1017 lines
24 KiB
C
1017 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CAN driver for "8 devices" USB2CAN converter
|
|
*
|
|
* Copyright (C) 2012 Bernd Krumboeck (krumboeck@universalnet.at)
|
|
*
|
|
* This driver is inspired by the 3.2.0 version of drivers/net/can/usb/ems_usb.c
|
|
* and drivers/net/can/usb/esd_usb2.c
|
|
*
|
|
* Many thanks to Gerhard Bertelsmann (info@gerhard-bertelsmann.de)
|
|
* for testing and fixing this driver. Also many thanks to "8 devices",
|
|
* who were very cooperative and answered my questions.
|
|
*/
|
|
|
|
#include <linux/ethtool.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
|
|
/* driver constants */
|
|
#define MAX_RX_URBS 20
|
|
#define MAX_TX_URBS 20
|
|
#define RX_BUFFER_SIZE 64
|
|
|
|
/* vendor and product id */
|
|
#define USB_8DEV_VENDOR_ID 0x0483
|
|
#define USB_8DEV_PRODUCT_ID 0x1234
|
|
|
|
/* endpoints */
|
|
enum usb_8dev_endpoint {
|
|
USB_8DEV_ENDP_DATA_RX = 1,
|
|
USB_8DEV_ENDP_DATA_TX,
|
|
USB_8DEV_ENDP_CMD_RX,
|
|
USB_8DEV_ENDP_CMD_TX
|
|
};
|
|
|
|
/* device CAN clock */
|
|
#define USB_8DEV_ABP_CLOCK 32000000
|
|
|
|
/* setup flags */
|
|
#define USB_8DEV_SILENT 0x01
|
|
#define USB_8DEV_LOOPBACK 0x02
|
|
#define USB_8DEV_DISABLE_AUTO_RESTRANS 0x04
|
|
#define USB_8DEV_STATUS_FRAME 0x08
|
|
|
|
/* commands */
|
|
enum usb_8dev_cmd {
|
|
USB_8DEV_RESET = 1,
|
|
USB_8DEV_OPEN,
|
|
USB_8DEV_CLOSE,
|
|
USB_8DEV_SET_SPEED,
|
|
USB_8DEV_SET_MASK_FILTER,
|
|
USB_8DEV_GET_STATUS,
|
|
USB_8DEV_GET_STATISTICS,
|
|
USB_8DEV_GET_SERIAL,
|
|
USB_8DEV_GET_SOFTW_VER,
|
|
USB_8DEV_GET_HARDW_VER,
|
|
USB_8DEV_RESET_TIMESTAMP,
|
|
USB_8DEV_GET_SOFTW_HARDW_VER
|
|
};
|
|
|
|
/* command options */
|
|
#define USB_8DEV_BAUD_MANUAL 0x09
|
|
#define USB_8DEV_CMD_START 0x11
|
|
#define USB_8DEV_CMD_END 0x22
|
|
|
|
#define USB_8DEV_CMD_SUCCESS 0
|
|
#define USB_8DEV_CMD_ERROR 255
|
|
|
|
#define USB_8DEV_CMD_TIMEOUT 1000
|
|
|
|
/* frames */
|
|
#define USB_8DEV_DATA_START 0x55
|
|
#define USB_8DEV_DATA_END 0xAA
|
|
|
|
#define USB_8DEV_TYPE_CAN_FRAME 0
|
|
#define USB_8DEV_TYPE_ERROR_FRAME 3
|
|
|
|
#define USB_8DEV_EXTID 0x01
|
|
#define USB_8DEV_RTR 0x02
|
|
#define USB_8DEV_ERR_FLAG 0x04
|
|
|
|
/* status */
|
|
#define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */
|
|
#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */
|
|
#define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */
|
|
#define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */
|
|
#define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */
|
|
#define USB_8DEV_STATUSMSG_STUFF 0x20 /* Stuff Error */
|
|
#define USB_8DEV_STATUSMSG_FORM 0x21 /* Form Error */
|
|
#define USB_8DEV_STATUSMSG_ACK 0x23 /* Ack Error */
|
|
