3857 lines
96 KiB
C
3857 lines
96 KiB
C
// SPDX-License-Identifier: ISC
|
|
/*
|
|
* Copyright (c) 2005-2011 Atheros Communications Inc.
|
|
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "core.h"
|
|
#include "debug.h"
|
|
#include "coredump.h"
|
|
|
|
#include "targaddrs.h"
|
|
#include "bmi.h"
|
|
|
|
#include "hif.h"
|
|
#include "htc.h"
|
|
|
|
#include "ce.h"
|
|
#include "pci.h"
|
|
|
|
enum ath10k_pci_reset_mode {
|
|
ATH10K_PCI_RESET_AUTO = 0,
|
|
ATH10K_PCI_RESET_WARM_ONLY = 1,
|
|
};
|
|
|
|
static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
|
|
static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
|
|
|
|
module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
|
|
MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
|
|
|
|
module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
|
|
MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
|
|
|
|
/* how long wait to wait for target to initialise, in ms */
|
|
#define ATH10K_PCI_TARGET_WAIT 3000
|
|
#define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
|
|
|
|
/* Maximum number of bytes that can be handled atomically by
|
|
* diag read and write.
|
|
*/
|
|
#define ATH10K_DIAG_TRANSFER_LIMIT 0x5000
|
|
|
|
#define QCA99X0_PCIE_BAR0_START_REG 0x81030
|
|
#define QCA99X0_CPU_MEM_ADDR_REG 0x4d00c
|
|
#define QCA99X0_CPU_MEM_DATA_REG 0x4d010
|
|
|
|
static const struct pci_device_id ath10k_pci_id_table[] = {
|
|
/* PCI-E QCA988X V2 (Ubiquiti branded) */
|
|
{ PCI_VDEVICE(UBIQUITI, QCA988X_2_0_DEVICE_ID_UBNT) },
|
|
|
|
{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA99X0_2_0_DEVICE_ID) }, /* PCI-E QCA99X0 V2 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA9888_2_0_DEVICE_ID) }, /* PCI-E QCA9888 V2 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA9984_1_0_DEVICE_ID) }, /* PCI-E QCA9984 V1 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA9377_1_0_DEVICE_ID) }, /* PCI-E QCA9377 V1 */
|
|
{ PCI_VDEVICE(ATHEROS, QCA9887_1_0_DEVICE_ID) }, /* PCI-E QCA9887 */
|
|
{0}
|
|
};
|
|
|
|
static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
|
|
/* QCA988X pre 2.0 chips are not supported because they need some nasty
|
|
* hacks. ath10k doesn't have them and these devices crash horribly
|
|
* because of that.
|
|
*/
|
|
{ QCA988X_2_0_DEVICE_ID_UBNT, QCA988X_HW_2_0_CHIP_ID_REV },
|
|
{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
|
|
|
|
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
|
|
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_2_CHIP_ID_REV },
|
|
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_3_0_CHIP_ID_REV },
|
|
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_3_1_CHIP_ID_REV },
|
|
{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
|
|
|
|
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
|
|
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_2_CHIP_ID_REV },
|
|
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_0_CHIP_ID_REV },
|
|
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_1_CHIP_ID_REV },
|
|
{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
|
|
|
|
{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
|
|
|
|
{ QCA9984_1_0_DEVICE_ID, QCA9984_HW_1_0_CHIP_ID_REV },
|
|
|
|
{ QCA9888_2_0_DEVICE_ID, QCA9888_HW_2_0_CHIP_ID_REV },
|
|
|
|
{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
|
|
{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
|
|
|
|
{ QCA9887_1_0_DEVICE_ID, QCA9887_HW_1_0_CHIP_ID_REV },
|
|
};
|
|
|
|
static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
|
|
static int ath10k_pci_cold_reset(struct ath10k *ar);
|
|
static int ath10k_pci_safe_chip_reset(struct ath10k *ar);
|
|
static int ath10k_pci_init_irq(struct ath10k *ar);
|
|
static int ath10k_pci_deinit_irq(struct ath10k *ar);
|
|
static int ath10k_pci_request_irq(struct ath10k *ar);
|
|
static void ath10k_pci_free_irq(struct ath10k *ar);
|
|
static int ath10k_pci_bmi_wait(struct ath10k *ar,
|
|
struct ath10k_ce_pipe *tx_pipe,
|
|
struct ath10k_ce_pipe *rx_pipe,
|
|
struct bmi_xfer *xfer);
|
|
static int ath10k_pci_qca99x0_chip_reset(struct ath10k *ar);
|
|
static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state);
|
|
static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
|
|
static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state);
|
|
static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state);
|
|
static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
|
|
static void ath10k_pci_pktlog_rx_cb(struct ath10k_ce_pipe *ce_state);
|
|
|
|
static const struct ce_attr pci_host_ce_config_wlan[] = {
|
|
/* CE0: host->target HTC control and raw streams */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 16,
|
|
.src_sz_max = 256,
|
|
.dest_nentries = 0,
|
|
.send_cb = ath10k_pci_htc_tx_cb,
|
|
},
|
|
|
|
/* CE1: target->host HTT + HTC control */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 512,
|
|
.recv_cb = ath10k_pci_htt_htc_rx_cb,
|
|
},
|
|
|
|
/* CE2: target->host WMI */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 128,
|
|
.recv_cb = ath10k_pci_htc_rx_cb,
|
|
},
|
|
|
|
/* CE3: host->target WMI */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 32,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 0,
|
|
.send_cb = ath10k_pci_htc_tx_cb,
|
|
},
|
|
|
|
/* CE4: host->target HTT */
|
|
{
|
|
.flags = CE_ATTR_FLAGS | CE_ATTR_DIS_INTR,
|
|
.src_nentries = CE_HTT_H2T_MSG_SRC_NENTRIES,
|
|
.src_sz_max = 256,
|
|
.dest_nentries = 0,
|
|
.send_cb = ath10k_pci_htt_tx_cb,
|
|
},
|
|
|
|
/* CE5: target->host HTT (HIF->HTT) */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 512,
|
|
.dest_nentries = 512,
|
|
.recv_cb = ath10k_pci_htt_rx_cb,
|
|
},
|
|
|
|
/* CE6: target autonomous hif_memcpy */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE7: ce_diag, the Diagnostic Window */
|
|
{
|
|
.flags = CE_ATTR_FLAGS | CE_ATTR_POLL,
|
|
.src_nentries = 2,
|
|
.src_sz_max = DIAG_TRANSFER_LIMIT,
|
|
.dest_nentries = 2,
|
|
},
|
|
|
|
/* CE8: target->host pktlog */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 2048,
|
|
.dest_nentries = 128,
|
|
.recv_cb = ath10k_pci_pktlog_rx_cb,
|
|
},
|
|
|
|
/* CE9 target autonomous qcache memcpy */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE10: target autonomous hif memcpy */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
|
|
/* CE11: target autonomous hif memcpy */
|
|
{
|
|
.flags = CE_ATTR_FLAGS,
|
|
.src_nentries = 0,
|
|
.src_sz_max = 0,
|
|
.dest_nentries = 0,
|
|
},
|
|
};
|
|
|
|
/* Target firmware's Copy Engine configuration. */
|
|
static const struct ce_pipe_config pci_target_ce_config_wlan[] = {
|
|
/* CE0: host->target HTC control and raw streams */
|
|
{
|
|
.pipenum = __cpu_to_le32(0),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(256),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE1: target->host HTT + HTC control */
|
|
{
|
|
.pipenum = __cpu_to_le32(1),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE2: target->host WMI */
|
|
{
|
|
.pipenum = __cpu_to_le32(2),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(64),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE3: host->target WMI */
|
|
{
|
|
.pipenum = __cpu_to_le32(3),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE4: host->target HTT */
|
|
{
|
|
.pipenum = __cpu_to_le32(4),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_OUT),
|
|
.nentries = __cpu_to_le32(256),
|
|
.nbytes_max = __cpu_to_le32(256),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* NB: 50% of src nentries, since tx has 2 frags */
|
|
|
|
/* CE5: target->host HTT (HIF->HTT) */
|
|
{
|
|
.pipenum = __cpu_to_le32(5),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(512),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE6: Reserved for target autonomous hif_memcpy */
|
|
{
|
|
.pipenum = __cpu_to_le32(6),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_INOUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(4096),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE7 used only by Host */
|
|
{
|
|
.pipenum = __cpu_to_le32(7),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_INOUT),
|
|
.nentries = __cpu_to_le32(0),
|
|
.nbytes_max = __cpu_to_le32(0),
|
|
.flags = __cpu_to_le32(0),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE8 target->host packtlog */
|
|
{
|
|
.pipenum = __cpu_to_le32(8),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_IN),
|
|
.nentries = __cpu_to_le32(64),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS | CE_ATTR_DIS_INTR),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* CE9 target autonomous qcache memcpy */
|
|
{
|
|
.pipenum = __cpu_to_le32(9),
|
|
.pipedir = __cpu_to_le32(PIPEDIR_INOUT),
|
|
.nentries = __cpu_to_le32(32),
|
|
.nbytes_max = __cpu_to_le32(2048),
|
|
.flags = __cpu_to_le32(CE_ATTR_FLAGS | CE_ATTR_DIS_INTR),
|
|
.reserved = __cpu_to_le32(0),
|
|
},
|
|
|
|
/* It not necessary to send target wlan configuration for CE10 & CE11
|
|
* as these CEs are not actively used in target.
|
|
*/
|
|
};
|
|
|
|
/*
|
|
* Map from service/endpoint to Copy Engine.
|
|
* This table is derived from the CE_PCI TABLE, above.
|
|
* It is passed to the Target at startup for use by firmware.
|
|
*/
|
|
static const struct ce_service_to_pipe pci_target_service_to_ce_map_wlan[] = {
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VO),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BK),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BK),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BE),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_BE),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VI),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_DATA_VI),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_CONTROL),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(3),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_WMI_CONTROL),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(2),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_RSVD_CTRL),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(0),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_RSVD_CTRL),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(1),
|
|
},
|
|
{ /* not used */
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(0),
|
|
},
|
|
{ /* not used */
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_TEST_RAW_STREAMS),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(1),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_HTT_DATA_MSG),
|
|
__cpu_to_le32(PIPEDIR_OUT), /* out = UL = host -> target */
|
|
__cpu_to_le32(4),
|
|
},
|
|
{
|
|
__cpu_to_le32(ATH10K_HTC_SVC_ID_HTT_DATA_MSG),
|
|
__cpu_to_le32(PIPEDIR_IN), /* in = DL = target -> host */
|
|
__cpu_to_le32(5),
|
|
},
|
|
|
|
/* (Additions here) */
|
|
|
|
{ /* must be last */
|
|
__cpu_to_le32(0),
|
|
__cpu_to_le32(0),
|
|
__cpu_to_le32(0),
|
|
},
|
|
};
|
|
|
|
static bool ath10k_pci_is_awake(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
u32 val = ioread32(ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
|
|
RTC_STATE_ADDRESS);
|
|
|
|
return RTC_STATE_V_GET(val) == RTC_STATE_V_ON;
|
|
}
|
|
|
|
static void __ath10k_pci_wake(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
lockdep_assert_held(&ar_pci->ps_lock);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI_PS, "pci ps wake reg refcount %lu awake %d\n",
|
|
ar_pci->ps_wake_refcount, ar_pci->ps_awake);
|
|
|
|
iowrite32(PCIE_SOC_WAKE_V_MASK,
|
|
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
|
|
PCIE_SOC_WAKE_ADDRESS);
|
|
}
|
|
|
|
static void __ath10k_pci_sleep(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
lockdep_assert_held(&ar_pci->ps_lock);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI_PS, "pci ps sleep reg refcount %lu awake %d\n",
|
|
ar_pci->ps_wake_refcount, ar_pci->ps_awake);
|
|
|
|
iowrite32(PCIE_SOC_WAKE_RESET,
|
|
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
|
|
PCIE_SOC_WAKE_ADDRESS);
|
|
ar_pci->ps_awake = false;
|
|
}
|
|
|
|
static int ath10k_pci_wake_wait(struct ath10k *ar)
|
|
{
|
|
int tot_delay = 0;
|
|
int curr_delay = 5;
|
|
|
|
while (tot_delay < PCIE_WAKE_TIMEOUT) {
|
|
if (ath10k_pci_is_awake(ar)) {
|
|
if (tot_delay > PCIE_WAKE_LATE_US)
|
|
ath10k_warn(ar, "device wakeup took %d ms which is unusually long, otherwise it works normally.\n",
|
|
tot_delay / 1000);
|
|
return 0;
|
|
}
|
|
|
|
udelay(curr_delay);
|
|
tot_delay += curr_delay;
|
|
|
|
if (curr_delay < 50)
|
|
curr_delay += 5;
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int ath10k_pci_force_wake(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (ar_pci->pci_ps)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
|
|
if (!ar_pci->ps_awake) {
|
|
iowrite32(PCIE_SOC_WAKE_V_MASK,
|
|
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
|
|
PCIE_SOC_WAKE_ADDRESS);
|
|
|
|
ret = ath10k_pci_wake_wait(ar);
|
|
if (ret == 0)
|
|
ar_pci->ps_awake = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_force_sleep(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
|
|
iowrite32(PCIE_SOC_WAKE_RESET,
|
|
ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS +
|
|
PCIE_SOC_WAKE_ADDRESS);
|
|
ar_pci->ps_awake = false;
|
|
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
}
|
|
|
|
static int ath10k_pci_wake(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (ar_pci->pci_ps == 0)
|
|
return ret;
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI_PS, "pci ps wake refcount %lu awake %d\n",
|
|
ar_pci->ps_wake_refcount, ar_pci->ps_awake);
|
|
|
|
/* This function can be called very frequently. To avoid excessive
|
|
* CPU stalls for MMIO reads use a cache var to hold the device state.
