376 lines
10 KiB
C
376 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Xinpeng xpp055c272 5.5" MIPI-DSI panel driver
|
|
* Copyright (C) 2019 Theobroma Systems Design und Consulting GmbH
|
|
*
|
|
* based on
|
|
*
|
|
* Rockteck jh057n00900 5.5" MIPI-DSI panel driver
|
|
* Copyright (C) Purism SPC 2019
|
|
*/
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include <video/display_timing.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/media-bus-format.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* Manufacturer specific Commands send via DSI */
|
|
#define XPP055C272_CMD_ALL_PIXEL_OFF 0x22
|
|
#define XPP055C272_CMD_ALL_PIXEL_ON 0x23
|
|
#define XPP055C272_CMD_SETDISP 0xb2
|
|
#define XPP055C272_CMD_SETRGBIF 0xb3
|
|
#define XPP055C272_CMD_SETCYC 0xb4
|
|
#define XPP055C272_CMD_SETBGP 0xb5
|
|
#define XPP055C272_CMD_SETVCOM 0xb6
|
|
#define XPP055C272_CMD_SETOTP 0xb7
|
|
#define XPP055C272_CMD_SETPOWER_EXT 0xb8
|
|
#define XPP055C272_CMD_SETEXTC 0xb9
|
|
#define XPP055C272_CMD_SETMIPI 0xbA
|
|
#define XPP055C272_CMD_SETVDC 0xbc
|
|
#define XPP055C272_CMD_SETPCR 0xbf
|
|
#define XPP055C272_CMD_SETSCR 0xc0
|
|
#define XPP055C272_CMD_SETPOWER 0xc1
|
|
#define XPP055C272_CMD_SETECO 0xc6
|
|
#define XPP055C272_CMD_SETPANEL 0xcc
|
|
#define XPP055C272_CMD_SETGAMMA 0xe0
|
|
#define XPP055C272_CMD_SETEQ 0xe3
|
|
#define XPP055C272_CMD_SETGIP1 0xe9
|
|
#define XPP055C272_CMD_SETGIP2 0xea
|
|
|
|
struct xpp055c272 {
|
|
struct device *dev;
|
|
struct drm_panel panel;
|
|
struct gpio_desc *reset_gpio;
|
|
struct regulator *vci;
|
|
struct regulator *iovcc;
|
|
bool prepared;
|
|
};
|
|
|
|
static inline struct xpp055c272 *panel_to_xpp055c272(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct xpp055c272, panel);
|
|
}
|
|
|
|
#define dsi_generic_write_seq(dsi, cmd, seq...) do { \
|
|
static const u8 b[] = { cmd, seq }; \
|
|
int ret; \
|
|
ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \
|
|
if (ret < 0) \
|
|
return ret; \
|
|
} while (0)
|
|
|
|
static int xpp055c272_init_sequence(struct xpp055c272 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
struct device *dev = ctx->dev;
|
|
|
|
/*
|
|
* Init sequence was supplied by the panel vendor without much
|
|
* documentation.
|
|
*/
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEXTC, 0xf1, 0x12, 0x83);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETMIPI,
|
|
0x33, 0x81, 0x05, 0xf9, 0x0e, 0x0e, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x44, 0x25,
|
|
0x00, 0x91, 0x0a, 0x00, 0x00, 0x02, 0x4f, 0x01,
|
|
0x00, 0x00, 0x37);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER_EXT, 0x25);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPCR, 0x02, 0x11, 0x00);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETRGBIF,
|
|
0x0c, 0x10, 0x0a, 0x50, 0x03, 0xff, 0x00, 0x00,
|
|
0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETSCR,
|
|
0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
|
|
0x00);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVDC, 0x46);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPANEL, 0x0b);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETCYC, 0x80);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETDISP, 0xc8, 0x12, 0x30);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETEQ,
|
|
0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
|
|
0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETPOWER,
|
|
0x53, 0x00, 0x1e, 0x1e, 0x77, 0xe1, 0xcc, 0xdd,
|
|
0x67, 0x77, 0x33, 0x33);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETECO, 0x00, 0x00, 0xff,
|
|
0xff, 0x01, 0xff);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETBGP, 0x09, 0x09);
|
|
msleep(20);
|
|
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETVCOM, 0x87, 0x95);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP1,
|
|
0xc2, 0x10, 0x05, 0x05, 0x10, 0x05, 0xa0, 0x12,
|
|
0x31, 0x23, 0x3f, 0x81, 0x0a, 0xa0, 0x37, 0x18,
|
|
0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x80,
|
|
0x01, 0x00, 0x00, 0x00, 0x48, 0xf8, 0x86, 0x42,
|
|
0x08, 0x88, 0x88, 0x80, 0x88, 0x88, 0x88, 0x58,
|
|
0xf8, 0x87, 0x53, 0x18, 0x88, 0x88, 0x81, 0x88,
|
|
0x88, 0x88, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGIP2,
|
|
0x00, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x1f, 0x88, 0x81, 0x35,
|
|
0x78, 0x88, 0x88, 0x85, 0x88, 0x88, 0x88, 0x0f,
|
|
0x88, 0x80, 0x24, 0x68, 0x88, 0x88, 0x84, 0x88,
|
|
0x88, 0x88, 0x23, 0x10, 0x00, 0x00, 0x1c, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x05,
|
|
0xa0, 0x00, 0x00, 0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, XPP055C272_CMD_SETGAMMA,
|
|
0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38, 0x36,
|
|
