linuxdebug/arch/powerpc/include/asm/cacheflush.h

131 lines
3.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
*/
#ifndef _ASM_POWERPC_CACHEFLUSH_H
#define _ASM_POWERPC_CACHEFLUSH_H
#include <linux/mm.h>
#include <asm/cputable.h>
#include <asm/cpu_has_feature.h>
/*
* This flag is used to indicate that the page pointed to by a pte is clean
* and does not require cleaning before returning it to the user.
*/
#define PG_dcache_clean PG_arch_1
#ifdef CONFIG_PPC_BOOK3S_64
/*
* Book3s has no ptesync after setting a pte, so without this ptesync it's
* possible for a kernel virtual mapping access to return a spurious fault
* if it's accessed right after the pte is set. The page fault handler does
* not expect this type of fault. flush_cache_vmap is not exactly the right
* place to put this, but it seems to work well enough.
*/
static inline void flush_cache_vmap(unsigned long start, unsigned long end)
{
asm volatile("ptesync" ::: "memory");
}
#define flush_cache_vmap flush_cache_vmap
#endif /* CONFIG_PPC_BOOK3S_64 */
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
* flush later when the page is given to a user process, if necessary.
*/
static inline void flush_dcache_page(struct page *page)
{
if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
return;
/* avoid an atomic op if possible */
if (test_bit(PG_dcache_clean, &page->flags))
clear_bit(PG_dcache_clean, &page->flags);
}
void flush_icache_range(unsigned long start, unsigned long stop);
#define flush_icache_range flush_icache_range
void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long addr, int len);
#define flush_icache_user_page flush_icache_user_page
void flush_dcache_icache_page(struct page *page);
/**
* flush_dcache_range(): Write any modified data cache blocks out to memory and
* invalidate them. Does not invalidate the corresponding instruction cache
* blocks.
*
* @start: the start address
* @stop: the stop address (exclusive)
*/
static inline void flush_dcache_range(unsigned long start, unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
if (IS_ENABLED(CONFIG_PPC64))
mb(); /* sync */
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbf(addr);
mb(); /* sync */
}
/*
* Write any modified data cache blocks out to memory.
* Does not invalidate the corresponding cache lines (especially for
* any corresponding instruction cache).
*/
static inline void clean_dcache_range(unsigned long start, unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbst(addr);
mb(); /* sync */
}
/*
* Like above, but invalidate the D-cache. This is used by the 8xx
* to invalidate the cache so the PPC core doesn't get stale data
* from the CPM (no cache snooping here :-).
*/
static inline void invalidate_dcache_range(unsigned long start,
unsigned long stop)
{
unsigned long shift = l1_dcache_shift();
unsigned long bytes = l1_dcache_bytes();
void *addr = (void *)(start & ~(bytes - 1));
unsigned long size = stop - (unsigned long)addr + (bytes - 1);
unsigned long i;
for (i = 0; i < size >> shift; i++, addr += bytes)
dcbi(addr);
mb(); /* sync */
}
#ifdef CONFIG_4xx
static inline void flush_instruction_cache(void)
{
iccci((void *)KERNELBASE);
isync();
}
#else
void flush_instruction_cache(void);
#endif
#include <asm-generic/cacheflush.h>
#endif /* _ASM_POWERPC_CACHEFLUSH_H */