1604 lines
47 KiB
C
1604 lines
47 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* HID driver for Sony DualSense(TM) controller.
|
|
*
|
|
* Copyright (c) 2020 Sony Interactive Entertainment
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/device.h>
|
|
#include <linux/hid.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/led-class-multicolor.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "hid-ids.h"
|
|
|
|
/* List of connected playstation devices. */
|
|
static DEFINE_MUTEX(ps_devices_lock);
|
|
static LIST_HEAD(ps_devices_list);
|
|
|
|
static DEFINE_IDA(ps_player_id_allocator);
|
|
|
|
#define HID_PLAYSTATION_VERSION_PATCH 0x8000
|
|
|
|
/* Base class for playstation devices. */
|
|
struct ps_device {
|
|
struct list_head list;
|
|
struct hid_device *hdev;
|
|
spinlock_t lock;
|
|
|
|
uint32_t player_id;
|
|
|
|
struct power_supply_desc battery_desc;
|
|
struct power_supply *battery;
|
|
uint8_t battery_capacity;
|
|
int battery_status;
|
|
|
|
const char *input_dev_name; /* Name of primary input device. */
|
|
uint8_t mac_address[6]; /* Note: stored in little endian order. */
|
|
uint32_t hw_version;
|
|
uint32_t fw_version;
|
|
|
|
int (*parse_report)(struct ps_device *dev, struct hid_report *report, u8 *data, int size);
|
|
void (*remove)(struct ps_device *dev);
|
|
};
|
|
|
|
/* Calibration data for playstation motion sensors. */
|
|
struct ps_calibration_data {
|
|
int abs_code;
|
|
short bias;
|
|
int sens_numer;
|
|
int sens_denom;
|
|
};
|
|
|
|
struct ps_led_info {
|
|
const char *name;
|
|
const char *color;
|
|
enum led_brightness (*brightness_get)(struct led_classdev *cdev);
|
|
int (*brightness_set)(struct led_classdev *cdev, enum led_brightness);
|
|
};
|
|
|
|
/* Seed values for DualShock4 / DualSense CRC32 for different report types. */
|
|
#define PS_INPUT_CRC32_SEED 0xA1
|
|
#define PS_OUTPUT_CRC32_SEED 0xA2
|
|
#define PS_FEATURE_CRC32_SEED 0xA3
|
|
|
|
#define DS_INPUT_REPORT_USB 0x01
|
|
#define DS_INPUT_REPORT_USB_SIZE 64
|
|
#define DS_INPUT_REPORT_BT 0x31
|
|
#define DS_INPUT_REPORT_BT_SIZE 78
|
|
#define DS_OUTPUT_REPORT_USB 0x02
|
|
#define DS_OUTPUT_REPORT_USB_SIZE 63
|
|
#define DS_OUTPUT_REPORT_BT 0x31
|
|
#define DS_OUTPUT_REPORT_BT_SIZE 78
|
|
|
|
#define DS_FEATURE_REPORT_CALIBRATION 0x05
|
|
#define DS_FEATURE_REPORT_CALIBRATION_SIZE 41
|
|
#define DS_FEATURE_REPORT_PAIRING_INFO 0x09
|
|
#define DS_FEATURE_REPORT_PAIRING_INFO_SIZE 20
|
|
#define DS_FEATURE_REPORT_FIRMWARE_INFO 0x20
|
|
#define DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE 64
|
|
|
|
/* Button masks for DualSense input report. */
|
|
#define DS_BUTTONS0_HAT_SWITCH GENMASK(3, 0)
|
|
#define DS_BUTTONS0_SQUARE BIT(4)
|
|
#define DS_BUTTONS0_CROSS BIT(5)
|
|
#define DS_BUTTONS0_CIRCLE BIT(6)
|
|
#define DS_BUTTONS0_TRIANGLE BIT(7)
|
|
#define DS_BUTTONS1_L1 BIT(0)
|
|
#define DS_BUTTONS1_R1 BIT(1)
|
|
#define DS_BUTTONS1_L2 BIT(2)
|
|
#define DS_BUTTONS1_R2 BIT(3)
|
|
#define DS_BUTTONS1_CREATE BIT(4)
|
|
#define DS_BUTTONS1_OPTIONS BIT(5)
|
|
#define DS_BUTTONS1_L3 BIT(6)
|
|
#define DS_BUTTONS1_R3 BIT(7)
|
|
#define DS_BUTTONS2_PS_HOME BIT(0)
|
|
#define DS_BUTTONS2_TOUCHPAD BIT(1)
|
|
#define DS_BUTTONS2_MIC_MUTE BIT(2)
|
|
|
|
/* Status field of DualSense input report. */
|
|
#define DS_STATUS_BATTERY_CAPACITY GENMASK(3, 0)
|
|
#define DS_STATUS_CHARGING GENMASK(7, 4)
|
|
#define DS_STATUS_CHARGING_SHIFT 4
|
|
|
|
/* Feature version from DualSense Firmware Info report. */
|
|
#define DS_FEATURE_VERSION(major, minor) ((major & 0xff) << 8 | (minor & 0xff))
|
|
|
|
/*
|
|
* Status of a DualSense touch point contact.
|
|
* Contact IDs, with highest bit set are 'inactive'
|
|
* and any associated data is then invalid.
|
|
*/
|
|
#define DS_TOUCH_POINT_INACTIVE BIT(7)
|
|
|
|
/* Magic value required in tag field of Bluetooth output report. */
|
|
#define DS_OUTPUT_TAG 0x10
|
|
/* Flags for DualSense output report. */
|
|
#define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0)
|
|
#define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1)
|
|
#define DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE BIT(0)
|
|
#define DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE BIT(1)
|
|
#define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2)
|
|
#define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3)
|
|
#define DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE BIT(4)
|
|
#define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1)
|
|
#define DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2 BIT(2)
|
|
#define DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE BIT(4)
|
|
#define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1)
|
|
|
|
/* DualSense hardware limits */
|
|
#define DS_ACC_RES_PER_G 8192
|
|
#define DS_ACC_RANGE (4*DS_ACC_RES_PER_G)
|
|
#define DS_GYRO_RES_PER_DEG_S 1024
|
|
#define DS_GYRO_RANGE (2048*DS_GYRO_RES_PER_DEG_S)
|
|
#define DS_TOUCHPAD_WIDTH 1920
|
|
#define DS_TOUCHPAD_HEIGHT 1080
|
|
|
|
struct dualsense {
|
|
struct ps_device base;
|
|
struct input_dev *gamepad;
|
|
struct input_dev *sensors;
|
|
struct input_dev *touchpad;
|
|
|
|
/* Update version is used as a feature/capability version. */
|
|
uint16_t update_version;
|
|
|
|
/* Calibration data for accelerometer and gyroscope. */
|
|
struct ps_calibration_data accel_calib_data[3];
|
|
struct ps_calibration_data gyro_calib_data[3];
|
|
|
|
/* Timestamp for sensor data */
|
|
bool sensor_timestamp_initialized;
|
|
uint32_t prev_sensor_timestamp;
|
|
uint32_t sensor_timestamp_us;
|
|
|
|
/* Compatible rumble state */
|
|
bool use_vibration_v2;
|
|
bool update_rumble;
|
|
uint8_t motor_left;
|
|
uint8_t motor_right;
|
|
|
|
/* RGB lightbar */
|
|
struct led_classdev_mc lightbar;
|
|
bool update_lightbar;
|
|
uint8_t lightbar_red;
|
|
uint8_t lightbar_green;
|
|
uint8_t lightbar_blue;
|
|
|
|
/* Microphone */
|
|
bool update_mic_mute;
|
|
bool mic_muted;
|
|
bool last_btn_mic_state;
|
|
|
|
/* Player leds */
|
|
bool update_player_leds;
|
|
uint8_t player_leds_state;
|
|
struct led_classdev player_leds[5];
|
|
|
|
struct work_struct output_worker;
|
|
bool output_worker_initialized;
|
|
void *output_report_dmabuf;
|
|
uint8_t output_seq; /* Sequence number for output report. */
|
|
};
|
|
|
|
struct dualsense_touch_point {
|
|
uint8_t contact;
|
|
uint8_t x_lo;
|
|
uint8_t x_hi:4, y_lo:4;
