1235 lines
33 KiB
C
1235 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2016 Allwinnertech Co., Ltd.
|
|
* Copyright (C) 2017-2018 Bootlin
|
|
*
|
|
* Maxime Ripard <maxime.ripard@bootlin.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/crc-ccitt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy-mipi-dphy.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_print.h>
|
|
#include <drm/drm_probe_helper.h>
|
|
#include <drm/drm_simple_kms_helper.h>
|
|
|
|
#include "sun4i_crtc.h"
|
|
#include "sun4i_tcon.h"
|
|
#include "sun6i_mipi_dsi.h"
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#define SUN6I_DSI_CTL_REG 0x000
|
|
#define SUN6I_DSI_CTL_EN BIT(0)
|
|
|
|
#define SUN6I_DSI_BASIC_CTL_REG 0x00c
|
|
#define SUN6I_DSI_BASIC_CTL_TRAIL_INV(n) (((n) & 0xf) << 4)
|
|
#define SUN6I_DSI_BASIC_CTL_TRAIL_FILL BIT(3)
|
|
#define SUN6I_DSI_BASIC_CTL_HBP_DIS BIT(2)
|
|
#define SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS BIT(1)
|
|
#define SUN6I_DSI_BASIC_CTL_VIDEO_BURST BIT(0)
|
|
|
|
#define SUN6I_DSI_BASIC_CTL0_REG 0x010
|
|
#define SUN6I_DSI_BASIC_CTL0_HS_EOTP_EN BIT(18)
|
|
#define SUN6I_DSI_BASIC_CTL0_CRC_EN BIT(17)
|
|
#define SUN6I_DSI_BASIC_CTL0_ECC_EN BIT(16)
|
|
#define SUN6I_DSI_BASIC_CTL0_INST_ST BIT(0)
|
|
|
|
#define SUN6I_DSI_BASIC_CTL1_REG 0x014
|
|
#define SUN6I_DSI_BASIC_CTL1_VIDEO_ST_DELAY(n) (((n) & 0x1fff) << 4)
|
|
#define SUN6I_DSI_BASIC_CTL1_VIDEO_FILL BIT(2)
|
|
#define SUN6I_DSI_BASIC_CTL1_VIDEO_PRECISION BIT(1)
|
|
#define SUN6I_DSI_BASIC_CTL1_VIDEO_MODE BIT(0)
|
|
|
|
#define SUN6I_DSI_BASIC_SIZE0_REG 0x018
|
|
#define SUN6I_DSI_BASIC_SIZE0_VBP(n) (((n) & 0xfff) << 16)
|
|
#define SUN6I_DSI_BASIC_SIZE0_VSA(n) ((n) & 0xfff)
|
|
|
|
#define SUN6I_DSI_BASIC_SIZE1_REG 0x01c
|
|
#define SUN6I_DSI_BASIC_SIZE1_VT(n) (((n) & 0xfff) << 16)
|
|
#define SUN6I_DSI_BASIC_SIZE1_VACT(n) ((n) & 0xfff)
|
|
|
|
#define SUN6I_DSI_INST_FUNC_REG(n) (0x020 + (n) * 0x04)
|
|
#define SUN6I_DSI_INST_FUNC_INST_MODE(n) (((n) & 0xf) << 28)
|
|
#define SUN6I_DSI_INST_FUNC_ESCAPE_ENTRY(n) (((n) & 0xf) << 24)
|
|
#define SUN6I_DSI_INST_FUNC_TRANS_PACKET(n) (((n) & 0xf) << 20)
|
|
#define SUN6I_DSI_INST_FUNC_LANE_CEN BIT(4)
|
|
#define SUN6I_DSI_INST_FUNC_LANE_DEN(n) ((n) & 0xf)
|
|
|
|
#define SUN6I_DSI_INST_LOOP_SEL_REG 0x040
|
|
|
|
#define SUN6I_DSI_INST_LOOP_NUM_REG(n) (0x044 + (n) * 0x10)
|
|
#define SUN6I_DSI_INST_LOOP_NUM_N1(n) (((n) & 0xfff) << 16)
|
|
#define SUN6I_DSI_INST_LOOP_NUM_N0(n) ((n) & 0xfff)
|
|
|
|
#define SUN6I_DSI_INST_JUMP_SEL_REG 0x048
|
|
|
|
#define SUN6I_DSI_INST_JUMP_CFG_REG(n) (0x04c + (n) * 0x04)
|
|
#define SUN6I_DSI_INST_JUMP_CFG_TO(n) (((n) & 0xf) << 20)
|
|
#define SUN6I_DSI_INST_JUMP_CFG_POINT(n) (((n) & 0xf) << 16)
|
|
#define SUN6I_DSI_INST_JUMP_CFG_NUM(n) ((n) & 0xffff)
|
|
|
|
#define SUN6I_DSI_TRANS_START_REG 0x060
|
|
|
|
#define SUN6I_DSI_TRANS_ZERO_REG 0x078
|
|
|
|
#define SUN6I_DSI_TCON_DRQ_REG 0x07c
|
|
#define SUN6I_DSI_TCON_DRQ_ENABLE_MODE BIT(28)
|
|
#define SUN6I_DSI_TCON_DRQ_SET(n) ((n) & 0x3ff)
|
|
|
|
#define SUN6I_DSI_PIXEL_CTL0_REG 0x080
|
|
#define SUN6I_DSI_PIXEL_CTL0_PD_PLUG_DISABLE BIT(16)
|
|
#define SUN6I_DSI_PIXEL_CTL0_FORMAT(n) ((n) & 0xf)
|
|
|
|
#define SUN6I_DSI_PIXEL_CTL1_REG 0x084
|
|
|
|
#define SUN6I_DSI_PIXEL_PH_REG 0x090
|
|
#define SUN6I_DSI_PIXEL_PH_ECC(n) (((n) & 0xff) << 24)
|
|
#define SUN6I_DSI_PIXEL_PH_WC(n) (((n) & 0xffff) << 8)
|
|
#define SUN6I_DSI_PIXEL_PH_VC(n) (((n) & 3) << 6)
|
|
#define SUN6I_DSI_PIXEL_PH_DT(n) ((n) & 0x3f)
|
|
|
|
#define SUN6I_DSI_PIXEL_PF0_REG 0x098
|
|
#define SUN6I_DSI_PIXEL_PF0_CRC_FORCE(n) ((n) & 0xffff)
|
|
|
|
#define SUN6I_DSI_PIXEL_PF1_REG 0x09c
|
|
#define SUN6I_DSI_PIXEL_PF1_CRC_INIT_LINEN(n) (((n) & 0xffff) << 16)
|
|
#define SUN6I_DSI_PIXEL_PF1_CRC_INIT_LINE0(n) ((n) & 0xffff)
|
|
|
|
#define SUN6I_DSI_SYNC_HSS_REG 0x0b0
|
|
|
|
#define SUN6I_DSI_SYNC_HSE_REG 0x0b4
|
|
|
|
#define SUN6I_DSI_SYNC_VSS_REG 0x0b8
|
|
|
|
#define SUN6I_DSI_SYNC_VSE_REG 0x0bc
|
|
|
|
#define SUN6I_DSI_BLK_HSA0_REG 0x0c0
|
|
|
|
#define SUN6I_DSI_BLK_HSA1_REG 0x0c4
|
|
#define SUN6I_DSI_BLK_PF(n) (((n) & 0xffff) << 16)
|
|
#define SUN6I_DSI_BLK_PD(n) ((n) & 0xff)
|
|
|
|
#define SUN6I_DSI_BLK_HBP0_REG 0x0c8
|
|
|
|
#define SUN6I_DSI_BLK_HBP1_REG 0x0cc
|
|
|
|
#define SUN6I_DSI_BLK_HFP0_REG 0x0d0
|
|
|
|
#define SUN6I_DSI_BLK_HFP1_REG 0x0d4
