689 lines
18 KiB
C
689 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Device driver for the HMC5843 multi-chip module designed
|
|
* for low field magnetic sensing.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments
|
|
*
|
|
* Author: Shubhrajyoti Datta <shubhrajyoti@ti.com>
|
|
* Acknowledgment: Jonathan Cameron <jic23@kernel.org> for valuable inputs.
|
|
* Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>.
|
|
* Split to multiple files by Josef Gajdusek <atx@atx.name> - 2014
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "hmc5843.h"
|
|
|
|
/*
|
|
* Range gain settings in (+-)Ga
|
|
* Beware: HMC5843 and HMC5883 have different recommended sensor field
|
|
* ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively
|
|
*/
|
|
#define HMC5843_RANGE_GAIN_OFFSET 0x05
|
|
#define HMC5843_RANGE_GAIN_DEFAULT 0x01
|
|
#define HMC5843_RANGE_GAIN_MASK 0xe0
|
|
|
|
/* Device status */
|
|
#define HMC5843_DATA_READY 0x01
|
|
#define HMC5843_DATA_OUTPUT_LOCK 0x02
|
|
|
|
/* Mode register configuration */
|
|
#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00
|
|
#define HMC5843_MODE_CONVERSION_SINGLE 0x01
|
|
#define HMC5843_MODE_IDLE 0x02
|
|
#define HMC5843_MODE_SLEEP 0x03
|
|
#define HMC5843_MODE_MASK 0x03
|
|
|
|
/*
|
|
* HMC5843: Minimum data output rate
|
|
* HMC5883: Typical data output rate
|
|
*/
|
|
#define HMC5843_RATE_OFFSET 0x02
|
|
#define HMC5843_RATE_DEFAULT 0x04
|
|
#define HMC5843_RATE_MASK 0x1c
|
|
|
|
/* Device measurement configuration */
|
|
#define HMC5843_MEAS_CONF_NORMAL 0x00
|
|
#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01
|
|
#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02
|
|
#define HMC5843_MEAS_CONF_MASK 0x03
|
|
|
|
/*
|
|
* API for setting the measurement configuration to
|
|
* Normal, Positive bias and Negative bias
|
|
*
|
|
* From the datasheet:
|
|
* 0 - Normal measurement configuration (default): In normal measurement
|
|
* configuration the device follows normal measurement flow. Pins BP
|
|
* and BN are left floating and high impedance.
|
|
*
|
|
* 1 - Positive bias configuration: In positive bias configuration, a
|
|
* positive current is forced across the resistive load on pins BP
|
|
* and BN.
|
|
*
|
|
* 2 - Negative bias configuration. In negative bias configuration, a
|
|
* negative current is forced across the resistive load on pins BP
|
|
* and BN.
|
|
*
|
|
* 3 - Only available on HMC5983. Magnetic sensor is disabled.
|
|
* Temperature sensor is enabled.
|
|
*/
|
|
|
|
static const char *const hmc5843_meas_conf_modes[] = {"normal", "positivebias",
|
|
"negativebias"};
|
|
|
|
static const char *const hmc5983_meas_conf_modes[] = {"normal", "positivebias",
|
|
"negativebias",
|
|
"disabled"};
|
|
/* Scaling factors: 10000000/Gain */
|
|
static const int hmc5843_regval_to_nanoscale[] = {
|
|
6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714
|
|
};
|
|
|
|
static const int hmc5883_regval_to_nanoscale[] = {
|
|
7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662
|
|
};
|
|
|
|
static const int hmc5883l_regval_to_nanoscale[] = {
|
|
7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478
|
|
};
|
|
|
|
/*
|
|
* From the datasheet:
|
|
* Value | HMC5843 | HMC5883/HMC5883L
|
|
* | Data output rate (Hz) | Data output rate (Hz)
|
|
* 0 | 0.5 | 0.75
|
|
* 1 | 1 | 1.5
|
|
* 2 | 2 | 3
|
|
* 3 | 5 | 7.5
|
|
* 4 | 10 (default) | 15
|
|
* 5 | 20 | 30
|
|
* 6 | 50 | 75
|
|
* 7 | Not used | Not used
|
|
*/
|
|
static const int hmc5843_regval_to_samp_freq[][2] = {
|
|
{0, 500000}, {1, 0}, {2, 0}, {5, 0}, {10, 0}, {20, 0}, {50, 0}
|
|
};
|
|
|
|
static const int hmc5883_regval_to_samp_freq[][2] = {
|
|
{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
|
|
{75, 0}
|
|
};
|
|
|
|
static const int hmc5983_regval_to_samp_freq[][2] = {
|
|
{0, 750000}, {1, 500000}, {3, 0}, {7, 500000}, {15, 0}, {30, 0},
|
|
{75, 0}, {220, 0}
|
|
};
|
|
|
|
/* Describe chip variants */
|
|
struct hmc5843_chip_info {
|
|
const struct iio_chan_spec *channels;
|
|
const int (*regval_to_samp_freq)[2];
|
|
const int n_regval_to_samp_freq;
|
|
const int *regval_to_nanoscale;
|
|
const int n_regval_to_nanoscale;
|
|
};
|
|
|
|
/* The lower two bits contain the current conversion mode */
