34 lines
1.1 KiB
Plaintext
34 lines
1.1 KiB
Plaintext
|
Spreadtrum SPI Controller
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "sprd,sc9860-spi".
|
||
|
|
- reg: Offset and length of SPI controller register space.
|
||
|
|
- interrupts: Should contain SPI interrupt.
|
||
|
|
- clock-names: Should contain following entries:
|
||
|
|
"spi" for SPI clock,
|
||
|
|
"source" for SPI source (parent) clock,
|
||
|
|
"enable" for SPI module enable clock.
|
||
|
|
- clocks: List of clock input name strings sorted in the same order
|
||
|
|
as the clock-names property.
|
||
|
|
- #address-cells: The number of cells required to define a chip select
|
||
|
|
address on the SPI bus. Should be set to 1.
|
||
|
|
- #size-cells: Should be set to 0.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
dma-names: Should contain names of the SPI used DMA channel.
|
||
|
|
dmas: Should contain DMA channels and DMA slave ids which the SPI used
|
||
|
|
sorted in the same order as the dma-names property.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
spi0: spi@70a00000{
|
||
|
|
compatible = "sprd,sc9860-spi";
|
||
|
|
reg = <0 0x70a00000 0 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clock-names = "spi", "source","enable";
|
||
|
|
clocks = <&clk_spi0>, <&ext_26m>, <&clk_ap_apb_gates 5>;
|
||
|
|
dma-names = "rx_chn", "tx_chn";
|
||
|
|
dmas = <&apdma 11 11>, <&apdma 12 12>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|