|
|
|
|
#define SUN6I_DSI_BLK_HBLK0_REG 0x0e0
|
|
|
|
#define SUN6I_DSI_BLK_HBLK1_REG 0x0e4
|
|
|
|
#define SUN6I_DSI_BLK_VBLK0_REG 0x0e8
|
|
|
|
#define SUN6I_DSI_BLK_VBLK1_REG 0x0ec
|
|
|
|
#define SUN6I_DSI_BURST_LINE_REG 0x0f0
|
|
#define SUN6I_DSI_BURST_LINE_SYNC_POINT(n) (((n) & 0xffff) << 16)
|
|
#define SUN6I_DSI_BURST_LINE_NUM(n) ((n) & 0xffff)
|
|
|
|
#define SUN6I_DSI_BURST_DRQ_REG 0x0f4
|
|
#define SUN6I_DSI_BURST_DRQ_EDGE1(n) (((n) & 0xffff) << 16)
|
|
#define SUN6I_DSI_BURST_DRQ_EDGE0(n) ((n) & 0xffff)
|
|
|
|
#define SUN6I_DSI_CMD_CTL_REG 0x200
|
|
#define SUN6I_DSI_CMD_CTL_RX_OVERFLOW BIT(26)
|
|
#define SUN6I_DSI_CMD_CTL_RX_FLAG BIT(25)
|
|
#define SUN6I_DSI_CMD_CTL_TX_FLAG BIT(9)
|
|
|
|
#define SUN6I_DSI_CMD_RX_REG(n) (0x240 + (n) * 0x04)
|
|
|
|
#define SUN6I_DSI_DEBUG_DATA_REG 0x2f8
|
|
|
|
#define SUN6I_DSI_CMD_TX_REG(n) (0x300 + (n) * 0x04)
|
|
|
|
#define SUN6I_DSI_SYNC_POINT 40
|
|
|
|
enum sun6i_dsi_start_inst {
|
|
DSI_START_LPRX,
|
|
DSI_START_LPTX,
|
|
DSI_START_HSC,
|
|
DSI_START_HSD,
|
|
};
|
|
|
|
enum sun6i_dsi_inst_id {
|
|
DSI_INST_ID_LP11 = 0,
|
|
DSI_INST_ID_TBA,
|
|
DSI_INST_ID_HSC,
|
|
DSI_INST_ID_HSD,
|
|
DSI_INST_ID_LPDT,
|
|
DSI_INST_ID_HSCEXIT,
|
|
DSI_INST_ID_NOP,
|
|
DSI_INST_ID_DLY,
|
|
DSI_INST_ID_END = 15,
|
|
};
|
|
|
|
enum sun6i_dsi_inst_mode {
|
|
DSI_INST_MODE_STOP = 0,
|
|
DSI_INST_MODE_TBA,
|
|
DSI_INST_MODE_HS,
|
|
DSI_INST_MODE_ESCAPE,
|
|
DSI_INST_MODE_HSCEXIT,
|
|
DSI_INST_MODE_NOP,
|
|
};
|
|
|
|
enum sun6i_dsi_inst_escape {
|
|
DSI_INST_ESCA_LPDT = 0,
|
|
DSI_INST_ESCA_ULPS,
|
|
DSI_INST_ESCA_UN1,
|
|
DSI_INST_ESCA_UN2,
|
|
DSI_INST_ESCA_RESET,
|
|
DSI_INST_ESCA_UN3,
|
|
DSI_INST_ESCA_UN4,
|
|
DSI_INST_ESCA_UN5,
|
|
};
|
|
|
|
enum sun6i_dsi_inst_packet {
|
|
DSI_INST_PACK_PIXEL = 0,
|
|
DSI_INST_PACK_COMMAND,
|
|
};
|
|
|
|
static const u32 sun6i_dsi_ecc_array[] = {
|
|
[0] = (BIT(0) | BIT(1) | BIT(2) | BIT(4) | BIT(5) | BIT(7) | BIT(10) |
|
|
BIT(11) | BIT(13) | BIT(16) | BIT(20) | BIT(21) | BIT(22) |
|
|
BIT(23)),
|
|
[1] = (BIT(0) | BIT(1) | BIT(3) | BIT(4) | BIT(6) | BIT(8) | BIT(10) |
|
|
BIT(12) | BIT(14) | BIT(17) | BIT(20) | BIT(21) | BIT(22) |
|
|
BIT(23)),
|
|
[2] = (BIT(0) | BIT(2) | BIT(3) | BIT(5) | BIT(6) | BIT(9) | BIT(11) |
|
|
BIT(12) | BIT(15) | BIT(18) | BIT(20) | BIT(21) | BIT(22)),
|
|
[3] = (BIT(1) | BIT(2) | BIT(3) | BIT(7) | BIT(8) | BIT(9) | BIT(13) |
|
|
BIT(14) | BIT(15) | BIT(19) | BIT(20) | BIT(21) | BIT(23)),
|
|
[4] = (BIT(4) | BIT(5) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | BIT(16) |
|
|
BIT(17) | BIT(18) | BIT(19) | BIT(20) | BIT(22) | BIT(23)),
|
|
[5] = (BIT(10) | BIT(11) | BIT(12) | BIT(13) | BIT(14) | BIT(15) |
|
|
BIT(16) | BIT(17) | BIT(18) | BIT(19) | BIT(21) | BIT(22) |
|
|
BIT(23)),
|
|
};
|
|
|
|
static u32 sun6i_dsi_ecc_compute(unsigned int data)
|
|
{
|
|
int i;
|
|
u8 ecc = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sun6i_dsi_ecc_array); i++) {
|
|
u32 field = sun6i_dsi_ecc_array[i];
|
|
bool init = false;
|
|
u8 val = 0;
|
|
int j;
|
|
|
|
for (j = 0; j < 24; j++) {
|
|
if (!(BIT(j) & field))
|
|
continue;
|
|
|
|
if (!init) {
|
|
val = (BIT(j) & data) ? 1 : 0;
|
|
init = true;
|
|
} else {
|
|
val ^= (BIT(j) & data) ? 1 : 0;
|
|
}
|
|
}
|
|
|
|
ecc |= val << i;
|
|
}
|
|
|
|
return ecc;
|
|
}
|
|
|
|
static u16 sun6i_dsi_crc_compute(u8 const *buffer, size_t len)
|
|
{
|
|
return crc_ccitt(0xffff, buffer, len);
|
|
}
|
|
|
|
static u16 sun6i_dsi_crc_repeat(u8 pd, u8 *buffer, size_t len)
|
|
{
|
|
memset(buffer, pd, len);
|
|
|
|
return sun6i_dsi_crc_compute(buffer, len);
|
|
}
|
|
|
|
static u32 sun6i_dsi_build_sync_pkt(u8 dt, u8 vc, u8 d0, u8 d1)
|
|
{
|
|
u32 val = dt & 0x3f;
|
|
|
|
val |= (vc & 3) << 6;
|
|
val |= (d0 & 0xff) << 8;
|
|
val |= (d1 & 0xff) << 16;
|
|
val |= sun6i_dsi_ecc_compute(val) << 24;
|
|
|
|
return val;
|
|
}
|
|
|
|
static u32 sun6i_dsi_build_blk0_pkt(u8 vc, u16 wc)
|
|
{
|
|
return sun6i_dsi_build_sync_pkt(MIPI_DSI_BLANKING_PACKET, vc,
|
|
wc & 0xff, wc >> 8);
|
|
}
|
|
|
|
static u32 sun6i_dsi_build_blk1_pkt(u16 pd, u8 *buffer, size_t len)
|
|
{
|
|
u32 val = SUN6I_DSI_BLK_PD(pd);
|
|
|
|
return val | SUN6I_DSI_BLK_PF(sun6i_dsi_crc_repeat(pd, buffer, len));
|
|
}
|
|
|
|
static void sun6i_dsi_inst_abort(struct sun6i_dsi *dsi)
|
|
{
|
|
regmap_update_bits(dsi->regs, SUN6I_DSI_BASIC_CTL0_REG,