|
|
*/
|
|
if (!ar_pci->ps_awake) {
|
|
__ath10k_pci_wake(ar);
|
|
|
|
ret = ath10k_pci_wake_wait(ar);
|
|
if (ret == 0)
|
|
ar_pci->ps_awake = true;
|
|
}
|
|
|
|
if (ret == 0) {
|
|
ar_pci->ps_wake_refcount++;
|
|
WARN_ON(ar_pci->ps_wake_refcount == 0);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_sleep(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
|
|
if (ar_pci->pci_ps == 0)
|
|
return;
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI_PS, "pci ps sleep refcount %lu awake %d\n",
|
|
ar_pci->ps_wake_refcount, ar_pci->ps_awake);
|
|
|
|
if (WARN_ON(ar_pci->ps_wake_refcount == 0))
|
|
goto skip;
|
|
|
|
ar_pci->ps_wake_refcount--;
|
|
|
|
mod_timer(&ar_pci->ps_timer, jiffies +
|
|
msecs_to_jiffies(ATH10K_PCI_SLEEP_GRACE_PERIOD_MSEC));
|
|
|
|
skip:
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
}
|
|
|
|
static void ath10k_pci_ps_timer(struct timer_list *t)
|
|
{
|
|
struct ath10k_pci *ar_pci = from_timer(ar_pci, t, ps_timer);
|
|
struct ath10k *ar = ar_pci->ar;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI_PS, "pci ps timer refcount %lu awake %d\n",
|
|
ar_pci->ps_wake_refcount, ar_pci->ps_awake);
|
|
|
|
if (ar_pci->ps_wake_refcount > 0)
|
|
goto skip;
|
|
|
|
__ath10k_pci_sleep(ar);
|
|
|
|
skip:
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
}
|
|
|
|
static void ath10k_pci_sleep_sync(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
|
|
if (ar_pci->pci_ps == 0) {
|
|
ath10k_pci_force_sleep(ar);
|
|
return;
|
|
}
|
|
|
|
del_timer_sync(&ar_pci->ps_timer);
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
WARN_ON(ar_pci->ps_wake_refcount > 0);
|
|
__ath10k_pci_sleep(ar);
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
}
|
|
|
|
static void ath10k_bus_pci_write32(struct ath10k *ar, u32 offset, u32 value)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
if (unlikely(offset + sizeof(value) > ar_pci->mem_len)) {
|
|
ath10k_warn(ar, "refusing to write mmio out of bounds at 0x%08x - 0x%08zx (max 0x%08zx)\n",
|
|
offset, offset + sizeof(value), ar_pci->mem_len);
|
|
return;
|
|
}
|
|
|
|
ret = ath10k_pci_wake(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wake target for write32 of 0x%08x at 0x%08x: %d\n",
|
|
value, offset, ret);
|
|
return;
|
|
}
|
|
|
|
iowrite32(value, ar_pci->mem + offset);
|
|
ath10k_pci_sleep(ar);
|
|
}
|
|
|
|
static u32 ath10k_bus_pci_read32(struct ath10k *ar, u32 offset)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (unlikely(offset + sizeof(val) > ar_pci->mem_len)) {
|
|
ath10k_warn(ar, "refusing to read mmio out of bounds at 0x%08x - 0x%08zx (max 0x%08zx)\n",
|
|
offset, offset + sizeof(val), ar_pci->mem_len);
|
|
return 0;
|
|
}
|
|
|
|
ret = ath10k_pci_wake(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wake target for read32 at 0x%08x: %d\n",
|
|
offset, ret);
|
|
return 0xffffffff;
|
|
}
|
|
|
|
val = ioread32(ar_pci->mem + offset);
|
|
ath10k_pci_sleep(ar);
|
|
|
|
return val;
|
|
}
|
|
|
|
inline void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value)
|
|
{
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
|
|
ce->bus_ops->write32(ar, offset, value);
|
|
}
|
|
|
|
inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset)
|
|
{
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
|
|
return ce->bus_ops->read32(ar, offset);
|
|
}
|
|
|
|
u32 ath10k_pci_soc_read32(struct ath10k *ar, u32 addr)
|
|
{
|
|
return ath10k_pci_read32(ar, RTC_SOC_BASE_ADDRESS + addr);
|
|
}
|
|
|
|
void ath10k_pci_soc_write32(struct ath10k *ar, u32 addr, u32 val)
|
|
{
|
|
ath10k_pci_write32(ar, RTC_SOC_BASE_ADDRESS + addr, val);
|
|
}
|
|
|
|
u32 ath10k_pci_reg_read32(struct ath10k *ar, u32 addr)
|
|
{
|
|
return ath10k_pci_read32(ar, PCIE_LOCAL_BASE_ADDRESS + addr);
|
|
}
|
|
|
|
void ath10k_pci_reg_write32(struct ath10k *ar, u32 addr, u32 val)
|
|
{
|
|
ath10k_pci_write32(ar, PCIE_LOCAL_BASE_ADDRESS + addr, val);
|
|
}
|
|
|
|
bool ath10k_pci_irq_pending(struct ath10k *ar)
|
|
{
|
|
u32 cause;
|
|
|
|
/* Check if the shared legacy irq is for us */
|
|
cause = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_CAUSE_ADDRESS);
|
|
if (cause & (PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
void ath10k_pci_disable_and_clear_legacy_irq(struct ath10k *ar)
|
|
{
|
|
/* IMPORTANT: INTR_CLR register has to be set after
|
|
* INTR_ENABLE is set to 0, otherwise interrupt can not be
|
|
* really cleared.
|
|
*/
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
0);
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_CLR_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
/* IMPORTANT: this extra read transaction is required to
|
|
* flush the posted write buffer.
|
|
*/
|
|
(void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS);
|
|
}
|
|
|
|
void ath10k_pci_enable_legacy_irq(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
/* IMPORTANT: this extra read transaction is required to
|
|
* flush the posted write buffer.
|
|
*/
|
|
(void)ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
PCIE_INTR_ENABLE_ADDRESS);
|
|
}
|
|
|
|
static inline const char *ath10k_pci_get_irq_method(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (ar_pci->oper_irq_mode == ATH10K_PCI_IRQ_MSI)
|
|
return "msi";
|
|
|
|
return "legacy";
|
|
}
|
|
|
|
static int __ath10k_pci_rx_post_buf(struct ath10k_pci_pipe *pipe)
|
|
{
|
|
struct ath10k *ar = pipe->hif_ce_state;
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
struct ath10k_ce_pipe *ce_pipe = pipe->ce_hdl;
|
|
struct sk_buff *skb;
|
|
dma_addr_t paddr;
|
|
int ret;
|
|
|
|
skb = dev_alloc_skb(pipe->buf_sz);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
WARN_ONCE((unsigned long)skb->data & 3, "unaligned skb");
|
|
|
|
paddr = dma_map_single(ar->dev, skb->data,
|
|
skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
if (unlikely(dma_mapping_error(ar->dev, paddr))) {
|
|
ath10k_warn(ar, "failed to dma map pci rx buf\n");
|
|
dev_kfree_skb_any(skb);
|
|
return -EIO;
|
|
}
|
|
|
|
ATH10K_SKB_RXCB(skb)->paddr = paddr;
|
|
|
|
spin_lock_bh(&ce->ce_lock);
|
|
ret = ce_pipe->ops->ce_rx_post_buf(ce_pipe, skb, paddr);
|
|
spin_unlock_bh(&ce->ce_lock);
|
|
if (ret) {
|
|
dma_unmap_single(ar->dev, paddr, skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_rx_post_pipe(struct ath10k_pci_pipe *pipe)
|
|
{
|
|
struct ath10k *ar = pipe->hif_ce_state;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
struct ath10k_ce_pipe *ce_pipe = pipe->ce_hdl;
|
|
int ret, num;
|
|
|
|
if (pipe->buf_sz == 0)
|
|
return;
|
|
|
|
if (!ce_pipe->dest_ring)
|
|
return;
|
|
|
|
spin_lock_bh(&ce->ce_lock);
|
|
num = __ath10k_ce_rx_num_free_bufs(ce_pipe);
|
|
spin_unlock_bh(&ce->ce_lock);
|
|
|
|
while (num >= 0) {
|
|
ret = __ath10k_pci_rx_post_buf(pipe);
|
|
if (ret) {
|
|
if (ret == -ENOSPC)
|
|
break;
|
|
ath10k_warn(ar, "failed to post pci rx buf: %d\n", ret);
|
|
mod_timer(&ar_pci->rx_post_retry, jiffies +
|
|
ATH10K_PCI_RX_POST_RETRY_MS);
|
|
break;
|
|
}
|
|
num--;
|
|
}
|
|
}
|
|
|
|
void ath10k_pci_rx_post(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i;
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
ath10k_pci_rx_post_pipe(&ar_pci->pipe_info[i]);
|
|
}
|
|
|
|
void ath10k_pci_rx_replenish_retry(struct timer_list *t)
|
|
{
|
|
struct ath10k_pci *ar_pci = from_timer(ar_pci, t, rx_post_retry);
|
|
struct ath10k *ar = ar_pci->ar;
|
|
|
|
ath10k_pci_rx_post(ar);
|
|
}
|
|
|
|
static u32 ath10k_pci_qca988x_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
|
|
{
|
|
u32 val = 0, region = addr & 0xfffff;
|
|
|
|
val = (ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + CORE_CTRL_ADDRESS)
|
|
& 0x7ff) << 21;
|
|
val |= 0x100000 | region;
|
|
return val;
|
|
}
|
|
|
|
/* Refactor from ath10k_pci_qca988x_targ_cpu_to_ce_addr.
|
|
* Support to access target space below 1M for qca6174 and qca9377.
|
|
* If target space is below 1M, the bit[20] of converted CE addr is 0.
|
|
* Otherwise bit[20] of converted CE addr is 1.
|
|
*/
|
|
static u32 ath10k_pci_qca6174_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
|
|
{
|
|
u32 val = 0, region = addr & 0xfffff;
|
|
|
|
val = (ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS + CORE_CTRL_ADDRESS)
|
|
& 0x7ff) << 21;
|
|
val |= ((addr >= 0x100000) ? 0x100000 : 0) | region;
|
|
return val;
|
|
}
|
|
|
|
static u32 ath10k_pci_qca99x0_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
|
|
{
|
|
u32 val = 0, region = addr & 0xfffff;
|
|
|
|
val = ath10k_pci_read32(ar, PCIE_BAR_REG_ADDRESS);
|
|
val |= 0x100000 | region;
|
|
return val;
|
|
}
|
|
|
|
static u32 ath10k_pci_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (WARN_ON_ONCE(!ar_pci->targ_cpu_to_ce_addr))
|
|
return -ENOTSUPP;
|
|
|
|
return ar_pci->targ_cpu_to_ce_addr(ar, addr);
|
|
}
|
|
|
|
/*
|
|
* Diagnostic read/write access is provided for startup/config/debug usage.
|
|
* Caller must guarantee proper alignment, when applicable, and single user
|
|
* at any moment.
|
|
*/
|
|
static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data,
|
|
int nbytes)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret = 0;
|
|
u32 *buf;
|
|
unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
|
|
struct ath10k_ce_pipe *ce_diag;
|
|
/* Host buffer address in CE space */
|
|
u32 ce_data;
|
|
dma_addr_t ce_data_base = 0;
|
|
void *data_buf;
|
|
int i;
|
|
|
|
mutex_lock(&ar_pci->ce_diag_mutex);
|
|
ce_diag = ar_pci->ce_diag;
|
|
|
|
/*
|
|
* Allocate a temporary bounce buffer to hold caller's data
|
|
* to be DMA'ed from Target. This guarantees
|
|
* 1) 4-byte alignment
|
|
* 2) Buffer in DMA-able space
|
|
*/
|
|
alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
|
|
|
|
data_buf = dma_alloc_coherent(ar->dev, alloc_nbytes, &ce_data_base,
|
|
GFP_ATOMIC);
|
|
if (!data_buf) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
/* The address supplied by the caller is in the
|
|
* Target CPU virtual address space.
|
|
*
|
|
* In order to use this address with the diagnostic CE,
|
|
* convert it from Target CPU virtual address space
|
|
* to CE address space
|
|
*/
|
|
address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
|
|
|
|
remaining_bytes = nbytes;
|
|
ce_data = ce_data_base;
|
|
while (remaining_bytes) {
|
|
nbytes = min_t(unsigned int, remaining_bytes,
|
|
DIAG_TRANSFER_LIMIT);
|
|
|
|
ret = ath10k_ce_rx_post_buf(ce_diag, &ce_data, ce_data);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
/* Request CE to send from Target(!) address to Host buffer */
|
|
ret = ath10k_ce_send(ce_diag, NULL, (u32)address, nbytes, 0, 0);
|
|
if (ret)
|
|
goto done;
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_send_next(ce_diag, NULL) != 0) {
|
|
udelay(DIAG_ACCESS_CE_WAIT_US);
|
|
i += DIAG_ACCESS_CE_WAIT_US;
|
|
|
|
if (i > DIAG_ACCESS_CE_TIMEOUT_US) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_recv_next(ce_diag, (void **)&buf,
|
|
&completed_nbytes) != 0) {
|
|
udelay(DIAG_ACCESS_CE_WAIT_US);
|
|
i += DIAG_ACCESS_CE_WAIT_US;
|
|
|
|
if (i > DIAG_ACCESS_CE_TIMEOUT_US) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (*buf != ce_data) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
remaining_bytes -= nbytes;
|
|
memcpy(data, data_buf, nbytes);
|
|
|
|
address += nbytes;
|
|
data += nbytes;
|
|
}
|
|
|
|
done:
|
|
|
|
if (data_buf)
|
|
dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
|
|
ce_data_base);
|
|
|
|
mutex_unlock(&ar_pci->ce_diag_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_diag_read32(struct ath10k *ar, u32 address, u32 *value)
|
|
{
|
|
__le32 val = 0;
|
|
int ret;
|
|
|
|
ret = ath10k_pci_diag_read_mem(ar, address, &val, sizeof(val));
|
|
*value = __le32_to_cpu(val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __ath10k_pci_diag_read_hi(struct ath10k *ar, void *dest,
|
|
u32 src, u32 len)
|
|
{
|
|
u32 host_addr, addr;
|
|
int ret;
|
|
|
|
host_addr = host_interest_item_address(src);
|
|
|
|
ret = ath10k_pci_diag_read32(ar, host_addr, &addr);
|
|
if (ret != 0) {
|
|
ath10k_warn(ar, "failed to get memcpy hi address for firmware address %d: %d\n",
|
|
src, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read_mem(ar, addr, dest, len);
|
|
if (ret != 0) {
|
|
ath10k_warn(ar, "failed to memcpy firmware memory from %d (%d B): %d\n",
|
|
addr, len, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ath10k_pci_diag_read_hi(ar, dest, src, len) \
|
|
__ath10k_pci_diag_read_hi(ar, dest, HI_ITEM(src), len)
|
|
|
|
int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
|
|
const void *data, int nbytes)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret = 0;
|
|
u32 *buf;
|
|
unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
|
|
struct ath10k_ce_pipe *ce_diag;
|
|
void *data_buf;
|
|
dma_addr_t ce_data_base = 0;
|
|
int i;
|
|
|
|
mutex_lock(&ar_pci->ce_diag_mutex);
|
|
ce_diag = ar_pci->ce_diag;
|
|
|
|
/*
|
|
* Allocate a temporary bounce buffer to hold caller's data
|
|
* to be DMA'ed to Target. This guarantees
|
|
* 1) 4-byte alignment
|
|
* 2) Buffer in DMA-able space
|
|
*/
|
|
alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
|
|
|
|
data_buf = dma_alloc_coherent(ar->dev, alloc_nbytes, &ce_data_base,
|
|
GFP_ATOMIC);
|
|
if (!data_buf) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* The address supplied by the caller is in the
|
|
* Target CPU virtual address space.
