296 lines
7.9 KiB
Plaintext
296 lines
7.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree for the ARM Integrator/AP platform
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "integrator.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "ARM Integrator/AP";
|
|
compatible = "arm,integrator-ap";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
/*
|
|
* Since the board has pluggable CPU modules, we
|
|
* cannot define a proper compatible here. Let the
|
|
* boot loader fill in the apropriate compatible
|
|
* string if necessary.
|
|
*/
|
|
/* compatible = "arm,arm926ej-s"; */
|
|
reg = <0>;
|
|
/*
|
|
* The documentation in ARM DUI 0138E page 3-12 states
|
|
* that the maximum frequency for this clock is 200 MHz
|
|
* but painful trial-and-error has proved to me that it
|
|
* is actually just hanging the system above 71 MHz.
|
|
* Sad but true.
|
|
*/
|
|
/* kHz uV */
|
|
operating-points = <71000 0
|
|
66000 0
|
|
60000 0
|
|
48000 0
|
|
36000 0
|
|
24000 0
|
|
12000 0>;
|
|
clocks = <&cmosc>;
|
|
clock-names = "cpu";
|
|
clock-latency = <1000000>; /* 1 ms */
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
arm,timer-primary = &timer2;
|
|
arm,timer-secondary = &timer1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
|
|
};
|
|
|
|
/* 24 MHz chrystal on the Integrator/AP development board */
|
|
xtal24mhz: xtal24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
pclk: pclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* The UART clock is 14.74 MHz divided by an ICS525 */
|
|
uartclk: uartclk@14.74M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <14745600>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
core-module@10000000 {
|
|
/* 24 MHz chrystal on the core module */
|
|
cm24mhz: cm24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
/* Oscillator on the core module, clocks the CPU core */
|
|
cmosc: clock-controller@8 {
|
|
compatible = "arm,syscon-icst525-integratorap-cm";
|
|
reg = <0x08 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x14>;
|
|
vco-offset = <0x08>;
|
|
clocks = <&cm24mhz>;
|
|
};
|
|
|
|
/* Auxilary oscillator on the core module, 32.369MHz at boot */
|
|
auxosc: clock-controller@1c {
|
|
compatible = "arm,syscon-icst525";
|
|
reg = <0x1c 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x14>;
|
|
vco-offset = <0x1c>;
|
|
clocks = <&cm24mhz>;
|
|
};
|
|
};
|
|
|
|
syscon {
|
|
compatible = "arm,integrator-ap-syscon", "syscon";
|
|
reg = <0x11000000 0x100>;
|
|
ranges = <0x0 0x11000000 0x100>;
|
|
#size-cells = <1>;
|
|
#address-cells = <1>;
|
|
|
|
/*
|
|
* SYSCLK clocks PCIv3 bridge, system controller and the
|
|
* logic modules.
|
|
*/
|
|
sysclk: clock-controller@4 {
|
|
compatible = "arm,syscon-icst525-integratorap-sys";
|
|
reg = <0x04 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x1c>;
|
|
vco-offset = <0x04>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* One-bit control for the PCI bus clock (33 or 25 MHz) */
|
|
pciclk: clock-controller@4,8 {
|
|
compatible = "arm,syscon-icst525-integratorap-pci";
|
|
reg = <0x04 0x04>;
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x1c>;
|
|
vco-offset = <0x04>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
};
|
|
|
|
timer0: timer@13000000 {
|
|
compatible = "arm,integrator-timer";
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
timer1: timer@13000100 {
|
|
compatible = "arm,integrator-timer";
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
timer2: timer@13000200 {
|
|
compatible = "arm,integrator-timer";
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
pic: pic@14000000 {
|
|
valid-mask = <0x003fffff>;
|
|
};
|
|
|
|
pci: pciv3@62000000 {
|
|
compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
|
|
device_type = "pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
/* Bridge registers and config access space */
|
|
reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
|
|
interrupt-parent = <&pic>;
|
|
interrupts = <17>; /* Bus error IRQ */
|
|
clocks = <&pciclk>;
|
|
bus-range = <0x00 0xff>;
|
|
ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */
|
|
0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */
|
|
0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
|
|
0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
|
|
0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
|
|
0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
|
|
dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
|
|
0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
|
|
0x02000000 0 0x80000000 /* Core module alias memory */
|
|
0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
|
|
interrupt-map-mask = <0xf800 0 0 0x7>;
|
|
interrupt-map = <
|
|
/* IDSEL 9 */
|
|
0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
|
|
0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
|
|
0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
|
|
0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
|
|
/* IDSEL 10 */
|
|
0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
|
|
0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
|
|
0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
|
|
0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
|
|
/* IDSEL 11 */
|
|
0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
|
|
0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
|
|
0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
|
|
0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
|
|
/* IDSEL 12 */
|
|
0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
|
|
0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
|
|
0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
|
|
0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
|
|
>;
|
|
};
|
|
|
|
fpga {
|
|
/*
|
|
* The Integator/AP predates the idea to have magic numbers
|
|
* identifying the PrimeCell in hardware, thus we have to
|
|
* supply these from the device tree.
|
|
*/
|
|
rtc: rtc@15000000 {
|
|
compatible = "arm,pl030", "arm,primecell";
|
|
arm,primecell-periphid = <0x00041030>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
uart0: uart@16000000 {
|
|
compatible = "arm,pl010", "arm,primecell";
|
|
arm,primecell-periphid = <0x00041010>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
uart1: uart@17000000 {
|
|
compatible = "arm,pl010", "arm,primecell";
|
|
arm,primecell-periphid = <0x00041010>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
kmi0: kmi@18000000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
arm,primecell-periphid = <0x00041050>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
kmi1: kmi@19000000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
arm,primecell-periphid = <0x00041050>;
|
|
clocks = <&xtal24mhz>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
};
|
|
|
|
/*
|
|
* Logic module bus, we support up to 4 logical modules
|
|
* They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
|
|
* and use interrupts 9, 10, 11 and 12 respectively.
|
|
*/
|
|
bus@c0000000 {
|
|
compatible = "arm,integrator-ap-lm";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xc0000000 0xc0000000 0x40000000>;
|
|
dma-ranges;
|
|
|
|
lm0: bus@c0000000 {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xc0000000 0x10000000>;
|
|
dma-ranges = <0x00000000 0xc0000000 0x10000000>;
|
|
reg = <0xc0000000 0x10000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
lm1: bus@d0000000 {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xd0000000 0x10000000>;
|
|
dma-ranges = <0x00000000 0xd0000000 0x10000000>;
|
|
reg = <0xd0000000 0x10000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
lm2: bus@e0000000 {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xe0000000 0x10000000>;
|
|
dma-ranges = <0x00000000 0xe0000000 0x10000000>;
|
|
reg = <0xe0000000 0x10000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
lm3: bus@f0000000 {
|
|
compatible = "simple-bus";
|
|
ranges = <0x00000000 0xf0000000 0x10000000>;
|
|
dma-ranges = <0x00000000 0xf0000000 0x10000000>;
|
|
reg = <0xf0000000 0x10000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|