|
|
SUN6I_DSI_BASIC_CTL0_INST_ST, 0);
|
|
}
|
|
|
|
static void sun6i_dsi_inst_commit(struct sun6i_dsi *dsi)
|
|
{
|
|
regmap_update_bits(dsi->regs, SUN6I_DSI_BASIC_CTL0_REG,
|
|
SUN6I_DSI_BASIC_CTL0_INST_ST,
|
|
SUN6I_DSI_BASIC_CTL0_INST_ST);
|
|
}
|
|
|
|
static int sun6i_dsi_inst_wait_for_completion(struct sun6i_dsi *dsi)
|
|
{
|
|
u32 val;
|
|
|
|
return regmap_read_poll_timeout(dsi->regs, SUN6I_DSI_BASIC_CTL0_REG,
|
|
val,
|
|
!(val & SUN6I_DSI_BASIC_CTL0_INST_ST),
|
|
100, 5000);
|
|
}
|
|
|
|
static void sun6i_dsi_inst_setup(struct sun6i_dsi *dsi,
|
|
enum sun6i_dsi_inst_id id,
|
|
enum sun6i_dsi_inst_mode mode,
|
|
bool clock, u8 data,
|
|
enum sun6i_dsi_inst_packet packet,
|
|
enum sun6i_dsi_inst_escape escape)
|
|
{
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_FUNC_REG(id),
|
|
SUN6I_DSI_INST_FUNC_INST_MODE(mode) |
|
|
SUN6I_DSI_INST_FUNC_ESCAPE_ENTRY(escape) |
|
|
SUN6I_DSI_INST_FUNC_TRANS_PACKET(packet) |
|
|
(clock ? SUN6I_DSI_INST_FUNC_LANE_CEN : 0) |
|
|
SUN6I_DSI_INST_FUNC_LANE_DEN(data));
|
|
}
|
|
|
|
static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
u8 lanes_mask = GENMASK(device->lanes - 1, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_LP11, DSI_INST_MODE_STOP,
|
|
true, lanes_mask, 0, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_TBA, DSI_INST_MODE_TBA,
|
|
false, 1, 0, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_HSC, DSI_INST_MODE_HS,
|
|
true, 0, DSI_INST_PACK_PIXEL, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_HSD, DSI_INST_MODE_HS,
|
|
false, lanes_mask, DSI_INST_PACK_PIXEL, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_LPDT, DSI_INST_MODE_ESCAPE,
|
|
false, 1, DSI_INST_PACK_COMMAND,
|
|
DSI_INST_ESCA_LPDT);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_HSCEXIT, DSI_INST_MODE_HSCEXIT,
|
|
true, 0, 0, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_NOP, DSI_INST_MODE_STOP,
|
|
false, lanes_mask, 0, 0);
|
|
|
|
sun6i_dsi_inst_setup(dsi, DSI_INST_ID_DLY, DSI_INST_MODE_NOP,
|
|
true, lanes_mask, 0, 0);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_CFG_REG(0),
|
|
SUN6I_DSI_INST_JUMP_CFG_POINT(DSI_INST_ID_NOP) |
|
|
SUN6I_DSI_INST_JUMP_CFG_TO(DSI_INST_ID_HSCEXIT) |
|
|
SUN6I_DSI_INST_JUMP_CFG_NUM(1));
|
|
};
|
|
|
|
static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
u16 delay = mode->vtotal - (mode->vsync_start - mode->vdisplay) + 1;
|
|
|
|
if (delay > mode->vtotal)
|
|
delay = delay % mode->vtotal;
|
|
|
|
return max_t(u16, delay, 1);
|
|
}
|
|
|
|
static u16 sun6i_dsi_get_line_num(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
|
|
|
|
return mode->htotal * Bpp / device->lanes;
|
|
}
|
|
|
|
static u16 sun6i_dsi_get_drq_edge0(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode,
|
|
u16 line_num, u16 edge1)
|
|
{
|
|
u16 edge0 = edge1;
|
|
|
|
edge0 += (mode->hdisplay + 40) * SUN6I_DSI_TCON_DIV / 8;
|
|
|
|
if (edge0 > line_num)
|
|
return edge0 - line_num;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static u16 sun6i_dsi_get_drq_edge1(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode,
|
|
u16 line_num)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
|
|
unsigned int hbp = mode->htotal - mode->hsync_end;
|
|
u16 edge1;
|
|
|
|
edge1 = SUN6I_DSI_SYNC_POINT;
|
|
edge1 += (mode->hdisplay + hbp + 20) * Bpp / device->lanes;
|
|
|
|
if (edge1 > line_num)
|
|
return line_num;
|
|
|
|
return edge1;
|
|
}
|
|
|
|
static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
u32 val = 0;
|
|
|
|
if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
|
|
u16 line_num = sun6i_dsi_get_line_num(dsi, mode);
|
|
u16 edge0, edge1;
|
|
|
|
edge1 = sun6i_dsi_get_drq_edge1(dsi, mode, line_num);
|
|
edge0 = sun6i_dsi_get_drq_edge0(dsi, mode, line_num, edge1);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BURST_DRQ_REG,
|
|
SUN6I_DSI_BURST_DRQ_EDGE0(edge0) |
|
|
SUN6I_DSI_BURST_DRQ_EDGE1(edge1));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BURST_LINE_REG,
|
|
SUN6I_DSI_BURST_LINE_NUM(line_num) |
|
|
SUN6I_DSI_BURST_LINE_SYNC_POINT(SUN6I_DSI_SYNC_POINT));
|
|
|
|
val = SUN6I_DSI_TCON_DRQ_ENABLE_MODE;
|
|
} else if ((mode->hsync_start - mode->hdisplay) > 20) {
|
|
/* Maaaaaagic */
|
|
u16 drq = (mode->hsync_start - mode->hdisplay) - 20;
|
|
|
|
drq *= mipi_dsi_pixel_format_to_bpp(device->format);
|
|