|
|
uint8_t y_hi;
|
|
} __packed;
|
|
static_assert(sizeof(struct dualsense_touch_point) == 4);
|
|
|
|
/* Main DualSense input report excluding any BT/USB specific headers. */
|
|
struct dualsense_input_report {
|
|
uint8_t x, y;
|
|
uint8_t rx, ry;
|
|
uint8_t z, rz;
|
|
uint8_t seq_number;
|
|
uint8_t buttons[4];
|
|
uint8_t reserved[4];
|
|
|
|
/* Motion sensors */
|
|
__le16 gyro[3]; /* x, y, z */
|
|
__le16 accel[3]; /* x, y, z */
|
|
__le32 sensor_timestamp;
|
|
uint8_t reserved2;
|
|
|
|
/* Touchpad */
|
|
struct dualsense_touch_point points[2];
|
|
|
|
uint8_t reserved3[12];
|
|
uint8_t status;
|
|
uint8_t reserved4[10];
|
|
} __packed;
|
|
/* Common input report size shared equals the size of the USB report minus 1 byte for ReportID. */
|
|
static_assert(sizeof(struct dualsense_input_report) == DS_INPUT_REPORT_USB_SIZE - 1);
|
|
|
|
/* Common data between DualSense BT/USB main output report. */
|
|
struct dualsense_output_report_common {
|
|
uint8_t valid_flag0;
|
|
uint8_t valid_flag1;
|
|
|
|
/* For DualShock 4 compatibility mode. */
|
|
uint8_t motor_right;
|
|
uint8_t motor_left;
|
|
|
|
/* Audio controls */
|
|
uint8_t reserved[4];
|
|
uint8_t mute_button_led;
|
|
|
|
uint8_t power_save_control;
|
|
uint8_t reserved2[28];
|
|
|
|
/* LEDs and lightbar */
|
|
uint8_t valid_flag2;
|
|
uint8_t reserved3[2];
|
|
uint8_t lightbar_setup;
|
|
uint8_t led_brightness;
|
|
uint8_t player_leds;
|
|
uint8_t lightbar_red;
|
|
uint8_t lightbar_green;
|
|
uint8_t lightbar_blue;
|
|
} __packed;
|
|
static_assert(sizeof(struct dualsense_output_report_common) == 47);
|
|
|
|
struct dualsense_output_report_bt {
|
|
uint8_t report_id; /* 0x31 */
|
|
uint8_t seq_tag;
|
|
uint8_t tag;
|
|
struct dualsense_output_report_common common;
|
|
uint8_t reserved[24];
|
|
__le32 crc32;
|
|
} __packed;
|
|
static_assert(sizeof(struct dualsense_output_report_bt) == DS_OUTPUT_REPORT_BT_SIZE);
|
|
|
|
struct dualsense_output_report_usb {
|
|
uint8_t report_id; /* 0x02 */
|
|
struct dualsense_output_report_common common;
|
|
uint8_t reserved[15];
|
|
} __packed;
|
|
static_assert(sizeof(struct dualsense_output_report_usb) == DS_OUTPUT_REPORT_USB_SIZE);
|
|
|
|
/*
|
|
* The DualSense has a main output report used to control most features. It is
|
|
* largely the same between Bluetooth and USB except for different headers and CRC.
|
|
* This structure hide the differences between the two to simplify sending output reports.
|
|
*/
|
|
struct dualsense_output_report {
|
|
uint8_t *data; /* Start of data */
|
|
uint8_t len; /* Size of output report */
|
|
|
|
/* Points to Bluetooth data payload in case for a Bluetooth report else NULL. */
|
|
struct dualsense_output_report_bt *bt;
|
|
/* Points to USB data payload in case for a USB report else NULL. */
|
|
struct dualsense_output_report_usb *usb;
|
|
/* Points to common section of report, so past any headers. */
|
|
struct dualsense_output_report_common *common;
|
|
};
|
|
|
|
/*
|
|
* Common gamepad buttons across DualShock 3 / 4 and DualSense.
|
|
* Note: for device with a touchpad, touchpad button is not included
|
|
* as it will be part of the touchpad device.
|
|
*/
|
|
static const int ps_gamepad_buttons[] = {
|
|
BTN_WEST, /* Square */
|
|
BTN_NORTH, /* Triangle */
|
|
BTN_EAST, /* Circle */
|
|
BTN_SOUTH, /* Cross */
|
|
BTN_TL, /* L1 */
|
|
BTN_TR, /* R1 */
|
|
BTN_TL2, /* L2 */
|
|
BTN_TR2, /* R2 */
|
|
BTN_SELECT, /* Create (PS5) / Share (PS4) */
|
|
BTN_START, /* Option */
|
|
BTN_THUMBL, /* L3 */
|
|
BTN_THUMBR, /* R3 */
|
|
BTN_MODE, /* PS Home */
|
|
};
|
|
|
|
static const struct {int x; int y; } ps_gamepad_hat_mapping[] = {
|
|
{0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1},
|
|
{0, 0},
|
|
};
|
|
|
|
static inline void dualsense_schedule_work(struct dualsense *ds);
|
|
static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue);
|
|
|
|
/*
|
|
* Add a new ps_device to ps_devices if it doesn't exist.
|
|
* Return error on duplicate device, which can happen if the same
|
|
* device is connected using both Bluetooth and USB.
|
|
*/
|
|
static int ps_devices_list_add(struct ps_device *dev)
|
|
{
|
|
struct ps_device *entry;
|
|
|
|
mutex_lock(&ps_devices_lock);
|
|
list_for_each_entry(entry, &ps_devices_list, list) {
|
|
if (!memcmp(entry->mac_address, dev->mac_address, sizeof(dev->mac_address))) {
|
|
hid_err(dev->hdev, "Duplicate device found for MAC address %pMR.\n",
|
|
dev->mac_address);
|
|
mutex_unlock(&ps_devices_lock);
|
|
return -EEXIST;
|
|
}
|
|
}
|
|
|
|
list_add_tail(&dev->list, &ps_devices_list);
|
|
mutex_unlock(&ps_devices_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int ps_devices_list_remove(struct ps_device *dev)
|
|
{
|
|
mutex_lock(&ps_devices_lock);
|
|
list_del(&dev->list);
|
|
mutex_unlock(&ps_devices_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int ps_device_set_player_id(struct ps_device *dev)
|
|
{
|
|
int ret = ida_alloc(&ps_player_id_allocator, GFP_KERNEL);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev->player_id = ret;
|
|
return 0;
|
|
}
|
|
|
|
static void ps_device_release_player_id(struct ps_device *dev)
|
|
{
|
|
ida_free(&ps_player_id_allocator, dev->player_id);
|
|
|
|
dev->player_id = U32_MAX;
|
|
}
|
|
|
|
static struct input_dev *ps_allocate_input_dev(struct hid_device *hdev, const char *name_suffix)
|
|
{
|
|
struct input_dev *input_dev;
|
|
|
|
input_dev = devm_input_allocate_device(&hdev->dev);
|
|
if (!input_dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
input_dev->id.bustype = hdev->bus;
|
|
input_dev->id.vendor = hdev->vendor;
|
|
input_dev->id.product = hdev->product;
|
|
input_dev->id.version = hdev->version;
|
|
input_dev->uniq = hdev->uniq;
|
|
|
|
if (name_suffix) {
|
|
input_dev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s %s", hdev->name,
|
|
name_suffix);
|
|
if (!input_dev->name)
|
|
return ERR_PTR(-ENOMEM);
|
|
} else {
|
|
input_dev->name = hdev->name;
|
|
}
|
|
|
|
input_set_drvdata(input_dev, hdev);
|
|
|
|
return input_dev;
|
|
}
|
|
|
|
static enum power_supply_property ps_power_supply_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
};
|
|
|
|
static int ps_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct ps_device *dev = power_supply_get_drvdata(psy);
|
|
uint8_t battery_capacity;
|
|
int battery_status;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&dev->lock, flags);
|
