523 lines
12 KiB
C
523 lines
12 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Freescale eSDHC ColdFire family controller driver, platform bus.
|
||
|
*
|
||
|
* Copyright (c) 2020 Timesys Corporation
|
||
|
* Author: Angelo Dureghello <angelo.dureghello@timesys.it>
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/platform_data/mmc-esdhc-mcf.h>
|
||
|
#include <linux/mmc/mmc.h>
|
||
|
#include "sdhci-pltfm.h"
|
||
|
#include "sdhci-esdhc.h"
|
||
|
|
||
|
#define ESDHC_PROCTL_D3CD 0x08
|
||
|
#define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f
|
||
|
#define ESDHC_DEFAULT_HOST_CONTROL 0x28
|
||
|
|
||
|
/*
|
||
|
* Freescale eSDHC has DMA ERR flag at bit 28, not as std spec says, bit 25.
|
||
|
*/
|
||
|
#define ESDHC_INT_VENDOR_SPEC_DMA_ERR BIT(28)
|
||
|
|
||
|
struct pltfm_mcf_data {
|
||
|
struct clk *clk_ipg;
|
||
|
struct clk *clk_ahb;
|
||
|
struct clk *clk_per;
|
||
|
int aside;
|
||
|
int current_bus_width;
|
||
|
};
|
||
|
|
||
|
static inline void esdhc_mcf_buffer_swap32(u32 *buf, int len)
|
||
|
{
|
||
|
int i;
|
||
|
u32 temp;
|
||
|
|
||
|
len = (len + 3) >> 2;
|
||
|
|
||
|
for (i = 0; i < len; i++) {
|
||
|
temp = swab32(*buf);
|
||
|
*buf++ = temp;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static inline void esdhc_clrset_be(struct sdhci_host *host,
|
||
|
u32 mask, u32 val, int reg)
|
||
|
{
|
||
|
void __iomem *base = host->ioaddr + (reg & ~3);
|
||
|
u8 shift = (reg & 3) << 3;
|
||
|
|
||
|
mask <<= shift;
|
||
|
val <<= shift;
|
||
|
|
||
|
if (reg == SDHCI_HOST_CONTROL)
|
||
|
val |= ESDHC_PROCTL_D3CD;
|
||
|
|
||
|
writel((readl(base) & ~mask) | val, base);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Note: mcf is big-endian, single bytes need to be accessed at big endian
|
||
|
* offsets.
|
||
|
*/
|
||
|
static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg)
|
||
|
{
|
||
|
void __iomem *base = host->ioaddr + (reg & ~3);
|
||
|
u8 shift = (reg & 3) << 3;
|
||
|
u32 mask = ~(0xff << shift);
|
||
|
|
||
|
if (reg == SDHCI_HOST_CONTROL) {
|
||
|
u32 host_ctrl = ESDHC_DEFAULT_HOST_CONTROL;
|
||
|
u8 dma_bits = (val & SDHCI_CTRL_DMA_MASK) >> 3;
|
||
|
u8 tmp = readb(host->ioaddr + SDHCI_HOST_CONTROL + 1);
|
||
|
|
||
|
tmp &= ~0x03;
|
||
|
tmp |= dma_bits;
|
||
|
|
||
|
/*
|
||
|
* Recomposition needed, restore always endianness and
|
||
|
* keep D3CD and AI, just setting bus width.
|
||
|
*/
|
||
|
host_ctrl |= val;
|
||
|
host_ctrl |= (dma_bits << 8);
|
||
|
writel(host_ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
writel((readl(base) & mask) | (val << shift), base);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
|
||
|
void __iomem *base = host->ioaddr + (reg & ~3);
|
||
|
u8 shift = (reg & 3) << 3;
|
||
|
u32 mask = ~(0xffff << shift);
|
||
|
|
||
|
switch (reg) {
|
||
|
case SDHCI_TRANSFER_MODE:
|
||
|
mcf_data->aside = val;
|
||
|
return;
|
||
|
case SDHCI_COMMAND:
|
||
|
if (host->cmd->opcode == MMC_STOP_TRANSMISSION)
|
||
|
val |= SDHCI_CMD_ABORTCMD;
|
||
|
|
||
|
/*
|
||
|
* As for the fsl driver,
|
||
|
* we have to set the mode in a single write here.