drq /= 32;
|
|
|
|
val = (SUN6I_DSI_TCON_DRQ_ENABLE_MODE |
|
|
SUN6I_DSI_TCON_DRQ_SET(drq));
|
|
}
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_TCON_DRQ_REG, val);
|
|
}
|
|
|
|
static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
u16 delay = 50 - 1;
|
|
|
|
if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
|
|
u32 hsync_porch = (mode->htotal - mode->hdisplay) * 150;
|
|
|
|
delay = (hsync_porch / ((mode->clock / 1000) * 8));
|
|
delay -= 50;
|
|
}
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
|
|
2 << (4 * DSI_INST_ID_LP11) |
|
|
3 << (4 * DSI_INST_ID_DLY));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0),
|
|
SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
|
|
SUN6I_DSI_INST_LOOP_NUM_N1(delay));
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(1),
|
|
SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
|
|
SUN6I_DSI_INST_LOOP_NUM_N1(delay));
|
|
}
|
|
|
|
static void sun6i_dsi_setup_format(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
u32 val = SUN6I_DSI_PIXEL_PH_VC(device->channel);
|
|
u8 dt, fmt;
|
|
u16 wc;
|
|
|
|
/*
|
|
* TODO: The format defines are only valid in video mode and
|
|
* change in command mode.
|
|
*/
|
|
switch (device->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
dt = MIPI_DSI_PACKED_PIXEL_STREAM_24;
|
|
fmt = 8;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
dt = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
|
|
fmt = 9;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
dt = MIPI_DSI_PACKED_PIXEL_STREAM_18;
|
|
fmt = 10;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
dt = MIPI_DSI_PACKED_PIXEL_STREAM_16;
|
|
fmt = 11;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
val |= SUN6I_DSI_PIXEL_PH_DT(dt);
|
|
|
|
wc = mode->hdisplay * mipi_dsi_pixel_format_to_bpp(device->format) / 8;
|
|
val |= SUN6I_DSI_PIXEL_PH_WC(wc);
|
|
val |= SUN6I_DSI_PIXEL_PH_ECC(sun6i_dsi_ecc_compute(val));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_PIXEL_PH_REG, val);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_PIXEL_PF0_REG,
|
|
SUN6I_DSI_PIXEL_PF0_CRC_FORCE(0xffff));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_PIXEL_PF1_REG,
|
|
SUN6I_DSI_PIXEL_PF1_CRC_INIT_LINE0(0xffff) |
|
|
SUN6I_DSI_PIXEL_PF1_CRC_INIT_LINEN(0xffff));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_PIXEL_CTL0_REG,
|
|
SUN6I_DSI_PIXEL_CTL0_PD_PLUG_DISABLE |
|
|
SUN6I_DSI_PIXEL_CTL0_FORMAT(fmt));
|
|
}
|
|
|
|
static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
|
|
struct drm_display_mode *mode)
|
|
{
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
|
|
u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0;
|
|
u32 basic_ctl = 0;
|
|
size_t bytes;
|
|
u8 *buffer;
|
|
|
|
/* Do all timing calculations up front to allocate buffer space */
|
|
|
|
if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) {
|
|
hblk = mode->hdisplay * Bpp;
|
|
basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST |
|
|
SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS |
|
|
SUN6I_DSI_BASIC_CTL_HBP_DIS;
|
|
|
|
if (device->lanes == 4)
|
|
basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL |
|
|
SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc);
|
|
} else {
|
|
/*
|
|
* A sync period is composed of a blanking packet (4
|
|
* bytes + payload + 2 bytes) and a sync event packet
|
|
* (4 bytes). Its minimal size is therefore 10 bytes
|
|
*/
|
|
#define HSA_PACKET_OVERHEAD 10
|
|
hsa = max(HSA_PACKET_OVERHEAD,
|
|
(mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD);
|
|
|
|
/*
|
|
* The backporch is set using a blanking packet (4
|
|
* bytes + payload + 2 bytes). Its minimal size is
|
|
* therefore 6 bytes
|
|
*/
|
|
#define HBP_PACKET_OVERHEAD 6
|
|
hbp = max(HBP_PACKET_OVERHEAD,
|
|
(mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD);
|
|
|
|
/*
|
|
* The frontporch is set using a sync event (4 bytes)
|
|
* and two blanking packets (each one is 4 bytes +
|
|
* payload + 2 bytes). Its minimal size is therefore
|
|
* 16 bytes
|
|
*/
|
|
#define HFP_PACKET_OVERHEAD 16
|
|
hfp = max(HFP_PACKET_OVERHEAD,
|
|
(mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD);
|
|
|
|
/*
|
|
* The blanking is set using a sync event (4 bytes)
|
|
* and a blanking packet (4 bytes + payload + 2
|
|
* bytes). Its minimal size is therefore 10 bytes.
