 0
|
|
due to some abnormal PHY behavior.
|
|
Expected behavior:
|
|
When phy_reset is written 1, all PHY 88E1548 are released
|
|
from the reset state, when 0 - are hold in reset state.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
|
|
Date: May 2022
|
|
KernelVersion: 5.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file allows to reset ASIC MT52132 when attribute is set 0
|
|
due to some abnormal ASIC behavior.
|
|
Expected behavior:
|
|
When mac_reset is written 1, the ASIC MT52132 is released
|
|
from the reset state, when 0 - is hold in reset state.
|
|
|
|
The files are read/write.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
|
|
Date: May 2022
|
|
KernelVersion: 5.19
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file shows QSFP ports power status. The value is set to 0
|
|
when one of any QSFP ports is plugged. The value is set to 1 when
|
|
there are no any QSFP ports are plugged.
|
|
The possible values are:
|
|
0 - Power good, 1 - Not power good.
|
|
|
|
The files are read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
|
|
Date: July 2022
|
|
KernelVersion: 5.20
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file shows 2-nd ASIC health status. The possible values are:
|
|
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
|
|
|
|
The file is read only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
|
|
Date: July 2022
|
|
KernelVersion: 5.20
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: These files allow to each of ASICs by writing 1.
|
|
|
|
The files are write only.
|
|
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
|
|
Date: July 2022
|
|
KernelVersion: 5.20
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: This file is used to indicate remote end (for example BMC) that system
|
|
host CPU is ready for sending telemetry data to remote end.
|
|
For indication the file should be written 1.
|
|
|
|
The file is write only.
|
|
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
|
|
Date: January 2020
|
|
KernelVersion: 5.6
|
|
Contact: Vadim Pasternak <vadimp@nvidia.com>
|
|
Description: The file indicates COME module hardware configuration.
|
|
The value is pushed by hardware through GPIO pins.
|
|
The purpose is to expose some minor BOM changes for the same system SKU.
|
|
|
|
The file is read only.
|