|
||
|
*/
|
||
|
writel(val << 16 | mcf_data->aside,
|
||
|
host->ioaddr + SDHCI_TRANSFER_MODE);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
writel((readl(base) & mask) | (val << shift), base);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_writel_be(struct sdhci_host *host, u32 val, int reg)
|
||
|
{
|
||
|
writel(val, host->ioaddr + reg);
|
||
|
}
|
||
|
|
||
|
static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg)
|
||
|
{
|
||
|
if (reg == SDHCI_HOST_CONTROL) {
|
||
|
u8 __iomem *base = host->ioaddr + (reg & ~3);
|
||
|
u16 val = readw(base + 2);
|
||
|
u8 dma_bits = (val >> 5) & SDHCI_CTRL_DMA_MASK;
|
||
|
u8 host_ctrl = val & 0xff;
|
||
|
|
||
|
host_ctrl &= ~SDHCI_CTRL_DMA_MASK;
|
||
|
host_ctrl |= dma_bits;
|
||
|
|
||
|
return host_ctrl;
|
||
|
}
|
||
|
|
||
|
return readb(host->ioaddr + (reg ^ 0x3));
|
||
|
}
|
||
|
|
||
|
static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg)
|
||
|
{
|
||
|
/*
|
||
|
* For SDHCI_HOST_VERSION, sdhci specs defines 0xFE,
|
||
|
* a wrong offset for us, we are at 0xFC.
|
||
|
*/
|
||
|
if (reg == SDHCI_HOST_VERSION)
|
||
|
reg -= 2;
|
||
|
|
||
|
return readw(host->ioaddr + (reg ^ 0x2));
|
||
|
}
|
||
|
|
||
|
static u32 esdhc_mcf_readl_be(struct sdhci_host *host, int reg)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
val = readl(host->ioaddr + reg);
|
||
|
|
||
|
/*
|
||
|
* RM (25.3.9) sd pin clock must never exceed 25Mhz.
|
||
|
* So forcing legacy mode at 25Mhz.
|
||
|
*/
|
||
|
if (unlikely(reg == SDHCI_CAPABILITIES))
|
||
|
val &= ~SDHCI_CAN_DO_HISPD;
|
||
|
|
||
|
if (unlikely(reg == SDHCI_INT_STATUS)) {
|
||
|
if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) {
|
||
|
val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR;
|
||
|
val |= SDHCI_INT_ADMA_ERROR;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return val;
|
||
|
}
|
||
|
|
||
|
static unsigned int esdhc_mcf_get_max_timeout_count(struct sdhci_host *host)
|
||
|
{
|
||
|
return 1 << 27;
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_set_timeout(struct sdhci_host *host,
|
||
|
struct mmc_command *cmd)
|
||
|
{
|
||
|
/* Use maximum timeout counter */
|
||
|
esdhc_clrset_be(host, ESDHC_SYS_CTRL_DTOCV_MASK, 0xE,
|
||
|
SDHCI_TIMEOUT_CONTROL);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_reset(struct sdhci_host *host, u8 mask)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
sdhci_reset(host, mask);
|
||
|
|
||
|
esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
|
||
|
mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
|
||
|
|
||
|
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
|
||
|
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
||
|
}
|
||
|
|
||
|
static unsigned int esdhc_mcf_pltfm_get_max_clock(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
|
||
|
return pltfm_host->clock;
|
||
|
}
|
||
|
|
||
|
static unsigned int esdhc_mcf_pltfm_get_min_clock(struct sdhci_host *host)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
|
||
|
return pltfm_host->clock / 256 / 16;
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_pltfm_set_clock(struct sdhci_host *host,
|
||
|
unsigned int clock)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
unsigned long *pll_dr = (unsigned long *)MCF_PLL_DR;
|
||
|
u32 fvco, fsys, fesdhc, temp;
|
||
|
const int sdclkfs[] = {2, 4, 8, 16, 32, 64, 128, 256};
|
||
|
int delta, old_delta = clock;
|
||
|
int i, q, ri, rq;
|
||
|
|
||
|
if (clock == 0) {
|
||
|
host->mmc->actual_clock = 0;
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* ColdFire eSDHC clock.s
|
||
|
*
|
||
|
* pll -+-> / outdiv1 --> fsys
|
||
|
* +-> / outdiv3 --> eSDHC clock ---> / SDCCLKFS / DVS
|
||
|
*
|
||
|
* mcf5441x datasheet says:
|
||
|
* (8.1.2) eSDHC should be 40 MHz max
|
||
|
* (25.3.9) eSDHC input is, as example, 96 Mhz ...
