464 lines
16 KiB
C
464 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Marvell PXA3xxx family clocks
|
|
*
|
|
* Copyright (C) 2014 Robert Jarzmik
|
|
*
|
|
* Heavily inspired from former arch/arm/mach-pxa/pxa3xx.c
|
|
*
|
|
* For non-devicetree platforms. Once pxa is fully converted to devicetree, this
|
|
* should go away.
|
|
*/
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/of.h>
|
|
#include <linux/soc/pxa/cpu.h>
|
|
#include <linux/soc/pxa/smemc.h>
|
|
#include <linux/clk/pxa.h>
|
|
|
|
#include <dt-bindings/clock/pxa-clock.h>
|
|
#include "clk-pxa.h"
|
|
|
|
#define KHz 1000
|
|
#define MHz (1000 * 1000)
|
|
|
|
#define ACCR (0x0000) /* Application Subsystem Clock Configuration Register */
|
|
#define ACSR (0x0004) /* Application Subsystem Clock Status Register */
|
|
#define AICSR (0x0008) /* Application Subsystem Interrupt Control/Status Register */
|
|
#define CKENA (0x000C) /* A Clock Enable Register */
|
|
#define CKENB (0x0010) /* B Clock Enable Register */
|
|
#define CKENC (0x0024) /* C Clock Enable Register */
|
|
#define AC97_DIV (0x0014) /* AC97 clock divisor value register */
|
|
|
|
#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */
|
|
#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */
|
|
#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */
|
|
#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */
|
|
#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */
|
|
|
|
#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */
|
|
#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */
|
|
#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */
|
|
#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */
|
|
#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */
|
|
#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */
|
|
#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */
|
|
|
|
#define ACCR_SMCFS(x) (((x) & 0x7) << 23)
|
|
#define ACCR_SFLFS(x) (((x) & 0x3) << 18)
|
|
#define ACCR_XSPCLK(x) (((x) & 0x3) << 16)
|
|
#define ACCR_HSS(x) (((x) & 0x3) << 14)
|
|
#define ACCR_DMCFS(x) (((x) & 0x3) << 12)
|
|
#define ACCR_XN(x) (((x) & 0x7) << 8)
|
|
#define ACCR_XL(x) ((x) & 0x1f)
|
|
|
|
/*
|
|
* Clock Enable Bit
|
|
*/
|
|
#define CKEN_LCD 1 /* < LCD Clock Enable */
|
|
#define CKEN_USBH 2 /* < USB host clock enable */
|
|
#define CKEN_CAMERA 3 /* < Camera interface clock enable */
|
|
#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */
|
|
#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */
|
|
#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */
|
|
#define CKEN_SMC 9 /* < Static Memory Controller clock enable */
|
|
#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */
|
|
#define CKEN_BOOT 11 /* < Boot rom clock enable */
|
|
#define CKEN_MMC1 12 /* < MMC1 Clock enable */
|
|
#define CKEN_MMC2 13 /* < MMC2 clock enable */
|
|
#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */
|
|
#define CKEN_CIR 15 /* < Consumer IR Clock Enable */
|
|
#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */
|
|
#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */
|
|
#define CKEN_TPM 19 /* < TPM clock enable */
|
|
#define CKEN_UDC 20 /* < UDC clock enable */
|
|
#define CKEN_BTUART 21 /* < BTUART clock enable */
|
|
#define CKEN_FFUART 22 /* < FFUART clock enable */
|
|
#define CKEN_STUART 23 /* < STUART clock enable */
|
|
#define CKEN_AC97 24 /* < AC97 clock enable */
|
|
#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */
|
|
#define CKEN_SSP1 26 /* < SSP1 clock enable */
|
|
#define CKEN_SSP2 27 /* < SSP2 clock enable */
|
|
#define CKEN_SSP3 28 /* < SSP3 clock enable */
|
|
#define CKEN_SSP4 29 /* < SSP4 clock enable */
|
|
#define CKEN_MSL0 30 /* < MSL0 clock enable */
|
|
#define CKEN_PWM0 32 /* < PWM[0] clock enable */
|
|
#define CKEN_PWM1 33 /* < PWM[1] clock enable */
|
|
#define CKEN_I2C 36 /* < I2C clock enable */
|
|
#define CKEN_INTC 38 /* < Interrupt controller clock enable */
|
|
#define CKEN_GPIO 39 /* < GPIO clock enable */
|
|
#define CKEN_1WIRE 40 /* < 1-wire clock enable */
|
|
#define CKEN_HSIO2 41 /* < HSIO2 clock enable */
|
|
#define CKEN_MINI_IM 48 /* < Mini-IM */
|
|
#define CKEN_MINI_LCD 49 /* < Mini LCD */
|
|
|
|
#define CKEN_MMC3 5 /* < MMC3 Clock Enable */
|
|
#define CKEN_MVED 43 /* < MVED clock enable */
|
|
|
|
/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
|
|
#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
|
|
#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
|
|
|
|
|
|
enum {
|
|
PXA_CORE_60Mhz = 0,
|
|
PXA_CORE_RUN,
|
|
PXA_CORE_TURBO,
|
|
};
|
|
|
|
enum {
|
|
PXA_BUS_60Mhz = 0,
|
|
PXA_BUS_HSS,
|
|
};
|
|
|
|
/* crystal frequency to HSIO bus frequency multiplier (HSS) */
|
|
static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
|
|
|
|
/* crystal frequency to static memory controller multiplier (SMCFS) */
|
|
static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
|
|
static const char * const get_freq_khz[] = {
|
|
"core", "ring_osc_60mhz", "run", "cpll", "system_bus"
|
|
};
|
|
|
|
static void __iomem *clk_regs;
|
|
|
|
/*
|
|
* Get the clock frequency as reflected by ACSR and the turbo flag.