#define USB_8DEV_STATUSMSG_BIT0 0x24 /* Bit1 Error */
|
|
#define USB_8DEV_STATUSMSG_BIT1 0x25 /* Bit0 Error */
|
|
#define USB_8DEV_STATUSMSG_CRC 0x27 /* CRC Error */
|
|
|
|
#define USB_8DEV_RP_MASK 0x7F /* Mask for Receive Error Bit */
|
|
|
|
|
|
/* table of devices that work with this driver */
|
|
static const struct usb_device_id usb_8dev_table[] = {
|
|
{ USB_DEVICE(USB_8DEV_VENDOR_ID, USB_8DEV_PRODUCT_ID) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, usb_8dev_table);
|
|
|
|
struct usb_8dev_tx_urb_context {
|
|
struct usb_8dev_priv *priv;
|
|
|
|
u32 echo_index;
|
|
};
|
|
|
|
/* Structure to hold all of our device specific stuff */
|
|
struct usb_8dev_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
|
|
struct usb_device *udev;
|
|
struct net_device *netdev;
|
|
|
|
atomic_t active_tx_urbs;
|
|
struct usb_anchor tx_submitted;
|
|
struct usb_8dev_tx_urb_context tx_contexts[MAX_TX_URBS];
|
|
|
|
struct usb_anchor rx_submitted;
|
|
|
|
struct can_berr_counter bec;
|
|
|
|
u8 *cmd_msg_buffer;
|
|
|
|
struct mutex usb_8dev_cmd_lock;
|
|
void *rxbuf[MAX_RX_URBS];
|
|
dma_addr_t rxbuf_dma[MAX_RX_URBS];
|
|
};
|
|
|
|
/* tx frame */
|
|
struct __packed usb_8dev_tx_msg {
|
|
u8 begin;
|
|
u8 flags; /* RTR and EXT_ID flag */
|
|
__be32 id; /* upper 3 bits not used */
|
|
u8 dlc; /* data length code 0-8 bytes */
|
|
u8 data[8]; /* 64-bit data */
|
|
u8 end;
|
|
};
|
|
|
|
/* rx frame */
|
|
struct __packed usb_8dev_rx_msg {
|
|
u8 begin;
|
|
u8 type; /* frame type */
|
|
u8 flags; /* RTR and EXT_ID flag */
|
|
__be32 id; /* upper 3 bits not used */
|
|
u8 dlc; /* data length code 0-8 bytes */
|
|
u8 data[8]; /* 64-bit data */
|
|
__be32 timestamp; /* 32-bit timestamp */
|
|
u8 end;
|
|
};
|
|
|
|
/* command frame */
|
|
struct __packed usb_8dev_cmd_msg {
|
|
u8 begin;
|
|
u8 channel; /* unknown - always 0 */
|
|
u8 command; /* command to execute */
|
|
u8 opt1; /* optional parameter / return value */
|
|
u8 opt2; /* optional parameter 2 */
|
|
u8 data[10]; /* optional parameter and data */
|
|
u8 end;
|
|
};
|
|
|
|
static int usb_8dev_send_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size)
|
|
{
|
|
int actual_length;
|
|
|
|
return usb_bulk_msg(priv->udev,
|
|
usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_TX),
|
|
msg, size, &actual_length, USB_8DEV_CMD_TIMEOUT);
|
|
}
|
|
|
|
static int usb_8dev_wait_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size,
|
|
int *actual_length)
|
|
{
|
|
return usb_bulk_msg(priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_RX),
|
|
msg, size, actual_length, USB_8DEV_CMD_TIMEOUT);
|
|
}
|
|
|
|
/* Send command to device and receive result.
|
|
* Command was successful when opt1 = 0.
