229 lines
9.0 KiB
C
229 lines
9.0 KiB
C
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
||
|
|
/*
|
||
|
|
* linux/include/asm-arm/hardware/serial_amba.h
|
||
|
|
*
|
||
|
|
* Internal header file for AMBA serial ports
|
||
|
|
*
|
||
|
|
* Copyright (C) ARM Limited
|
||
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
||
|
|
*/
|
||
|
|
#ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H
|
||
|
|
#define ASM_ARM_HARDWARE_SERIAL_AMBA_H
|
||
|
|
|
||
|
|
#include <linux/types.h>
|
||
|
|
|
||
|
|
/* -------------------------------------------------------------------------------
|
||
|
|
* From AMBA UART (PL010) Block Specification
|
||
|
|
* -------------------------------------------------------------------------------
|
||
|
|
* UART Register Offsets.
|
||
|
|
*/
|
||
|
|
#define UART01x_DR 0x00 /* Data read or written from the interface. */
|
||
|
|
#define UART01x_RSR 0x04 /* Receive status register (Read). */
|
||
|
|
#define UART01x_ECR 0x04 /* Error clear register (Write). */
|
||
|
|
#define UART010_LCRH 0x08 /* Line control register, high byte. */
|
||
|
|
#define ST_UART011_DMAWM 0x08 /* DMA watermark configure register. */
|
||
|
|
#define UART010_LCRM 0x0C /* Line control register, middle byte. */
|
||
|
|
#define ST_UART011_TIMEOUT 0x0C /* Timeout period register. */
|
||
|
|
#define UART010_LCRL 0x10 /* Line control register, low byte. */
|
||
|
|
#define UART010_CR 0x14 /* Control register. */
|
||
|
|
#define UART01x_FR 0x18 /* Flag register (Read only). */
|
||
|
|
#define UART010_IIR 0x1C /* Interrupt identification register (Read). */
|
||
|
|
#define UART010_ICR 0x1C /* Interrupt clear register (Write). */
|
||
|
|
#define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */
|
||
|
|
#define UART01x_ILPR 0x20 /* IrDA low power counter register. */
|
||
|
|
#define UART011_IBRD 0x24 /* Integer baud rate divisor register. */
|
||
|
|
#define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */
|
||
|
|
#define UART011_LCRH 0x2c /* Line control register. */
|
||
|
|
#define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */
|
||
|
|
#define UART011_CR 0x30 /* Control register. */
|
||
|
|
#define UART011_IFLS 0x34 /* Interrupt fifo level select. */
|
||
|
|
#define UART011_IMSC 0x38 /* Interrupt mask. */
|
||
|
|
#define UART011_RIS 0x3c /* Raw interrupt status. */
|
||
|
|
#define UART011_MIS 0x40 /* Masked interrupt status. */
|
||
|
|
#define UART011_ICR 0x44 /* Interrupt clear register. */
|
||
|
|
#define UART011_DMACR 0x48 /* DMA control register. */
|
||
|
|
#define ST_UART011_XFCR 0x50 /* XON/XOFF control register. */
|
||
|
|
#define ST_UART011_XON1 0x54 /* XON1 register. */
|
||
|
|
#define ST_UART011_XON2 0x58 /* XON2 register. */
|
||
|
|
#define ST_UART011_XOFF1 0x5C /* XON1 register. */
|
||
|
|
#define ST_UART011_XOFF2 0x60 /* XON2 register. */
|
||
|
|
#define ST_UART011_ITCR 0x80 /* Integration test control register. */
|
||
|
|
#define ST_UART011_ITIP 0x84 /* Integration test input register. */
|
||
|
|
#define ST_UART011_ABCR 0x100 /* Autobaud control register. */
|
||
|
|
#define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* ZTE UART register offsets. This UART has a radically different address
|
||
|
|
* allocation from the ARM and ST variants, so we list all registers here.
|
||
|
|
* We assume unlisted registers do not exist.