|
|
*
|
|
* In order to use this address with the diagnostic CE,
|
|
* convert it from
|
|
* Target CPU virtual address space
|
|
* to
|
|
* CE address space
|
|
*/
|
|
address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
|
|
|
|
remaining_bytes = nbytes;
|
|
while (remaining_bytes) {
|
|
/* FIXME: check cast */
|
|
nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
|
|
|
|
/* Copy caller's data to allocated DMA buf */
|
|
memcpy(data_buf, data, nbytes);
|
|
|
|
/* Set up to receive directly into Target(!) address */
|
|
ret = ath10k_ce_rx_post_buf(ce_diag, &address, address);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
/*
|
|
* Request CE to send caller-supplied data that
|
|
* was copied to bounce buffer to Target(!) address.
|
|
*/
|
|
ret = ath10k_ce_send(ce_diag, NULL, ce_data_base, nbytes, 0, 0);
|
|
if (ret != 0)
|
|
goto done;
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_send_next(ce_diag, NULL) != 0) {
|
|
udelay(DIAG_ACCESS_CE_WAIT_US);
|
|
i += DIAG_ACCESS_CE_WAIT_US;
|
|
|
|
if (i > DIAG_ACCESS_CE_TIMEOUT_US) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
i = 0;
|
|
while (ath10k_ce_completed_recv_next(ce_diag, (void **)&buf,
|
|
&completed_nbytes) != 0) {
|
|
udelay(DIAG_ACCESS_CE_WAIT_US);
|
|
i += DIAG_ACCESS_CE_WAIT_US;
|
|
|
|
if (i > DIAG_ACCESS_CE_TIMEOUT_US) {
|
|
ret = -EBUSY;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (nbytes != completed_nbytes) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
if (*buf != address) {
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
remaining_bytes -= nbytes;
|
|
address += nbytes;
|
|
data += nbytes;
|
|
}
|
|
|
|
done:
|
|
if (data_buf) {
|
|
dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
|
|
ce_data_base);
|
|
}
|
|
|
|
if (ret != 0)
|
|
ath10k_warn(ar, "failed to write diag value at 0x%x: %d\n",
|
|
address, ret);
|
|
|
|
mutex_unlock(&ar_pci->ce_diag_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ath10k_pci_diag_write32(struct ath10k *ar, u32 address, u32 value)
|
|
{
|
|
__le32 val = __cpu_to_le32(value);
|
|
|
|
return ath10k_pci_diag_write_mem(ar, address, &val, sizeof(val));
|
|
}
|
|
|
|
/* Called by lower (CE) layer when a send to Target completes. */
|
|
static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct sk_buff_head list;
|
|
struct sk_buff *skb;
|
|
|
|
__skb_queue_head_init(&list);
|
|
while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
|
|
/* no need to call tx completion for NULL pointers */
|
|
if (skb == NULL)
|
|
continue;
|
|
|
|
__skb_queue_tail(&list, skb);
|
|
}
|
|
|
|
while ((skb = __skb_dequeue(&list)))
|
|
ath10k_htc_tx_completion_handler(ar, skb);
|
|
}
|
|
|
|
static void ath10k_pci_process_rx_cb(struct ath10k_ce_pipe *ce_state,
|
|
void (*callback)(struct ath10k *ar,
|
|
struct sk_buff *skb))
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id];
|
|
struct sk_buff *skb;
|
|
struct sk_buff_head list;
|
|
void *transfer_context;
|
|
unsigned int nbytes, max_nbytes;
|
|
|
|
__skb_queue_head_init(&list);
|
|
while (ath10k_ce_completed_recv_next(ce_state, &transfer_context,
|
|
&nbytes) == 0) {
|
|
skb = transfer_context;
|
|
max_nbytes = skb->len + skb_tailroom(skb);
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
|
|
max_nbytes, DMA_FROM_DEVICE);
|
|
|
|
if (unlikely(max_nbytes < nbytes)) {
|
|
ath10k_warn(ar, "rxed more than expected (nbytes %d, max %d)",
|
|
nbytes, max_nbytes);
|
|
dev_kfree_skb_any(skb);
|
|
continue;
|
|
}
|
|
|
|
skb_put(skb, nbytes);
|
|
__skb_queue_tail(&list, skb);
|
|
}
|
|
|
|
while ((skb = __skb_dequeue(&list))) {
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci rx ce pipe %d len %d\n",
|
|
ce_state->id, skb->len);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci rx: ",
|
|
skb->data, skb->len);
|
|
|
|
callback(ar, skb);
|
|
}
|
|
|
|
ath10k_pci_rx_post_pipe(pipe_info);
|
|
}
|
|
|
|
static void ath10k_pci_process_htt_rx_cb(struct ath10k_ce_pipe *ce_state,
|
|
void (*callback)(struct ath10k *ar,
|
|
struct sk_buff *skb))
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id];
|
|
struct ath10k_ce_pipe *ce_pipe = pipe_info->ce_hdl;
|
|
struct sk_buff *skb;
|
|
struct sk_buff_head list;
|
|
void *transfer_context;
|
|
unsigned int nbytes, max_nbytes, nentries;
|
|
int orig_len;
|
|
|
|
/* No need to acquire ce_lock for CE5, since this is the only place CE5
|
|
* is processed other than init and deinit. Before releasing CE5
|
|
* buffers, interrupts are disabled. Thus CE5 access is serialized.
|
|
*/
|
|
__skb_queue_head_init(&list);
|
|
while (ath10k_ce_completed_recv_next_nolock(ce_state, &transfer_context,
|
|
&nbytes) == 0) {
|
|
skb = transfer_context;
|
|
max_nbytes = skb->len + skb_tailroom(skb);
|
|
|
|
if (unlikely(max_nbytes < nbytes)) {
|
|
ath10k_warn(ar, "rxed more than expected (nbytes %d, max %d)",
|
|
nbytes, max_nbytes);
|
|
continue;
|
|
}
|
|
|
|
dma_sync_single_for_cpu(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
|
|
max_nbytes, DMA_FROM_DEVICE);
|
|
skb_put(skb, nbytes);
|
|
__skb_queue_tail(&list, skb);
|
|
}
|
|
|
|
nentries = skb_queue_len(&list);
|
|
while ((skb = __skb_dequeue(&list))) {
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci rx ce pipe %d len %d\n",
|
|
ce_state->id, skb->len);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci rx: ",
|
|
skb->data, skb->len);
|
|
|
|
orig_len = skb->len;
|
|
callback(ar, skb);
|
|
skb_push(skb, orig_len - skb->len);
|
|
skb_reset_tail_pointer(skb);
|
|
skb_trim(skb, 0);
|
|
|
|
/*let device gain the buffer again*/
|
|
dma_sync_single_for_device(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
|
|
skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
}
|
|
ath10k_ce_rx_update_write_idx(ce_pipe, nentries);
|
|
}
|
|
|
|
/* Called by lower (CE) layer when data is received from the Target. */
|
|
static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
|
|
}
|
|
|
|
static void ath10k_pci_htt_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
/* CE4 polling needs to be done whenever CE pipe which transports
|
|
* HTT Rx (target->host) is processed.
|
|
*/
|
|
ath10k_ce_per_engine_service(ce_state->ar, 4);
|
|
|
|
ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
|
|
}
|
|
|
|
/* Called by lower (CE) layer when data is received from the Target.
|
|
* Only 10.4 firmware uses separate CE to transfer pktlog data.
|
|
*/
|
|
static void ath10k_pci_pktlog_rx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
ath10k_pci_process_rx_cb(ce_state,
|
|
ath10k_htt_rx_pktlog_completion_handler);
|
|
}
|
|
|
|
/* Called by lower (CE) layer when a send to HTT Target completes. */
|
|
static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct sk_buff *skb;
|
|
|
|
while (ath10k_ce_completed_send_next(ce_state, (void **)&skb) == 0) {
|
|
/* no need to call tx completion for NULL pointers */
|
|
if (!skb)
|
|
continue;
|
|
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
|
|
skb->len, DMA_TO_DEVICE);
|
|
ath10k_htt_hif_tx_complete(ar, skb);
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_htt_rx_deliver(struct ath10k *ar, struct sk_buff *skb)
|
|
{
|
|
skb_pull(skb, sizeof(struct ath10k_htc_hdr));
|
|
ath10k_htt_t2h_msg_handler(ar, skb);
|
|
}
|
|
|
|
/* Called by lower (CE) layer when HTT data is received from the Target. */
|
|
static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
/* CE4 polling needs to be done whenever CE pipe which transports
|
|
* HTT Rx (target->host) is processed.
|
|
*/
|
|
ath10k_ce_per_engine_service(ce_state->ar, 4);
|
|
|
|
ath10k_pci_process_htt_rx_cb(ce_state, ath10k_pci_htt_rx_deliver);
|
|
}
|
|
|
|
int ath10k_pci_hif_tx_sg(struct ath10k *ar, u8 pipe_id,
|
|
struct ath10k_hif_sg_item *items, int n_items)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
struct ath10k_pci_pipe *pci_pipe = &ar_pci->pipe_info[pipe_id];
|
|
struct ath10k_ce_pipe *ce_pipe = pci_pipe->ce_hdl;
|
|
struct ath10k_ce_ring *src_ring = ce_pipe->src_ring;
|
|
unsigned int nentries_mask;
|
|
unsigned int sw_index;
|
|
unsigned int write_index;
|
|
int err, i = 0;
|
|
|
|
spin_lock_bh(&ce->ce_lock);
|
|
|
|
nentries_mask = src_ring->nentries_mask;
|
|
sw_index = src_ring->sw_index;
|
|
write_index = src_ring->write_index;
|
|
|
|
if (unlikely(CE_RING_DELTA(nentries_mask,
|
|
write_index, sw_index - 1) < n_items)) {
|
|
err = -ENOBUFS;
|
|
goto err;
|
|
}
|
|
|
|
for (i = 0; i < n_items - 1; i++) {
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI,
|
|
"pci tx item %d paddr %pad len %d n_items %d\n",
|
|
i, &items[i].paddr, items[i].len, n_items);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci tx data: ",
|
|
items[i].vaddr, items[i].len);
|
|
|
|
err = ath10k_ce_send_nolock(ce_pipe,
|
|
items[i].transfer_context,
|
|
items[i].paddr,
|
|
items[i].len,
|
|
items[i].transfer_id,
|
|
CE_SEND_FLAG_GATHER);
|
|
if (err)
|
|
goto err;
|
|
}
|
|
|
|
/* `i` is equal to `n_items -1` after for() */
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI,
|
|
"pci tx item %d paddr %pad len %d n_items %d\n",
|
|
i, &items[i].paddr, items[i].len, n_items);
|
|
ath10k_dbg_dump(ar, ATH10K_DBG_PCI_DUMP, NULL, "pci tx data: ",
|
|
items[i].vaddr, items[i].len);
|
|
|
|
err = ath10k_ce_send_nolock(ce_pipe,
|
|
items[i].transfer_context,
|
|
items[i].paddr,
|
|
items[i].len,
|
|
items[i].transfer_id,
|
|
0);
|
|
if (err)
|
|
goto err;
|
|
|
|
spin_unlock_bh(&ce->ce_lock);
|
|
return 0;
|
|
|
|
err:
|
|
for (; i > 0; i--)
|
|
__ath10k_ce_send_revert(ce_pipe);
|
|
|
|
spin_unlock_bh(&ce->ce_lock);
|
|
return err;
|
|
}
|
|
|
|
int ath10k_pci_hif_diag_read(struct ath10k *ar, u32 address, void *buf,
|
|
size_t buf_len)
|
|
{
|
|
return ath10k_pci_diag_read_mem(ar, address, buf, buf_len);
|
|
}
|
|
|
|
u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif get free queue number\n");
|
|
|
|
return ath10k_ce_num_free_src_entries(ar_pci->pipe_info[pipe].ce_hdl);
|
|
}
|
|
|
|
static void ath10k_pci_dump_registers(struct ath10k *ar,
|
|
struct ath10k_fw_crash_data *crash_data)
|
|
{
|
|
__le32 reg_dump_values[REG_DUMP_COUNT_QCA988X] = {};
|
|
int i, ret;
|
|
|
|
lockdep_assert_held(&ar->dump_mutex);
|
|
|
|
ret = ath10k_pci_diag_read_hi(ar, ®_dump_values[0],
|
|
hi_failure_state,
|
|
REG_DUMP_COUNT_QCA988X * sizeof(__le32));
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to read firmware dump area: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
BUILD_BUG_ON(REG_DUMP_COUNT_QCA988X % 4);
|
|
|
|
ath10k_err(ar, "firmware register dump:\n");
|
|
for (i = 0; i < REG_DUMP_COUNT_QCA988X; i += 4)
|
|
ath10k_err(ar, "[%02d]: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i,
|
|
__le32_to_cpu(reg_dump_values[i]),
|
|
__le32_to_cpu(reg_dump_values[i + 1]),
|
|
__le32_to_cpu(reg_dump_values[i + 2]),
|
|
__le32_to_cpu(reg_dump_values[i + 3]));
|
|
|
|
if (!crash_data)
|
|
return;
|
|
|
|
for (i = 0; i < REG_DUMP_COUNT_QCA988X; i++)
|
|
crash_data->registers[i] = reg_dump_values[i];
|
|
}
|
|
|
|
static int ath10k_pci_dump_memory_section(struct ath10k *ar,
|
|
const struct ath10k_mem_region *mem_region,
|
|
u8 *buf, size_t buf_len)
|
|
{
|
|
const struct ath10k_mem_section *cur_section, *next_section;
|
|
unsigned int count, section_size, skip_size;
|
|
int ret, i, j;
|
|
|
|
if (!mem_region || !buf)
|
|
return 0;
|
|
|
|
cur_section = &mem_region->section_table.sections[0];
|
|
|
|
if (mem_region->start > cur_section->start) {
|
|
ath10k_warn(ar, "incorrect memdump region 0x%x with section start address 0x%x.\n",
|
|
mem_region->start, cur_section->start);
|
|
return 0;
|
|
}
|
|
|
|
skip_size = cur_section->start - mem_region->start;
|
|