0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13, 0x11,
|
|
0x18, 0x00, 0x06, 0x08, 0x2a, 0x31, 0x3f, 0x38,
|
|
0x36, 0x07, 0x0c, 0x0d, 0x11, 0x13, 0x12, 0x13,
|
|
0x11, 0x18);
|
|
|
|
msleep(60);
|
|
|
|
dev_dbg(dev, "Panel init sequence done\n");
|
|
return 0;
|
|
}
|
|
|
|
static int xpp055c272_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int ret;
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "failed to set display off: %d\n", ret);
|
|
|
|
mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regulator_disable(ctx->iovcc);
|
|
regulator_disable(ctx->vci);
|
|
|
|
ctx->prepared = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int xpp055c272_prepare(struct drm_panel *panel)
|
|
{
|
|
struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
dev_dbg(ctx->dev, "Resetting the panel\n");
|
|
ret = regulator_enable(ctx->vci);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = regulator_enable(ctx->iovcc);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
|
|
goto disable_vci;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
/* T6: 10us */
|
|
usleep_range(10, 20);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
|
|
/* T8: 20ms */
|
|
msleep(20);
|
|
|
|
ret = xpp055c272_init_sequence(ctx);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
|
|
goto disable_iovcc;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
|
|
goto disable_iovcc;
|
|
}
|
|
|
|
/* T9: 120ms */
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0) {
|
|
dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
|
|
goto disable_iovcc;
|
|
}
|
|
|
|
msleep(50);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
|
|
disable_iovcc:
|
|
regulator_disable(ctx->iovcc);
|
|
disable_vci:
|
|
regulator_disable(ctx->vci);
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_display_mode default_mode = {
|
|
.hdisplay = 720,
|
|
.hsync_start = 720 + 40,
|
|
.hsync_end = 720 + 40 + 10,
|
|
.htotal = 720 + 40 + 10 + 40,
|
|
.vdisplay = 1280,
|
|
.vsync_start = 1280 + 22,
|
|
.vsync_end = 1280 + 22 + 4,
|
|
.vtotal = 1280 + 22 + 4 + 11,
|
|
.clock = 64000,
|
|
.width_mm = 68,
|
|
.height_mm = 121,
|
|
};
|
|
|
|
static int xpp055c272_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct xpp055c272 *ctx = panel_to_xpp055c272(panel);
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &default_mode);
|
|
if (!mode) {
|
|
dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
|
default_mode.hdisplay, default_mode.vdisplay,
|
|
drm_mode_vrefresh(&default_mode));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs xpp055c272_funcs = {
|
|
.unprepare = xpp055c272_unprepare,
|
|
.prepare = xpp055c272_prepare,
|
|
.get_modes = xpp055c272_get_modes,
|
|
};
|
|
|
|
static int xpp055c272_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct xpp055c272 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
|
|
"cannot get reset gpio\n");
|
|
|
|
ctx->vci = devm_regulator_get(dev, "vci");
|
|
if (IS_ERR(ctx->vci))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->vci),
|
|
"Failed to request vci regulator\n");
|
|
|
|
ctx->iovcc = devm_regulator_get(dev, "iovcc");
|
|
if (IS_ERR(ctx->iovcc))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->iovcc),
|
|
"Failed to request iovcc regulator\n");
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->dev = dev;
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
|
|
|
|
drm_panel_init(&ctx->panel, &dsi->dev, &xpp055c272_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
ret = drm_panel_of_backlight(&ctx->panel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void xpp055c272_shutdown(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = drm_panel_unprepare(&ctx->panel);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
|
|
|
|
ret = drm_panel_disable(&ctx->panel);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
|
|
}
|
|
|
|
static void xpp055c272_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct xpp055c272 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
xpp055c272_shutdown(dsi);
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id xpp055c272_of_match[] = {
|
|
{ .compatible = "xinpeng,xpp055c272" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xpp055c272_of_match);
|
|
|
|
static struct mipi_dsi_driver xpp055c272_driver = {
|
|
.driver = {
|
|
.name = "panel-xinpeng-xpp055c272",
|
|
.of_match_table = xpp055c272_of_match,
|
|
},
|
|
.probe = xpp055c272_probe,
|
|
.remove = xpp055c272_remove,
|
|
.shutdown = xpp055c272_shutdown,
|
|
};
|
|
module_mipi_dsi_driver(xpp055c272_driver);
|
|
|
|
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
|
|
MODULE_DESCRIPTION("DRM driver for Xinpeng xpp055c272 MIPI DSI panel");
|
|
MODULE_LICENSE("GPL v2");
|