|
||
|
* (25.3.9) sd pin clock must never exceed 25Mhz
|
||
|
*
|
||
|
* fvco = fsys * outdvi1 + 1
|
||
|
* fshdc = fvco / outdiv3 + 1
|
||
|
*/
|
||
|
temp = readl(pll_dr);
|
||
|
fsys = pltfm_host->clock;
|
||
|
fvco = fsys * ((temp & 0x1f) + 1);
|
||
|
fesdhc = fvco / (((temp >> 10) & 0x1f) + 1);
|
||
|
|
||
|
for (i = 0; i < 8; ++i) {
|
||
|
int result = fesdhc / sdclkfs[i];
|
||
|
|
||
|
for (q = 1; q < 17; ++q) {
|
||
|
int finale = result / q;
|
||
|
|
||
|
delta = abs(clock - finale);
|
||
|
|
||
|
if (delta < old_delta) {
|
||
|
old_delta = delta;
|
||
|
ri = i;
|
||
|
rq = q;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Apply divisors and re-enable all the clocks
|
||
|
*/
|
||
|
temp = ((sdclkfs[ri] >> 1) << 8) | ((rq - 1) << 4) |
|
||
|
(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN);
|
||
|
esdhc_clrset_be(host, 0x0000fff7, temp, SDHCI_CLOCK_CONTROL);
|
||
|
|
||
|
host->mmc->actual_clock = clock;
|
||
|
|
||
|
mdelay(1);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_pltfm_set_bus_width(struct sdhci_host *host, int width)
|
||
|
{
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
switch (width) {
|
||
|
case MMC_BUS_WIDTH_4:
|
||
|
mcf_data->current_bus_width = ESDHC_CTRL_4BITBUS;
|
||
|
break;
|
||
|
default:
|
||
|
mcf_data->current_bus_width = 0;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
esdhc_clrset_be(host, ESDHC_CTRL_BUSWIDTH_MASK,
|
||
|
mcf_data->current_bus_width, SDHCI_HOST_CONTROL);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_request_done(struct sdhci_host *host,
|
||
|
struct mmc_request *mrq)
|
||
|
{
|
||
|
struct scatterlist *sg;
|
||
|
u32 *buffer;
|
||
|
int i;
|
||
|
|
||
|
if (!mrq->data || !mrq->data->bytes_xfered)
|
||
|
goto exit_done;
|
||
|
|
||
|
if (mmc_get_dma_dir(mrq->data) != DMA_FROM_DEVICE)
|
||
|
goto exit_done;
|
||
|
|
||
|
/*
|
||
|
* On mcf5441x there is no hw sdma option/flag to select the dma
|
||
|
* transfer endiannes. A swap after the transfer is needed.