|
|
static s32 hmc5843_set_mode(struct hmc5843_data *data, u8 operating_mode)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_update_bits(data->regmap, HMC5843_MODE_REG,
|
|
HMC5843_MODE_MASK, operating_mode);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hmc5843_wait_measurement(struct hmc5843_data *data)
|
|
{
|
|
int tries = 150;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
while (tries-- > 0) {
|
|
ret = regmap_read(data->regmap, HMC5843_STATUS_REG, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (val & HMC5843_DATA_READY)
|
|
break;
|
|
msleep(20);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
dev_err(data->dev, "data not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Return the measurement value from the specified channel */
|
|
static int hmc5843_read_measurement(struct hmc5843_data *data,
|
|
int idx, int *val)
|
|
{
|
|
__be16 values[3];
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = hmc5843_wait_measurement(data);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS,
|
|
values, sizeof(values));
|
|
mutex_unlock(&data->lock);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = sign_extend32(be16_to_cpu(values[idx]), 15);
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int hmc5843_set_meas_conf(struct hmc5843_data *data, u8 meas_conf)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A,
|
|
HMC5843_MEAS_CONF_MASK, meas_conf);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static
|
|
int hmc5843_show_measurement_configuration(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val & HMC5843_MEAS_CONF_MASK;
|
|
}
|
|
|
|
static
|
|
int hmc5843_set_measurement_configuration(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
unsigned int meas_conf)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
|
|
return hmc5843_set_meas_conf(data, meas_conf);
|
|
}
|
|
|
|
static const struct iio_mount_matrix *
|
|
hmc5843_get_mount_matrix(const struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
|
|
return &data->orientation;
|
|
}
|
|
|
|
static const struct iio_enum hmc5843_meas_conf_enum = {
|
|
.items = hmc5843_meas_conf_modes,
|
|
.num_items = ARRAY_SIZE(hmc5843_meas_conf_modes),
|
|
.get = hmc5843_show_measurement_configuration,
|
|
.set = hmc5843_set_measurement_configuration,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info hmc5843_ext_info[] = {
|
|
IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5843_meas_conf_enum),
|
|
IIO_ENUM_AVAILABLE("meas_conf", IIO_SHARED_BY_TYPE, &hmc5843_meas_conf_enum),
|
|
IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix),
|
|
{ }
|
|
};
|
|
|
|
static const struct iio_enum hmc5983_meas_conf_enum = {
|
|
.items = hmc5983_meas_conf_modes,
|
|
.num_items = ARRAY_SIZE(hmc5983_meas_conf_modes),
|
|
.get = hmc5843_show_measurement_configuration,
|
|
.set = hmc5843_set_measurement_configuration,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info hmc5983_ext_info[] = {
|
|
IIO_ENUM("meas_conf", IIO_SHARED_BY_TYPE, &hmc5983_meas_conf_enum),
|
|
IIO_ENUM_AVAILABLE("meas_conf", IIO_SHARED_BY_TYPE, &hmc5983_meas_conf_enum),
|
|
IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, hmc5843_get_mount_matrix),
|
|
{ }
|
|
};
|
|
|
|
static
|
|
ssize_t hmc5843_show_samp_freq_avail(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
|
|
size_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len,
|
|
"%d.%d ", data->variant->regval_to_samp_freq[i][0],
|
|
data->variant->regval_to_samp_freq[i][1]);
|
|
|
|
/* replace trailing space by newline */
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_samp_freq_avail);
|
|
|
|
static int hmc5843_set_samp_freq(struct hmc5843_data *data, u8 rate)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_A,
|
|
HMC5843_RATE_MASK,
|
|
rate << HMC5843_RATE_OFFSET);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hmc5843_get_samp_freq_index(struct hmc5843_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < data->variant->n_regval_to_samp_freq; i++)
|
|
if (val == data->variant->regval_to_samp_freq[i][0] &&
|
|
val2 == data->variant->regval_to_samp_freq[i][1])
