491 lines
12 KiB
C
491 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* SMBus 2.0 driver for AMD-8111 IO-Hub.
|
|
*
|
|
* Copyright (c) 2002 Vojtech Pavlik
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>");
|
|
MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver");
|
|
|
|
struct amd_smbus {
|
|
struct pci_dev *dev;
|
|
struct i2c_adapter adapter;
|
|
int base;
|
|
int size;
|
|
};
|
|
|
|
static struct pci_driver amd8111_driver;
|
|
|
|
/*
|
|
* AMD PCI control registers definitions.
|
|
*/
|
|
|
|
#define AMD_PCI_MISC 0x48
|
|
|
|
#define AMD_PCI_MISC_SCI 0x04 /* deliver SCI */
|
|
#define AMD_PCI_MISC_INT 0x02 /* deliver PCI IRQ */
|
|
#define AMD_PCI_MISC_SPEEDUP 0x01 /* 16x clock speedup */
|
|
|
|
/*
|
|
* ACPI 2.0 chapter 13 PCI interface definitions.
|
|
*/
|
|
|
|
#define AMD_EC_DATA 0x00 /* data register */
|
|
#define AMD_EC_SC 0x04 /* status of controller */
|
|
#define AMD_EC_CMD 0x04 /* command register */
|
|
#define AMD_EC_ICR 0x08 /* interrupt control register */
|
|
|
|
#define AMD_EC_SC_SMI 0x04 /* smi event pending */
|
|
#define AMD_EC_SC_SCI 0x02 /* sci event pending */
|
|
#define AMD_EC_SC_BURST 0x01 /* burst mode enabled */
|
|
#define AMD_EC_SC_CMD 0x08 /* byte in data reg is command */
|
|
#define AMD_EC_SC_IBF 0x02 /* data ready for embedded controller */
|
|
#define AMD_EC_SC_OBF 0x01 /* data ready for host */
|
|
|
|
#define AMD_EC_CMD_RD 0x80 /* read EC */
|
|
#define AMD_EC_CMD_WR 0x81 /* write EC */
|
|
#define AMD_EC_CMD_BE 0x82 /* enable burst mode */
|
|
#define AMD_EC_CMD_BD 0x83 /* disable burst mode */
|
|
#define AMD_EC_CMD_QR 0x84 /* query EC */
|
|
|
|
/*
|
|
* ACPI 2.0 chapter 13 access of registers of the EC
|
|
*/
|
|
|
|
static int amd_ec_wait_write(struct amd_smbus *smbus)
|
|
{
|
|
int timeout = 500;
|
|
|
|
while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout)
|
|
udelay(1);
|
|
|
|
if (!timeout) {
|
|
dev_warn(&smbus->dev->dev,
|
|
"Timeout while waiting for IBF to clear\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_ec_wait_read(struct amd_smbus *smbus)
|
|
{
|
|
int timeout = 500;
|
|
|
|
while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout)
|
|
udelay(1);
|
|
|
|
if (!timeout) {
|
|
dev_warn(&smbus->dev->dev,
|
|
"Timeout while waiting for OBF to set\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
|
|
unsigned char *data)
|
|
{
|
|
int status;
|
|
|
|
status = amd_ec_wait_write(smbus);
|
|
if (status)
|
|
return status;
|
|
outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD);
|
|
|
|
status = amd_ec_wait_write(smbus);
|
|
if (status)
|
|
return status;
|
|
outb(address, smbus->base + AMD_EC_DATA);
|
|
|
|
status = amd_ec_wait_read(smbus);
|
|
if (status)
|
|
return status;
|
|
*data = inb(smbus->base + AMD_EC_DATA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
|
|
unsigned char data)
|
|
{
|
|
int status;
|
|
|
|
status = amd_ec_wait_write(smbus);
|
|
if (status)
|
|
return status;
|
|
outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD);
|
|
|
|
status = amd_ec_wait_write(smbus);
|
|
if (status)
|
|
return status;
|
|
outb(address, smbus->base + AMD_EC_DATA);
|
|
|
|
status = amd_ec_wait_write(smbus);
|
|
if (status)
|
|
return status;
|
|
outb(data, smbus->base + AMD_EC_DATA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* ACPI 2.0 chapter 13 SMBus 2.0 EC register model
|
|
*/
|
|
|
|
#define AMD_SMB_PRTCL 0x00 /* protocol, PEC */
|
|
#define AMD_SMB_STS 0x01 /* status */
|
|
#define AMD_SMB_ADDR 0x02 /* address */
|
|
#define AMD_SMB_CMD 0x03 /* command */
|
|
#define AMD_SMB_DATA 0x04 /* 32 data registers */
|
|
#define AMD_SMB_BCNT 0x24 /* number of data bytes */
|
|
#define AMD_SMB_ALRM_A 0x25 /* alarm address */
|
|
#define AMD_SMB_ALRM_D 0x26 /* 2 bytes alarm data */
|
|
|
|
#define AMD_SMB_STS_DONE 0x80
|
|
#define AMD_SMB_STS_ALRM 0x40
|
|
#define AMD_SMB_STS_RES 0x20
|
|
#define AMD_SMB_STS_STATUS 0x1f
|
|
|
|
#define AMD_SMB_STATUS_OK 0x00
|
|
#define AMD_SMB_STATUS_FAIL 0x07