|
||
|
|
*/
|
||
|
|
#define ZX_UART011_DR 0x04
|
||
|
|
#define ZX_UART011_FR 0x14
|
||
|
|
#define ZX_UART011_IBRD 0x24
|
||
|
|
#define ZX_UART011_FBRD 0x28
|
||
|
|
#define ZX_UART011_LCRH 0x30
|
||
|
|
#define ZX_UART011_CR 0x34
|
||
|
|
#define ZX_UART011_IFLS 0x38
|
||
|
|
#define ZX_UART011_IMSC 0x40
|
||
|
|
#define ZX_UART011_RIS 0x44
|
||
|
|
#define ZX_UART011_MIS 0x48
|
||
|
|
#define ZX_UART011_ICR 0x4c
|
||
|
|
#define ZX_UART011_DMACR 0x50
|
||
|
|
|
||
|
|
#define UART011_DR_OE (1 << 11)
|
||
|
|
#define UART011_DR_BE (1 << 10)
|
||
|
|
#define UART011_DR_PE (1 << 9)
|
||
|
|
#define UART011_DR_FE (1 << 8)
|
||
|
|
|
||
|
|
#define UART01x_RSR_OE 0x08
|
||
|
|
#define UART01x_RSR_BE 0x04
|
||
|
|
#define UART01x_RSR_PE 0x02
|
||
|
|
#define UART01x_RSR_FE 0x01
|
||
|
|
|
||
|
|
#define UART011_FR_RI 0x100
|
||
|
|
#define UART011_FR_TXFE 0x080
|
||
|
|
#define UART011_FR_RXFF 0x040
|
||
|
|
#define UART01x_FR_TXFF 0x020
|
||
|
|
#define UART01x_FR_RXFE 0x010
|
||
|
|
#define UART01x_FR_BUSY 0x008
|
||
|
|
#define UART01x_FR_DCD 0x004
|
||
|
|
#define UART01x_FR_DSR 0x002
|
||
|
|
#define UART01x_FR_CTS 0x001
|
||
|
|
#define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY)
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Some bits of Flag Register on ZTE device have different position from
|
||
|
|
* standard ones.
|
||
|
|
*/
|
||
|
|
#define ZX_UART01x_FR_BUSY 0x100
|
||
|
|
#define ZX_UART01x_FR_DSR 0x008
|
||
|
|
#define ZX_UART01x_FR_CTS 0x002
|
||
|
|
#define ZX_UART011_FR_RI 0x001
|
||
|
|
|
||
|
|
#define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */
|
||
|
|
#define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */
|
||
|
|
#define UART011_CR_OUT2 0x2000 /* OUT2 */
|
||
|
|
#define UART011_CR_OUT1 0x1000 /* OUT1 */
|
||
|
|
#define UART011_CR_RTS 0x0800 /* RTS */
|
||
|
|
#define UART011_CR_DTR 0x0400 /* DTR */
|
||
|
|
#define UART011_CR_RXE 0x0200 /* receive enable */
|
||
|
|
#define UART011_CR_TXE 0x0100 /* transmit enable */
|
||
|
|
#define UART011_CR_LBE 0x0080 /* loopback enable */
|
||
|
|
#define UART010_CR_RTIE 0x0040
|
||
|
|
#define UART010_CR_TIE 0x0020
|
||
|
|
#define UART010_CR_RIE 0x0010
|
||
|
|
#define UART010_CR_MSIE 0x0008
|
||
|
|
#define ST_UART011_CR_OVSFACT 0x0008 /* Oversampling factor */
|
||
|
|
#define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */
|
||
|
|
#define UART01x_CR_SIREN 0x0002 /* SIR enable */
|
||
|
|
#define UART01x_CR_UARTEN 0x0001 /* UART enable */
|
||
|
|
|
||
|
|
#define UART011_LCRH_SPS 0x80
|
||
|
|
#define UART01x_LCRH_WLEN_8 0x60
|
||
|
|
#define UART01x_LCRH_WLEN_7 0x40
|
||
|
|
#define UART01x_LCRH_WLEN_6 0x20
|
||
|
|
#define UART01x_LCRH_WLEN_5 0x00
|
||
|
|
#define UART01x_LCRH_FEN 0x10
|
||
|
|
#define UART01x_LCRH_STP2 0x08
|
||
|
|
#define UART01x_LCRH_EPS 0x04
|
||
|
|
#define UART01x_LCRH_PEN 0x02
|
||
|
|
#define UART01x_LCRH_BRK 0x01
|
||
|
|
|
||
|
|
#define ST_UART011_DMAWM_RX_1 (0 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_2 (1 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_4 (2 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_8 (3 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_16 (4 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_32 (5 << 3)
|
||
|
|
#define ST_UART011_DMAWM_RX_48 (6 << 3)
|
||
|
|
#define ST_UART011_DMAWM_TX_1 0
|
||
|
|
#define ST_UART011_DMAWM_TX_2 1
|
||
|
|
#define ST_UART011_DMAWM_TX_4 2
|
||
|
|
#define ST_UART011_DMAWM_TX_8 3
|
||
|
|
#define ST_UART011_DMAWM_TX_16 4
|
||
|
|
#define ST_UART011_DMAWM_TX_32 5
|
||
|
|
#define ST_UART011_DMAWM_TX_48 6
|
||
|
|
|
||
|
|
#define UART010_IIR_RTIS 0x08
|
||
|
|
#define UART010_IIR_TIS 0x04
|
||
|
|
#define UART010_IIR_RIS 0x02
|
||
|
|
#define UART010_IIR_MIS 0x01
|
||
|
|
|
||
|
|
#define UART011_IFLS_RX1_8 (0 << 3)
|
||
|
|
#define UART011_IFLS_RX2_8 (1 << 3)
|
||
|
|