|
|
/* fill the gap between the first register section and register
|
|
* start address
|
|
*/
|
|
for (i = 0; i < skip_size; i++) {
|
|
*buf = ATH10K_MAGIC_NOT_COPIED;
|
|
buf++;
|
|
}
|
|
|
|
count = 0;
|
|
|
|
for (i = 0; cur_section != NULL; i++) {
|
|
section_size = cur_section->end - cur_section->start;
|
|
|
|
if (section_size <= 0) {
|
|
ath10k_warn(ar, "incorrect ramdump format with start address 0x%x and stop address 0x%x\n",
|
|
cur_section->start,
|
|
cur_section->end);
|
|
break;
|
|
}
|
|
|
|
if ((i + 1) == mem_region->section_table.size) {
|
|
/* last section */
|
|
next_section = NULL;
|
|
skip_size = 0;
|
|
} else {
|
|
next_section = cur_section + 1;
|
|
|
|
if (cur_section->end > next_section->start) {
|
|
ath10k_warn(ar, "next ramdump section 0x%x is smaller than current end address 0x%x\n",
|
|
next_section->start,
|
|
cur_section->end);
|
|
break;
|
|
}
|
|
|
|
skip_size = next_section->start - cur_section->end;
|
|
}
|
|
|
|
if (buf_len < (skip_size + section_size)) {
|
|
ath10k_warn(ar, "ramdump buffer is too small: %zu\n", buf_len);
|
|
break;
|
|
}
|
|
|
|
buf_len -= skip_size + section_size;
|
|
|
|
/* read section to dest memory */
|
|
ret = ath10k_pci_diag_read_mem(ar, cur_section->start,
|
|
buf, section_size);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to read ramdump from section 0x%x: %d\n",
|
|
cur_section->start, ret);
|
|
break;
|
|
}
|
|
|
|
buf += section_size;
|
|
count += section_size;
|
|
|
|
/* fill in the gap between this section and the next */
|
|
for (j = 0; j < skip_size; j++) {
|
|
*buf = ATH10K_MAGIC_NOT_COPIED;
|
|
buf++;
|
|
}
|
|
|
|
count += skip_size;
|
|
|
|
if (!next_section)
|
|
/* this was the last section */
|
|
break;
|
|
|
|
cur_section = next_section;
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static int ath10k_pci_set_ram_config(struct ath10k *ar, u32 config)
|
|
{
|
|
u32 val;
|
|
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
FW_RAM_CONFIG_ADDRESS, config);
|
|
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
FW_RAM_CONFIG_ADDRESS);
|
|
if (val != config) {
|
|
ath10k_warn(ar, "failed to set RAM config from 0x%x to 0x%x\n",
|
|
val, config);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Always returns the length */
|
|
static int ath10k_pci_dump_memory_sram(struct ath10k *ar,
|
|
const struct ath10k_mem_region *region,
|
|
u8 *buf)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
u32 base_addr, i;
|
|
|
|
base_addr = ioread32(ar_pci->mem + QCA99X0_PCIE_BAR0_START_REG);
|
|
base_addr += region->start;
|
|
|
|
for (i = 0; i < region->len; i += 4) {
|
|
iowrite32(base_addr + i, ar_pci->mem + QCA99X0_CPU_MEM_ADDR_REG);
|
|
*(u32 *)(buf + i) = ioread32(ar_pci->mem + QCA99X0_CPU_MEM_DATA_REG);
|
|
}
|
|
|
|
return region->len;
|
|
}
|
|
|
|
/* if an error happened returns < 0, otherwise the length */
|
|
static int ath10k_pci_dump_memory_reg(struct ath10k *ar,
|
|
const struct ath10k_mem_region *region,
|
|
u8 *buf)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
u32 i;
|
|
int ret;
|
|
|
|
mutex_lock(&ar->conf_mutex);
|
|
if (ar->state != ATH10K_STATE_ON) {
|
|
ath10k_warn(ar, "Skipping pci_dump_memory_reg invalid state\n");
|
|
ret = -EIO;
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < region->len; i += 4)
|
|
*(u32 *)(buf + i) = ioread32(ar_pci->mem + region->start + i);
|
|
|
|
ret = region->len;
|
|
done:
|
|
mutex_unlock(&ar->conf_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/* if an error happened returns < 0, otherwise the length */
|
|
static int ath10k_pci_dump_memory_generic(struct ath10k *ar,
|
|
const struct ath10k_mem_region *current_region,
|
|
u8 *buf)
|
|
{
|
|
int ret;
|
|
|
|
if (current_region->section_table.size > 0)
|
|
/* Copy each section individually. */
|
|
return ath10k_pci_dump_memory_section(ar,
|
|
current_region,
|
|
buf,
|
|
current_region->len);
|
|
|
|
/* No individiual memory sections defined so we can
|
|
* copy the entire memory region.
|
|
*/
|
|
ret = ath10k_pci_diag_read_mem(ar,
|
|
current_region->start,
|
|
buf,
|
|
current_region->len);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to copy ramdump region %s: %d\n",
|
|
current_region->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
return current_region->len;
|
|
}
|
|
|
|
static void ath10k_pci_dump_memory(struct ath10k *ar,
|
|
struct ath10k_fw_crash_data *crash_data)
|
|
{
|
|
const struct ath10k_hw_mem_layout *mem_layout;
|
|
const struct ath10k_mem_region *current_region;
|
|
struct ath10k_dump_ram_data_hdr *hdr;
|
|
u32 count, shift;
|
|
size_t buf_len;
|
|
int ret, i;
|
|
u8 *buf;
|
|
|
|
lockdep_assert_held(&ar->dump_mutex);
|
|
|
|
if (!crash_data)
|
|
return;
|
|
|
|
mem_layout = ath10k_coredump_get_mem_layout(ar);
|
|
if (!mem_layout)
|
|
return;
|
|
|
|
current_region = &mem_layout->region_table.regions[0];
|
|
|
|
buf = crash_data->ramdump_buf;
|
|
buf_len = crash_data->ramdump_buf_len;
|
|
|
|
memset(buf, 0, buf_len);
|
|
|
|
for (i = 0; i < mem_layout->region_table.size; i++) {
|
|
count = 0;
|
|
|
|
if (current_region->len > buf_len) {
|
|
ath10k_warn(ar, "memory region %s size %d is larger that remaining ramdump buffer size %zu\n",
|
|
current_region->name,
|
|
current_region->len,
|
|
buf_len);
|
|
break;
|
|
}
|
|
|
|
/* To get IRAM dump, the host driver needs to switch target
|
|
* ram config from DRAM to IRAM.
|
|
*/
|
|
if (current_region->type == ATH10K_MEM_REGION_TYPE_IRAM1 ||
|
|
current_region->type == ATH10K_MEM_REGION_TYPE_IRAM2) {
|
|
shift = current_region->start >> 20;
|
|
|
|
ret = ath10k_pci_set_ram_config(ar, shift);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to switch ram config to IRAM for section %s: %d\n",
|
|
current_region->name, ret);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Reserve space for the header. */
|
|
hdr = (void *)buf;
|
|
buf += sizeof(*hdr);
|
|
buf_len -= sizeof(*hdr);
|
|
|
|
switch (current_region->type) {
|
|
case ATH10K_MEM_REGION_TYPE_IOSRAM:
|
|
count = ath10k_pci_dump_memory_sram(ar, current_region, buf);
|
|
break;
|
|
case ATH10K_MEM_REGION_TYPE_IOREG:
|
|
ret = ath10k_pci_dump_memory_reg(ar, current_region, buf);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
count = ret;
|
|
break;
|
|
default:
|
|
ret = ath10k_pci_dump_memory_generic(ar, current_region, buf);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
count = ret;
|
|
break;
|
|
}
|
|
|
|
hdr->region_type = cpu_to_le32(current_region->type);
|
|
hdr->start = cpu_to_le32(current_region->start);
|
|
hdr->length = cpu_to_le32(count);
|
|
|
|
if (count == 0)
|
|
/* Note: the header remains, just with zero length. */
|
|
break;
|
|
|
|
buf += count;
|
|
buf_len -= count;
|
|
|
|
current_region++;
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_fw_dump_work(struct work_struct *work)
|
|
{
|
|
struct ath10k_pci *ar_pci = container_of(work, struct ath10k_pci,
|
|
dump_work);
|
|
struct ath10k_fw_crash_data *crash_data;
|
|
struct ath10k *ar = ar_pci->ar;
|
|
char guid[UUID_STRING_LEN + 1];
|
|
|
|
mutex_lock(&ar->dump_mutex);
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->stats.fw_crash_counter++;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
crash_data = ath10k_coredump_new(ar);
|
|
|
|
if (crash_data)
|
|
scnprintf(guid, sizeof(guid), "%pUl", &crash_data->guid);
|
|
else
|
|
scnprintf(guid, sizeof(guid), "n/a");
|
|
|
|
ath10k_err(ar, "firmware crashed! (guid %s)\n", guid);
|
|
ath10k_print_driver_info(ar);
|
|
ath10k_pci_dump_registers(ar, crash_data);
|
|
ath10k_ce_dump_registers(ar, crash_data);
|
|
ath10k_pci_dump_memory(ar, crash_data);
|
|
|
|
mutex_unlock(&ar->dump_mutex);
|
|
|
|
ath10k_core_start_recovery(ar);
|
|
}
|
|
|
|
static void ath10k_pci_fw_crashed_dump(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
queue_work(ar->workqueue, &ar_pci->dump_work);
|
|
}
|
|
|
|
void ath10k_pci_hif_send_complete_check(struct ath10k *ar, u8 pipe,
|
|
int force)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif send complete check\n");
|
|
|
|
if (!force) {
|
|
int resources;
|
|
/*
|
|
* Decide whether to actually poll for completions, or just
|
|
* wait for a later chance.
|
|
* If there seem to be plenty of resources left, then just wait
|
|
* since checking involves reading a CE register, which is a
|
|
* relatively expensive operation.
|
|
*/
|
|
resources = ath10k_pci_hif_get_free_queue_number(ar, pipe);
|
|
|
|
/*
|
|
* If at least 50% of the total resources are still available,
|
|
* don't bother checking again yet.
|
|
*/
|
|
if (resources > (ar_pci->attr[pipe].src_nentries >> 1))
|
|
return;
|
|
}
|
|
ath10k_ce_per_engine_service(ar, pipe);
|
|
}
|
|
|
|
static void ath10k_pci_rx_retry_sync(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
del_timer_sync(&ar_pci->rx_post_retry);
|
|
}
|
|
|
|
int ath10k_pci_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id,
|
|
u8 *ul_pipe, u8 *dl_pipe)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
const struct ce_service_to_pipe *entry;
|
|
bool ul_set = false, dl_set = false;
|
|
int i;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif map service\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pci_target_service_to_ce_map_wlan); i++) {
|
|
entry = &ar_pci->serv_to_pipe[i];
|
|
|
|
if (__le32_to_cpu(entry->service_id) != service_id)
|
|
continue;
|
|
|
|
switch (__le32_to_cpu(entry->pipedir)) {
|
|
case PIPEDIR_NONE:
|
|
break;
|
|
case PIPEDIR_IN:
|
|
WARN_ON(dl_set);
|
|
*dl_pipe = __le32_to_cpu(entry->pipenum);
|
|
dl_set = true;
|
|
break;
|
|
case PIPEDIR_OUT:
|
|
WARN_ON(ul_set);
|
|
*ul_pipe = __le32_to_cpu(entry->pipenum);
|
|
ul_set = true;
|
|
break;
|
|
case PIPEDIR_INOUT:
|
|
WARN_ON(dl_set);
|
|
WARN_ON(ul_set);
|
|
*dl_pipe = __le32_to_cpu(entry->pipenum);
|
|
*ul_pipe = __le32_to_cpu(entry->pipenum);
|
|
dl_set = true;
|
|
ul_set = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!ul_set || !dl_set)
|
|
return -ENOENT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ath10k_pci_hif_get_default_pipe(struct ath10k *ar,
|
|
u8 *ul_pipe, u8 *dl_pipe)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci hif get default pipe\n");
|
|
|
|
(void)ath10k_pci_hif_map_service_to_pipe(ar,
|
|
ATH10K_HTC_SVC_ID_RSVD_CTRL,
|
|
ul_pipe, dl_pipe);
|
|
}
|
|
|
|
void ath10k_pci_irq_msi_fw_mask(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
switch (ar->hw_rev) {
|
|
case ATH10K_HW_QCA988X:
|
|
case ATH10K_HW_QCA9887:
|
|
case ATH10K_HW_QCA6174:
|
|
case ATH10K_HW_QCA9377:
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CORE_CTRL_ADDRESS);
|
|
val &= ~CORE_CTRL_PCIE_REG_31_MASK;
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CORE_CTRL_ADDRESS, val);
|
|
break;
|
|
case ATH10K_HW_QCA99X0:
|
|
case ATH10K_HW_QCA9984:
|
|
case ATH10K_HW_QCA9888:
|
|
case ATH10K_HW_QCA4019:
|
|
/* TODO: Find appropriate register configuration for QCA99X0
|
|
* to mask irq/MSI.
|
|
*/
|
|
break;
|
|
case ATH10K_HW_WCN3990:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_irq_msi_fw_unmask(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
switch (ar->hw_rev) {
|
|
case ATH10K_HW_QCA988X:
|
|
case ATH10K_HW_QCA9887:
|
|
case ATH10K_HW_QCA6174:
|
|
case ATH10K_HW_QCA9377:
|
|
val = ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CORE_CTRL_ADDRESS);
|
|
val |= CORE_CTRL_PCIE_REG_31_MASK;
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS +
|
|
CORE_CTRL_ADDRESS, val);
|
|
break;
|
|
case ATH10K_HW_QCA99X0:
|
|
case ATH10K_HW_QCA9984:
|
|
case ATH10K_HW_QCA9888:
|
|
case ATH10K_HW_QCA4019:
|
|
/* TODO: Find appropriate register configuration for QCA99X0
|
|
* to unmask irq/MSI.