|
|
* We assume these values have been applied via a fcs.
|
|
* If info is not 0 we also display the current settings.
|
|
*/
|
|
unsigned int pxa3xx_get_clk_frequency_khz(int info)
|
|
{
|
|
struct clk *clk;
|
|
unsigned long clks[5];
|
|
int i;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
clk = clk_get(NULL, get_freq_khz[i]);
|
|
if (IS_ERR(clk)) {
|
|
clks[i] = 0;
|
|
} else {
|
|
clks[i] = clk_get_rate(clk);
|
|
clk_put(clk);
|
|
}
|
|
}
|
|
if (info) {
|
|
pr_info("RO Mode clock: %ld.%02ldMHz\n",
|
|
clks[1] / 1000000, (clks[0] % 1000000) / 10000);
|
|
pr_info("Run Mode clock: %ld.%02ldMHz\n",
|
|
clks[2] / 1000000, (clks[1] % 1000000) / 10000);
|
|
pr_info("Turbo Mode clock: %ld.%02ldMHz\n",
|
|
clks[3] / 1000000, (clks[2] % 1000000) / 10000);
|
|
pr_info("System bus clock: %ld.%02ldMHz\n",
|
|
clks[4] / 1000000, (clks[4] % 1000000) / 10000);
|
|
}
|
|
return (unsigned int)clks[0] / KHz;
|
|
}
|
|
|
|
void pxa3xx_clk_update_accr(u32 disable, u32 enable, u32 xclkcfg, u32 mask)
|
|
{
|
|
u32 accr = readl(clk_regs + ACCR);
|
|
|
|
accr &= ~disable;
|
|
accr |= enable;
|
|
|
|
writel(accr, clk_regs + ACCR);
|
|
if (xclkcfg)
|
|
__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
|
|
|
|
while ((readl(clk_regs + ACSR) & mask) != (accr & mask))
|
|
cpu_relax();
|
|
}
|
|
|
|
static unsigned long clk_pxa3xx_ac97_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long ac97_div, rate;
|
|
|
|
ac97_div = readl(clk_regs + AC97_DIV);
|
|
|
|
/* This may loose precision for some rates but won't for the
|
|
* standard 24.576MHz.