|
||
|
*/
|
||
|
for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) {
|
||
|
buffer = (u32 *)sg_virt(sg);
|
||
|
esdhc_mcf_buffer_swap32(buffer, sg->length);
|
||
|
}
|
||
|
|
||
|
exit_done:
|
||
|
mmc_request_done(host->mmc, mrq);
|
||
|
}
|
||
|
|
||
|
static void esdhc_mcf_copy_to_bounce_buffer(struct sdhci_host *host,
|
||
|
struct mmc_data *data,
|
||
|
unsigned int length)
|
||
|
{
|
||
|
sg_copy_to_buffer(data->sg, data->sg_len,
|
||
|
host->bounce_buffer, length);
|
||
|
|
||
|
esdhc_mcf_buffer_swap32((u32 *)host->bounce_buffer,
|
||
|
data->blksz * data->blocks);
|
||
|
}
|
||
|
|
||
|
static struct sdhci_ops sdhci_esdhc_ops = {
|
||
|
.reset = esdhc_mcf_reset,
|
||
|
.set_clock = esdhc_mcf_pltfm_set_clock,
|
||
|
.get_max_clock = esdhc_mcf_pltfm_get_max_clock,
|
||
|
.get_min_clock = esdhc_mcf_pltfm_get_min_clock,
|
||
|
.set_bus_width = esdhc_mcf_pltfm_set_bus_width,
|
||
|
.get_max_timeout_count = esdhc_mcf_get_max_timeout_count,
|
||
|
.set_timeout = esdhc_mcf_set_timeout,
|
||
|
.write_b = esdhc_mcf_writeb_be,
|
||
|
.write_w = esdhc_mcf_writew_be,
|
||
|
.write_l = esdhc_mcf_writel_be,
|
||
|
.read_b = esdhc_mcf_readb_be,
|
||
|
.read_w = esdhc_mcf_readw_be,
|
||
|
.read_l = esdhc_mcf_readl_be,
|
||
|
.copy_to_bounce_buffer = esdhc_mcf_copy_to_bounce_buffer,
|
||
|
.request_done = esdhc_mcf_request_done,
|
||
|
};
|
||
|
|
||
|
static const struct sdhci_pltfm_data sdhci_esdhc_mcf_pdata = {
|
||
|
.ops = &sdhci_esdhc_ops,
|
||
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_FORCE_DMA,
|
||
|
/*
|
||
|
* Mandatory quirk,
|
||
|
* controller does not support cmd23,
|
||
|
* without, on > 8G cards cmd23 is used, and
|
||
|
* driver times out.
|
||
|
*/
|
||
|
SDHCI_QUIRK2_HOST_NO_CMD23,
|
||
|
};
|
||
|
|
||
|
static int esdhc_mcf_plat_init(struct sdhci_host *host,
|
||
|
struct pltfm_mcf_data *mcf_data)
|
||
|
{
|
||
|
struct mcf_esdhc_platform_data *plat_data;
|
||
|
struct device *dev = mmc_dev(host->mmc);
|
||
|
|
||
|
if (!dev->platform_data) {
|
||
|
dev_err(dev, "no platform data!\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
plat_data = (struct mcf_esdhc_platform_data *)dev->platform_data;
|
||
|
|
||
|
/* Card_detect */
|
||
|
switch (plat_data->cd_type) {
|
||
|
default:
|
||
|
case ESDHC_CD_CONTROLLER:
|
||
|
/* We have a working card_detect back */
|
||
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
||
|
break;
|
||
|
case ESDHC_CD_PERMANENT:
|
||
|
host->mmc->caps |= MMC_CAP_NONREMOVABLE;
|
||
|
break;
|
||
|
case ESDHC_CD_NONE:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
switch (plat_data->max_bus_width) {
|
||
|
case 4:
|
||
|
host->mmc->caps |= MMC_CAP_4_BIT_DATA;
|
||
|
break;
|
||
|
case 1:
|
||
|
default:
|
||
|
host->quirks |= SDHCI_QUIRK_FORCE_1_BIT_DATA;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int sdhci_esdhc_mcf_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct sdhci_host *host;
|
||
|
struct sdhci_pltfm_host *pltfm_host;
|
||
|
struct pltfm_mcf_data *mcf_data;
|
||
|
int err;
|
||
|
|
||
|
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_mcf_pdata,