|
|
#define AMD_SMB_STATUS_DNAK 0x10
|
|
#define AMD_SMB_STATUS_DERR 0x11
|
|
#define AMD_SMB_STATUS_CMD_DENY 0x12
|
|
#define AMD_SMB_STATUS_UNKNOWN 0x13
|
|
#define AMD_SMB_STATUS_ACC_DENY 0x17
|
|
#define AMD_SMB_STATUS_TIMEOUT 0x18
|
|
#define AMD_SMB_STATUS_NOTSUP 0x19
|
|
#define AMD_SMB_STATUS_BUSY 0x1A
|
|
#define AMD_SMB_STATUS_PEC 0x1F
|
|
|
|
#define AMD_SMB_PRTCL_WRITE 0x00
|
|
#define AMD_SMB_PRTCL_READ 0x01
|
|
#define AMD_SMB_PRTCL_QUICK 0x02
|
|
#define AMD_SMB_PRTCL_BYTE 0x04
|
|
#define AMD_SMB_PRTCL_BYTE_DATA 0x06
|
|
#define AMD_SMB_PRTCL_WORD_DATA 0x08
|
|
#define AMD_SMB_PRTCL_BLOCK_DATA 0x0a
|
|
#define AMD_SMB_PRTCL_PROC_CALL 0x0c
|
|
#define AMD_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
|
|
#define AMD_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
|
|
#define AMD_SMB_PRTCL_PEC 0x80
|
|
|
|
|
|
static s32 amd8111_access(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write, u8 command, int size,
|
|
union i2c_smbus_data *data)
|
|
{
|
|
struct amd_smbus *smbus = adap->algo_data;
|
|
unsigned char protocol, len, pec, temp[2];
|
|
int i, status;
|
|
|
|
protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ
|
|
: AMD_SMB_PRTCL_WRITE;
|
|
pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
protocol |= AMD_SMB_PRTCL_QUICK;
|
|
read_write = I2C_SMBUS_WRITE;
|
|
break;
|
|
|
|
case I2C_SMBUS_BYTE:
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD,
|
|
command);
|
|
if (status)
|
|
return status;
|
|
}
|
|
protocol |= AMD_SMB_PRTCL_BYTE;
|
|
break;
|
|
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA,
|
|
data->byte);
|
|
if (status)
|
|
return status;
|
|
}
|
|
protocol |= AMD_SMB_PRTCL_BYTE_DATA;
|
|
break;
|
|
|
|
case I2C_SMBUS_WORD_DATA:
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA,
|
|
data->word & 0xff);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
|
|
data->word >> 8);
|
|
if (status)
|
|
return status;
|
|
}
|
|
protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
|
|
break;
|
|
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
len = min_t(u8, data->block[0],
|
|
I2C_SMBUS_BLOCK_MAX);
|
|
status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
|
|
if (status)
|
|
return status;
|
|
for (i = 0; i < len; i++) {
|
|
status =
|
|
amd_ec_write(smbus, AMD_SMB_DATA + i,
|
|
data->block[i + 1]);
|
|
if (status)
|
|
return status;
|
|
}
|
|
}
|
|
protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
|
|
break;
|
|
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
len = min_t(u8, data->block[0],
|
|
I2C_SMBUS_BLOCK_MAX);
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
|
|
if (status)
|
|
return status;
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
for (i = 0; i < len; i++) {
|
|
status =
|
|
amd_ec_write(smbus, AMD_SMB_DATA + i,
|
|
data->block[i + 1]);
|
|
if (status)
|
|
return status;
|
|
}
|
|
protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
|
|
break;
|
|
|
|
case I2C_SMBUS_PROC_CALL:
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA,
|
|
data->word & 0xff);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA + 1,
|
|
data->word >> 8);
|
|
if (status)
|
|
return status;
|
|
protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
|
|
read_write = I2C_SMBUS_READ;
|
|
break;
|
|
|
|
case I2C_SMBUS_BLOCK_PROC_CALL:
|
|
len = min_t(u8, data->block[0],
|
|
I2C_SMBUS_BLOCK_MAX - 1);
|
|
status = amd_ec_write(smbus, AMD_SMB_CMD, command);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_BCNT, len);
|
|
if (status)
|
|
return status;
|
|
for (i = 0; i < len; i++) {
|
|
status = amd_ec_write(smbus, AMD_SMB_DATA + i,
|
|
data->block[i + 1]);
|
|
if (status)
|
|
return status;
|
|
}
|
|
protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
|
|
read_write = I2C_SMBUS_READ;
|
|
break;
|
|
|
|
default:
|
|
dev_warn(&adap->dev, "Unsupported transaction %d\n", size);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
status = amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_write(smbus, AMD_SMB_PRTCL, protocol);