|
|
*/
|
|
break;
|
|
case ATH10K_HW_WCN3990:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_irq_disable(struct ath10k *ar)
|
|
{
|
|
ath10k_ce_disable_interrupts(ar);
|
|
ath10k_pci_disable_and_clear_legacy_irq(ar);
|
|
ath10k_pci_irq_msi_fw_mask(ar);
|
|
}
|
|
|
|
static void ath10k_pci_irq_sync(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
synchronize_irq(ar_pci->pdev->irq);
|
|
}
|
|
|
|
static void ath10k_pci_irq_enable(struct ath10k *ar)
|
|
{
|
|
ath10k_ce_enable_interrupts(ar);
|
|
ath10k_pci_enable_legacy_irq(ar);
|
|
ath10k_pci_irq_msi_fw_unmask(ar);
|
|
}
|
|
|
|
static int ath10k_pci_hif_start(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif start\n");
|
|
|
|
ath10k_core_napi_enable(ar);
|
|
|
|
ath10k_pci_irq_enable(ar);
|
|
ath10k_pci_rx_post(ar);
|
|
|
|
pcie_capability_clear_and_set_word(ar_pci->pdev, PCI_EXP_LNKCTL,
|
|
PCI_EXP_LNKCTL_ASPMC,
|
|
ar_pci->link_ctl & PCI_EXP_LNKCTL_ASPMC);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_ce_pipe *ce_pipe;
|
|
struct ath10k_ce_ring *ce_ring;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
ar = pci_pipe->hif_ce_state;
|
|
ce_pipe = pci_pipe->ce_hdl;
|
|
ce_ring = ce_pipe->dest_ring;
|
|
|
|
if (!ce_ring)
|
|
return;
|
|
|
|
if (!pci_pipe->buf_sz)
|
|
return;
|
|
|
|
for (i = 0; i < ce_ring->nentries; i++) {
|
|
skb = ce_ring->per_transfer_context[i];
|
|
if (!skb)
|
|
continue;
|
|
|
|
ce_ring->per_transfer_context[i] = NULL;
|
|
|
|
dma_unmap_single(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
|
|
skb->len + skb_tailroom(skb),
|
|
DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
|
|
{
|
|
struct ath10k *ar;
|
|
struct ath10k_ce_pipe *ce_pipe;
|
|
struct ath10k_ce_ring *ce_ring;
|
|
struct sk_buff *skb;
|
|
int i;
|
|
|
|
ar = pci_pipe->hif_ce_state;
|
|
ce_pipe = pci_pipe->ce_hdl;
|
|
ce_ring = ce_pipe->src_ring;
|
|
|
|
if (!ce_ring)
|
|
return;
|
|
|
|
if (!pci_pipe->buf_sz)
|
|
return;
|
|
|
|
for (i = 0; i < ce_ring->nentries; i++) {
|
|
skb = ce_ring->per_transfer_context[i];
|
|
if (!skb)
|
|
continue;
|
|
|
|
ce_ring->per_transfer_context[i] = NULL;
|
|
|
|
ath10k_htc_tx_completion_handler(ar, skb);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Cleanup residual buffers for device shutdown:
|
|
* buffers that were enqueued for receive
|
|
* buffers that were to be sent
|
|
* Note: Buffers that had completed but which were
|
|
* not yet processed are on a completion queue. They
|
|
* are handled when the completion thread shuts down.
|
|
*/
|
|
static void ath10k_pci_buffer_cleanup(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int pipe_num;
|
|
|
|
for (pipe_num = 0; pipe_num < CE_COUNT; pipe_num++) {
|
|
struct ath10k_pci_pipe *pipe_info;
|
|
|
|
pipe_info = &ar_pci->pipe_info[pipe_num];
|
|
ath10k_pci_rx_pipe_cleanup(pipe_info);
|
|
ath10k_pci_tx_pipe_cleanup(pipe_info);
|
|
}
|
|
}
|
|
|
|
void ath10k_pci_ce_deinit(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
ath10k_ce_deinit_pipe(ar, i);
|
|
}
|
|
|
|
void ath10k_pci_flush(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_rx_retry_sync(ar);
|
|
ath10k_pci_buffer_cleanup(ar);
|
|
}
|
|
|
|
static void ath10k_pci_hif_stop(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long flags;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
|
|
|
|
ath10k_pci_irq_disable(ar);
|
|
ath10k_pci_irq_sync(ar);
|
|
|
|
ath10k_core_napi_sync_disable(ar);
|
|
|
|
cancel_work_sync(&ar_pci->dump_work);
|
|
|
|
/* Most likely the device has HTT Rx ring configured. The only way to
|
|
* prevent the device from accessing (and possible corrupting) host
|
|
* memory is to reset the chip now.
|
|
*
|
|
* There's also no known way of masking MSI interrupts on the device.
|
|
* For ranged MSI the CE-related interrupts can be masked. However
|
|
* regardless how many MSI interrupts are assigned the first one
|
|
* is always used for firmware indications (crashes) and cannot be
|
|
* masked. To prevent the device from asserting the interrupt reset it
|
|
* before proceeding with cleanup.
|
|
*/
|
|
ath10k_pci_safe_chip_reset(ar);
|
|
|
|
ath10k_pci_flush(ar);
|
|
|
|
spin_lock_irqsave(&ar_pci->ps_lock, flags);
|
|
WARN_ON(ar_pci->ps_wake_refcount > 0);
|
|
spin_unlock_irqrestore(&ar_pci->ps_lock, flags);
|
|
}
|
|
|
|
int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar,
|
|
void *req, u32 req_len,
|
|
void *resp, u32 *resp_len)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pci_tx = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG];
|
|
struct ath10k_pci_pipe *pci_rx = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST];
|
|
struct ath10k_ce_pipe *ce_tx = pci_tx->ce_hdl;
|
|
struct ath10k_ce_pipe *ce_rx = pci_rx->ce_hdl;
|
|
dma_addr_t req_paddr = 0;
|
|
dma_addr_t resp_paddr = 0;
|
|
struct bmi_xfer xfer = {};
|
|
void *treq, *tresp = NULL;
|
|
int ret = 0;
|
|
|
|
might_sleep();
|
|
|
|
if (resp && !resp_len)
|
|
return -EINVAL;
|
|
|
|
if (resp && resp_len && *resp_len == 0)
|
|
return -EINVAL;
|
|
|
|
treq = kmemdup(req, req_len, GFP_KERNEL);
|
|
if (!treq)
|
|
return -ENOMEM;
|
|
|
|
req_paddr = dma_map_single(ar->dev, treq, req_len, DMA_TO_DEVICE);
|
|
ret = dma_mapping_error(ar->dev, req_paddr);
|
|
if (ret) {
|
|
ret = -EIO;
|
|
goto err_dma;
|
|
}
|
|
|
|
if (resp && resp_len) {
|
|
tresp = kzalloc(*resp_len, GFP_KERNEL);
|
|
if (!tresp) {
|
|
ret = -ENOMEM;
|
|
goto err_req;
|
|
}
|
|
|
|
resp_paddr = dma_map_single(ar->dev, tresp, *resp_len,
|
|
DMA_FROM_DEVICE);
|
|
ret = dma_mapping_error(ar->dev, resp_paddr);
|
|
if (ret) {
|
|
ret = -EIO;
|
|
goto err_req;
|
|
}
|
|
|
|
xfer.wait_for_resp = true;
|
|
xfer.resp_len = 0;
|
|
|
|
ath10k_ce_rx_post_buf(ce_rx, &xfer, resp_paddr);
|
|
}
|
|
|
|
ret = ath10k_ce_send(ce_tx, &xfer, req_paddr, req_len, -1, 0);
|
|
if (ret)
|
|
goto err_resp;
|
|
|
|
ret = ath10k_pci_bmi_wait(ar, ce_tx, ce_rx, &xfer);
|
|
if (ret) {
|
|
dma_addr_t unused_buffer;
|
|
unsigned int unused_nbytes;
|
|
unsigned int unused_id;
|
|
|
|
ath10k_ce_cancel_send_next(ce_tx, NULL, &unused_buffer,
|
|
&unused_nbytes, &unused_id);
|
|
} else {
|
|
/* non-zero means we did not time out */
|
|
ret = 0;
|
|
}
|
|
|
|
err_resp:
|
|
if (resp) {
|
|
dma_addr_t unused_buffer;
|
|
|
|
ath10k_ce_revoke_recv_next(ce_rx, NULL, &unused_buffer);
|
|
dma_unmap_single(ar->dev, resp_paddr,
|
|
*resp_len, DMA_FROM_DEVICE);
|
|
}
|
|
err_req:
|
|
dma_unmap_single(ar->dev, req_paddr, req_len, DMA_TO_DEVICE);
|
|
|
|
if (ret == 0 && resp_len) {
|
|
*resp_len = min(*resp_len, xfer.resp_len);
|
|
memcpy(resp, tresp, *resp_len);
|
|
}
|
|
err_dma:
|
|
kfree(treq);
|
|
kfree(tresp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct bmi_xfer *xfer;
|
|
|
|
if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer))
|
|
return;
|
|
|
|
xfer->tx_done = true;
|
|
}
|
|
|
|
static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state)
|
|
{
|
|
struct ath10k *ar = ce_state->ar;
|
|
struct bmi_xfer *xfer;
|
|
unsigned int nbytes;
|
|
|
|
if (ath10k_ce_completed_recv_next(ce_state, (void **)&xfer,
|
|
&nbytes))
|
|
return;
|
|
|
|
if (WARN_ON_ONCE(!xfer))
|
|
return;
|
|
|
|
if (!xfer->wait_for_resp) {
|
|
ath10k_warn(ar, "unexpected: BMI data received; ignoring\n");
|
|
return;
|
|
}
|
|
|
|
xfer->resp_len = nbytes;
|
|
xfer->rx_done = true;
|
|
}
|
|
|
|
static int ath10k_pci_bmi_wait(struct ath10k *ar,
|
|
struct ath10k_ce_pipe *tx_pipe,
|
|
struct ath10k_ce_pipe *rx_pipe,
|
|
struct bmi_xfer *xfer)
|
|
{
|
|
unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ;
|
|
unsigned long started = jiffies;
|
|
unsigned long dur;
|
|
int ret;
|
|
|
|
while (time_before_eq(jiffies, timeout)) {
|
|
ath10k_pci_bmi_send_done(tx_pipe);
|
|
ath10k_pci_bmi_recv_data(rx_pipe);
|
|
|
|
if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp)) {
|
|
ret = 0;
|
|
goto out;
|
|
}
|
|
|
|
schedule();
|
|
}
|
|
|
|
ret = -ETIMEDOUT;
|
|
|
|
out:
|
|
dur = jiffies - started;
|
|
if (dur > HZ)
|
|
ath10k_dbg(ar, ATH10K_DBG_BMI,
|
|
"bmi cmd took %lu jiffies hz %d ret %d\n",
|
|
dur, HZ, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Send an interrupt to the device to wake up the Target CPU
|
|
* so it has an opportunity to notice any changed state.
|
|
*/
|
|
static int ath10k_pci_wake_target_cpu(struct ath10k *ar)
|
|
{
|
|
u32 addr, val;
|
|
|
|
addr = SOC_CORE_BASE_ADDRESS + CORE_CTRL_ADDRESS;
|
|
val = ath10k_pci_read32(ar, addr);
|
|
val |= CORE_CTRL_CPU_INTR_MASK;
|
|
ath10k_pci_write32(ar, addr, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_get_num_banks(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
switch (ar_pci->pdev->device) {
|
|
case QCA988X_2_0_DEVICE_ID_UBNT:
|
|
case QCA988X_2_0_DEVICE_ID:
|
|
case QCA99X0_2_0_DEVICE_ID:
|
|
case QCA9888_2_0_DEVICE_ID:
|
|
case QCA9984_1_0_DEVICE_ID:
|
|
case QCA9887_1_0_DEVICE_ID:
|
|
return 1;
|
|
case QCA6164_2_1_DEVICE_ID:
|
|
case QCA6174_2_1_DEVICE_ID:
|
|
switch (MS(ar->bus_param.chip_id, SOC_CHIP_ID_REV)) {
|
|
case QCA6174_HW_1_0_CHIP_ID_REV:
|
|
case QCA6174_HW_1_1_CHIP_ID_REV:
|
|
case QCA6174_HW_2_1_CHIP_ID_REV:
|
|
case QCA6174_HW_2_2_CHIP_ID_REV:
|
|
return 3;
|
|
case QCA6174_HW_1_3_CHIP_ID_REV:
|
|
return 2;
|
|
case QCA6174_HW_3_0_CHIP_ID_REV:
|
|
case QCA6174_HW_3_1_CHIP_ID_REV:
|
|
case QCA6174_HW_3_2_CHIP_ID_REV:
|
|
return 9;
|
|
}
|
|
break;
|
|
case QCA9377_1_0_DEVICE_ID:
|
|
return 9;
|
|
}
|
|
|
|
ath10k_warn(ar, "unknown number of banks, assuming 1\n");
|
|
return 1;
|
|
}
|
|
|
|
static int ath10k_bus_get_num_banks(struct ath10k *ar)
|
|
{
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
|
|
return ce->bus_ops->get_num_banks(ar);
|
|
}
|
|
|
|
int ath10k_pci_init_config(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
u32 interconnect_targ_addr;
|
|
u32 pcie_state_targ_addr = 0;
|
|
u32 pipe_cfg_targ_addr = 0;
|
|
u32 svc_to_pipe_map = 0;
|
|
u32 pcie_config_flags = 0;
|
|
u32 ealloc_value;
|
|
u32 ealloc_targ_addr;
|
|
u32 flag2_value;
|
|
u32 flag2_targ_addr;
|
|
int ret = 0;
|
|
|
|
/* Download to Target the CE Config and the service-to-CE map */
|
|
interconnect_targ_addr =
|
|
host_interest_item_address(HI_ITEM(hi_interconnect_state));
|
|
|
|
/* Supply Target-side CE configuration */
|
|
ret = ath10k_pci_diag_read32(ar, interconnect_targ_addr,
|
|
&pcie_state_targ_addr);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pcie state addr: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pcie_state_targ_addr == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid pcie state addr\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
pipe_cfg_addr)),
|
|
&pipe_cfg_targ_addr);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pipe cfg addr: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pipe_cfg_targ_addr == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid pipe cfg addr\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_write_mem(ar, pipe_cfg_targ_addr,
|
|
ar_pci->pipe_config,
|
|
sizeof(struct ce_pipe_config) *
|
|
NUM_TARGET_CE_CONFIG_WLAN);
|
|
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write pipe cfg: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
svc_to_pipe_map)),
|
|
&svc_to_pipe_map);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get svc/pipe map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (svc_to_pipe_map == 0) {
|
|
ret = -EIO;
|
|
ath10k_err(ar, "Invalid svc_to_pipe map\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_write_mem(ar, svc_to_pipe_map,
|
|
ar_pci->serv_to_pipe,
|
|
sizeof(pci_target_service_to_ce_map_wlan));
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write svc/pipe map: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
config_flags)),
|
|
&pcie_config_flags);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get pcie config_flags: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pcie_config_flags &= ~PCIE_CONFIG_FLAG_ENABLE_L1;
|
|
|
|
ret = ath10k_pci_diag_write32(ar, (pcie_state_targ_addr +
|
|
offsetof(struct pcie_state,
|
|
config_flags)),
|
|
pcie_config_flags);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to write pcie config_flags: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* configure early allocation */
|
|
ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc));
|
|
|
|
ret = ath10k_pci_diag_read32(ar, ealloc_targ_addr, &ealloc_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get early alloc val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* first bank is switched to IRAM */
|
|
ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
|
|
HI_EARLY_ALLOC_MAGIC_MASK);
|
|
ealloc_value |= ((ath10k_bus_get_num_banks(ar) <<
|
|
HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
|
|
HI_EARLY_ALLOC_IRAM_BANKS_MASK);
|
|
|
|
ret = ath10k_pci_diag_write32(ar, ealloc_targ_addr, ealloc_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to set early alloc val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Tell Target to proceed with initialization */
|
|
flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2));
|
|
|
|
ret = ath10k_pci_diag_read32(ar, flag2_targ_addr, &flag2_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to get option val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
flag2_value |= HI_OPTION_EARLY_CFG_DONE;
|
|
|
|
ret = ath10k_pci_diag_write32(ar, flag2_targ_addr, flag2_value);
|
|
if (ret != 0) {
|
|
ath10k_err(ar, "Failed to set option val: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_override_ce_config(struct ath10k *ar)
|
|
{
|
|
struct ce_attr *attr;
|
|
struct ce_pipe_config *config;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
/* For QCA6174 we're overriding the Copy Engine 5 configuration,
|
|
* since it is currently used for other feature.