|
|
*/
|
|
rate = parent_rate / 2;
|
|
rate /= ((ac97_div >> 12) & 0x7fff);
|
|
rate *= (ac97_div & 0xfff);
|
|
|
|
return rate;
|
|
}
|
|
PARENTS(clk_pxa3xx_ac97) = { "spll_624mhz" };
|
|
RATE_RO_OPS(clk_pxa3xx_ac97, "ac97");
|
|
|
|
static unsigned long clk_pxa3xx_smemc_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long acsr = readl(clk_regs + ACSR);
|
|
|
|
return (parent_rate / 48) * smcfs_mult[(acsr >> 23) & 0x7] /
|
|
pxa3xx_smemc_get_memclkdiv();
|
|
|
|
}
|
|
PARENTS(clk_pxa3xx_smemc) = { "spll_624mhz" };
|
|
RATE_RO_OPS(clk_pxa3xx_smemc, "smemc");
|
|
|
|
static bool pxa3xx_is_ring_osc_forced(void)
|
|
{
|
|
unsigned long acsr = readl(clk_regs + ACSR);
|
|
|
|
return acsr & ACCR_D0CS;
|
|
}
|
|
|
|
PARENTS(pxa3xx_pbus) = { "ring_osc_60mhz", "spll_624mhz" };
|
|
PARENTS(pxa3xx_32Khz_bus) = { "osc_32_768khz", "osc_32_768khz" };
|
|
PARENTS(pxa3xx_13MHz_bus) = { "osc_13mhz", "osc_13mhz" };
|
|
PARENTS(pxa3xx_ac97_bus) = { "ring_osc_60mhz", "ac97" };
|
|
PARENTS(pxa3xx_sbus) = { "ring_osc_60mhz", "system_bus" };
|
|
PARENTS(pxa3xx_smemcbus) = { "ring_osc_60mhz", "smemc" };
|
|
|
|
#define CKEN_AB(bit) ((CKEN_ ## bit > 31) ? CKENB : CKENA)
|
|
#define PXA3XX_CKEN(dev_id, con_id, parents, mult_lp, div_lp, mult_hp, \
|
|
div_hp, bit, is_lp, flags) \
|
|
PXA_CKEN(dev_id, con_id, bit, parents, mult_lp, div_lp, \
|
|
mult_hp, div_hp, is_lp, CKEN_AB(bit), \
|
|
(CKEN_ ## bit % 32), flags)
|
|
#define PXA3XX_PBUS_CKEN(dev_id, con_id, bit, mult_lp, div_lp, \
|
|
mult_hp, div_hp, delay) \
|
|
PXA3XX_CKEN(dev_id, con_id, pxa3xx_pbus_parents, mult_lp, \
|
|
div_lp, mult_hp, div_hp, bit, pxa3xx_is_ring_osc_forced, 0)
|
|
#define PXA3XX_CKEN_1RATE(dev_id, con_id, bit, parents) \
|
|
PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \
|
|
CKEN_AB(bit), (CKEN_ ## bit % 32), 0)
|
|
|
|
static struct desc_clk_cken pxa3xx_clocks[] __initdata = {
|
|
PXA3XX_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 1, 4, 1, 42, 1),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 1, 4, 1, 42, 1),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 1, 4, 1, 42, 1),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 5, 1, 19, 0),
|
|
PXA3XX_PBUS_CKEN("pxa27x-udc", NULL, UDC, 1, 4, 1, 13, 5),
|
|
PXA3XX_PBUS_CKEN("pxa27x-ohci", NULL, USBH, 1, 4, 1, 13, 0),
|
|
PXA3XX_PBUS_CKEN("pxa3xx-u2d", NULL, USB2, 1, 4, 1, 13, 0),
|
|
PXA3XX_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 6, 1, 48, 0),
|
|
PXA3XX_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 6, 1, 48, 0),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC1, 1, 4, 1, 24, 0),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-mci.1", NULL, MMC2, 1, 4, 1, 24, 0),
|
|
PXA3XX_PBUS_CKEN("pxa2xx-mci.2", NULL, MMC3, 1, 4, 1, 24, 0),
|
|
|
|
PXA3XX_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD,
|
|
pxa3xx_32Khz_bus_parents),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-ssp.0", NULL, SSP1, pxa3xx_13MHz_bus_parents),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-ssp.1", NULL, SSP2, pxa3xx_13MHz_bus_parents),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-ssp.2", NULL, SSP3, pxa3xx_13MHz_bus_parents),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-ssp.3", NULL, SSP4, pxa3xx_13MHz_bus_parents),
|
|
|
|
PXA3XX_CKEN(NULL, "AC97CLK", pxa3xx_ac97_bus_parents, 1, 4, 1, 1, AC97,
|
|
pxa3xx_is_ring_osc_forced, 0),
|
|