|
battery_capacity = dev->battery_capacity;
|
|
battery_status = dev->battery_status;
|
|
spin_unlock_irqrestore(&dev->lock, flags);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
val->intval = battery_status;
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = 1;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
val->intval = battery_capacity;
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ps_device_register_battery(struct ps_device *dev)
|
|
{
|
|
struct power_supply *battery;
|
|
struct power_supply_config battery_cfg = { .drv_data = dev };
|
|
int ret;
|
|
|
|
dev->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY;
|
|
dev->battery_desc.properties = ps_power_supply_props;
|
|
dev->battery_desc.num_properties = ARRAY_SIZE(ps_power_supply_props);
|
|
dev->battery_desc.get_property = ps_battery_get_property;
|
|
dev->battery_desc.name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
|
|
"ps-controller-battery-%pMR", dev->mac_address);
|
|
if (!dev->battery_desc.name)
|
|
return -ENOMEM;
|
|
|
|
battery = devm_power_supply_register(&dev->hdev->dev, &dev->battery_desc, &battery_cfg);
|
|
if (IS_ERR(battery)) {
|
|
ret = PTR_ERR(battery);
|
|
hid_err(dev->hdev, "Unable to register battery device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
dev->battery = battery;
|
|
|
|
ret = power_supply_powers(dev->battery, &dev->hdev->dev);
|
|
if (ret) {
|
|
hid_err(dev->hdev, "Unable to activate battery device: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Compute crc32 of HID data and compare against expected CRC. */
|
|
static bool ps_check_crc32(uint8_t seed, uint8_t *data, size_t len, uint32_t report_crc)
|
|
{
|
|
uint32_t crc;
|
|
|
|
crc = crc32_le(0xFFFFFFFF, &seed, 1);
|
|
crc = ~crc32_le(crc, data, len);
|
|
|
|
return crc == report_crc;
|
|
}
|
|
|
|
static struct input_dev *ps_gamepad_create(struct hid_device *hdev,
|
|
int (*play_effect)(struct input_dev *, void *, struct ff_effect *))
|
|
{
|
|
struct input_dev *gamepad;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
gamepad = ps_allocate_input_dev(hdev, NULL);
|
|
if (IS_ERR(gamepad))
|
|
return ERR_CAST(gamepad);
|
|
|
|
input_set_abs_params(gamepad, ABS_X, 0, 255, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_Y, 0, 255, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_Z, 0, 255, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_RX, 0, 255, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_RY, 0, 255, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_RZ, 0, 255, 0, 0);
|
|
|
|
input_set_abs_params(gamepad, ABS_HAT0X, -1, 1, 0, 0);
|
|
input_set_abs_params(gamepad, ABS_HAT0Y, -1, 1, 0, 0);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ps_gamepad_buttons); i++)
|
|
input_set_capability(gamepad, EV_KEY, ps_gamepad_buttons[i]);
|
|
|
|
#if IS_ENABLED(CONFIG_PLAYSTATION_FF)
|
|
if (play_effect) {
|
|
input_set_capability(gamepad, EV_FF, FF_RUMBLE);
|
|
input_ff_create_memless(gamepad, NULL, play_effect);
|
|
}
|
|
#endif
|
|
|
|
ret = input_register_device(gamepad);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return gamepad;
|
|
}
|
|
|
|
static int ps_get_report(struct hid_device *hdev, uint8_t report_id, uint8_t *buf, size_t size)
|
|
{
|
|
int ret;
|
|
|
|
ret = hid_hw_raw_request(hdev, report_id, buf, size, HID_FEATURE_REPORT,
|
|
HID_REQ_GET_REPORT);
|
|
if (ret < 0) {
|
|
hid_err(hdev, "Failed to retrieve feature with reportID %d: %d\n", report_id, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (ret != size) {
|
|
hid_err(hdev, "Invalid byte count transferred, expected %zu got %d\n", size, ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (buf[0] != report_id) {
|
|
hid_err(hdev, "Invalid reportID received, expected %d got %d\n", report_id, buf[0]);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (hdev->bus == BUS_BLUETOOTH) {
|
|
/* Last 4 bytes contains crc32. */
|
|
uint8_t crc_offset = size - 4;
|
|
uint32_t report_crc = get_unaligned_le32(&buf[crc_offset]);
|
|
|
|
if (!ps_check_crc32(PS_FEATURE_CRC32_SEED, buf, crc_offset, report_crc)) {
|
|
hid_err(hdev, "CRC check failed for reportID=%d\n", report_id);
|
|
return -EILSEQ;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ps_led_register(struct ps_device *ps_dev, struct led_classdev *led,
|
|
const struct ps_led_info *led_info)
|
|
{
|
|
int ret;
|
|
|
|
led->name = devm_kasprintf(&ps_dev->hdev->dev, GFP_KERNEL,
|
|
"%s:%s:%s", ps_dev->input_dev_name, led_info->color, led_info->name);
|
|
|
|
if (!led->name)
|
|
return -ENOMEM;
|
|
|
|
led->brightness = 0;
|
|
led->max_brightness = 1;
|
|
led->flags = LED_CORE_SUSPENDRESUME;
|
|
led->brightness_get = led_info->brightness_get;
|
|
led->brightness_set_blocking = led_info->brightness_set;
|
|
|
|
ret = devm_led_classdev_register(&ps_dev->hdev->dev, led);
|
|
if (ret) {
|
|
hid_err(ps_dev->hdev, "Failed to register LED %s: %d\n", led_info->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Register a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */
|
|
static int ps_lightbar_register(struct ps_device *ps_dev, struct led_classdev_mc *lightbar_mc_dev,
|
|
int (*brightness_set)(struct led_classdev *, enum led_brightness))
|
|
{
|
|
struct hid_device *hdev = ps_dev->hdev;
|
|
struct mc_subled *mc_led_info;
|
|
struct led_classdev *led_cdev;
|
|
int ret;
|
|
|
|
mc_led_info = devm_kmalloc_array(&hdev->dev, 3, sizeof(*mc_led_info),
|
|
GFP_KERNEL | __GFP_ZERO);
|
|
if (!mc_led_info)
|
|
return -ENOMEM;
|
|
|
|
mc_led_info[0].color_index = LED_COLOR_ID_RED;
|
|
mc_led_info[1].color_index = LED_COLOR_ID_GREEN;
|
|
mc_led_info[2].color_index = LED_COLOR_ID_BLUE;
|
|
|
|
lightbar_mc_dev->subled_info = mc_led_info;
|
|
lightbar_mc_dev->num_colors = 3;
|
|
|
|
led_cdev = &lightbar_mc_dev->led_cdev;
|
|
led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s:rgb:indicator",
|
|
ps_dev->input_dev_name);
|
|
if (!led_cdev->name)
|
|
return -ENOMEM;
|
|
led_cdev->brightness = 255;
|
|
led_cdev->max_brightness = 255;
|
|
led_cdev->brightness_set_blocking = brightness_set;
|
|
|
|
ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev);
|
|
if (ret < 0) {
|
|
hid_err(hdev, "Cannot register multicolor LED device\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, int accel_res,
|
|
int gyro_range, int gyro_res)
|
|
{
|
|
struct input_dev *sensors;
|
|
int ret;
|
|
|
|
sensors = ps_allocate_input_dev(hdev, "Motion Sensors");