|
|
*/
|
|
|
|
/* Override Host's Copy Engine 5 configuration */
|
|
attr = &ar_pci->attr[5];
|
|
attr->src_sz_max = 0;
|
|
attr->dest_nentries = 0;
|
|
|
|
/* Override Target firmware's Copy Engine configuration */
|
|
config = &ar_pci->pipe_config[5];
|
|
config->pipedir = __cpu_to_le32(PIPEDIR_OUT);
|
|
config->nbytes_max = __cpu_to_le32(2048);
|
|
|
|
/* Map from service/endpoint to Copy Engine */
|
|
ar_pci->serv_to_pipe[15].pipenum = __cpu_to_le32(1);
|
|
}
|
|
|
|
int ath10k_pci_alloc_pipes(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_pci_pipe *pipe;
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CE_COUNT; i++) {
|
|
pipe = &ar_pci->pipe_info[i];
|
|
pipe->ce_hdl = &ce->ce_states[i];
|
|
pipe->pipe_num = i;
|
|
pipe->hif_ce_state = ar;
|
|
|
|
ret = ath10k_ce_alloc_pipe(ar, i, &ar_pci->attr[i]);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to allocate copy engine pipe %d: %d\n",
|
|
i, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Last CE is Diagnostic Window */
|
|
if (i == CE_DIAG_PIPE) {
|
|
ar_pci->ce_diag = pipe->ce_hdl;
|
|
continue;
|
|
}
|
|
|
|
pipe->buf_sz = (size_t)(ar_pci->attr[i].src_sz_max);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ath10k_pci_free_pipes(struct ath10k *ar)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CE_COUNT; i++)
|
|
ath10k_ce_free_pipe(ar, i);
|
|
}
|
|
|
|
int ath10k_pci_init_pipes(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int i, ret;
|
|
|
|
for (i = 0; i < CE_COUNT; i++) {
|
|
ret = ath10k_ce_init_pipe(ar, i, &ar_pci->attr[i]);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to initialize copy engine pipe %d: %d\n",
|
|
i, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool ath10k_pci_has_fw_crashed(struct ath10k *ar)
|
|
{
|
|
return ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS) &
|
|
FW_IND_EVENT_PENDING;
|
|
}
|
|
|
|
static void ath10k_pci_fw_crashed_clear(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
|
|
val &= ~FW_IND_EVENT_PENDING;
|
|
ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, val);
|
|
}
|
|
|
|
static bool ath10k_pci_has_device_gone(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
|
|
return (val == 0xffffffff);
|
|
}
|
|
|
|
/* this function effectively clears target memory controller assert line */
|
|
static void ath10k_pci_warm_reset_si0(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_SI0_RST_MASK);
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
|
|
msleep(10);
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val & ~SOC_RESET_CONTROL_SI0_RST_MASK);
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
static void ath10k_pci_warm_reset_cpu(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
ath10k_pci_write32(ar, FW_INDICATOR_ADDRESS, 0);
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_CPU_WARM_RST_MASK);
|
|
}
|
|
|
|
static void ath10k_pci_warm_reset_ce(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_RESET_CONTROL_ADDRESS);
|
|
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val | SOC_RESET_CONTROL_CE_RST_MASK);
|
|
msleep(10);
|
|
ath10k_pci_soc_write32(ar, SOC_RESET_CONTROL_ADDRESS,
|
|
val & ~SOC_RESET_CONTROL_CE_RST_MASK);
|
|
}
|
|
|
|
static void ath10k_pci_warm_reset_clear_lf(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
val = ath10k_pci_soc_read32(ar, SOC_LF_TIMER_CONTROL0_ADDRESS);
|
|
ath10k_pci_soc_write32(ar, SOC_LF_TIMER_CONTROL0_ADDRESS,
|
|
val & ~SOC_LF_TIMER_CONTROL0_ENABLE_MASK);
|
|
}
|
|
|
|
static int ath10k_pci_warm_reset(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset\n");
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
ar->stats.fw_warm_reset_counter++;
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
ath10k_pci_irq_disable(ar);
|
|
|
|
/* Make sure the target CPU is not doing anything dangerous, e.g. if it
|
|
* were to access copy engine while host performs copy engine reset
|
|
* then it is possible for the device to confuse pci-e controller to
|
|
* the point of bringing host system to a complete stop (i.e. hang).
|
|
*/
|
|
ath10k_pci_warm_reset_si0(ar);
|
|
ath10k_pci_warm_reset_cpu(ar);
|
|
ath10k_pci_init_pipes(ar);
|
|
ath10k_pci_wait_for_target_init(ar);
|
|
|
|
ath10k_pci_warm_reset_clear_lf(ar);
|
|
ath10k_pci_warm_reset_ce(ar);
|
|
ath10k_pci_warm_reset_cpu(ar);
|
|
ath10k_pci_init_pipes(ar);
|
|
|
|
ret = ath10k_pci_wait_for_target_init(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wait for target init: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot warm reset complete\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_qca99x0_soft_chip_reset(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_irq_disable(ar);
|
|
return ath10k_pci_qca99x0_chip_reset(ar);
|
|
}
|
|
|
|
static int ath10k_pci_safe_chip_reset(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (!ar_pci->pci_soft_reset)
|
|
return -ENOTSUPP;
|
|
|
|
return ar_pci->pci_soft_reset(ar);
|
|
}
|
|
|
|
static int ath10k_pci_qca988x_chip_reset(struct ath10k *ar)
|
|
{
|
|
int i, ret;
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot 988x chip reset\n");
|
|
|
|
/* Some hardware revisions (e.g. CUS223v2) has issues with cold reset.
|
|
* It is thus preferred to use warm reset which is safer but may not be
|
|
* able to recover the device from all possible fail scenarios.
|
|
*
|
|
* Warm reset doesn't always work on first try so attempt it a few
|
|
* times before giving up.
|
|
*/
|
|
for (i = 0; i < ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS; i++) {
|
|
ret = ath10k_pci_warm_reset(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to warm reset attempt %d of %d: %d\n",
|
|
i + 1, ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS,
|
|
ret);
|
|
continue;
|
|
}
|
|
|
|
/* FIXME: Sometimes copy engine doesn't recover after warm
|
|
* reset. In most cases this needs cold reset. In some of these
|
|
* cases the device is in such a state that a cold reset may
|
|
* lock up the host.
|
|
*
|
|
* Reading any host interest register via copy engine is
|
|
* sufficient to verify if device is capable of booting
|
|
* firmware blob.
|
|
*/
|
|
ret = ath10k_pci_init_pipes(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to init copy engine: %d\n",
|
|
ret);
|
|
continue;
|
|
}
|
|
|
|
ret = ath10k_pci_diag_read32(ar, QCA988X_HOST_INTEREST_ADDRESS,
|
|
&val);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to poke copy engine: %d\n",
|
|
ret);
|
|
continue;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset complete (warm)\n");
|
|
return 0;
|
|
}
|
|
|
|
if (ath10k_pci_reset_mode == ATH10K_PCI_RESET_WARM_ONLY) {
|
|
ath10k_warn(ar, "refusing cold reset as requested\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
ret = ath10k_pci_cold_reset(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to cold reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_wait_for_target_init(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca988x chip reset complete (cold)\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_qca6174_chip_reset(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset\n");
|
|
|
|
/* FIXME: QCA6174 requires cold + warm reset to work. */
|
|
|
|
ret = ath10k_pci_cold_reset(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to cold reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_wait_for_target_init(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_warm_reset(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to warm reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset complete (cold)\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_qca99x0_chip_reset(struct ath10k *ar)
|
|
{
|
|
int ret;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca99x0 chip reset\n");
|
|
|
|
ret = ath10k_pci_cold_reset(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to cold reset: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = ath10k_pci_wait_for_target_init(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca99x0 chip reset complete (cold)\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_chip_reset(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
if (WARN_ON(!ar_pci->pci_hard_reset))
|
|
return -ENOTSUPP;
|
|
|
|
return ar_pci->pci_hard_reset(ar);
|
|
}
|
|
|
|
static int ath10k_pci_hif_power_up(struct ath10k *ar,
|
|
enum ath10k_firmware_mode fw_mode)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power up\n");
|
|
|
|
pcie_capability_read_word(ar_pci->pdev, PCI_EXP_LNKCTL,
|
|
&ar_pci->link_ctl);
|
|
pcie_capability_clear_word(ar_pci->pdev, PCI_EXP_LNKCTL,
|
|
PCI_EXP_LNKCTL_ASPMC);
|
|
|
|
/*
|
|
* Bring the target up cleanly.
|
|
*
|
|
* The target may be in an undefined state with an AUX-powered Target
|
|
* and a Host in WoW mode. If the Host crashes, loses power, or is
|
|
* restarted (without unloading the driver) then the Target is left
|
|
* (aux) powered and running. On a subsequent driver load, the Target
|
|
* is in an unexpected state. We try to catch that here in order to
|
|
* reset the Target and retry the probe.
|
|
*/
|
|
ret = ath10k_pci_chip_reset(ar);
|
|
if (ret) {
|
|
if (ath10k_pci_has_fw_crashed(ar)) {
|
|
ath10k_warn(ar, "firmware crashed during chip reset\n");
|
|
ath10k_pci_fw_crashed_clear(ar);
|
|
ath10k_pci_fw_crashed_dump(ar);
|
|
}
|
|
|
|
ath10k_err(ar, "failed to reset chip: %d\n", ret);
|
|
goto err_sleep;
|
|
}
|
|
|
|
ret = ath10k_pci_init_pipes(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to initialize CE: %d\n", ret);
|
|
goto err_sleep;
|
|
}
|
|
|
|
ret = ath10k_pci_init_config(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to setup init config: %d\n", ret);
|
|
goto err_ce;
|
|
}
|
|
|
|
ret = ath10k_pci_wake_target_cpu(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "could not wake up target CPU: %d\n", ret);
|
|
goto err_ce;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_ce:
|
|
ath10k_pci_ce_deinit(ar);
|
|
|
|
err_sleep:
|
|
return ret;
|
|
}
|
|
|
|
void ath10k_pci_hif_power_down(struct ath10k *ar)
|
|
{
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif power down\n");
|
|
|
|
/* Currently hif_power_up performs effectively a reset and hif_stop
|
|
* resets the chip as well so there's no point in resetting here.
|
|
*/
|
|
}
|
|
|
|
static int ath10k_pci_hif_suspend(struct ath10k *ar)
|
|
{
|
|
/* Nothing to do; the important stuff is in the driver suspend. */
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_suspend(struct ath10k *ar)
|
|
{
|
|
/* The grace timer can still be counting down and ar->ps_awake be true.
|
|
* It is known that the device may be asleep after resuming regardless
|
|
* of the SoC powersave state before suspending. Hence make sure the
|
|
* device is asleep before proceeding.
|
|
*/
|
|
ath10k_pci_sleep_sync(ar);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_hif_resume(struct ath10k *ar)
|
|
{
|
|
/* Nothing to do; the important stuff is in the driver resume. */
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_resume(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = ath10k_pci_force_wake(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to wake up target: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Suspend/Resume resets the PCI configuration space, so we have to
|
|
* re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
|
|
* from interfering with C3 CPU state. pci_restore_state won't help
|
|
* here since it only restores the first 64 bytes pci config header.