|
|
*/
|
|
static int usb_8dev_send_cmd(struct usb_8dev_priv *priv,
|
|
struct usb_8dev_cmd_msg *out,
|
|
struct usb_8dev_cmd_msg *in)
|
|
{
|
|
int err;
|
|
int num_bytes_read;
|
|
struct net_device *netdev;
|
|
|
|
netdev = priv->netdev;
|
|
|
|
out->begin = USB_8DEV_CMD_START;
|
|
out->end = USB_8DEV_CMD_END;
|
|
|
|
mutex_lock(&priv->usb_8dev_cmd_lock);
|
|
|
|
memcpy(priv->cmd_msg_buffer, out,
|
|
sizeof(struct usb_8dev_cmd_msg));
|
|
|
|
err = usb_8dev_send_cmd_msg(priv, priv->cmd_msg_buffer,
|
|
sizeof(struct usb_8dev_cmd_msg));
|
|
if (err < 0) {
|
|
netdev_err(netdev, "sending command message failed\n");
|
|
goto failed;
|
|
}
|
|
|
|
err = usb_8dev_wait_cmd_msg(priv, priv->cmd_msg_buffer,
|
|
sizeof(struct usb_8dev_cmd_msg),
|
|
&num_bytes_read);
|
|
if (err < 0) {
|
|
netdev_err(netdev, "no command message answer\n");
|
|
goto failed;
|
|
}
|
|
|
|
memcpy(in, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg));
|
|
|
|
if (in->begin != USB_8DEV_CMD_START || in->end != USB_8DEV_CMD_END ||
|
|
num_bytes_read != 16 || in->opt1 != 0)
|
|
err = -EPROTO;
|
|
|
|
failed:
|
|
mutex_unlock(&priv->usb_8dev_cmd_lock);
|
|
return err;
|
|
}
|
|
|
|
/* Send open command to device */
|
|
static int usb_8dev_cmd_open(struct usb_8dev_priv *priv)
|
|
{
|
|
struct can_bittiming *bt = &priv->can.bittiming;
|
|
struct usb_8dev_cmd_msg outmsg;
|
|
struct usb_8dev_cmd_msg inmsg;
|
|
u32 ctrlmode = priv->can.ctrlmode;
|
|
u32 flags = USB_8DEV_STATUS_FRAME;
|
|
__be32 beflags;
|
|
__be16 bebrp;
|
|
|
|
memset(&outmsg, 0, sizeof(outmsg));
|
|
outmsg.command = USB_8DEV_OPEN;
|
|
outmsg.opt1 = USB_8DEV_BAUD_MANUAL;
|
|
outmsg.data[0] = bt->prop_seg + bt->phase_seg1;
|
|
outmsg.data[1] = bt->phase_seg2;
|
|
outmsg.data[2] = bt->sjw;
|
|
|
|
/* BRP */
|
|
bebrp = cpu_to_be16((u16)bt->brp);
|
|
memcpy(&outmsg.data[3], &bebrp, sizeof(bebrp));
|
|
|
|
/* flags */
|
|
if (ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
flags |= USB_8DEV_LOOPBACK;
|
|
if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
flags |= USB_8DEV_SILENT;
|
|
if (ctrlmode & CAN_CTRLMODE_ONE_SHOT)
|
|
flags |= USB_8DEV_DISABLE_AUTO_RESTRANS;
|
|
|
|
beflags = cpu_to_be32(flags);
|
|
memcpy(&outmsg.data[5], &beflags, sizeof(beflags));
|
|
|
|
return usb_8dev_send_cmd(priv, &outmsg, &inmsg);
|
|
}
|
|
|
|
/* Send close command to device */
|
|
static int usb_8dev_cmd_close(struct usb_8dev_priv *priv)
|
|
{
|
|
struct usb_8dev_cmd_msg inmsg;
|
|
struct usb_8dev_cmd_msg outmsg = {
|
|
.channel = 0,
|
|
.command = USB_8DEV_CLOSE,
|
|
.opt1 = 0,
|
|
.opt2 = 0
|
|
};
|
|
|
|
return usb_8dev_send_cmd(priv, &outmsg, &inmsg);
|
|
}
|
|
|
|
/* Get firmware and hardware version */
|
|
static int usb_8dev_cmd_version(struct usb_8dev_priv *priv, u32 *res)
|
|
{
|
|
struct usb_8dev_cmd_msg inmsg;
|
|
struct usb_8dev_cmd_msg outmsg = {
|
|
.channel = 0,
|
|
.command = USB_8DEV_GET_SOFTW_HARDW_VER,
|
|
.opt1 = 0,
|
|
.opt2 = 0
|
|
};
|
|
|
|
int err = usb_8dev_send_cmd(priv, &outmsg, &inmsg);
|
|
if (err)
|
|
return err;
|
|
|
|
*res = be32_to_cpup((__be32 *)inmsg.data);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Set network device mode
|
|
*
|
|
* Maybe we should leave this function empty, because the device
|
|
* set mode variable with open command.