|
|
if (IS_ERR(sensors))
|
|
return ERR_CAST(sensors);
|
|
|
|
__set_bit(INPUT_PROP_ACCELEROMETER, sensors->propbit);
|
|
__set_bit(EV_MSC, sensors->evbit);
|
|
__set_bit(MSC_TIMESTAMP, sensors->mscbit);
|
|
|
|
/* Accelerometer */
|
|
input_set_abs_params(sensors, ABS_X, -accel_range, accel_range, 16, 0);
|
|
input_set_abs_params(sensors, ABS_Y, -accel_range, accel_range, 16, 0);
|
|
input_set_abs_params(sensors, ABS_Z, -accel_range, accel_range, 16, 0);
|
|
input_abs_set_res(sensors, ABS_X, accel_res);
|
|
input_abs_set_res(sensors, ABS_Y, accel_res);
|
|
input_abs_set_res(sensors, ABS_Z, accel_res);
|
|
|
|
/* Gyroscope */
|
|
input_set_abs_params(sensors, ABS_RX, -gyro_range, gyro_range, 16, 0);
|
|
input_set_abs_params(sensors, ABS_RY, -gyro_range, gyro_range, 16, 0);
|
|
input_set_abs_params(sensors, ABS_RZ, -gyro_range, gyro_range, 16, 0);
|
|
input_abs_set_res(sensors, ABS_RX, gyro_res);
|
|
input_abs_set_res(sensors, ABS_RY, gyro_res);
|
|
input_abs_set_res(sensors, ABS_RZ, gyro_res);
|
|
|
|
ret = input_register_device(sensors);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return sensors;
|
|
}
|
|
|
|
static struct input_dev *ps_touchpad_create(struct hid_device *hdev, int width, int height,
|
|
unsigned int num_contacts)
|
|
{
|
|
struct input_dev *touchpad;
|
|
int ret;
|
|
|
|
touchpad = ps_allocate_input_dev(hdev, "Touchpad");
|
|
if (IS_ERR(touchpad))
|
|
return ERR_CAST(touchpad);
|
|
|
|
/* Map button underneath touchpad to BTN_LEFT. */
|
|
input_set_capability(touchpad, EV_KEY, BTN_LEFT);
|
|
__set_bit(INPUT_PROP_BUTTONPAD, touchpad->propbit);
|
|
|
|
input_set_abs_params(touchpad, ABS_MT_POSITION_X, 0, width - 1, 0, 0);
|
|
input_set_abs_params(touchpad, ABS_MT_POSITION_Y, 0, height - 1, 0, 0);
|
|
|
|
ret = input_mt_init_slots(touchpad, num_contacts, INPUT_MT_POINTER);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
ret = input_register_device(touchpad);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return touchpad;
|
|
}
|
|
|
|
static ssize_t firmware_version_show(struct device *dev,
|
|
struct device_attribute
|
|
*attr, char *buf)
|
|
{
|
|
struct hid_device *hdev = to_hid_device(dev);
|
|
struct ps_device *ps_dev = hid_get_drvdata(hdev);
|
|
|
|
return sysfs_emit(buf, "0x%08x\n", ps_dev->fw_version);
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(firmware_version);
|
|
|
|
static ssize_t hardware_version_show(struct device *dev,
|
|
struct device_attribute
|
|
*attr, char *buf)
|
|
{
|
|
struct hid_device *hdev = to_hid_device(dev);
|
|
struct ps_device *ps_dev = hid_get_drvdata(hdev);
|
|
|
|
return sysfs_emit(buf, "0x%08x\n", ps_dev->hw_version);
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(hardware_version);
|
|
|
|
static struct attribute *ps_device_attrs[] = {
|
|
&dev_attr_firmware_version.attr,
|
|
&dev_attr_hardware_version.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(ps_device);
|
|
|
|
static int dualsense_get_calibration_data(struct dualsense *ds)
|
|
{
|
|
struct hid_device *hdev = ds->base.hdev;
|
|
short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus;
|
|
short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus;
|
|
short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus;
|
|
short gyro_speed_plus, gyro_speed_minus;
|
|
short acc_x_plus, acc_x_minus;
|
|
short acc_y_plus, acc_y_minus;
|
|
short acc_z_plus, acc_z_minus;
|
|
int speed_2x;
|
|
int range_2g;
|
|
int ret = 0;
|
|
int i;
|
|
uint8_t *buf;
|
|
|
|
buf = kzalloc(DS_FEATURE_REPORT_CALIBRATION_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_CALIBRATION, buf,
|
|
DS_FEATURE_REPORT_CALIBRATION_SIZE);
|
|
if (ret) {
|
|
hid_err(ds->base.hdev, "Failed to retrieve DualSense calibration info: %d\n", ret);
|
|
goto err_free;
|
|
}
|
|
|
|
gyro_pitch_bias = get_unaligned_le16(&buf[1]);
|
|
gyro_yaw_bias = get_unaligned_le16(&buf[3]);
|
|
gyro_roll_bias = get_unaligned_le16(&buf[5]);
|
|
gyro_pitch_plus = get_unaligned_le16(&buf[7]);
|
|
gyro_pitch_minus = get_unaligned_le16(&buf[9]);
|
|
gyro_yaw_plus = get_unaligned_le16(&buf[11]);
|
|
gyro_yaw_minus = get_unaligned_le16(&buf[13]);
|
|
gyro_roll_plus = get_unaligned_le16(&buf[15]);
|
|
gyro_roll_minus = get_unaligned_le16(&buf[17]);
|
|
gyro_speed_plus = get_unaligned_le16(&buf[19]);
|
|
gyro_speed_minus = get_unaligned_le16(&buf[21]);
|
|
acc_x_plus = get_unaligned_le16(&buf[23]);
|
|
acc_x_minus = get_unaligned_le16(&buf[25]);
|
|
acc_y_plus = get_unaligned_le16(&buf[27]);
|
|
acc_y_minus = get_unaligned_le16(&buf[29]);
|
|
acc_z_plus = get_unaligned_le16(&buf[31]);
|
|
acc_z_minus = get_unaligned_le16(&buf[33]);
|
|
|
|
/*
|
|
* Set gyroscope calibration and normalization parameters.
|
|
* Data values will be normalized to 1/DS_GYRO_RES_PER_DEG_S degree/s.
|
|
*/
|
|
speed_2x = (gyro_speed_plus + gyro_speed_minus);
|
|
ds->gyro_calib_data[0].abs_code = ABS_RX;
|
|
ds->gyro_calib_data[0].bias = gyro_pitch_bias;
|
|
ds->gyro_calib_data[0].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S;
|
|
ds->gyro_calib_data[0].sens_denom = gyro_pitch_plus - gyro_pitch_minus;
|
|
|
|
ds->gyro_calib_data[1].abs_code = ABS_RY;
|
|
ds->gyro_calib_data[1].bias = gyro_yaw_bias;
|
|
ds->gyro_calib_data[1].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S;
|
|
ds->gyro_calib_data[1].sens_denom = gyro_yaw_plus - gyro_yaw_minus;
|
|
|
|
ds->gyro_calib_data[2].abs_code = ABS_RZ;
|
|
ds->gyro_calib_data[2].bias = gyro_roll_bias;
|
|
ds->gyro_calib_data[2].sens_numer = speed_2x*DS_GYRO_RES_PER_DEG_S;
|
|
ds->gyro_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus;
|
|
|
|
/*
|
|
* Sanity check gyro calibration data. This is needed to prevent crashes
|
|
* during report handling of virtual, clone or broken devices not implementing
|
|
* calibration data properly.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(ds->gyro_calib_data); i++) {
|
|
if (ds->gyro_calib_data[i].sens_denom == 0) {
|
|
hid_warn(hdev, "Invalid gyro calibration data for axis (%d), disabling calibration.",
|
|
ds->gyro_calib_data[i].abs_code);
|
|
ds->gyro_calib_data[i].bias = 0;
|
|
ds->gyro_calib_data[i].sens_numer = DS_GYRO_RANGE;
|
|
ds->gyro_calib_data[i].sens_denom = S16_MAX;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set accelerometer calibration and normalization parameters.
|
|
* Data values will be normalized to 1/DS_ACC_RES_PER_G g.
