linuxdebug/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als

57 lines
1.8 KiB
Plaintext

What: /sys/.../events/in_illuminance0_thresh_either_en
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Event generated when channel passes one of the four thresholds
in each direction (rising|falling) and a zone change occurs.
The corresponding light zone can be read from
in_illuminance0_zone.
What: /sys/.../events/in_illuminance0_threshY_hysteresis
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the hysteresis for thresholds Y, that is,
threshY_hysteresis = threshY_raising - threshY_falling
What: /sys/.../events/illuminance_threshY_falling_value
What: /sys/.../events/illuminance_threshY_raising_value
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Specifies the value of threshold that the device is comparing
against for the events enabled by
in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
Note that threshY_falling must be less than or equal to
threshY_raising.
These thresholds correspond to the eight zone-boundary
registers (boundaryY_{low,high}) and define the five light
zones.
What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
Date: April 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Get the current light zone (0..4) as defined by the
in_illuminance0_threshY_{falling,rising} thresholds.
What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
Date: May 2012
KernelVersion: 3.5
Contact: Johan Hovold <jhovold@gmail.com>
Description:
Set the output current for channel out_currentY when in zone
Z (0..255), where Y in 0..2 and Z in 0..4.
These values correspond to the ALS-mapper target registers for
ALS-mapper Y + 1.
Note that out_currentY_raw provides the current for the
current zone.