|
|
*/
|
|
#define HBLK_PACKET_OVERHEAD 10
|
|
hblk = max(HBLK_PACKET_OVERHEAD,
|
|
(mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp -
|
|
HBLK_PACKET_OVERHEAD);
|
|
|
|
/*
|
|
* And I'm not entirely sure what vblk is about. The driver in
|
|
* Allwinner BSP is using a rather convoluted calculation
|
|
* there only for 4 lanes. However, using 0 (the !4 lanes
|
|
* case) even with a 4 lanes screen seems to work...
|
|
*/
|
|
vblk = 0;
|
|
}
|
|
|
|
/* How many bytes do we need to send all payloads? */
|
|
bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk);
|
|
buffer = kmalloc(bytes, GFP_KERNEL);
|
|
if (WARN_ON(!buffer))
|
|
return;
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL_REG, basic_ctl);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_SYNC_HSS_REG,
|
|
sun6i_dsi_build_sync_pkt(MIPI_DSI_H_SYNC_START,
|
|
device->channel,
|
|
0, 0));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_SYNC_HSE_REG,
|
|
sun6i_dsi_build_sync_pkt(MIPI_DSI_H_SYNC_END,
|
|
device->channel,
|
|
0, 0));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_SYNC_VSS_REG,
|
|
sun6i_dsi_build_sync_pkt(MIPI_DSI_V_SYNC_START,
|
|
device->channel,
|
|
0, 0));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_SYNC_VSE_REG,
|
|
sun6i_dsi_build_sync_pkt(MIPI_DSI_V_SYNC_END,
|
|
device->channel,
|
|
0, 0));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE0_REG,
|
|
SUN6I_DSI_BASIC_SIZE0_VSA(mode->vsync_end -
|
|
mode->vsync_start) |
|
|
SUN6I_DSI_BASIC_SIZE0_VBP(mode->vtotal -
|
|
mode->vsync_end));
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BASIC_SIZE1_REG,
|
|
SUN6I_DSI_BASIC_SIZE1_VACT(mode->vdisplay) |
|
|
SUN6I_DSI_BASIC_SIZE1_VT(mode->vtotal));
|
|
|
|
/* sync */
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HSA0_REG,
|
|
sun6i_dsi_build_blk0_pkt(device->channel, hsa));
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HSA1_REG,
|
|
sun6i_dsi_build_blk1_pkt(0, buffer, hsa));
|
|
|
|
/* backporch */
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HBP0_REG,
|
|
sun6i_dsi_build_blk0_pkt(device->channel, hbp));
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HBP1_REG,
|
|
sun6i_dsi_build_blk1_pkt(0, buffer, hbp));
|
|
|
|
/* frontporch */
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HFP0_REG,
|
|
sun6i_dsi_build_blk0_pkt(device->channel, hfp));
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HFP1_REG,
|
|
sun6i_dsi_build_blk1_pkt(0, buffer, hfp));
|
|
|
|
/* hblk */
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HBLK0_REG,
|
|
sun6i_dsi_build_blk0_pkt(device->channel, hblk));
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_HBLK1_REG,
|
|
sun6i_dsi_build_blk1_pkt(0, buffer, hblk));
|
|
|
|
/* vblk */
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_VBLK0_REG,
|
|
sun6i_dsi_build_blk0_pkt(device->channel, vblk));
|
|
regmap_write(dsi->regs, SUN6I_DSI_BLK_VBLK1_REG,
|
|
sun6i_dsi_build_blk1_pkt(0, buffer, vblk));
|
|
|
|
kfree(buffer);
|
|
}
|
|
|
|
static int sun6i_dsi_start(struct sun6i_dsi *dsi,
|
|
enum sun6i_dsi_start_inst func)
|
|
{
|
|
switch (func) {
|
|
case DSI_START_LPTX:
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_SEL_REG,
|
|
DSI_INST_ID_LPDT << (4 * DSI_INST_ID_LP11) |
|
|
DSI_INST_ID_END << (4 * DSI_INST_ID_LPDT));
|
|
break;
|
|
case DSI_START_LPRX:
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_SEL_REG,
|
|
DSI_INST_ID_LPDT << (4 * DSI_INST_ID_LP11) |
|
|
DSI_INST_ID_DLY << (4 * DSI_INST_ID_LPDT) |
|
|
DSI_INST_ID_TBA << (4 * DSI_INST_ID_DLY) |
|
|
DSI_INST_ID_END << (4 * DSI_INST_ID_TBA));
|
|
break;
|
|
case DSI_START_HSC:
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_SEL_REG,
|
|
DSI_INST_ID_HSC << (4 * DSI_INST_ID_LP11) |
|
|
DSI_INST_ID_END << (4 * DSI_INST_ID_HSC));
|
|
break;
|
|
case DSI_START_HSD:
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_SEL_REG,
|
|
DSI_INST_ID_NOP << (4 * DSI_INST_ID_LP11) |
|
|
DSI_INST_ID_HSD << (4 * DSI_INST_ID_NOP) |
|
|
DSI_INST_ID_DLY << (4 * DSI_INST_ID_HSD) |
|
|
DSI_INST_ID_NOP << (4 * DSI_INST_ID_DLY) |
|
|
DSI_INST_ID_END << (4 * DSI_INST_ID_HSCEXIT));
|
|
break;
|
|
default:
|
|
regmap_write(dsi->regs, SUN6I_DSI_INST_JUMP_SEL_REG,
|
|
DSI_INST_ID_END << (4 * DSI_INST_ID_LP11));
|
|
break;
|
|
}
|
|
|
|
sun6i_dsi_inst_abort(dsi);
|
|
sun6i_dsi_inst_commit(dsi);
|
|
|
|
if (func == DSI_START_HSC)
|
|
regmap_write_bits(dsi->regs,
|
|
SUN6I_DSI_INST_FUNC_REG(DSI_INST_ID_LP11),
|
|
SUN6I_DSI_INST_FUNC_LANE_CEN, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
|
|
struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
|
|
struct mipi_dsi_device *device = dsi->device;
|
|
union phy_configure_opts opts = { };
|
|
struct phy_configure_opts_mipi_dphy *cfg = &opts.mipi_dphy;
|
|
u16 delay;
|
|
int err;
|
|
|
|
DRM_DEBUG_DRIVER("Enabling DSI output\n");
|
|
|
|
err = regulator_enable(dsi->regulator);
|
|
if (err)
|
|
dev_warn(dsi->dev, "failed to enable VCC-DSI supply: %d\n", err);
|
|
|
|
reset_control_deassert(dsi->reset);
|
|
clk_prepare_enable(dsi->mod_clk);
|
|
|
|
/*
|
|
* Enable the DSI block.