|
|
if (status)
|
|
return status;
|
|
|
|
status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
|
|
if (status)
|
|
return status;
|
|
|
|
if (~temp[0] & AMD_SMB_STS_DONE) {
|
|
udelay(500);
|
|
status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
if (~temp[0] & AMD_SMB_STS_DONE) {
|
|
msleep(1);
|
|
status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0);
|
|
if (status)
|
|
return status;
|
|
}
|
|
|
|
if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS))
|
|
return -EIO;
|
|
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
return 0;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_BYTE:
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
status = amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
|
|
if (status)
|
|
return status;
|
|
break;
|
|
|
|
case I2C_SMBUS_WORD_DATA:
|
|
case I2C_SMBUS_PROC_CALL:
|
|
status = amd_ec_read(smbus, AMD_SMB_DATA, temp + 0);
|
|
if (status)
|
|
return status;
|
|
status = amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1);
|
|
if (status)
|
|
return status;
|
|
data->word = (temp[1] << 8) | temp[0];
|
|
break;
|
|
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
case I2C_SMBUS_BLOCK_PROC_CALL:
|
|
status = amd_ec_read(smbus, AMD_SMB_BCNT, &len);
|
|
if (status)
|
|
return status;
|
|
len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
|
|
fallthrough;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
for (i = 0; i < len; i++) {
|
|
status = amd_ec_read(smbus, AMD_SMB_DATA + i,
|
|
data->block + i + 1);
|
|
if (status)
|
|
return status;
|
|
}
|
|
data->block[0] = len;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static u32 amd8111_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
|
|
I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
|
|
I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_PEC;
|
|
}
|
|
|
|
static const struct i2c_algorithm smbus_algorithm = {
|
|
.smbus_xfer = amd8111_access,
|
|
.functionality = amd8111_func,
|
|
};
|
|
|
|
|
|
static const struct pci_device_id amd8111_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, amd8111_ids);
|
|
|
|
static int amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct amd_smbus *smbus;
|
|
int error;
|
|
|
|
if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
|
|
return -ENODEV;
|
|
|
|
smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
|
|
if (!smbus)
|
|
return -ENOMEM;
|
|
|
|
smbus->dev = dev;
|
|
smbus->base = pci_resource_start(dev, 0);
|
|
smbus->size = pci_resource_len(dev, 0);
|
|
|
|
error = acpi_check_resource_conflict(&dev->resource[0]);
|
|
if (error) {
|
|
error = -ENODEV;
|
|
goto out_kfree;
|
|
}
|
|
|
|
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
|
|
error = -EBUSY;
|
|
goto out_kfree;
|
|
}
|
|
|
|
smbus->adapter.owner = THIS_MODULE;
|
|
snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
|
|
"SMBus2 AMD8111 adapter at %04x", smbus->base);
|
|
smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
smbus->adapter.algo = &smbus_algorithm;
|
|
smbus->adapter.algo_data = smbus;
|
|
|
|
/* set up the sysfs linkage to our parent device */
|
|
smbus->adapter.dev.parent = &dev->dev;
|
|
|
|
pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0);
|
|
error = i2c_add_adapter(&smbus->adapter);
|
|
if (error)
|
|
goto out_release_region;
|
|
|
|
pci_set_drvdata(dev, smbus);
|
|
return 0;
|
|
|
|
out_release_region:
|
|
release_region(smbus->base, smbus->size);
|
|
out_kfree:
|
|
kfree(smbus);
|
|
return error;
|
|
}
|
|
|
|
static void amd8111_remove(struct pci_dev *dev)
|
|
{
|
|
struct amd_smbus *smbus = pci_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&smbus->adapter);
|
|
release_region(smbus->base, smbus->size);
|
|
kfree(smbus);
|
|
}
|
|
|
|
static struct pci_driver amd8111_driver = {
|
|
.name = "amd8111_smbus2",
|
|
.id_table = amd8111_ids,
|
|
.probe = amd8111_probe,
|
|
.remove = amd8111_remove,
|
|
};
|
|
|
|
module_pci_driver(amd8111_driver);
|