|
||
|
sizeof(*mcf_data));
|
||
|
|
||
|
if (IS_ERR(host))
|
||
|
return PTR_ERR(host);
|
||
|
|
||
|
pltfm_host = sdhci_priv(host);
|
||
|
mcf_data = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
host->sdma_boundary = 0;
|
||
|
|
||
|
host->flags |= SDHCI_AUTO_CMD12;
|
||
|
|
||
|
mcf_data->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
|
||
|
if (IS_ERR(mcf_data->clk_ipg)) {
|
||
|
err = PTR_ERR(mcf_data->clk_ipg);
|
||
|
goto err_exit;
|
||
|
}
|
||
|
|
||
|
mcf_data->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
|
||
|
if (IS_ERR(mcf_data->clk_ahb)) {
|
||
|
err = PTR_ERR(mcf_data->clk_ahb);
|
||
|
goto err_exit;
|
||
|
}
|
||
|
|
||
|
mcf_data->clk_per = devm_clk_get(&pdev->dev, "per");
|
||
|
if (IS_ERR(mcf_data->clk_per)) {
|
||
|
err = PTR_ERR(mcf_data->clk_per);
|
||
|
goto err_exit;
|
||
|
}
|
||
|
|
||
|
pltfm_host->clk = mcf_data->clk_per;
|
||
|
pltfm_host->clock = clk_get_rate(pltfm_host->clk);
|
||
|
err = clk_prepare_enable(mcf_data->clk_per);
|
||
|
if (err)
|
||
|
goto err_exit;
|
||
|
|
||
|
err = clk_prepare_enable(mcf_data->clk_ipg);
|
||
|
if (err)
|
||
|
goto unprep_per;
|
||
|
|
||
|
err = clk_prepare_enable(mcf_data->clk_ahb);
|
||
|
if (err)
|
||
|
goto unprep_ipg;
|
||
|
|
||
|
err = esdhc_mcf_plat_init(host, mcf_data);
|
||
|
if (err)
|
||
|
goto unprep_ahb;
|
||
|
|
||
|
err = sdhci_setup_host(host);
|
||
|
if (err)
|
||
|
goto unprep_ahb;
|
||
|
|
||
|
if (!host->bounce_buffer) {
|
||
|
dev_err(&pdev->dev, "bounce buffer not allocated");
|
||
|
err = -ENOMEM;
|
||
|
goto cleanup;
|
||
|
}
|
||
|
|
||
|
err = __sdhci_add_host(host);
|
||
|
if (err)
|
||
|
goto cleanup;
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
cleanup:
|
||
|
sdhci_cleanup_host(host);
|
||
|
unprep_ahb:
|
||
|
clk_disable_unprepare(mcf_data->clk_ahb);
|
||
|
unprep_ipg:
|
||
|
clk_disable_unprepare(mcf_data->clk_ipg);
|
||
|
unprep_per:
|
||
|
clk_disable_unprepare(mcf_data->clk_per);
|
||
|
err_exit:
|
||
|
sdhci_pltfm_free(pdev);
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int sdhci_esdhc_mcf_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
||
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
||
|
struct pltfm_mcf_data *mcf_data = sdhci_pltfm_priv(pltfm_host);
|
||
|
|
||
|
sdhci_remove_host(host, 0);
|
||
|
|
||
|
clk_disable_unprepare(mcf_data->clk_ipg);
|
||
|
clk_disable_unprepare(mcf_data->clk_ahb);
|
||
|
clk_disable_unprepare(mcf_data->clk_per);
|
||
|
|
||
|
sdhci_pltfm_free(pdev);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static struct platform_driver sdhci_esdhc_mcf_driver = {
|
||
|
.driver = {
|
||
|
.name = "sdhci-esdhc-mcf",
|
||
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
||
|
},
|
||
|
.probe = sdhci_esdhc_mcf_probe,
|
||
|
.remove = sdhci_esdhc_mcf_remove,
|
||
|
};
|
||
|
|
||
|
module_platform_driver(sdhci_esdhc_mcf_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("SDHCI driver for Freescale ColdFire eSDHC");
|
||
|
MODULE_AUTHOR("Angelo Dureghello <angelo.dureghello@timesys.com>");
|
||
|
MODULE_LICENSE("GPL v2");
|