|
|
*/
|
|
regmap_write(dsi->regs, SUN6I_DSI_CTL_REG, SUN6I_DSI_CTL_EN);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL0_REG,
|
|
SUN6I_DSI_BASIC_CTL0_ECC_EN | SUN6I_DSI_BASIC_CTL0_CRC_EN);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_TRANS_START_REG, 10);
|
|
regmap_write(dsi->regs, SUN6I_DSI_TRANS_ZERO_REG, 0);
|
|
|
|
sun6i_dsi_inst_init(dsi, dsi->device);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_DEBUG_DATA_REG, 0xff);
|
|
|
|
delay = sun6i_dsi_get_video_start_delay(dsi, mode);
|
|
regmap_write(dsi->regs, SUN6I_DSI_BASIC_CTL1_REG,
|
|
SUN6I_DSI_BASIC_CTL1_VIDEO_ST_DELAY(delay) |
|
|
SUN6I_DSI_BASIC_CTL1_VIDEO_FILL |
|
|
SUN6I_DSI_BASIC_CTL1_VIDEO_PRECISION |
|
|
SUN6I_DSI_BASIC_CTL1_VIDEO_MODE);
|
|
|
|
sun6i_dsi_setup_burst(dsi, mode);
|
|
sun6i_dsi_setup_inst_loop(dsi, mode);
|
|
sun6i_dsi_setup_format(dsi, mode);
|
|
sun6i_dsi_setup_timings(dsi, mode);
|
|
|
|
phy_init(dsi->dphy);
|
|
|
|
phy_mipi_dphy_get_default_config(mode->clock * 1000,
|
|
mipi_dsi_pixel_format_to_bpp(device->format),
|
|
device->lanes, cfg);
|
|
|
|
phy_set_mode(dsi->dphy, PHY_MODE_MIPI_DPHY);
|
|
phy_configure(dsi->dphy, &opts);
|
|
phy_power_on(dsi->dphy);
|
|
|
|
if (dsi->panel)
|
|
drm_panel_prepare(dsi->panel);
|
|
|
|
/*
|
|
* FIXME: This should be moved after the switch to HS mode.
|
|
*
|
|
* Unfortunately, once in HS mode, it seems like we're not
|
|
* able to send DCS commands anymore, which would prevent any
|
|
* panel to send any DCS command as part as their enable
|
|
* method, which is quite common.
|
|
*
|
|
* I haven't seen any artifact due to that sub-optimal
|
|
* ordering on the panels I've tested it with, so I guess this
|
|
* will do for now, until that IP is better understood.
|
|
*/
|
|
if (dsi->panel)
|
|
drm_panel_enable(dsi->panel);
|
|
|
|
sun6i_dsi_start(dsi, DSI_START_HSC);
|
|
|
|
udelay(1000);
|
|
|
|
sun6i_dsi_start(dsi, DSI_START_HSD);
|
|
}
|
|
|
|
static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct sun6i_dsi *dsi = encoder_to_sun6i_dsi(encoder);
|
|
|
|
DRM_DEBUG_DRIVER("Disabling DSI output\n");
|
|
|
|
if (dsi->panel) {
|
|
drm_panel_disable(dsi->panel);
|
|
drm_panel_unprepare(dsi->panel);
|
|
}
|
|
|
|
phy_power_off(dsi->dphy);
|
|
phy_exit(dsi->dphy);
|
|
|
|
clk_disable_unprepare(dsi->mod_clk);
|
|
reset_control_assert(dsi->reset);
|
|
regulator_disable(dsi->regulator);
|
|
}
|
|
|
|
static int sun6i_dsi_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct sun6i_dsi *dsi = connector_to_sun6i_dsi(connector);
|
|
|
|
return drm_panel_get_modes(dsi->panel, connector);
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs sun6i_dsi_connector_helper_funcs = {
|
|
.get_modes = sun6i_dsi_get_modes,
|
|
};
|
|
|
|
static enum drm_connector_status
|
|
sun6i_dsi_connector_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
struct sun6i_dsi *dsi = connector_to_sun6i_dsi(connector);
|
|
|
|
return dsi->panel ? connector_status_connected :
|
|
connector_status_disconnected;
|
|
}
|
|
|
|
static const struct drm_connector_funcs sun6i_dsi_connector_funcs = {
|
|
.detect = sun6i_dsi_connector_detect,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.destroy = drm_connector_cleanup,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static const struct drm_encoder_helper_funcs sun6i_dsi_enc_helper_funcs = {
|
|
.disable = sun6i_dsi_encoder_disable,
|
|
.enable = sun6i_dsi_encoder_enable,
|
|
};
|
|
|
|
static u32 sun6i_dsi_dcs_build_pkt_hdr(struct sun6i_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
u32 pkt = msg->type;
|
|
|
|
if (msg->type == MIPI_DSI_DCS_LONG_WRITE) {
|
|
pkt |= ((msg->tx_len) & 0xffff) << 8;
|
|
pkt |= (((msg->tx_len) >> 8) & 0xffff) << 16;
|
|
} else {
|
|
pkt |= (((u8 *)msg->tx_buf)[0] << 8);
|
|
if (msg->tx_len > 1)
|
|
pkt |= (((u8 *)msg->tx_buf)[1] << 16);
|
|
}
|
|
|
|
pkt |= sun6i_dsi_ecc_compute(pkt) << 24;
|
|
|
|
return pkt;
|
|
}
|
|
|
|
static int sun6i_dsi_dcs_write_short(struct sun6i_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(0),
|
|
sun6i_dsi_dcs_build_pkt_hdr(dsi, msg));
|
|
regmap_write_bits(dsi->regs, SUN6I_DSI_CMD_CTL_REG,
|
|
0xff, (4 - 1));
|
|
|
|
sun6i_dsi_start(dsi, DSI_START_LPTX);
|
|
|
|
return msg->tx_len;
|
|
}
|
|
|
|
static int sun6i_dsi_dcs_write_long(struct sun6i_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
int ret, len = 0;
|
|
u8 *bounce;
|
|
u16 crc;