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int hmc5843_set_range_gain(struct hmc5843_data *data, u8 range)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_update_bits(data->regmap, HMC5843_CONFIG_REG_B,
|
|
HMC5843_RANGE_GAIN_MASK,
|
|
range << HMC5843_RANGE_GAIN_OFFSET);
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t hmc5843_show_scale_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(dev_to_iio_dev(dev));
|
|
|
|
size_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len,
|
|
"0.%09d ", data->variant->regval_to_nanoscale[i]);
|
|
|
|
/* replace trailing space by newline */
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(scale_available, S_IRUGO,
|
|
hmc5843_show_scale_avail, NULL, 0);
|
|
|
|
static int hmc5843_get_scale_index(struct hmc5843_data *data, int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < data->variant->n_regval_to_nanoscale; i++)
|
|
if (val2 == data->variant->regval_to_nanoscale[i])
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int hmc5843_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
unsigned int rval;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
return hmc5843_read_measurement(data, chan->scan_index, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_B, &rval);
|
|
if (ret < 0)
|
|
return ret;
|
|
rval >>= HMC5843_RANGE_GAIN_OFFSET;
|
|
*val = 0;
|
|
*val2 = data->variant->regval_to_nanoscale[rval];
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = regmap_read(data->regmap, HMC5843_CONFIG_REG_A, &rval);
|
|
if (ret < 0)
|
|
return ret;
|
|
rval >>= HMC5843_RATE_OFFSET;
|
|
*val = data->variant->regval_to_samp_freq[rval][0];
|
|
*val2 = data->variant->regval_to_samp_freq[rval][1];
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int hmc5843_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
int rate, range;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
rate = hmc5843_get_samp_freq_index(data, val, val2);
|
|
if (rate < 0)
|
|
return -EINVAL;
|
|
|
|
return hmc5843_set_samp_freq(data, rate);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
range = hmc5843_get_scale_index(data, val, val2);
|
|
if (range < 0)
|
|
return -EINVAL;
|
|
|
|
return hmc5843_set_range_gain(data, range);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int hmc5843_write_raw_get_fmt(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
long mask)
|
|
{
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t hmc5843_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct hmc5843_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = hmc5843_wait_measurement(data);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->lock);
|
|
goto done;
|
|
}
|
|
|
|
ret = regmap_bulk_read(data->regmap, HMC5843_DATA_OUT_MSB_REGS,
|
|
data->scan.chans, sizeof(data->scan.chans));
|
|
|
|
mutex_unlock(&data->lock);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define HMC5843_CHANNEL(axis, idx) \
|
|
{ \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.ext_info = hmc5843_ext_info, \
|
|
}
|
|
|
|
#define HMC5983_CHANNEL(axis, idx) \
|
|
{ \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = idx, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.ext_info = hmc5983_ext_info, \
|
|
}
|
|
|
|
static const struct iio_chan_spec hmc5843_channels[] = {
|
|
HMC5843_CHANNEL(X, 0),
|
|
HMC5843_CHANNEL(Y, 1),
|
|
HMC5843_CHANNEL(Z, 2),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
/* Beware: Y and Z are exchanged on HMC5883 and 5983 */
|
|
static const struct iio_chan_spec hmc5883_channels[] = {
|
|
HMC5843_CHANNEL(X, 0),
|
|
HMC5843_CHANNEL(Z, 1),
|
|
HMC5843_CHANNEL(Y, 2),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static const struct iio_chan_spec hmc5983_channels[] = {
|
|
HMC5983_CHANNEL(X, 0),
|
|
HMC5983_CHANNEL(Z, 1),
|
|
HMC5983_CHANNEL(Y, 2),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static struct attribute *hmc5843_attributes[] = {
|
|
&iio_dev_attr_scale_available.dev_attr.attr,
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group hmc5843_group = {
|
|
.attrs = hmc5843_attributes,
|
|
};
|
|
|
|
static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = {
|
|
[HMC5843_ID] = {
|
|
.channels = hmc5843_channels,
|
|
.regval_to_samp_freq = hmc5843_regval_to_samp_freq,
|
|
.n_regval_to_samp_freq =
|
|
ARRAY_SIZE(hmc5843_regval_to_samp_freq),