|
|
*/
|
|
static int usb_8dev_set_mode(struct net_device *netdev, enum can_mode mode)
|
|
{
|
|
struct usb_8dev_priv *priv = netdev_priv(netdev);
|
|
int err = 0;
|
|
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
err = usb_8dev_cmd_open(priv);
|
|
if (err)
|
|
netdev_warn(netdev, "couldn't start device");
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Read error/status frames */
|
|
static void usb_8dev_rx_err_msg(struct usb_8dev_priv *priv,
|
|
struct usb_8dev_rx_msg *msg)
|
|
{
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
|
|
/* Error message:
|
|
* byte 0: Status
|
|
* byte 1: bit 7: Receive Passive
|
|
* byte 1: bit 0-6: Receive Error Counter
|
|
* byte 2: Transmit Error Counter
|
|
* byte 3: Always 0 (maybe reserved for future use)
|
|
*/
|
|
|
|
u8 state = msg->data[0];
|
|
u8 rxerr = msg->data[1] & USB_8DEV_RP_MASK;
|
|
u8 txerr = msg->data[2];
|
|
int rx_errors = 0;
|
|
int tx_errors = 0;
|
|
|
|
skb = alloc_can_err_skb(priv->netdev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
switch (state) {
|
|
case USB_8DEV_STATUSMSG_OK:
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
cf->can_id |= CAN_ERR_PROT;
|
|
cf->data[2] = CAN_ERR_PROT_ACTIVE;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_BUSOFF:
|
|
priv->can.state = CAN_STATE_BUS_OFF;
|
|
cf->can_id |= CAN_ERR_BUSOFF;
|
|
priv->can.can_stats.bus_off++;
|
|
can_bus_off(priv->netdev);
|
|
break;
|
|
case USB_8DEV_STATUSMSG_OVERRUN:
|
|
case USB_8DEV_STATUSMSG_BUSLIGHT:
|
|
case USB_8DEV_STATUSMSG_BUSHEAVY:
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
break;
|
|
default:
|
|
priv->can.state = CAN_STATE_ERROR_WARNING;
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
priv->can.can_stats.bus_error++;
|
|
break;
|
|
}
|
|
|
|
switch (state) {
|
|
case USB_8DEV_STATUSMSG_OK:
|
|
case USB_8DEV_STATUSMSG_BUSOFF:
|
|
break;
|
|
case USB_8DEV_STATUSMSG_ACK:
|
|
cf->can_id |= CAN_ERR_ACK;
|
|
tx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_CRC:
|
|
cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
|
|
rx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_BIT0:
|
|
cf->data[2] |= CAN_ERR_PROT_BIT0;
|
|
tx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_BIT1:
|
|
cf->data[2] |= CAN_ERR_PROT_BIT1;
|
|
tx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_FORM:
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
rx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_STUFF:
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
rx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_OVERRUN:
|
|
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
|
|
stats->rx_over_errors++;
|
|
rx_errors = 1;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_BUSLIGHT:
|
|
priv->can.state = CAN_STATE_ERROR_WARNING;
|
|
cf->data[1] = (txerr > rxerr) ?
|
|
CAN_ERR_CRTL_TX_WARNING :
|
|
CAN_ERR_CRTL_RX_WARNING;
|
|
priv->can.can_stats.error_warning++;
|
|
break;
|
|
case USB_8DEV_STATUSMSG_BUSHEAVY:
|
|
priv->can.state = CAN_STATE_ERROR_PASSIVE;
|
|
cf->data[1] = (txerr > rxerr) ?
