linuxdebug/arch/arm/boot/dts/imx6q-logicpd.dts

131 lines
2.7 KiB
Plaintext
Raw Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2019 Logic PD, Inc.
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6-logicpd-som.dtsi"
#include "imx6-logicpd-baseboard.dtsi"
/ {
model = "Logic PD i.MX6QD SOM-M3";
compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
backlight: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 20000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_lcd>;
};
panel-lvds0 {
compatible = "okaya,rs800480t-7x0gp";
power-supply = <&reg_lcd_reset>;
backlight = <&backlight>;
port {
panel_in_lvds0: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
};
reg_lcd: regulator-lcd {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_reg>;
compatible = "regulator-fixed";
regulator-name = "lcd_panel_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_3v3>;
startup-delay-us = <500000>;
};
reg_lcd_reset: regulator-lcd-reset {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_reset>;
compatible = "regulator-fixed";
regulator-name = "nLCD_RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_lcd>;
};
};
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
<&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
touchscreen@26 {
compatible = "ilitek,ili2117";
reg = <0x26>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touchscreen>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
};
};
&ldb {
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
status = "okay";
port@4 {
reg = <4>;
lvds0_out: endpoint {
remote-endpoint = <&panel_in_lvds0>;
};
};
};
};
&pwm3 {
status = "okay";
};
&reg_hdmi {
regulator-always-on; /* Without this, the level shifter on HDMI doesn't turn on */
};
&iomuxc {
pinctrl_lcd_reg: lcdreg {
fsl,pins = <
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x100b0 /* R_LCD_PANEL_PWR */
>;
};
pinctrl_lcd_reset: lcdreset {
fsl,pins = <
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 /* LCD_nRESET */
>;
};
pinctrl_touchscreen: touchscreengrp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* TOUCH_nPINTDAV */
>;
};
};