|
|
.regval_to_nanoscale = hmc5843_regval_to_nanoscale,
|
|
.n_regval_to_nanoscale =
|
|
ARRAY_SIZE(hmc5843_regval_to_nanoscale),
|
|
},
|
|
[HMC5883_ID] = {
|
|
.channels = hmc5883_channels,
|
|
.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
|
|
.n_regval_to_samp_freq =
|
|
ARRAY_SIZE(hmc5883_regval_to_samp_freq),
|
|
.regval_to_nanoscale = hmc5883_regval_to_nanoscale,
|
|
.n_regval_to_nanoscale =
|
|
ARRAY_SIZE(hmc5883_regval_to_nanoscale),
|
|
},
|
|
[HMC5883L_ID] = {
|
|
.channels = hmc5883_channels,
|
|
.regval_to_samp_freq = hmc5883_regval_to_samp_freq,
|
|
.n_regval_to_samp_freq =
|
|
ARRAY_SIZE(hmc5883_regval_to_samp_freq),
|
|
.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
|
|
.n_regval_to_nanoscale =
|
|
ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
|
|
},
|
|
[HMC5983_ID] = {
|
|
.channels = hmc5983_channels,
|
|
.regval_to_samp_freq = hmc5983_regval_to_samp_freq,
|
|
.n_regval_to_samp_freq =
|
|
ARRAY_SIZE(hmc5983_regval_to_samp_freq),
|
|
.regval_to_nanoscale = hmc5883l_regval_to_nanoscale,
|
|
.n_regval_to_nanoscale =
|
|
ARRAY_SIZE(hmc5883l_regval_to_nanoscale),
|
|
}
|
|
};
|
|
|
|
static int hmc5843_init(struct hmc5843_data *data)
|
|
{
|
|
int ret;
|
|
u8 id[3];
|
|
|
|
ret = regmap_bulk_read(data->regmap, HMC5843_ID_REG,
|
|
id, ARRAY_SIZE(id));
|
|
if (ret < 0)
|
|
return ret;
|
|
if (id[0] != 'H' || id[1] != '4' || id[2] != '3') {
|
|
dev_err(data->dev, "no HMC5843/5883/5883L/5983 sensor\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = hmc5843_set_meas_conf(data, HMC5843_MEAS_CONF_NORMAL);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = hmc5843_set_samp_freq(data, HMC5843_RATE_DEFAULT);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = hmc5843_set_range_gain(data, HMC5843_RANGE_GAIN_DEFAULT);
|
|
if (ret < 0)
|
|
return ret;
|
|
return hmc5843_set_mode(data, HMC5843_MODE_CONVERSION_CONTINUOUS);
|
|
}
|
|
|
|
static const struct iio_info hmc5843_info = {
|
|
.attrs = &hmc5843_group,
|
|
.read_raw = &hmc5843_read_raw,
|
|
.write_raw = &hmc5843_write_raw,
|
|
.write_raw_get_fmt = &hmc5843_write_raw_get_fmt,
|
|
};
|
|
|
|
static const unsigned long hmc5843_scan_masks[] = {0x7, 0};
|
|
|
|
static int hmc5843_common_suspend(struct device *dev)
|
|
{
|
|
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
|
|
HMC5843_MODE_SLEEP);
|
|
}
|
|
|
|
static int hmc5843_common_resume(struct device *dev)
|
|
{
|
|
return hmc5843_set_mode(iio_priv(dev_get_drvdata(dev)),
|
|
HMC5843_MODE_CONVERSION_CONTINUOUS);
|
|
}
|
|
EXPORT_NS_SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_common_suspend,
|
|
hmc5843_common_resume, IIO_HMC5843);
|
|
|
|
int hmc5843_common_probe(struct device *dev, struct regmap *regmap,
|
|
enum hmc5843_ids id, const char *name)
|
|
{
|
|
struct hmc5843_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(dev, indio_dev);
|
|
|
|
/* default settings at probe */
|
|
data = iio_priv(indio_dev);
|
|
data->dev = dev;
|
|
data->regmap = regmap;
|
|
data->variant = &hmc5843_chip_info_tbl[id];
|
|
mutex_init(&data->lock);
|
|
|
|
ret = iio_read_mount_matrix(dev, &data->orientation);
|
|
if (ret)
|
|
return ret;
|
|
|
|
indio_dev->name = name;
|
|
indio_dev->info = &hmc5843_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = data->variant->channels;
|
|
indio_dev->num_channels = 4;
|
|
indio_dev->available_scan_masks = hmc5843_scan_masks;
|
|
|
|
ret = hmc5843_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
hmc5843_trigger_handler, NULL);
|
|
if (ret < 0)
|
|
goto buffer_setup_err;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto buffer_cleanup;
|
|
|
|
return 0;
|
|
|
|
buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
buffer_setup_err:
|
|
hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_NS(hmc5843_common_probe, IIO_HMC5843);
|
|
|
|
void hmc5843_common_remove(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
|
|
/* sleep mode to save power */
|
|
hmc5843_set_mode(iio_priv(indio_dev), HMC5843_MODE_SLEEP);
|
|
}
|
|
EXPORT_SYMBOL_NS(hmc5843_common_remove, IIO_HMC5843);
|
|
|
|
MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com>");
|
|
MODULE_DESCRIPTION("HMC5843/5883/5883L/5983 core driver");
|
|
MODULE_LICENSE("GPL");
|