|
|
CAN_ERR_CRTL_TX_PASSIVE :
|
|
CAN_ERR_CRTL_RX_PASSIVE;
|
|
priv->can.can_stats.error_passive++;
|
|
break;
|
|
default:
|
|
netdev_warn(priv->netdev,
|
|
"Unknown status/error message (%d)\n", state);
|
|
break;
|
|
}
|
|
|
|
if (tx_errors) {
|
|
cf->data[2] |= CAN_ERR_PROT_TX;
|
|
stats->tx_errors++;
|
|
}
|
|
|
|
if (rx_errors)
|
|
stats->rx_errors++;
|
|
if (priv->can.state != CAN_STATE_BUS_OFF) {
|
|
cf->can_id |= CAN_ERR_CNT;
|
|
cf->data[6] = txerr;
|
|
cf->data[7] = rxerr;
|
|
}
|
|
|
|
priv->bec.txerr = txerr;
|
|
priv->bec.rxerr = rxerr;
|
|
|
|
netif_rx(skb);
|
|
}
|
|
|
|
/* Read data and status frames */
|
|
static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv,
|
|
struct usb_8dev_rx_msg *msg)
|
|
{
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
struct net_device_stats *stats = &priv->netdev->stats;
|
|
|
|
if (msg->type == USB_8DEV_TYPE_ERROR_FRAME &&
|
|
msg->flags == USB_8DEV_ERR_FLAG) {
|
|
usb_8dev_rx_err_msg(priv, msg);
|
|
} else if (msg->type == USB_8DEV_TYPE_CAN_FRAME) {
|
|
skb = alloc_can_skb(priv->netdev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
cf->can_id = be32_to_cpu(msg->id);
|
|
can_frame_set_cc_len(cf, msg->dlc & 0xF, priv->can.ctrlmode);
|
|
|
|
if (msg->flags & USB_8DEV_EXTID)
|
|
cf->can_id |= CAN_EFF_FLAG;
|
|
|
|
if (msg->flags & USB_8DEV_RTR) {
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
} else {
|
|
memcpy(cf->data, msg->data, cf->len);
|
|
stats->rx_bytes += cf->len;
|
|
}
|
|
stats->rx_packets++;
|
|
|
|
netif_rx(skb);
|
|
} else {
|
|
netdev_warn(priv->netdev, "frame type %d unknown",
|
|
msg->type);
|
|
}
|
|
|
|
}
|
|
|
|
/* Callback for reading data from device
|
|
*
|
|
* Check urb status, call read function and resubmit urb read operation.
|
|
*/
|
|
static void usb_8dev_read_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_8dev_priv *priv = urb->context;
|
|
struct net_device *netdev;
|
|
int retval;
|
|
int pos = 0;
|
|
|
|
netdev = priv->netdev;
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
break;
|
|
|
|
case -ENOENT:
|
|
case -EPIPE:
|
|
case -EPROTO:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
|
|
default:
|
|
netdev_info(netdev, "Rx URB aborted (%d)\n",
|
|
urb->status);
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
while (pos < urb->actual_length) {
|
|
struct usb_8dev_rx_msg *msg;
|
|
|
|
if (pos + sizeof(struct usb_8dev_rx_msg) > urb->actual_length) {
|
|
netdev_err(priv->netdev, "format error\n");
|
|
break;
|
|
}
|
|
|
|
msg = (struct usb_8dev_rx_msg *)(urb->transfer_buffer + pos);
|
|
usb_8dev_rx_can_msg(priv, msg);
|
|
|
|
pos += sizeof(struct usb_8dev_rx_msg);
|
|
}
|
|
|
|
resubmit_urb:
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_RX),
|
|
urb->transfer_buffer, RX_BUFFER_SIZE,
|
|
usb_8dev_read_bulk_callback, priv);
|
|
|
|
retval = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
if (retval == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
else if (retval)
|
|
netdev_err(netdev,
|
|
"failed resubmitting read bulk urb: %d\n", retval);
|
|
}
|
|
|
|
/* Callback handler for write operations
|
|
*
|
|
* Free allocated buffers, check transmit status and
|
|
* calculate statistic.