|
|
*/
|
|
pci_read_config_dword(pdev, 0x40, &val);
|
|
if ((val & 0x0000ff00) != 0)
|
|
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool ath10k_pci_validate_cal(void *data, size_t size)
|
|
{
|
|
__le16 *cal_words = data;
|
|
u16 checksum = 0;
|
|
size_t i;
|
|
|
|
if (size % 2 != 0)
|
|
return false;
|
|
|
|
for (i = 0; i < size / 2; i++)
|
|
checksum ^= le16_to_cpu(cal_words[i]);
|
|
|
|
return checksum == 0xffff;
|
|
}
|
|
|
|
static void ath10k_pci_enable_eeprom(struct ath10k *ar)
|
|
{
|
|
/* Enable SI clock */
|
|
ath10k_pci_soc_write32(ar, CLOCK_CONTROL_OFFSET, 0x0);
|
|
|
|
/* Configure GPIOs for I2C operation */
|
|
ath10k_pci_write32(ar,
|
|
GPIO_BASE_ADDRESS + GPIO_PIN0_OFFSET +
|
|
4 * QCA9887_1_0_I2C_SDA_GPIO_PIN,
|
|
SM(QCA9887_1_0_I2C_SDA_PIN_CONFIG,
|
|
GPIO_PIN0_CONFIG) |
|
|
SM(1, GPIO_PIN0_PAD_PULL));
|
|
|
|
ath10k_pci_write32(ar,
|
|
GPIO_BASE_ADDRESS + GPIO_PIN0_OFFSET +
|
|
4 * QCA9887_1_0_SI_CLK_GPIO_PIN,
|
|
SM(QCA9887_1_0_SI_CLK_PIN_CONFIG, GPIO_PIN0_CONFIG) |
|
|
SM(1, GPIO_PIN0_PAD_PULL));
|
|
|
|
ath10k_pci_write32(ar,
|
|
GPIO_BASE_ADDRESS +
|
|
QCA9887_1_0_GPIO_ENABLE_W1TS_LOW_ADDRESS,
|
|
1u << QCA9887_1_0_SI_CLK_GPIO_PIN);
|
|
|
|
/* In Swift ASIC - EEPROM clock will be (110MHz/512) = 214KHz */
|
|
ath10k_pci_write32(ar,
|
|
SI_BASE_ADDRESS + SI_CONFIG_OFFSET,
|
|
SM(1, SI_CONFIG_ERR_INT) |
|
|
SM(1, SI_CONFIG_BIDIR_OD_DATA) |
|
|
SM(1, SI_CONFIG_I2C) |
|
|
SM(1, SI_CONFIG_POS_SAMPLE) |
|
|
SM(1, SI_CONFIG_INACTIVE_DATA) |
|
|
SM(1, SI_CONFIG_INACTIVE_CLK) |
|
|
SM(8, SI_CONFIG_DIVIDER));
|
|
}
|
|
|
|
static int ath10k_pci_read_eeprom(struct ath10k *ar, u16 addr, u8 *out)
|
|
{
|
|
u32 reg;
|
|
int wait_limit;
|
|
|
|
/* set device select byte and for the read operation */
|
|
reg = QCA9887_EEPROM_SELECT_READ |
|
|
SM(addr, QCA9887_EEPROM_ADDR_LO) |
|
|
SM(addr >> 8, QCA9887_EEPROM_ADDR_HI);
|
|
ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_TX_DATA0_OFFSET, reg);
|
|
|
|
/* write transmit data, transfer length, and START bit */
|
|
ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET,
|
|
SM(1, SI_CS_START) | SM(1, SI_CS_RX_CNT) |
|
|
SM(4, SI_CS_TX_CNT));
|
|
|
|
/* wait max 1 sec */
|
|
wait_limit = 100000;
|
|
|
|
/* wait for SI_CS_DONE_INT */
|
|
do {
|
|
reg = ath10k_pci_read32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET);
|
|
if (MS(reg, SI_CS_DONE_INT))
|
|
break;
|
|
|
|
wait_limit--;
|
|
udelay(10);
|
|
} while (wait_limit > 0);
|
|
|
|
if (!MS(reg, SI_CS_DONE_INT)) {
|
|
ath10k_err(ar, "timeout while reading device EEPROM at %04x\n",
|
|
addr);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* clear SI_CS_DONE_INT */
|
|
ath10k_pci_write32(ar, SI_BASE_ADDRESS + SI_CS_OFFSET, reg);
|
|
|
|
if (MS(reg, SI_CS_DONE_ERR)) {
|
|
ath10k_err(ar, "failed to read device EEPROM at %04x\n", addr);
|
|
return -EIO;
|
|
}
|
|
|
|
/* extract receive data */
|
|
reg = ath10k_pci_read32(ar, SI_BASE_ADDRESS + SI_RX_DATA0_OFFSET);
|
|
*out = reg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_hif_fetch_cal_eeprom(struct ath10k *ar, void **data,
|
|
size_t *data_len)
|
|
{
|
|
u8 *caldata = NULL;
|
|
size_t calsize, i;
|
|
int ret;
|
|
|
|
if (!QCA_REV_9887(ar))
|
|
return -EOPNOTSUPP;
|
|
|
|
calsize = ar->hw_params.cal_data_len;
|
|
caldata = kmalloc(calsize, GFP_KERNEL);
|
|
if (!caldata)
|
|
return -ENOMEM;
|
|
|
|
ath10k_pci_enable_eeprom(ar);
|
|
|
|
for (i = 0; i < calsize; i++) {
|
|
ret = ath10k_pci_read_eeprom(ar, i, &caldata[i]);
|
|
if (ret)
|
|
goto err_free;
|
|
}
|
|
|
|
if (!ath10k_pci_validate_cal(caldata, calsize))
|
|
goto err_free;
|
|
|
|
*data = caldata;
|
|
*data_len = calsize;
|
|
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(caldata);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct ath10k_hif_ops ath10k_pci_hif_ops = {
|
|
.tx_sg = ath10k_pci_hif_tx_sg,
|
|
.diag_read = ath10k_pci_hif_diag_read,
|
|
.diag_write = ath10k_pci_diag_write_mem,
|
|
.exchange_bmi_msg = ath10k_pci_hif_exchange_bmi_msg,
|
|
.start = ath10k_pci_hif_start,
|
|
.stop = ath10k_pci_hif_stop,
|
|
.map_service_to_pipe = ath10k_pci_hif_map_service_to_pipe,
|
|
.get_default_pipe = ath10k_pci_hif_get_default_pipe,
|
|
.send_complete_check = ath10k_pci_hif_send_complete_check,
|
|
.get_free_queue_number = ath10k_pci_hif_get_free_queue_number,
|
|
.power_up = ath10k_pci_hif_power_up,
|
|
.power_down = ath10k_pci_hif_power_down,
|
|
.read32 = ath10k_pci_read32,
|
|
.write32 = ath10k_pci_write32,
|
|
.suspend = ath10k_pci_hif_suspend,
|
|
.resume = ath10k_pci_hif_resume,
|
|
.fetch_cal_eeprom = ath10k_pci_hif_fetch_cal_eeprom,
|
|
};
|
|
|
|
/*
|
|
* Top-level interrupt handler for all PCI interrupts from a Target.
|
|
* When a block of MSI interrupts is allocated, this top-level handler
|
|
* is not used; instead, we directly call the correct sub-handler.
|
|
*/
|
|
static irqreturn_t ath10k_pci_interrupt_handler(int irq, void *arg)
|
|
{
|
|
struct ath10k *ar = arg;
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
if (ath10k_pci_has_device_gone(ar))
|
|
return IRQ_NONE;
|
|
|
|
ret = ath10k_pci_force_wake(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wake device up on irq: %d\n", ret);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if ((ar_pci->oper_irq_mode == ATH10K_PCI_IRQ_LEGACY) &&
|
|
!ath10k_pci_irq_pending(ar))
|
|
return IRQ_NONE;
|
|
|
|
ath10k_pci_disable_and_clear_legacy_irq(ar);
|
|
ath10k_pci_irq_msi_fw_mask(ar);
|
|
napi_schedule(&ar->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ath10k_pci_napi_poll(struct napi_struct *ctx, int budget)
|
|
{
|
|
struct ath10k *ar = container_of(ctx, struct ath10k, napi);
|
|
int done = 0;
|
|
|
|
if (ath10k_pci_has_fw_crashed(ar)) {
|
|
ath10k_pci_fw_crashed_clear(ar);
|
|
ath10k_pci_fw_crashed_dump(ar);
|
|
napi_complete(ctx);
|
|
return done;
|
|
}
|
|
|
|
ath10k_ce_per_engine_service_any(ar);
|
|
|
|
done = ath10k_htt_txrx_compl_task(ar, budget);
|
|
|
|
if (done < budget) {
|
|
napi_complete_done(ctx, done);
|
|
/* In case of MSI, it is possible that interrupts are received
|
|
* while NAPI poll is inprogress. So pending interrupts that are
|
|
* received after processing all copy engine pipes by NAPI poll
|
|
* will not be handled again. This is causing failure to
|
|
* complete boot sequence in x86 platform. So before enabling
|
|
* interrupts safer to check for pending interrupts for
|
|
* immediate servicing.
|
|
*/
|
|
if (ath10k_ce_interrupt_summary(ar)) {
|
|
napi_reschedule(ctx);
|
|
goto out;
|
|
}
|
|
ath10k_pci_enable_legacy_irq(ar);
|
|
ath10k_pci_irq_msi_fw_unmask(ar);
|
|
}
|
|
|
|
out:
|
|
return done;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq_msi(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ret = request_irq(ar_pci->pdev->irq,
|
|
ath10k_pci_interrupt_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request MSI irq %d: %d\n",
|
|
ar_pci->pdev->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq_legacy(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ret = request_irq(ar_pci->pdev->irq,
|
|
ath10k_pci_interrupt_handler,
|
|
IRQF_SHARED, "ath10k_pci", ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request legacy irq %d: %d\n",
|
|
ar_pci->pdev->irq, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_request_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
switch (ar_pci->oper_irq_mode) {
|
|
case ATH10K_PCI_IRQ_LEGACY:
|
|
return ath10k_pci_request_irq_legacy(ar);
|
|
case ATH10K_PCI_IRQ_MSI:
|
|
return ath10k_pci_request_irq_msi(ar);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void ath10k_pci_free_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
free_irq(ar_pci->pdev->irq, ar);
|
|
}
|
|
|
|
void ath10k_pci_init_napi(struct ath10k *ar)
|
|
{
|
|
netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_pci_napi_poll);
|
|
}
|
|
|
|
static int ath10k_pci_init_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
int ret;
|
|
|
|
ath10k_pci_init_napi(ar);
|
|
|
|
if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_AUTO)
|
|
ath10k_info(ar, "limiting irq mode to: %d\n",
|
|
ath10k_pci_irq_mode);
|
|
|
|
/* Try MSI */
|
|
if (ath10k_pci_irq_mode != ATH10K_PCI_IRQ_LEGACY) {
|
|
ar_pci->oper_irq_mode = ATH10K_PCI_IRQ_MSI;
|
|
ret = pci_enable_msi(ar_pci->pdev);
|
|
if (ret == 0)
|
|
return 0;
|
|
|
|
/* MHI failed, try legacy irq next */
|
|
}
|
|
|
|
/* Try legacy irq
|
|
*
|
|
* A potential race occurs here: The CORE_BASE write
|
|
* depends on target correctly decoding AXI address but
|
|
* host won't know when target writes BAR to CORE_CTRL.
|
|
* This write might get lost if target has NOT written BAR.
|
|
* For now, fix the race by repeating the write in below
|
|
* synchronization checking.
|
|
*/
|
|
ar_pci->oper_irq_mode = ATH10K_PCI_IRQ_LEGACY;
|
|
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
PCIE_INTR_FIRMWARE_MASK | PCIE_INTR_CE_MASK_ALL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ath10k_pci_deinit_irq_legacy(struct ath10k *ar)
|
|
{
|
|
ath10k_pci_write32(ar, SOC_CORE_BASE_ADDRESS + PCIE_INTR_ENABLE_ADDRESS,
|
|
0);
|
|
}
|
|
|
|
static int ath10k_pci_deinit_irq(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
switch (ar_pci->oper_irq_mode) {
|
|
case ATH10K_PCI_IRQ_LEGACY:
|
|
ath10k_pci_deinit_irq_legacy(ar);
|
|
break;
|
|
default:
|
|
pci_disable_msi(ar_pci->pdev);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ath10k_pci_wait_for_target_init(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
unsigned long timeout;
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot waiting target to initialise\n");
|
|
|
|
timeout = jiffies + msecs_to_jiffies(ATH10K_PCI_TARGET_WAIT);
|
|
|
|
do {
|
|
val = ath10k_pci_read32(ar, FW_INDICATOR_ADDRESS);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target indicator %x\n",
|
|
val);
|
|
|
|
/* target should never return this */
|
|
if (val == 0xffffffff)
|
|
continue;
|
|
|
|
/* the device has crashed so don't bother trying anymore */
|
|
if (val & FW_IND_EVENT_PENDING)
|
|
break;
|
|
|
|
if (val & FW_IND_INITIALIZED)
|
|
break;
|
|
|
|
if (ar_pci->oper_irq_mode == ATH10K_PCI_IRQ_LEGACY)
|
|
/* Fix potential race by repeating CORE_BASE writes */
|
|
ath10k_pci_enable_legacy_irq(ar);
|
|
|
|
mdelay(10);
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
ath10k_pci_disable_and_clear_legacy_irq(ar);
|
|
ath10k_pci_irq_msi_fw_mask(ar);
|
|
|
|
if (val == 0xffffffff) {
|
|
ath10k_err(ar, "failed to read device register, device is gone\n");
|
|
return -EIO;
|
|
}
|
|
|
|
if (val & FW_IND_EVENT_PENDING) {
|
|
ath10k_warn(ar, "device has crashed during init\n");
|
|
return -ECOMM;
|
|
}
|
|
|
|
if (!(val & FW_IND_INITIALIZED)) {
|
|
ath10k_err(ar, "failed to receive initialized event from target: %08x\n",
|
|
val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot target initialised\n");
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_cold_reset(struct ath10k *ar)
|
|
{
|
|
u32 val;
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset\n");
|
|
|
|
spin_lock_bh(&ar->data_lock);
|
|
|
|
ar->stats.fw_cold_reset_counter++;
|
|
|
|
spin_unlock_bh(&ar->data_lock);
|
|
|
|
/* Put Target, including PCIe, into RESET. */
|
|
val = ath10k_pci_reg_read32(ar, SOC_GLOBAL_RESET_ADDRESS);
|
|
val |= 1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
/* After writing into SOC_GLOBAL_RESET to put device into
|
|
* reset and pulling out of reset pcie may not be stable
|
|
* for any immediate pcie register access and cause bus error,
|
|
* add delay before any pcie access request to fix this issue.