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(0),
|
|
sun6i_dsi_dcs_build_pkt_hdr(dsi, msg));
|
|
|
|
bounce = kzalloc(ALIGN(msg->tx_len + sizeof(crc), 4), GFP_KERNEL);
|
|
if (!bounce)
|
|
return -ENOMEM;
|
|
|
|
memcpy(bounce, msg->tx_buf, msg->tx_len);
|
|
len += msg->tx_len;
|
|
|
|
crc = sun6i_dsi_crc_compute(bounce, msg->tx_len);
|
|
memcpy((u8 *)bounce + msg->tx_len, &crc, sizeof(crc));
|
|
len += sizeof(crc);
|
|
|
|
regmap_bulk_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(1), bounce, DIV_ROUND_UP(len, 4));
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_CTL_REG, len + 4 - 1);
|
|
kfree(bounce);
|
|
|
|
sun6i_dsi_start(dsi, DSI_START_LPTX);
|
|
|
|
ret = sun6i_dsi_inst_wait_for_completion(dsi);
|
|
if (ret < 0) {
|
|
sun6i_dsi_inst_abort(dsi);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* TODO: There's some bits (reg 0x200, bits 8/9) that
|
|
* apparently can be used to check whether the data have been
|
|
* sent, but I couldn't get it to work reliably.
|
|
*/
|
|
return msg->tx_len;
|
|
}
|
|
|
|
static int sun6i_dsi_dcs_read(struct sun6i_dsi *dsi,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
u8 byte0;
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_TX_REG(0),
|
|
sun6i_dsi_dcs_build_pkt_hdr(dsi, msg));
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_CTL_REG,
|
|
(4 - 1));
|
|
|
|
sun6i_dsi_start(dsi, DSI_START_LPRX);
|
|
|
|
ret = sun6i_dsi_inst_wait_for_completion(dsi);
|
|
if (ret < 0) {
|
|
sun6i_dsi_inst_abort(dsi);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* TODO: There's some bits (reg 0x200, bits 24/25) that
|
|
* apparently can be used to check whether the data have been
|
|
* received, but I couldn't get it to work reliably.
|
|
*/
|
|
regmap_read(dsi->regs, SUN6I_DSI_CMD_CTL_REG, &val);
|
|
if (val & SUN6I_DSI_CMD_CTL_RX_OVERFLOW)
|
|
return -EIO;
|
|
|
|
regmap_read(dsi->regs, SUN6I_DSI_CMD_RX_REG(0), &val);
|
|
byte0 = val & 0xff;
|
|
if (byte0 == MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT)
|
|
return -EIO;
|
|
|
|
((u8 *)msg->rx_buf)[0] = (val >> 8);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int sun6i_dsi_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
|
|
struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
|
|
|
|
if (IS_ERR(panel))
|
|
return PTR_ERR(panel);
|
|
if (!dsi->drm || !dsi->drm->registered)
|
|
return -EPROBE_DEFER;
|
|
|
|
dsi->panel = panel;
|
|
dsi->device = device;
|
|
|
|
drm_kms_helper_hotplug_event(dsi->drm);
|
|
|
|
dev_info(host->dev, "Attached device %s\n", device->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun6i_dsi_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
|
|
|
|
dsi->panel = NULL;
|
|
dsi->device = NULL;
|
|
|
|
drm_kms_helper_hotplug_event(dsi->drm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t sun6i_dsi_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
|
|
int ret;
|
|
|
|
ret = sun6i_dsi_inst_wait_for_completion(dsi);
|
|
if (ret < 0)
|
|
sun6i_dsi_inst_abort(dsi);
|
|
|
|
regmap_write(dsi->regs, SUN6I_DSI_CMD_CTL_REG,
|
|
SUN6I_DSI_CMD_CTL_RX_OVERFLOW |
|
|
SUN6I_DSI_CMD_CTL_RX_FLAG |
|
|
SUN6I_DSI_CMD_CTL_TX_FLAG);
|
|
|
|
switch (msg->type) {
|
|
case MIPI_DSI_DCS_SHORT_WRITE:
|
|
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
|
|
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
|
|
ret = sun6i_dsi_dcs_write_short(dsi, msg);
|
|
break;
|
|
|
|
case MIPI_DSI_DCS_LONG_WRITE:
|
|
ret = sun6i_dsi_dcs_write_long(dsi, msg);
|
|
break;
|
|
|
|
case MIPI_DSI_DCS_READ:
|
|
if (msg->rx_len == 1) {
|
|
ret = sun6i_dsi_dcs_read(dsi, msg);
|
|
break;
|
|
}
|
|
fallthrough;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops sun6i_dsi_host_ops = {
|
|
.attach = sun6i_dsi_attach,
|
|
.detach = sun6i_dsi_detach,
|
|
.transfer = sun6i_dsi_transfer,
|
|
};
|
|
|
|
static const struct regmap_config sun6i_dsi_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = SUN6I_DSI_CMD_TX_REG(255),
|
|
.name = "mipi-dsi",
|
|
};
|
|
|
|
static int sun6i_dsi_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct drm_device *drm = data;
|
|
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
drm_encoder_helper_add(&dsi->encoder,
|
|
&sun6i_dsi_enc_helper_funcs);
|
|
ret = drm_simple_encoder_init(drm, &dsi->encoder,
|
|
DRM_MODE_ENCODER_DSI);
|
|
if (ret) {
|
|
dev_err(dsi->dev, "Couldn't initialise the DSI encoder\n");
|
|
return ret;
|
|
}
|