|
|
*/
|
|
range_2g = acc_x_plus - acc_x_minus;
|
|
ds->accel_calib_data[0].abs_code = ABS_X;
|
|
ds->accel_calib_data[0].bias = acc_x_plus - range_2g / 2;
|
|
ds->accel_calib_data[0].sens_numer = 2*DS_ACC_RES_PER_G;
|
|
ds->accel_calib_data[0].sens_denom = range_2g;
|
|
|
|
range_2g = acc_y_plus - acc_y_minus;
|
|
ds->accel_calib_data[1].abs_code = ABS_Y;
|
|
ds->accel_calib_data[1].bias = acc_y_plus - range_2g / 2;
|
|
ds->accel_calib_data[1].sens_numer = 2*DS_ACC_RES_PER_G;
|
|
ds->accel_calib_data[1].sens_denom = range_2g;
|
|
|
|
range_2g = acc_z_plus - acc_z_minus;
|
|
ds->accel_calib_data[2].abs_code = ABS_Z;
|
|
ds->accel_calib_data[2].bias = acc_z_plus - range_2g / 2;
|
|
ds->accel_calib_data[2].sens_numer = 2*DS_ACC_RES_PER_G;
|
|
ds->accel_calib_data[2].sens_denom = range_2g;
|
|
|
|
/*
|
|
* Sanity check accelerometer calibration data. This is needed to prevent crashes
|
|
* during report handling of virtual, clone or broken devices not implementing calibration
|
|
* data properly.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(ds->accel_calib_data); i++) {
|
|
if (ds->accel_calib_data[i].sens_denom == 0) {
|
|
hid_warn(hdev, "Invalid accelerometer calibration data for axis (%d), disabling calibration.",
|
|
ds->accel_calib_data[i].abs_code);
|
|
ds->accel_calib_data[i].bias = 0;
|
|
ds->accel_calib_data[i].sens_numer = DS_ACC_RANGE;
|
|
ds->accel_calib_data[i].sens_denom = S16_MAX;
|
|
}
|
|
}
|
|
|
|
err_free:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int dualsense_get_firmware_info(struct dualsense *ds)
|
|
{
|
|
uint8_t *buf;
|
|
int ret;
|
|
|
|
buf = kzalloc(DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_FIRMWARE_INFO, buf,
|
|
DS_FEATURE_REPORT_FIRMWARE_INFO_SIZE);
|
|
if (ret) {
|
|
hid_err(ds->base.hdev, "Failed to retrieve DualSense firmware info: %d\n", ret);
|
|
goto err_free;
|
|
}
|
|
|
|
ds->base.hw_version = get_unaligned_le32(&buf[24]);
|
|
ds->base.fw_version = get_unaligned_le32(&buf[28]);
|
|
|
|
/* Update version is some kind of feature version. It is distinct from
|
|
* the firmware version as there can be many different variations of a
|
|
* controller over time with the same physical shell, but with different
|
|
* PCBs and other internal changes. The update version (internal name) is
|
|
* used as a means to detect what features are available and change behavior.
|
|
* Note: the version is different between DualSense and DualSense Edge.
|
|
*/
|
|
ds->update_version = get_unaligned_le16(&buf[44]);
|
|
|
|
err_free:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int dualsense_get_mac_address(struct dualsense *ds)
|
|
{
|
|
uint8_t *buf;
|
|
int ret = 0;
|
|
|
|
buf = kzalloc(DS_FEATURE_REPORT_PAIRING_INFO_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
ret = ps_get_report(ds->base.hdev, DS_FEATURE_REPORT_PAIRING_INFO, buf,
|
|
DS_FEATURE_REPORT_PAIRING_INFO_SIZE);
|
|
if (ret) {
|
|
hid_err(ds->base.hdev, "Failed to retrieve DualSense pairing info: %d\n", ret);
|
|
goto err_free;
|
|
}
|
|
|
|
memcpy(ds->base.mac_address, &buf[1], sizeof(ds->base.mac_address));
|
|
|
|
err_free:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
static int dualsense_lightbar_set_brightness(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
|
|
struct dualsense *ds = container_of(mc_cdev, struct dualsense, lightbar);
|
|
uint8_t red, green, blue;
|
|
|
|
led_mc_calc_color_components(mc_cdev, brightness);
|
|
red = mc_cdev->subled_info[0].brightness;
|
|
green = mc_cdev->subled_info[1].brightness;
|
|
blue = mc_cdev->subled_info[2].brightness;
|
|
|
|
dualsense_set_lightbar(ds, red, green, blue);
|
|
return 0;
|
|
}
|
|
|
|
static enum led_brightness dualsense_player_led_get_brightness(struct led_classdev *led)
|
|
{
|
|
struct hid_device *hdev = to_hid_device(led->dev->parent);
|
|
struct dualsense *ds = hid_get_drvdata(hdev);
|
|
|
|
return !!(ds->player_leds_state & BIT(led - ds->player_leds));
|
|
}
|
|
|
|
static int dualsense_player_led_set_brightness(struct led_classdev *led, enum led_brightness value)
|
|
{
|
|
struct hid_device *hdev = to_hid_device(led->dev->parent);
|
|
struct dualsense *ds = hid_get_drvdata(hdev);
|
|
unsigned long flags;
|
|
unsigned int led_index;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
|
|
led_index = led - ds->player_leds;
|
|
if (value == LED_OFF)
|
|
ds->player_leds_state &= ~BIT(led_index);
|
|
else
|
|
ds->player_leds_state |= BIT(led_index);
|
|
|
|
ds->update_player_leds = true;
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
|
|
dualsense_schedule_work(ds);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dualsense_init_output_report(struct dualsense *ds, struct dualsense_output_report *rp,
|
|
void *buf)
|
|
{
|
|
struct hid_device *hdev = ds->base.hdev;
|
|
|
|
if (hdev->bus == BUS_BLUETOOTH) {
|
|
struct dualsense_output_report_bt *bt = buf;
|
|
|
|
memset(bt, 0, sizeof(*bt));
|
|
bt->report_id = DS_OUTPUT_REPORT_BT;
|
|
bt->tag = DS_OUTPUT_TAG; /* Tag must be set. Exact meaning is unclear. */
|
|
|
|
/*
|
|
* Highest 4-bit is a sequence number, which needs to be increased
|
|
* every report. Lowest 4-bit is tag and can be zero for now.
|
|
*/
|
|
bt->seq_tag = (ds->output_seq << 4) | 0x0;
|
|
if (++ds->output_seq == 16)
|
|
ds->output_seq = 0;
|
|
|
|
rp->data = buf;
|
|
rp->len = sizeof(*bt);
|
|
rp->bt = bt;
|
|
rp->usb = NULL;
|
|
rp->common = &bt->common;
|
|
} else { /* USB */
|
|
struct dualsense_output_report_usb *usb = buf;
|
|
|
|
memset(usb, 0, sizeof(*usb));
|
|
usb->report_id = DS_OUTPUT_REPORT_USB;
|
|
|
|
rp->data = buf;
|
|
rp->len = sizeof(*usb);
|
|
rp->bt = NULL;
|
|
rp->usb = usb;
|
|
rp->common = &usb->common;
|
|
}
|
|
}
|
|
|
|
static inline void dualsense_schedule_work(struct dualsense *ds)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
if (ds->output_worker_initialized)
|
|
schedule_work(&ds->output_worker);
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Helper function to send DualSense output reports. Applies a CRC at the end of a report
|
|
* for Bluetooth reports.