|
|
*/
|
|
msleep(20);
|
|
|
|
/* Pull Target, including PCIe, out of RESET. */
|
|
val &= ~1;
|
|
ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val);
|
|
|
|
msleep(20);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot cold reset complete\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ath10k_pci_claim(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
int ret;
|
|
|
|
pci_set_drvdata(pdev, ar);
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to enable pci device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = pci_request_region(pdev, BAR_NUM, "ath");
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to request region BAR%d: %d\n", BAR_NUM,
|
|
ret);
|
|
goto err_device;
|
|
}
|
|
|
|
/* Target expects 32 bit DMA. Enforce it. */
|
|
ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to set dma mask to 32-bit: %d\n", ret);
|
|
goto err_region;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Arrange for access to Target SoC registers. */
|
|
ar_pci->mem_len = pci_resource_len(pdev, BAR_NUM);
|
|
ar_pci->mem = pci_iomap(pdev, BAR_NUM, 0);
|
|
if (!ar_pci->mem) {
|
|
ath10k_err(ar, "failed to iomap BAR%d\n", BAR_NUM);
|
|
ret = -EIO;
|
|
goto err_master;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot pci_mem 0x%pK\n", ar_pci->mem);
|
|
return 0;
|
|
|
|
err_master:
|
|
pci_clear_master(pdev);
|
|
|
|
err_region:
|
|
pci_release_region(pdev, BAR_NUM);
|
|
|
|
err_device:
|
|
pci_disable_device(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_release(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct pci_dev *pdev = ar_pci->pdev;
|
|
|
|
pci_iounmap(pdev, ar_pci->mem);
|
|
pci_release_region(pdev, BAR_NUM);
|
|
pci_clear_master(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static bool ath10k_pci_chip_is_supported(u32 dev_id, u32 chip_id)
|
|
{
|
|
const struct ath10k_pci_supp_chip *supp_chip;
|
|
int i;
|
|
u32 rev_id = MS(chip_id, SOC_CHIP_ID_REV);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ath10k_pci_supp_chips); i++) {
|
|
supp_chip = &ath10k_pci_supp_chips[i];
|
|
|
|
if (supp_chip->dev_id == dev_id &&
|
|
supp_chip->rev_id == rev_id)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
int ath10k_pci_setup_resource(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
struct ath10k_ce *ce = ath10k_ce_priv(ar);
|
|
int ret;
|
|
|
|
spin_lock_init(&ce->ce_lock);
|
|
spin_lock_init(&ar_pci->ps_lock);
|
|
mutex_init(&ar_pci->ce_diag_mutex);
|
|
|
|
INIT_WORK(&ar_pci->dump_work, ath10k_pci_fw_dump_work);
|
|
|
|
timer_setup(&ar_pci->rx_post_retry, ath10k_pci_rx_replenish_retry, 0);
|
|
|
|
ar_pci->attr = kmemdup(pci_host_ce_config_wlan,
|
|
sizeof(pci_host_ce_config_wlan),
|
|
GFP_KERNEL);
|
|
if (!ar_pci->attr)
|
|
return -ENOMEM;
|
|
|
|
ar_pci->pipe_config = kmemdup(pci_target_ce_config_wlan,
|
|
sizeof(pci_target_ce_config_wlan),
|
|
GFP_KERNEL);
|
|
if (!ar_pci->pipe_config) {
|
|
ret = -ENOMEM;
|
|
goto err_free_attr;
|
|
}
|
|
|
|
ar_pci->serv_to_pipe = kmemdup(pci_target_service_to_ce_map_wlan,
|
|
sizeof(pci_target_service_to_ce_map_wlan),
|
|
GFP_KERNEL);
|
|
if (!ar_pci->serv_to_pipe) {
|
|
ret = -ENOMEM;
|
|
goto err_free_pipe_config;
|
|
}
|
|
|
|
if (QCA_REV_6174(ar) || QCA_REV_9377(ar))
|
|
ath10k_pci_override_ce_config(ar);
|
|
|
|
ret = ath10k_pci_alloc_pipes(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
|
|
ret);
|
|
goto err_free_serv_to_pipe;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_serv_to_pipe:
|
|
kfree(ar_pci->serv_to_pipe);
|
|
err_free_pipe_config:
|
|
kfree(ar_pci->pipe_config);
|
|
err_free_attr:
|
|
kfree(ar_pci->attr);
|
|
return ret;
|
|
}
|
|
|
|
void ath10k_pci_release_resource(struct ath10k *ar)
|
|
{
|
|
struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
|
|
|
|
ath10k_pci_rx_retry_sync(ar);
|
|
netif_napi_del(&ar->napi);
|
|
ath10k_pci_ce_deinit(ar);
|
|
ath10k_pci_free_pipes(ar);
|
|
kfree(ar_pci->attr);
|
|
kfree(ar_pci->pipe_config);
|
|
kfree(ar_pci->serv_to_pipe);
|
|
}
|
|
|
|
static const struct ath10k_bus_ops ath10k_pci_bus_ops = {
|
|
.read32 = ath10k_bus_pci_read32,
|
|
.write32 = ath10k_bus_pci_write32,
|
|
.get_num_banks = ath10k_pci_get_num_banks,
|
|
};
|
|
|
|
static int ath10k_pci_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *pci_dev)
|
|
{
|
|
int ret = 0;
|
|
struct ath10k *ar;
|
|
struct ath10k_pci *ar_pci;
|
|
enum ath10k_hw_rev hw_rev;
|
|
struct ath10k_bus_params bus_params = {};
|
|
bool pci_ps, is_qca988x = false;
|
|
int (*pci_soft_reset)(struct ath10k *ar);
|
|
int (*pci_hard_reset)(struct ath10k *ar);
|
|
u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
|
|
|
|
switch (pci_dev->device) {
|
|
case QCA988X_2_0_DEVICE_ID_UBNT:
|
|
case QCA988X_2_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA988X;
|
|
pci_ps = false;
|
|
is_qca988x = true;
|
|
pci_soft_reset = ath10k_pci_warm_reset;
|
|
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA9887_1_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA9887;
|
|
pci_ps = false;
|
|
pci_soft_reset = ath10k_pci_warm_reset;
|
|
pci_hard_reset = ath10k_pci_qca988x_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca988x_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA6164_2_1_DEVICE_ID:
|
|
case QCA6174_2_1_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA6174;
|
|
pci_ps = true;
|
|
pci_soft_reset = ath10k_pci_warm_reset;
|
|
pci_hard_reset = ath10k_pci_qca6174_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca6174_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA99X0_2_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA99X0;
|
|
pci_ps = false;
|
|
pci_soft_reset = ath10k_pci_qca99x0_soft_chip_reset;
|
|
pci_hard_reset = ath10k_pci_qca99x0_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca99x0_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA9984_1_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA9984;
|
|
pci_ps = false;
|
|
pci_soft_reset = ath10k_pci_qca99x0_soft_chip_reset;
|
|
pci_hard_reset = ath10k_pci_qca99x0_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca99x0_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA9888_2_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA9888;
|
|
pci_ps = false;
|
|
pci_soft_reset = ath10k_pci_qca99x0_soft_chip_reset;
|
|
pci_hard_reset = ath10k_pci_qca99x0_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca99x0_targ_cpu_to_ce_addr;
|
|
break;
|
|
case QCA9377_1_0_DEVICE_ID:
|
|
hw_rev = ATH10K_HW_QCA9377;
|
|
pci_ps = true;
|
|
pci_soft_reset = ath10k_pci_warm_reset;
|
|
pci_hard_reset = ath10k_pci_qca6174_chip_reset;
|
|
targ_cpu_to_ce_addr = ath10k_pci_qca6174_targ_cpu_to_ce_addr;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev, ATH10K_BUS_PCI,
|
|
hw_rev, &ath10k_pci_hif_ops);
|
|
if (!ar) {
|
|
dev_err(&pdev->dev, "failed to allocate core\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_BOOT, "pci probe %04x:%04x %04x:%04x\n",
|
|
pdev->vendor, pdev->device,
|
|
pdev->subsystem_vendor, pdev->subsystem_device);
|
|
|
|
ar_pci = ath10k_pci_priv(ar);
|
|
ar_pci->pdev = pdev;
|
|
ar_pci->dev = &pdev->dev;
|
|
ar_pci->ar = ar;
|
|
ar->dev_id = pci_dev->device;
|
|
ar_pci->pci_ps = pci_ps;
|
|
ar_pci->ce.bus_ops = &ath10k_pci_bus_ops;
|
|
ar_pci->pci_soft_reset = pci_soft_reset;
|
|
ar_pci->pci_hard_reset = pci_hard_reset;
|
|
ar_pci->targ_cpu_to_ce_addr = targ_cpu_to_ce_addr;
|
|
ar->ce_priv = &ar_pci->ce;
|
|
|
|
ar->id.vendor = pdev->vendor;
|
|
ar->id.device = pdev->device;
|
|
ar->id.subsystem_vendor = pdev->subsystem_vendor;
|
|
ar->id.subsystem_device = pdev->subsystem_device;
|
|
|
|
timer_setup(&ar_pci->ps_timer, ath10k_pci_ps_timer, 0);
|
|
|
|
ret = ath10k_pci_setup_resource(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to setup resource: %d\n", ret);
|
|
goto err_core_destroy;
|
|
}
|
|
|
|
ret = ath10k_pci_claim(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to claim device: %d\n", ret);
|
|
goto err_free_pipes;
|
|
}
|
|
|
|
ret = ath10k_pci_force_wake(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to wake up device : %d\n", ret);
|
|
goto err_sleep;
|
|
}
|
|
|
|
ath10k_pci_ce_deinit(ar);
|
|
ath10k_pci_irq_disable(ar);
|
|
|
|
ret = ath10k_pci_init_irq(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to init irqs: %d\n", ret);
|
|
goto err_sleep;
|
|
}
|
|
|
|
ath10k_info(ar, "pci irq %s oper_irq_mode %d irq_mode %d reset_mode %d\n",
|
|
ath10k_pci_get_irq_method(ar), ar_pci->oper_irq_mode,
|
|
ath10k_pci_irq_mode, ath10k_pci_reset_mode);
|
|
|
|
ret = ath10k_pci_request_irq(ar);
|
|
if (ret) {
|
|
ath10k_warn(ar, "failed to request irqs: %d\n", ret);
|
|
goto err_deinit_irq;
|
|
}
|
|
|
|
bus_params.dev_type = ATH10K_DEV_TYPE_LL;
|
|
bus_params.link_can_suspend = true;
|
|
/* Read CHIP_ID before reset to catch QCA9880-AR1A v1 devices that
|
|
* fall off the bus during chip_reset. These chips have the same pci
|
|
* device id as the QCA9880 BR4A or 2R4E. So that's why the check.
|
|
*/
|
|
if (is_qca988x) {
|
|
bus_params.chip_id =
|
|
ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
|
|
if (bus_params.chip_id != 0xffffffff) {
|
|
if (!ath10k_pci_chip_is_supported(pdev->device,
|
|
bus_params.chip_id)) {
|
|
ret = -ENODEV;
|
|
goto err_unsupported;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = ath10k_pci_chip_reset(ar);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to reset chip: %d\n", ret);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
|
|
if (bus_params.chip_id == 0xffffffff) {
|
|
ret = -ENODEV;
|
|
goto err_unsupported;
|
|
}
|
|
|
|
if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
|
|
ret = -ENODEV;
|
|
goto err_unsupported;
|
|
}
|
|
|
|
ret = ath10k_core_register(ar, &bus_params);
|
|
if (ret) {
|
|
ath10k_err(ar, "failed to register driver core: %d\n", ret);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unsupported:
|
|
ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
|
|
pdev->device, bus_params.chip_id);
|
|
|
|
err_free_irq:
|
|
ath10k_pci_free_irq(ar);
|
|
|
|
err_deinit_irq:
|
|
ath10k_pci_release_resource(ar);
|
|
|
|
err_sleep:
|
|
ath10k_pci_sleep_sync(ar);
|
|
ath10k_pci_release(ar);
|
|
|
|
err_free_pipes:
|
|
ath10k_pci_free_pipes(ar);
|
|
|
|
err_core_destroy:
|
|
ath10k_core_destroy(ar);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ath10k_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ath10k *ar = pci_get_drvdata(pdev);
|
|
|
|
ath10k_dbg(ar, ATH10K_DBG_PCI, "pci remove\n");
|
|
|
|
if (!ar)
|
|
return;
|
|
|
|
ath10k_core_unregister(ar);
|
|
ath10k_pci_free_irq(ar);
|
|
ath10k_pci_deinit_irq(ar);
|
|
ath10k_pci_release_resource(ar);
|
|
ath10k_pci_sleep_sync(ar);
|
|
ath10k_pci_release(ar);
|
|
ath10k_core_destroy(ar);
|
|
}
|
|
|
|
MODULE_DEVICE_TABLE(pci, ath10k_pci_id_table);
|
|
|
|
static __maybe_unused int ath10k_pci_pm_suspend(struct device *dev)
|
|
{
|
|
struct ath10k *ar = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = ath10k_pci_suspend(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to suspend hif: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static __maybe_unused int ath10k_pci_pm_resume(struct device *dev)
|
|
{
|
|
struct ath10k *ar = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = ath10k_pci_resume(ar);
|
|
if (ret)
|
|
ath10k_warn(ar, "failed to resume hif: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(ath10k_pci_pm_ops,
|
|
ath10k_pci_pm_suspend,
|
|
ath10k_pci_pm_resume);
|
|
|
|
static struct pci_driver ath10k_pci_driver = {
|
|
.name = "ath10k_pci",
|
|
.id_table = ath10k_pci_id_table,
|
|
.probe = ath10k_pci_probe,
|
|
.remove = ath10k_pci_remove,
|
|
#ifdef CONFIG_PM
|
|
.driver.pm = &ath10k_pci_pm_ops,
|
|
#endif
|
|
};
|
|
|
|
static int __init ath10k_pci_init(void)
|
|
{
|
|
int ret1, ret2;
|
|
|
|
ret1 = pci_register_driver(&ath10k_pci_driver);
|
|
if (ret1)
|
|
printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
|
|
ret1);
|
|
|
|
ret2 = ath10k_ahb_init();
|
|
if (ret2)
|
|
printk(KERN_ERR "ahb init failed: %d\n", ret2);
|
|
|
|
if (ret1 && ret2)
|
|
return ret1;
|
|
|
|
/* registered to at least one bus */
|
|
return 0;
|
|
}
|
|
module_init(ath10k_pci_init);
|
|
|
|
static void __exit ath10k_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ath10k_pci_driver);
|
|
ath10k_ahb_exit();
|
|
}
|
|
|
|
module_exit(ath10k_pci_exit);
|
|
|
|
MODULE_AUTHOR("Qualcomm Atheros");
|
|
MODULE_DESCRIPTION("Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
/* QCA988x 2.0 firmware files */
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API2_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API3_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API4_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_FW_API5_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
|
|
MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" ATH10K_BOARD_API2_FILE);
|
|
|
|
/* QCA9887 1.0 firmware files */
|
|
MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" ATH10K_FW_API5_FILE);
|
|
MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" QCA9887_HW_1_0_BOARD_DATA_FILE);
|
|
MODULE_FIRMWARE(QCA9887_HW_1_0_FW_DIR "/" ATH10K_BOARD_API2_FILE);
|
|
|
|
/* QCA6174 2.1 firmware files */
|
|
MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API4_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API5_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" QCA6174_HW_2_1_BOARD_DATA_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_BOARD_API2_FILE);
|
|
|
|
/* QCA6174 3.1 firmware files */
|
|
MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_FW_API4_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_FW_API5_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_FW_API6_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" QCA6174_HW_3_0_BOARD_DATA_FILE);
|
|
MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_BOARD_API2_FILE);
|
|
|
|
/* QCA9377 1.0 firmware files */
|
|
MODULE_FIRMWARE(QCA9377_HW_1_0_FW_DIR "/" ATH10K_FW_API6_FILE);
|
|
MODULE_FIRMWARE(QCA9377_HW_1_0_FW_DIR "/" ATH10K_FW_API5_FILE);
|
|
MODULE_FIRMWARE(QCA9377_HW_1_0_FW_DIR "/" QCA9377_HW_1_0_BOARD_DATA_FILE);
|