#define UART011_IFLS_RX4_8 (2 << 3)
|
||
|
|
#define UART011_IFLS_RX6_8 (3 << 3)
|
||
|
|
#define UART011_IFLS_RX7_8 (4 << 3)
|
||
|
|
#define UART011_IFLS_TX1_8 (0 << 0)
|
||
|
|
#define UART011_IFLS_TX2_8 (1 << 0)
|
||
|
|
#define UART011_IFLS_TX4_8 (2 << 0)
|
||
|
|
#define UART011_IFLS_TX6_8 (3 << 0)
|
||
|
|
#define UART011_IFLS_TX7_8 (4 << 0)
|
||
|
|
/* special values for ST vendor with deeper fifo */
|
||
|
|
#define UART011_IFLS_RX_HALF (5 << 3)
|
||
|
|
#define UART011_IFLS_TX_HALF (5 << 0)
|
||
|
|
|
||
|
|
#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
|
||
|
|
#define UART011_BEIM (1 << 9) /* break error interrupt mask */
|
||
|
|
#define UART011_PEIM (1 << 8) /* parity error interrupt mask */
|
||
|
|
#define UART011_FEIM (1 << 7) /* framing error interrupt mask */
|
||
|
|
#define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */
|
||
|
|
#define UART011_TXIM (1 << 5) /* transmit interrupt mask */
|
||
|
|
#define UART011_RXIM (1 << 4) /* receive interrupt mask */
|
||
|
|
#define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */
|
||
|
|
#define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */
|
||
|
|
#define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */
|
||
|
|
#define UART011_RIMIM (1 << 0) /* RI interrupt mask */
|
||
|
|
|
||
|
|
#define UART011_OEIS (1 << 10) /* overrun error interrupt status */
|
||
|
|
#define UART011_BEIS (1 << 9) /* break error interrupt status */
|
||
|
|
#define UART011_PEIS (1 << 8) /* parity error interrupt status */
|
||
|
|
#define UART011_FEIS (1 << 7) /* framing error interrupt status */
|
||
|
|
#define UART011_RTIS (1 << 6) /* receive timeout interrupt status */
|
||
|
|
#define UART011_TXIS (1 << 5) /* transmit interrupt status */
|
||
|
|
#define UART011_RXIS (1 << 4) /* receive interrupt status */
|
||
|
|
#define UART011_DSRMIS (1 << 3) /* DSR interrupt status */
|
||
|
|
#define UART011_DCDMIS (1 << 2) /* DCD interrupt status */
|
||
|
|
#define UART011_CTSMIS (1 << 1) /* CTS interrupt status */
|
||
|
|
#define UART011_RIMIS (1 << 0) /* RI interrupt status */
|
||
|
|
|
||
|
|
#define UART011_OEIC (1 << 10) /* overrun error interrupt clear */
|
||
|
|
#define UART011_BEIC (1 << 9) /* break error interrupt clear */
|
||
|
|
#define UART011_PEIC (1 << 8) /* parity error interrupt clear */
|
||
|
|
#define UART011_FEIC (1 << 7) /* framing error interrupt clear */
|
||
|
|
#define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */
|
||
|
|
#define UART011_TXIC (1 << 5) /* transmit interrupt clear */
|
||
|
|
#define UART011_RXIC (1 << 4) /* receive interrupt clear */
|
||
|
|
#define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */
|
||
|
|
#define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */
|
||
|
|
#define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */
|
||
|
|
#define UART011_RIMIC (1 << 0) /* RI interrupt clear */
|
||
|
|
|
||
|
|
#define UART011_DMAONERR (1 << 2) /* disable dma on error */
|
||
|
|
#define UART011_TXDMAE (1 << 1) /* enable transmit dma */
|
||
|
|
#define UART011_RXDMAE (1 << 0) /* enable receive dma */
|
||
|
|
|
||
|
|
#define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE)
|
||
|
|
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
|
||
|
|
|
||
|
|
#ifndef __ASSEMBLY__
|
||
|
|
struct amba_device; /* in uncompress this is included but amba/bus.h is not */
|
||
|
|
struct amba_pl010_data {
|
||
|
|
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
|
||
|
|
};
|
||
|
|
|
||
|
|
struct dma_chan;
|
||
|
|
struct amba_pl011_data {
|
||
|
|
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
|
||
|
|
void *dma_rx_param;
|
||
|
|
void *dma_tx_param;
|
||
|
|
bool dma_rx_poll_enable;
|
||
|
|
unsigned int dma_rx_poll_rate;
|
||
|
|
unsigned int dma_rx_poll_timeout;
|
||
|
|
void (*init) (void);
|
||
|
|
void (*exit) (void);
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#endif
|