PXA3XX_CKEN(NULL, "CAMCLK", pxa3xx_sbus_parents, 1, 2, 1, 1, CAMERA,
|
|
pxa3xx_is_ring_osc_forced, 0),
|
|
PXA3XX_CKEN("pxa2xx-fb", NULL, pxa3xx_sbus_parents, 1, 1, 1, 1, LCD,
|
|
pxa3xx_is_ring_osc_forced, 0),
|
|
PXA3XX_CKEN("pxa2xx-pcmcia", NULL, pxa3xx_smemcbus_parents, 1, 4,
|
|
1, 1, SMC, pxa3xx_is_ring_osc_forced, CLK_IGNORE_UNUSED),
|
|
};
|
|
|
|
static struct desc_clk_cken pxa300_310_clocks[] __initdata = {
|
|
|
|
PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
|
|
PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
|
|
};
|
|
|
|
static struct desc_clk_cken pxa320_clocks[] __initdata = {
|
|
PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 6, 0),
|
|
PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA320_GCU, 1, 1, 1, 1, 0),
|
|
PXA3XX_CKEN_1RATE("pxa3xx-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
|
|
};
|
|
|
|
static struct desc_clk_cken pxa93x_clocks[] __initdata = {
|
|
|
|
PXA3XX_PBUS_CKEN("pxa3xx-gcu", NULL, PXA300_GCU, 1, 1, 1, 1, 0),
|
|
PXA3XX_PBUS_CKEN("pxa3xx-nand", NULL, NAND, 1, 2, 1, 4, 0),
|
|
PXA3XX_CKEN_1RATE("pxa93x-gpio", NULL, GPIO, pxa3xx_13MHz_bus_parents),
|
|
};
|
|
|
|
static unsigned long clk_pxa3xx_system_bus_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long acsr = readl(clk_regs + ACSR);
|
|
unsigned int hss = (acsr >> 14) & 0x3;
|
|
|
|
if (pxa3xx_is_ring_osc_forced())
|
|
return parent_rate;
|
|
return parent_rate / 48 * hss_mult[hss];
|
|
}
|
|
|
|
static u8 clk_pxa3xx_system_bus_get_parent(struct clk_hw *hw)
|
|
{
|
|
if (pxa3xx_is_ring_osc_forced())
|
|
return PXA_BUS_60Mhz;
|
|
else
|
|
return PXA_BUS_HSS;
|
|
}
|
|
|
|
PARENTS(clk_pxa3xx_system_bus) = { "ring_osc_60mhz", "spll_624mhz" };
|
|
MUX_RO_RATE_RO_OPS(clk_pxa3xx_system_bus, "system_bus");
|
|
|
|
static unsigned long clk_pxa3xx_core_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
return parent_rate;
|
|
}
|
|
|
|
static u8 clk_pxa3xx_core_get_parent(struct clk_hw *hw)
|
|
{
|
|
unsigned long xclkcfg;
|
|
unsigned int t;
|
|
|
|
if (pxa3xx_is_ring_osc_forced())
|
|
return PXA_CORE_60Mhz;
|
|
|
|
/* Read XCLKCFG register turbo bit */
|
|
__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
|
|
t = xclkcfg & 0x1;
|
|
|
|
if (t)
|
|
return PXA_CORE_TURBO;
|
|
return PXA_CORE_RUN;
|
|
}
|
|
PARENTS(clk_pxa3xx_core) = { "ring_osc_60mhz", "run", "cpll" };
|
|
MUX_RO_RATE_RO_OPS(clk_pxa3xx_core, "core");
|
|
|
|
static unsigned long clk_pxa3xx_run_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long acsr = readl(clk_regs + ACSR);
|
|
unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
|
|
unsigned int t, xclkcfg;
|
|
|
|
/* Read XCLKCFG register turbo bit */
|
|
__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
|
|
t = xclkcfg & 0x1;
|
|
|
|
return t ? (parent_rate / xn) * 2 : parent_rate;
|
|
}
|
|
PARENTS(clk_pxa3xx_run) = { "cpll" };
|
|
RATE_RO_OPS(clk_pxa3xx_run, "run");
|
|
|
|
static unsigned long clk_pxa3xx_cpll_get_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
unsigned long acsr = readl(clk_regs + ACSR);
|
|
unsigned int xn = (acsr & ACCR_XN_MASK) >> 8;
|
|
unsigned int xl = acsr & ACCR_XL_MASK;
|
|
unsigned int t, xclkcfg;
|
|
|
|
/* Read XCLKCFG register turbo bit */
|
|
__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
|
|
t = xclkcfg & 0x1;
|
|
|
|
pr_info("RJK: parent_rate=%lu, xl=%u, xn=%u\n", parent_rate, xl, xn);
|