|
dsi->encoder.possible_crtcs = BIT(0);
|
|
|
|
drm_connector_helper_add(&dsi->connector,
|
|
&sun6i_dsi_connector_helper_funcs);
|
|
ret = drm_connector_init(drm, &dsi->connector,
|
|
&sun6i_dsi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
if (ret) {
|
|
dev_err(dsi->dev,
|
|
"Couldn't initialise the DSI connector\n");
|
|
goto err_cleanup_connector;
|
|
}
|
|
|
|
drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
|
|
|
|
dsi->drm = drm;
|
|
|
|
return 0;
|
|
|
|
err_cleanup_connector:
|
|
drm_encoder_cleanup(&dsi->encoder);
|
|
return ret;
|
|
}
|
|
|
|
static void sun6i_dsi_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
|
|
|
|
dsi->drm = NULL;
|
|
}
|
|
|
|
static const struct component_ops sun6i_dsi_ops = {
|
|
.bind = sun6i_dsi_bind,
|
|
.unbind = sun6i_dsi_unbind,
|
|
};
|
|
|
|
static int sun6i_dsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const char *bus_clk_name = NULL;
|
|
struct sun6i_dsi *dsi;
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
dev_set_drvdata(dev, dsi);
|
|
dsi->dev = dev;
|
|
dsi->host.ops = &sun6i_dsi_host_ops;
|
|
dsi->host.dev = dev;
|
|
|
|
if (of_device_is_compatible(dev->of_node,
|
|
"allwinner,sun6i-a31-mipi-dsi"))
|
|
bus_clk_name = "bus";
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base)) {
|
|
dev_err(dev, "Couldn't map the DSI encoder registers\n");
|
|
return PTR_ERR(base);
|
|
}
|
|
|
|
dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
|
|
if (IS_ERR(dsi->regulator))
|
|
return dev_err_probe(dev, PTR_ERR(dsi->regulator),
|
|
"Couldn't get VCC-DSI supply\n");
|
|
|
|
dsi->reset = devm_reset_control_get_shared(dev, NULL);
|
|
if (IS_ERR(dsi->reset)) {
|
|
dev_err(dev, "Couldn't get our reset line\n");
|
|
return PTR_ERR(dsi->reset);
|
|
}
|
|
|
|
dsi->regs = devm_regmap_init_mmio(dev, base, &sun6i_dsi_regmap_config);
|
|
if (IS_ERR(dsi->regs)) {
|
|
dev_err(dev, "Couldn't init regmap\n");
|
|
return PTR_ERR(dsi->regs);
|
|
}
|
|
|
|
dsi->bus_clk = devm_clk_get(dev, bus_clk_name);
|
|
if (IS_ERR(dsi->bus_clk))
|
|
return dev_err_probe(dev, PTR_ERR(dsi->bus_clk),
|
|
"Couldn't get the DSI bus clock\n");
|
|
|
|
ret = regmap_mmio_attach_clk(dsi->regs, dsi->bus_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (of_device_is_compatible(dev->of_node,
|
|
"allwinner,sun6i-a31-mipi-dsi")) {
|
|
dsi->mod_clk = devm_clk_get(dev, "mod");
|
|
if (IS_ERR(dsi->mod_clk)) {
|
|
dev_err(dev, "Couldn't get the DSI mod clock\n");
|
|
ret = PTR_ERR(dsi->mod_clk);
|
|
goto err_attach_clk;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* In order to operate properly, that clock seems to be always
|
|
* set to 297MHz.
|
|
*/
|
|
clk_set_rate_exclusive(dsi->mod_clk, 297000000);
|
|
|
|
dsi->dphy = devm_phy_get(dev, "dphy");
|
|
if (IS_ERR(dsi->dphy)) {
|
|
dev_err(dev, "Couldn't get the MIPI D-PHY\n");
|
|
ret = PTR_ERR(dsi->dphy);
|
|
goto err_unprotect_clk;
|
|
}
|
|
|
|
ret = mipi_dsi_host_register(&dsi->host);
|
|
if (ret) {
|
|
dev_err(dev, "Couldn't register MIPI-DSI host\n");
|
|
goto err_unprotect_clk;
|
|
}
|
|
|
|
ret = component_add(&pdev->dev, &sun6i_dsi_ops);
|
|
if (ret) {
|
|
dev_err(dev, "Couldn't register our component\n");
|
|
goto err_remove_dsi_host;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_remove_dsi_host:
|
|
mipi_dsi_host_unregister(&dsi->host);
|
|
err_unprotect_clk:
|
|
clk_rate_exclusive_put(dsi->mod_clk);
|
|
err_attach_clk:
|
|
regmap_mmio_detach_clk(dsi->regs);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sun6i_dsi_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
|
|
|
|
component_del(&pdev->dev, &sun6i_dsi_ops);
|
|
mipi_dsi_host_unregister(&dsi->host);
|
|
clk_rate_exclusive_put(dsi->mod_clk);
|
|
|
|
regmap_mmio_detach_clk(dsi->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun6i_dsi_of_table[] = {
|
|
{ .compatible = "allwinner,sun6i-a31-mipi-dsi" },
|
|
{ .compatible = "allwinner,sun50i-a64-mipi-dsi" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun6i_dsi_of_table);
|
|
|
|
static struct platform_driver sun6i_dsi_platform_driver = {
|
|
.probe = sun6i_dsi_probe,
|
|
.remove = sun6i_dsi_remove,
|
|
.driver = {
|
|
.name = "sun6i-mipi-dsi",
|
|
.of_match_table = sun6i_dsi_of_table,
|
|
},
|
|
};
|
|
module_platform_driver(sun6i_dsi_platform_driver);
|
|
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Allwinner A31 DSI Driver");
|
|
MODULE_LICENSE("GPL");
|