|
|
*/
|
|
static void usb_8dev_write_bulk_callback(struct urb *urb)
|
|
{
|
|
struct usb_8dev_tx_urb_context *context = urb->context;
|
|
struct usb_8dev_priv *priv;
|
|
struct net_device *netdev;
|
|
|
|
BUG_ON(!context);
|
|
|
|
priv = context->priv;
|
|
netdev = priv->netdev;
|
|
|
|
/* free up our allocated buffer */
|
|
usb_free_coherent(urb->dev, urb->transfer_buffer_length,
|
|
urb->transfer_buffer, urb->transfer_dma);
|
|
|
|
atomic_dec(&priv->active_tx_urbs);
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
if (urb->status)
|
|
netdev_info(netdev, "Tx URB aborted (%d)\n",
|
|
urb->status);
|
|
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += can_get_echo_skb(netdev, context->echo_index, NULL);
|
|
|
|
/* Release context */
|
|
context->echo_index = MAX_TX_URBS;
|
|
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
/* Send data to device */
|
|
static netdev_tx_t usb_8dev_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct usb_8dev_priv *priv = netdev_priv(netdev);
|
|
struct net_device_stats *stats = &netdev->stats;
|
|
struct can_frame *cf = (struct can_frame *) skb->data;
|
|
struct usb_8dev_tx_msg *msg;
|
|
struct urb *urb;
|
|
struct usb_8dev_tx_urb_context *context = NULL;
|
|
u8 *buf;
|
|
int i, err;
|
|
size_t size = sizeof(struct usb_8dev_tx_msg);
|
|
|
|
if (can_dev_dropped_skb(netdev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
/* create a URB, and a buffer for it, and copy the data to the URB */
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
goto nomem;
|
|
|
|
buf = usb_alloc_coherent(priv->udev, size, GFP_ATOMIC,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
goto nomembuf;
|
|
}
|
|
|
|
memset(buf, 0, size);
|
|
|
|
msg = (struct usb_8dev_tx_msg *)buf;
|
|
msg->begin = USB_8DEV_DATA_START;
|
|
msg->flags = 0x00;
|
|
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
msg->flags |= USB_8DEV_RTR;
|
|
|
|
if (cf->can_id & CAN_EFF_FLAG)
|
|
msg->flags |= USB_8DEV_EXTID;
|
|
|
|
msg->id = cpu_to_be32(cf->can_id & CAN_ERR_MASK);
|
|
msg->dlc = can_get_cc_dlc(cf, priv->can.ctrlmode);
|
|
memcpy(msg->data, cf->data, cf->len);
|
|
msg->end = USB_8DEV_DATA_END;
|
|
|
|
for (i = 0; i < MAX_TX_URBS; i++) {
|
|
if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
|
|
context = &priv->tx_contexts[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* May never happen! When this happens we'd more URBs in flight as
|
|
* allowed (MAX_TX_URBS).
|
|
*/
|
|
if (!context)
|
|
goto nofreecontext;
|
|
|
|
context->priv = priv;
|
|
context->echo_index = i;
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_DATA_TX),
|
|
buf, size, usb_8dev_write_bulk_callback, context);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->tx_submitted);
|
|
|
|
can_put_echo_skb(skb, netdev, context->echo_index, 0);
|
|
|
|
atomic_inc(&priv->active_tx_urbs);
|
|
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (unlikely(err)) {
|
|
can_free_echo_skb(netdev, context->echo_index, NULL);
|
|
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
|
|
|
|
atomic_dec(&priv->active_tx_urbs);
|
|
|
|
if (err == -ENODEV)
|
|
netif_device_detach(netdev);
|
|
else
|
|
netdev_warn(netdev, "failed tx_urb %d\n", err);
|
|
stats->tx_dropped++;
|
|
} else if (atomic_read(&priv->active_tx_urbs) >= MAX_TX_URBS)
|
|
/* Slow down tx path */
|
|
netif_stop_queue(netdev);
|
|
|
|
/* Release our reference to this URB, the USB core will eventually free
|
|
* it entirely.
|
|
*/
|
|
usb_free_urb(urb);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
nofreecontext:
|
|
usb_free_coherent(priv->udev, size, buf, urb->transfer_dma);
|
|
usb_free_urb(urb);
|
|
|
|
netdev_warn(netdev, "couldn't find free context");
|
|
|
|
return NETDEV_TX_BUSY;
|
|
|
|
nomembuf:
|
|
usb_free_urb(urb);
|
|
|
|
nomem:
|
|
dev_kfree_skb(skb);
|
|
stats->tx_dropped++;
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int usb_8dev_get_berr_counter(const struct net_device *netdev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct usb_8dev_priv *priv = netdev_priv(netdev);
|
|
|
|