|
|
*/
|
|
static void dualsense_send_output_report(struct dualsense *ds,
|
|
struct dualsense_output_report *report)
|
|
{
|
|
struct hid_device *hdev = ds->base.hdev;
|
|
|
|
/* Bluetooth packets need to be signed with a CRC in the last 4 bytes. */
|
|
if (report->bt) {
|
|
uint32_t crc;
|
|
uint8_t seed = PS_OUTPUT_CRC32_SEED;
|
|
|
|
crc = crc32_le(0xFFFFFFFF, &seed, 1);
|
|
crc = ~crc32_le(crc, report->data, report->len - 4);
|
|
|
|
report->bt->crc32 = cpu_to_le32(crc);
|
|
}
|
|
|
|
hid_hw_output_report(hdev, report->data, report->len);
|
|
}
|
|
|
|
static void dualsense_output_worker(struct work_struct *work)
|
|
{
|
|
struct dualsense *ds = container_of(work, struct dualsense, output_worker);
|
|
struct dualsense_output_report report;
|
|
struct dualsense_output_report_common *common;
|
|
unsigned long flags;
|
|
|
|
dualsense_init_output_report(ds, &report, ds->output_report_dmabuf);
|
|
common = report.common;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
|
|
if (ds->update_rumble) {
|
|
/* Select classic rumble style haptics and enable it. */
|
|
common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT;
|
|
if (ds->use_vibration_v2)
|
|
common->valid_flag2 |= DS_OUTPUT_VALID_FLAG2_COMPATIBLE_VIBRATION2;
|
|
else
|
|
common->valid_flag0 |= DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION;
|
|
common->motor_left = ds->motor_left;
|
|
common->motor_right = ds->motor_right;
|
|
ds->update_rumble = false;
|
|
}
|
|
|
|
if (ds->update_lightbar) {
|
|
common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE;
|
|
common->lightbar_red = ds->lightbar_red;
|
|
common->lightbar_green = ds->lightbar_green;
|
|
common->lightbar_blue = ds->lightbar_blue;
|
|
|
|
ds->update_lightbar = false;
|
|
}
|
|
|
|
if (ds->update_player_leds) {
|
|
common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_PLAYER_INDICATOR_CONTROL_ENABLE;
|
|
common->player_leds = ds->player_leds_state;
|
|
|
|
ds->update_player_leds = false;
|
|
}
|
|
|
|
if (ds->update_mic_mute) {
|
|
common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_MIC_MUTE_LED_CONTROL_ENABLE;
|
|
common->mute_button_led = ds->mic_muted;
|
|
|
|
if (ds->mic_muted) {
|
|
/* Disable microphone */
|
|
common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE;
|
|
common->power_save_control |= DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE;
|
|
} else {
|
|
/* Enable microphone */
|
|
common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_POWER_SAVE_CONTROL_ENABLE;
|
|
common->power_save_control &= ~DS_OUTPUT_POWER_SAVE_CONTROL_MIC_MUTE;
|
|
}
|
|
|
|
ds->update_mic_mute = false;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
|
|
dualsense_send_output_report(ds, &report);
|
|
}
|
|
|
|
static int dualsense_parse_report(struct ps_device *ps_dev, struct hid_report *report,
|
|
u8 *data, int size)
|
|
{
|
|
struct hid_device *hdev = ps_dev->hdev;
|
|
struct dualsense *ds = container_of(ps_dev, struct dualsense, base);
|
|
struct dualsense_input_report *ds_report;
|
|
uint8_t battery_data, battery_capacity, charging_status, value;
|
|
int battery_status;
|
|
uint32_t sensor_timestamp;
|
|
bool btn_mic_state;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
/*
|
|
* DualSense in USB uses the full HID report for reportID 1, but
|
|
* Bluetooth uses a minimal HID report for reportID 1 and reports
|
|
* the full report using reportID 49.
|
|
*/
|
|
if (hdev->bus == BUS_USB && report->id == DS_INPUT_REPORT_USB &&
|
|
size == DS_INPUT_REPORT_USB_SIZE) {
|
|
ds_report = (struct dualsense_input_report *)&data[1];
|
|
} else if (hdev->bus == BUS_BLUETOOTH && report->id == DS_INPUT_REPORT_BT &&
|
|
size == DS_INPUT_REPORT_BT_SIZE) {
|
|
/* Last 4 bytes of input report contain crc32 */
|
|
uint32_t report_crc = get_unaligned_le32(&data[size - 4]);
|
|
|
|
if (!ps_check_crc32(PS_INPUT_CRC32_SEED, data, size - 4, report_crc)) {
|
|
hid_err(hdev, "DualSense input CRC's check failed\n");
|
|
return -EILSEQ;
|
|
}
|
|
|
|
ds_report = (struct dualsense_input_report *)&data[2];
|
|
} else {
|
|
hid_err(hdev, "Unhandled reportID=%d\n", report->id);
|
|
return -1;
|
|
}
|
|
|
|
input_report_abs(ds->gamepad, ABS_X, ds_report->x);
|
|
input_report_abs(ds->gamepad, ABS_Y, ds_report->y);
|
|
input_report_abs(ds->gamepad, ABS_RX, ds_report->rx);
|
|
input_report_abs(ds->gamepad, ABS_RY, ds_report->ry);
|
|
input_report_abs(ds->gamepad, ABS_Z, ds_report->z);
|
|
input_report_abs(ds->gamepad, ABS_RZ, ds_report->rz);
|
|
|
|
value = ds_report->buttons[0] & DS_BUTTONS0_HAT_SWITCH;
|
|
if (value >= ARRAY_SIZE(ps_gamepad_hat_mapping))
|
|
value = 8; /* center */
|
|
input_report_abs(ds->gamepad, ABS_HAT0X, ps_gamepad_hat_mapping[value].x);
|
|
input_report_abs(ds->gamepad, ABS_HAT0Y, ps_gamepad_hat_mapping[value].y);
|
|
|
|
input_report_key(ds->gamepad, BTN_WEST, ds_report->buttons[0] & DS_BUTTONS0_SQUARE);
|
|
input_report_key(ds->gamepad, BTN_SOUTH, ds_report->buttons[0] & DS_BUTTONS0_CROSS);
|
|
input_report_key(ds->gamepad, BTN_EAST, ds_report->buttons[0] & DS_BUTTONS0_CIRCLE);
|
|
input_report_key(ds->gamepad, BTN_NORTH, ds_report->buttons[0] & DS_BUTTONS0_TRIANGLE);
|
|
input_report_key(ds->gamepad, BTN_TL, ds_report->buttons[1] & DS_BUTTONS1_L1);
|
|
input_report_key(ds->gamepad, BTN_TR, ds_report->buttons[1] & DS_BUTTONS1_R1);
|
|
input_report_key(ds->gamepad, BTN_TL2, ds_report->buttons[1] & DS_BUTTONS1_L2);
|
|
input_report_key(ds->gamepad, BTN_TR2, ds_report->buttons[1] & DS_BUTTONS1_R2);
|
|
input_report_key(ds->gamepad, BTN_SELECT, ds_report->buttons[1] & DS_BUTTONS1_CREATE);
|
|
input_report_key(ds->gamepad, BTN_START, ds_report->buttons[1] & DS_BUTTONS1_OPTIONS);
|
|
input_report_key(ds->gamepad, BTN_THUMBL, ds_report->buttons[1] & DS_BUTTONS1_L3);
|
|
input_report_key(ds->gamepad, BTN_THUMBR, ds_report->buttons[1] & DS_BUTTONS1_R3);
|
|
input_report_key(ds->gamepad, BTN_MODE, ds_report->buttons[2] & DS_BUTTONS2_PS_HOME);
|
|
input_sync(ds->gamepad);
|
|
|
|
/*
|
|
* The DualSense has an internal microphone, which can be muted through a mute button
|
|
* on the device. The driver is expected to read the button state and program the device
|
|
* to mute/unmute audio at the hardware level.