|
return t ? parent_rate * xl * xn : parent_rate * xl;
|
|
}
|
|
PARENTS(clk_pxa3xx_cpll) = { "osc_13mhz" };
|
|
RATE_RO_OPS(clk_pxa3xx_cpll, "cpll");
|
|
|
|
static void __init pxa3xx_register_core(void)
|
|
{
|
|
clk_register_clk_pxa3xx_cpll();
|
|
clk_register_clk_pxa3xx_run();
|
|
|
|
clkdev_pxa_register(CLK_CORE, "core", NULL,
|
|
clk_register_clk_pxa3xx_core());
|
|
}
|
|
|
|
static void __init pxa3xx_register_plls(void)
|
|
{
|
|
clk_register_fixed_rate(NULL, "osc_13mhz", NULL,
|
|
CLK_GET_RATE_NOCACHE,
|
|
13 * MHz);
|
|
clkdev_pxa_register(CLK_OSC32k768, "osc_32_768khz", NULL,
|
|
clk_register_fixed_rate(NULL, "osc_32_768khz", NULL,
|
|
CLK_GET_RATE_NOCACHE,
|
|
32768));
|
|
clk_register_fixed_rate(NULL, "ring_osc_120mhz", NULL,
|
|
CLK_GET_RATE_NOCACHE,
|
|
120 * MHz);
|
|
clk_register_fixed_rate(NULL, "clk_dummy", NULL, 0, 0);
|
|
clk_register_fixed_factor(NULL, "spll_624mhz", "osc_13mhz", 0, 48, 1);
|
|
clk_register_fixed_factor(NULL, "ring_osc_60mhz", "ring_osc_120mhz",
|
|
0, 1, 2);
|
|
}
|
|
|
|
#define DUMMY_CLK(_con_id, _dev_id, _parent) \
|
|
{ .con_id = _con_id, .dev_id = _dev_id, .parent = _parent }
|
|
struct dummy_clk {
|
|
const char *con_id;
|
|
const char *dev_id;
|
|
const char *parent;
|
|
};
|
|
static struct dummy_clk dummy_clks[] __initdata = {
|
|
DUMMY_CLK(NULL, "pxa93x-gpio", "osc_13mhz"),
|
|
DUMMY_CLK(NULL, "sa1100-rtc", "osc_32_768khz"),
|
|
DUMMY_CLK("UARTCLK", "pxa2xx-ir", "STUART"),
|
|
DUMMY_CLK(NULL, "pxa3xx-pwri2c.1", "osc_13mhz"),
|
|
};
|
|
|
|
static void __init pxa3xx_dummy_clocks_init(void)
|
|
{
|
|
struct clk *clk;
|
|
struct dummy_clk *d;
|
|
const char *name;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dummy_clks); i++) {
|
|
d = &dummy_clks[i];
|
|
name = d->dev_id ? d->dev_id : d->con_id;
|
|
clk = clk_register_fixed_factor(NULL, name, d->parent, 0, 1, 1);
|
|
clk_register_clkdev(clk, d->con_id, d->dev_id);
|
|
}
|
|
}
|
|
|
|
static void __init pxa3xx_base_clocks_init(void __iomem *oscc_reg)
|
|
{
|
|
struct clk *clk;
|
|
|
|
pxa3xx_register_plls();
|
|
pxa3xx_register_core();
|
|
clk_register_clk_pxa3xx_system_bus();
|
|
clk_register_clk_pxa3xx_ac97();
|
|
clk_register_clk_pxa3xx_smemc();
|
|
clk = clk_register_gate(NULL, "CLK_POUT",
|
|
"osc_13mhz", 0, oscc_reg, 11, 0, NULL);
|
|
clk_register_clkdev(clk, "CLK_POUT", NULL);
|
|
clkdev_pxa_register(CLK_OSTIMER, "OSTIMER0", NULL,
|
|
clk_register_fixed_factor(NULL, "os-timer0",
|
|
"osc_13mhz", 0, 1, 4));
|
|
}
|
|
|
|
int __init pxa3xx_clocks_init(void __iomem *regs, void __iomem *oscc_reg)
|
|
{
|
|
int ret;
|
|
|
|
clk_regs = regs;
|
|
pxa3xx_base_clocks_init(oscc_reg);
|
|
pxa3xx_dummy_clocks_init();
|
|
ret = clk_pxa_cken_init(pxa3xx_clocks, ARRAY_SIZE(pxa3xx_clocks), regs);
|
|
if (ret)
|
|
return ret;
|
|
if (cpu_is_pxa320())
|
|
return clk_pxa_cken_init(pxa320_clocks,
|
|
ARRAY_SIZE(pxa320_clocks), regs);
|
|
if (cpu_is_pxa300() || cpu_is_pxa310())
|
|
return clk_pxa_cken_init(pxa300_310_clocks,
|
|
ARRAY_SIZE(pxa300_310_clocks), regs);
|
|
return clk_pxa_cken_init(pxa93x_clocks, ARRAY_SIZE(pxa93x_clocks), regs);
|
|
}
|
|
|
|
static void __init pxa3xx_dt_clocks_init(struct device_node *np)
|
|
{
|
|
pxa3xx_clocks_init(ioremap(0x41340000, 0x10), ioremap(0x41350000, 4));
|
|
clk_pxa_dt_common_init(np);
|
|
}
|
|
CLK_OF_DECLARE(pxa_clks, "marvell,pxa300-clocks", pxa3xx_dt_clocks_init);
|