bec->txerr = priv->bec.txerr;
|
|
bec->rxerr = priv->bec.rxerr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Start USB device */
|
|
static int usb_8dev_start(struct usb_8dev_priv *priv)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
int err, i;
|
|
|
|
for (i = 0; i < MAX_RX_URBS; i++) {
|
|
struct urb *urb = NULL;
|
|
u8 *buf;
|
|
dma_addr_t buf_dma;
|
|
|
|
/* create a URB, and a buffer for it */
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb) {
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
buf = usb_alloc_coherent(priv->udev, RX_BUFFER_SIZE, GFP_KERNEL,
|
|
&buf_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
usb_free_urb(urb);
|
|
err = -ENOMEM;
|
|
break;
|
|
}
|
|
|
|
urb->transfer_dma = buf_dma;
|
|
|
|
usb_fill_bulk_urb(urb, priv->udev,
|
|
usb_rcvbulkpipe(priv->udev,
|
|
USB_8DEV_ENDP_DATA_RX),
|
|
buf, RX_BUFFER_SIZE,
|
|
usb_8dev_read_bulk_callback, priv);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &priv->rx_submitted);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(priv->udev, RX_BUFFER_SIZE, buf,
|
|
urb->transfer_dma);
|
|
usb_free_urb(urb);
|
|
break;
|
|
}
|
|
|
|
priv->rxbuf[i] = buf;
|
|
priv->rxbuf_dma[i] = buf_dma;
|
|
|
|
/* Drop reference, USB core will take care of freeing it */
|
|
usb_free_urb(urb);
|
|
}
|
|
|
|
/* Did we submit any URBs */
|
|
if (i == 0) {
|
|
netdev_warn(netdev, "couldn't setup read URBs\n");
|
|
return err;
|
|
}
|
|
|
|
/* Warn if we've couldn't transmit all the URBs */
|
|
if (i < MAX_RX_URBS)
|
|
netdev_warn(netdev, "rx performance may be slow\n");
|
|
|
|
err = usb_8dev_cmd_open(priv);
|
|
if (err)
|
|
goto failed;
|
|
|
|
priv->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
|
|
netdev_warn(netdev, "couldn't submit control: %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* Open USB device */
|
|
static int usb_8dev_open(struct net_device *netdev)
|
|
{
|
|
struct usb_8dev_priv *priv = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* common open */
|
|
err = open_candev(netdev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* finally start device */
|
|
err = usb_8dev_start(priv);
|
|
if (err) {
|
|
if (err == -ENODEV)
|
|
netif_device_detach(priv->netdev);
|
|
|
|
netdev_warn(netdev, "couldn't start device: %d\n",
|
|
err);
|
|
|
|
close_candev(netdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void unlink_all_urbs(struct usb_8dev_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
usb_kill_anchored_urbs(&priv->rx_submitted);
|
|
|
|
for (i = 0; i < MAX_RX_URBS; ++i)
|
|
usb_free_coherent(priv->udev, RX_BUFFER_SIZE,
|
|
priv->rxbuf[i], priv->rxbuf_dma[i]);
|
|
|
|
usb_kill_anchored_urbs(&priv->tx_submitted);
|
|
atomic_set(&priv->active_tx_urbs, 0);
|
|
|
|
for (i = 0; i < MAX_TX_URBS; i++)
|
|
priv->tx_contexts[i].echo_index = MAX_TX_URBS;
|
|
}
|
|
|
|
/* Close USB device */
|
|
static int usb_8dev_close(struct net_device *netdev)
|
|
{
|
|
struct usb_8dev_priv *priv = netdev_priv(netdev);
|
|
int err = 0;
|
|
|
|
/* Send CLOSE command to CAN controller */
|
|
err = usb_8dev_cmd_close(priv);
|
|
if (err)
|
|
netdev_warn(netdev, "couldn't stop device");
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
/* Stop polling */
|
|
unlink_all_urbs(priv);
|
|
|
|
close_candev(netdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct net_device_ops usb_8dev_netdev_ops = {
|
|
.ndo_open = usb_8dev_open,
|
|
.ndo_stop = usb_8dev_close,
|
|
.ndo_start_xmit = usb_8dev_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static const struct ethtool_ops usb_8dev_ethtool_ops = {
|
|
.get_ts_info = ethtool_op_get_ts_info,
|
|
};
|
|
|
|
static const struct can_bittiming_const usb_8dev_bittiming_const = {
|
|
.name = KBUILD_MODNAME,
|
|
.tseg1_min = 1,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 1,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 1,
|
|
.brp_max = 1024,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
/* Probe USB device
|
|
*
|
|
* Check device and firmware.
|
|
* Set supported modes and bittiming constants.
|
|
* Allocate some memory.