|
|
*/
|
|
btn_mic_state = !!(ds_report->buttons[2] & DS_BUTTONS2_MIC_MUTE);
|
|
if (btn_mic_state && !ds->last_btn_mic_state) {
|
|
spin_lock_irqsave(&ps_dev->lock, flags);
|
|
ds->update_mic_mute = true;
|
|
ds->mic_muted = !ds->mic_muted; /* toggle */
|
|
spin_unlock_irqrestore(&ps_dev->lock, flags);
|
|
|
|
/* Schedule updating of microphone state at hardware level. */
|
|
dualsense_schedule_work(ds);
|
|
}
|
|
ds->last_btn_mic_state = btn_mic_state;
|
|
|
|
/* Parse and calibrate gyroscope data. */
|
|
for (i = 0; i < ARRAY_SIZE(ds_report->gyro); i++) {
|
|
int raw_data = (short)le16_to_cpu(ds_report->gyro[i]);
|
|
int calib_data = mult_frac(ds->gyro_calib_data[i].sens_numer,
|
|
raw_data - ds->gyro_calib_data[i].bias,
|
|
ds->gyro_calib_data[i].sens_denom);
|
|
|
|
input_report_abs(ds->sensors, ds->gyro_calib_data[i].abs_code, calib_data);
|
|
}
|
|
|
|
/* Parse and calibrate accelerometer data. */
|
|
for (i = 0; i < ARRAY_SIZE(ds_report->accel); i++) {
|
|
int raw_data = (short)le16_to_cpu(ds_report->accel[i]);
|
|
int calib_data = mult_frac(ds->accel_calib_data[i].sens_numer,
|
|
raw_data - ds->accel_calib_data[i].bias,
|
|
ds->accel_calib_data[i].sens_denom);
|
|
|
|
input_report_abs(ds->sensors, ds->accel_calib_data[i].abs_code, calib_data);
|
|
}
|
|
|
|
/* Convert timestamp (in 0.33us unit) to timestamp_us */
|
|
sensor_timestamp = le32_to_cpu(ds_report->sensor_timestamp);
|
|
if (!ds->sensor_timestamp_initialized) {
|
|
ds->sensor_timestamp_us = DIV_ROUND_CLOSEST(sensor_timestamp, 3);
|
|
ds->sensor_timestamp_initialized = true;
|
|
} else {
|
|
uint32_t delta;
|
|
|
|
if (ds->prev_sensor_timestamp > sensor_timestamp)
|
|
delta = (U32_MAX - ds->prev_sensor_timestamp + sensor_timestamp + 1);
|
|
else
|
|
delta = sensor_timestamp - ds->prev_sensor_timestamp;
|
|
ds->sensor_timestamp_us += DIV_ROUND_CLOSEST(delta, 3);
|
|
}
|
|
ds->prev_sensor_timestamp = sensor_timestamp;
|
|
input_event(ds->sensors, EV_MSC, MSC_TIMESTAMP, ds->sensor_timestamp_us);
|
|
input_sync(ds->sensors);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ds_report->points); i++) {
|
|
struct dualsense_touch_point *point = &ds_report->points[i];
|
|
bool active = (point->contact & DS_TOUCH_POINT_INACTIVE) ? false : true;
|
|
|
|
input_mt_slot(ds->touchpad, i);
|
|
input_mt_report_slot_state(ds->touchpad, MT_TOOL_FINGER, active);
|
|
|
|
if (active) {
|
|
int x = (point->x_hi << 8) | point->x_lo;
|
|
int y = (point->y_hi << 4) | point->y_lo;
|
|
|
|
input_report_abs(ds->touchpad, ABS_MT_POSITION_X, x);
|
|
input_report_abs(ds->touchpad, ABS_MT_POSITION_Y, y);
|
|
}
|
|
}
|
|
input_mt_sync_frame(ds->touchpad);
|
|
input_report_key(ds->touchpad, BTN_LEFT, ds_report->buttons[2] & DS_BUTTONS2_TOUCHPAD);
|
|
input_sync(ds->touchpad);
|
|
|
|
battery_data = ds_report->status & DS_STATUS_BATTERY_CAPACITY;
|
|
charging_status = (ds_report->status & DS_STATUS_CHARGING) >> DS_STATUS_CHARGING_SHIFT;
|
|
|
|
switch (charging_status) {
|
|
case 0x0:
|
|
/*
|
|
* Each unit of battery data corresponds to 10%
|
|
* 0 = 0-9%, 1 = 10-19%, .. and 10 = 100%
|
|
*/
|
|
battery_capacity = min(battery_data * 10 + 5, 100);
|
|
battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
break;
|
|
case 0x1:
|
|
battery_capacity = min(battery_data * 10 + 5, 100);
|
|
battery_status = POWER_SUPPLY_STATUS_CHARGING;
|
|
break;
|
|
case 0x2:
|
|
battery_capacity = 100;
|
|
battery_status = POWER_SUPPLY_STATUS_FULL;
|
|
break;
|
|
case 0xa: /* voltage or temperature out of range */
|
|
case 0xb: /* temperature error */
|
|
battery_capacity = 0;
|
|
battery_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
break;
|
|
case 0xf: /* charging error */
|
|
default:
|
|
battery_capacity = 0;
|
|
battery_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
}
|
|
|
|
spin_lock_irqsave(&ps_dev->lock, flags);
|
|
ps_dev->battery_capacity = battery_capacity;
|
|
ps_dev->battery_status = battery_status;
|
|
spin_unlock_irqrestore(&ps_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_effect *effect)
|
|
{
|
|
struct hid_device *hdev = input_get_drvdata(dev);
|
|
struct dualsense *ds = hid_get_drvdata(hdev);
|
|
unsigned long flags;
|
|
|
|
if (effect->type != FF_RUMBLE)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
ds->update_rumble = true;
|
|
ds->motor_left = effect->u.rumble.strong_magnitude / 256;
|
|
ds->motor_right = effect->u.rumble.weak_magnitude / 256;
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
|
|
dualsense_schedule_work(ds);
|
|
return 0;
|
|
}
|
|
|
|
static void dualsense_remove(struct ps_device *ps_dev)
|
|
{
|
|
struct dualsense *ds = container_of(ps_dev, struct dualsense, base);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
ds->output_worker_initialized = false;
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
|
|
cancel_work_sync(&ds->output_worker);
|
|
}
|
|
|
|
static int dualsense_reset_leds(struct dualsense *ds)
|
|
{
|
|
struct dualsense_output_report report;
|
|
uint8_t *buf;
|
|
|
|
buf = kzalloc(sizeof(struct dualsense_output_report_bt), GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
dualsense_init_output_report(ds, &report, buf);
|
|
/*
|
|
* On Bluetooth the DualSense outputs an animation on the lightbar
|
|
* during startup and maintains a color afterwards. We need to explicitly
|
|
* reconfigure the lightbar before we can do any programming later on.
|
|
* In USB the lightbar is not on by default, but redoing the setup there
|
|
* doesn't hurt.
|
|
*/
|
|
report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE;
|
|
report.common->lightbar_setup = DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT; /* Fade light out. */
|
|
dualsense_send_output_report(ds, &report);
|
|
|
|
kfree(buf);
|
|
return 0;
|
|
}
|
|
|
|
static void dualsense_set_lightbar(struct dualsense *ds, uint8_t red, uint8_t green, uint8_t blue)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ds->base.lock, flags);
|
|
ds->update_lightbar = true;
|
|
ds->lightbar_red = red;
|
|
ds->lightbar_green = green;
|
|
ds->lightbar_blue = blue;
|
|
spin_unlock_irqrestore(&ds->base.lock, flags);
|
|
|
|
dualsense_schedule_work(ds);
|
|
}
|
|
|
|
static void dualsense_set_player_leds(struct dualsense *ds)
|
|
{
|
|
/*
|
|
* The DualSense controller has a row of 5 LEDs used for player ids.
|
|
* Behavior on the PlayStation 5 console is to center the player id
|
|
* across the LEDs, so e.g. player 1 would be "--x--" with x being 'on'.
|
|
* Follow a similar mapping here.
|
|
*/
|
|
static const int player_ids[5] = {
|
|
BIT(2),
|
|
BIT(3) | BIT(1),
|
|
BIT(4) | BIT(2) | BIT(0),
|
|
BIT(4) | BIT(3) | BIT(1) | BIT(0),
|
|
BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)
|
|
};
|
|
|
|
uint8_t player_id = ds->base.player_id % ARRAY_SIZE(player_ids);
|
|
|
|
ds->update_player_leds = true;
|
|
ds->player_leds_state = player_ids[player_id];
|
|
dualsense_schedule_work(ds);
|
|
}
|
|
|
|
static struct ps_device *dualsense_create(struct hid_device *hdev)
|
|
{
|
|
struct dualsense *ds;
|
|
struct ps_device *ps_dev;
|
|
uint8_t max_output_report_size;
|
|
int i, ret;
|
|
|
|
static const struct ps_led_info player_leds_info[] = {
|
|
{ LED_FUNCTION_PLAYER1, "white", dualsense_player_led_get_brightness,
|
|
dualsense_player_led_set_brightness },
|
|
{ LED_FUNCTION_PLAYER2, "white", dualsense_player_led_get_brightness,
|
|
dualsense_player_led_set_brightness },
|
|
{ LED_FUNCTION_PLAYER3, "white", dualsense_player_led_get_brightness,
|
|
dualsense_player_led_set_brightness },
|
|
{ LED_FUNCTION_PLAYER4, "white", dualsense_player_led_get_brightness,
|
|
dualsense_player_led_set_brightness },
|
|
{ LED_FUNCTION_PLAYER5, "white", dualsense_player_led_get_brightness,
|
|
dualsense_player_led_set_brightness }
|
|
};
|
|
|
|
ds = devm_kzalloc(&hdev->dev, sizeof(*ds), GFP_KERNEL);
|
|
if (!ds)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/*
|
|
* Patch version to allow userspace to distinguish between
|
|
* hid-generic vs hid-playstation axis and button mapping.
|
|
*/
|
|
hdev->version |= HID_PLAYSTATION_VERSION_PATCH;
|
|
|
|
ps_dev = &ds->base;
|
|
ps_dev->hdev = hdev;
|
|
spin_lock_init(&ps_dev->lock);
|
|
ps_dev->battery_capacity = 100; /* initial value until parse_report. */
|
|
ps_dev->battery_status = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
ps_dev->parse_report = dualsense_parse_report;
|
|
ps_dev->remove = dualsense_remove;
|
|
INIT_WORK(&ds->output_worker, dualsense_output_worker);
|
|
ds->output_worker_initialized = true;
|
|
hid_set_drvdata(hdev, ds);
|
|
|
|
max_output_report_size = sizeof(struct dualsense_output_report_bt);
|
|
ds->output_report_dmabuf = devm_kzalloc(&hdev->dev, max_output_report_size, GFP_KERNEL);
|
|
if (!ds->output_report_dmabuf)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
ret = dualsense_get_mac_address(ds);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to get MAC address from DualSense\n");
|
|
return ERR_PTR(ret);
|
|
}
|
|
snprintf(hdev->uniq, sizeof(hdev->uniq), "%pMR", ds->base.mac_address);
|
|
|
|
ret = dualsense_get_firmware_info(ds);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to get firmware info from DualSense\n");
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
/* Original DualSense firmware simulated classic controller rumble through
|
|
* its new haptics hardware. It felt different from classic rumble users
|
|
* were used to. Since then new firmwares were introduced to change behavior
|
|
* and make this new 'v2' behavior default on PlayStation and other platforms.
|
|
* The original DualSense requires a new enough firmware as bundled with PS5
|
|
* software released in 2021. DualSense edge supports it out of the box.
|
|
* Both devices also support the old mode, but it is not really used.
|
|
*/
|
|
if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER) {
|
|
/* Feature version 2.21 introduced new vibration method. */
|
|
ds->use_vibration_v2 = ds->update_version >= DS_FEATURE_VERSION(2, 21);
|
|
} else if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) {
|
|
ds->use_vibration_v2 = true;
|
|
}
|
|
|
|
ret = ps_devices_list_add(ps_dev);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
ret = dualsense_get_calibration_data(ds);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to get calibration data from DualSense\n");
|
|
goto err;
|
|
}
|
|
|
|
ds->gamepad = ps_gamepad_create(hdev, dualsense_play_effect);
|
|
if (IS_ERR(ds->gamepad)) {
|
|
ret = PTR_ERR(ds->gamepad);
|
|
goto err;
|
|
}
|
|
/* Use gamepad input device name as primary device name for e.g. LEDs */
|
|
ps_dev->input_dev_name = dev_name(&ds->gamepad->dev);
|
|
|
|
ds->sensors = ps_sensors_create(hdev, DS_ACC_RANGE, DS_ACC_RES_PER_G,
|
|
DS_GYRO_RANGE, DS_GYRO_RES_PER_DEG_S);
|
|
if (IS_ERR(ds->sensors)) {
|
|
ret = PTR_ERR(ds->sensors);
|
|
goto err;
|
|
}
|
|
|
|
ds->touchpad = ps_touchpad_create(hdev, DS_TOUCHPAD_WIDTH, DS_TOUCHPAD_HEIGHT, 2);
|
|
if (IS_ERR(ds->touchpad)) {
|
|
ret = PTR_ERR(ds->touchpad);
|
|
goto err;
|
|
}
|
|
|
|
ret = ps_device_register_battery(ps_dev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/*
|
|
* The hardware may have control over the LEDs (e.g. in Bluetooth on startup).
|
|
* Reset the LEDs (lightbar, mute, player leds), so we can control them
|
|
* from software.
|
|
*/
|
|
ret = dualsense_reset_leds(ds);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = ps_lightbar_register(ps_dev, &ds->lightbar, dualsense_lightbar_set_brightness);
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* Set default lightbar color. */
|
|
dualsense_set_lightbar(ds, 0, 0, 128); /* blue */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(player_leds_info); i++) {
|
|
const struct ps_led_info *led_info = &player_leds_info[i];
|
|
|
|
ret = ps_led_register(ps_dev, &ds->player_leds[i], led_info);
|
|
if (ret < 0)
|
|
goto err;
|
|
}
|
|
|
|
ret = ps_device_set_player_id(ps_dev);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to assign player id for DualSense: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
/* Set player LEDs to our player id. */
|
|
dualsense_set_player_leds(ds);
|
|
|
|
/*
|
|
* Reporting hardware and firmware is important as there are frequent updates, which
|
|
* can change behavior.
|
|
*/
|
|
hid_info(hdev, "Registered DualSense controller hw_version=0x%08x fw_version=0x%08x\n",
|
|
ds->base.hw_version, ds->base.fw_version);
|
|
|
|
return &ds->base;
|
|
|
|
err:
|
|
ps_devices_list_remove(ps_dev);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
static int ps_raw_event(struct hid_device *hdev, struct hid_report *report,
|
|
u8 *data, int size)
|
|
{
|
|
struct ps_device *dev = hid_get_drvdata(hdev);
|
|
|
|
if (dev && dev->parse_report)
|
|
return dev->parse_report(dev, report, data, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ps_probe(struct hid_device *hdev, const struct hid_device_id *id)
|
|
{
|
|
struct ps_device *dev;
|
|
int ret;
|
|
|
|
ret = hid_parse(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "Parse failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to start HID device\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = hid_hw_open(hdev);
|
|
if (ret) {
|
|
hid_err(hdev, "Failed to open HID device\n");
|
|
goto err_stop;
|
|
}
|
|
|
|
if (hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER ||
|
|
hdev->product == USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) {
|
|
dev = dualsense_create(hdev);
|
|
if (IS_ERR(dev)) {
|
|
hid_err(hdev, "Failed to create dualsense.\n");
|
|
ret = PTR_ERR(dev);
|
|
goto err_close;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
|
|
err_close:
|
|
hid_hw_close(hdev);
|
|
err_stop:
|
|
hid_hw_stop(hdev);
|
|
return ret;
|
|
}
|
|
|
|
static void ps_remove(struct hid_device *hdev)
|
|
{
|
|
struct ps_device *dev = hid_get_drvdata(hdev);
|
|
|
|
ps_devices_list_remove(dev);
|
|
ps_device_release_player_id(dev);
|
|
|
|
if (dev->remove)
|
|
dev->remove(dev);
|
|
|
|
hid_hw_close(hdev);
|
|
hid_hw_stop(hdev);
|
|
}
|
|
|
|
static const struct hid_device_id ps_devices[] = {
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER) },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER) },
|
|
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) },
|
|
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS5_CONTROLLER_2) },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(hid, ps_devices);
|
|
|
|
static struct hid_driver ps_driver = {
|
|
.name = "playstation",
|
|
.id_table = ps_devices,
|
|
.probe = ps_probe,
|
|
.remove = ps_remove,
|
|
.raw_event = ps_raw_event,
|
|
.driver = {
|
|
.dev_groups = ps_device_groups,
|
|
},
|
|
};
|
|
|
|
static int __init ps_init(void)
|
|
{
|
|
return hid_register_driver(&ps_driver);
|
|
}
|
|
|
|
static void __exit ps_exit(void)
|
|
{
|
|
hid_unregister_driver(&ps_driver);
|
|
ida_destroy(&ps_player_id_allocator);
|
|
}
|
|
|
|
module_init(ps_init);
|
|
module_exit(ps_exit);
|
|
|
|
MODULE_AUTHOR("Sony Interactive Entertainment");
|
|
MODULE_DESCRIPTION("HID Driver for PlayStation peripherals.");
|
|
MODULE_LICENSE("GPL");
|