|
|
*/
|
|
static int usb_8dev_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct net_device *netdev;
|
|
struct usb_8dev_priv *priv;
|
|
int i, err = -ENOMEM;
|
|
u32 version;
|
|
char buf[18];
|
|
struct usb_device *usbdev = interface_to_usbdev(intf);
|
|
|
|
/* product id looks strange, better we also check iProduct string */
|
|
if (usb_string(usbdev, usbdev->descriptor.iProduct, buf,
|
|
sizeof(buf)) > 0 && strcmp(buf, "USB2CAN converter")) {
|
|
dev_info(&usbdev->dev, "ignoring: not an USB2CAN converter\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
netdev = alloc_candev(sizeof(struct usb_8dev_priv), MAX_TX_URBS);
|
|
if (!netdev) {
|
|
dev_err(&intf->dev, "Couldn't alloc candev\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
priv = netdev_priv(netdev);
|
|
|
|
priv->udev = usbdev;
|
|
priv->netdev = netdev;
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
priv->can.clock.freq = USB_8DEV_ABP_CLOCK;
|
|
priv->can.bittiming_const = &usb_8dev_bittiming_const;
|
|
priv->can.do_set_mode = usb_8dev_set_mode;
|
|
priv->can.do_get_berr_counter = usb_8dev_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
|
|
CAN_CTRLMODE_LISTENONLY |
|
|
CAN_CTRLMODE_ONE_SHOT |
|
|
CAN_CTRLMODE_CC_LEN8_DLC;
|
|
|
|
netdev->netdev_ops = &usb_8dev_netdev_ops;
|
|
netdev->ethtool_ops = &usb_8dev_ethtool_ops;
|
|
|
|
netdev->flags |= IFF_ECHO; /* we support local echo */
|
|
|
|
init_usb_anchor(&priv->rx_submitted);
|
|
|
|
init_usb_anchor(&priv->tx_submitted);
|
|
atomic_set(&priv->active_tx_urbs, 0);
|
|
|
|
for (i = 0; i < MAX_TX_URBS; i++)
|
|
priv->tx_contexts[i].echo_index = MAX_TX_URBS;
|
|
|
|
priv->cmd_msg_buffer = devm_kzalloc(&intf->dev, sizeof(struct usb_8dev_cmd_msg),
|
|
GFP_KERNEL);
|
|
if (!priv->cmd_msg_buffer)
|
|
goto cleanup_candev;
|
|
|
|
usb_set_intfdata(intf, priv);
|
|
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
|
|
mutex_init(&priv->usb_8dev_cmd_lock);
|
|
|
|
err = register_candev(netdev);
|
|
if (err) {
|
|
netdev_err(netdev,
|
|
"couldn't register CAN device: %d\n", err);
|
|
goto cleanup_candev;
|
|
}
|
|
|
|
err = usb_8dev_cmd_version(priv, &version);
|
|
if (err) {
|
|
netdev_err(netdev, "can't get firmware version\n");
|
|
goto cleanup_unregister_candev;
|
|
} else {
|
|
netdev_info(netdev,
|
|
"firmware: %d.%d, hardware: %d.%d\n",
|
|
(version>>24) & 0xff, (version>>16) & 0xff,
|
|
(version>>8) & 0xff, version & 0xff);
|
|
}
|
|
|
|
return 0;
|
|
|
|
cleanup_unregister_candev:
|
|
unregister_netdev(priv->netdev);
|
|
|
|
cleanup_candev:
|
|
free_candev(netdev);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
/* Called by the usb core when driver is unloaded or device is removed */
|
|
static void usb_8dev_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct usb_8dev_priv *priv = usb_get_intfdata(intf);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
if (priv) {
|
|
netdev_info(priv->netdev, "device disconnected\n");
|
|
|
|
unregister_netdev(priv->netdev);
|
|
unlink_all_urbs(priv);
|
|
free_candev(priv->netdev);
|
|
}
|
|
|
|
}
|
|
|
|
static struct usb_driver usb_8dev_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = usb_8dev_probe,
|
|
.disconnect = usb_8dev_disconnect,
|
|
.id_table = usb_8dev_table,
|
|
};
|
|
|
|
module_usb_driver(usb_8dev_driver);
|
|
|
|
MODULE_AUTHOR("Bernd Krumboeck <krumboeck@universalnet.at>");
|
|
MODULE_DESCRIPTION("CAN driver for 8 devices USB2CAN interfaces");
|
|
MODULE_LICENSE("GPL v2");
|