1095 lines
24 KiB
C
1095 lines
24 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver
|
||
|
*
|
||
|
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
|
||
|
*
|
||
|
* Documentation: ARM DDI 0173B
|
||
|
*/
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/ioport.h>
|
||
|
#include <linux/device.h>
|
||
|
#include <linux/spinlock.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/amba/bus.h>
|
||
|
#include <linux/io.h>
|
||
|
|
||
|
#include <sound/core.h>
|
||
|
#include <sound/initval.h>
|
||
|
#include <sound/ac97_codec.h>
|
||
|
#include <sound/pcm.h>
|
||
|
#include <sound/pcm_params.h>
|
||
|
|
||
|
#include "aaci.h"
|
||
|
|
||
|
#define DRIVER_NAME "aaci-pl041"
|
||
|
|
||
|
#define FRAME_PERIOD_US 21
|
||
|
|
||
|
/*
|
||
|
* PM support is not complete. Turn it off.
|
||
|
*/
|
||
|
#undef CONFIG_PM
|
||
|
|
||
|
static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97)
|
||
|
{
|
||
|
u32 v, maincr = aaci->maincr | MAINCR_SCRA(ac97->num);
|
||
|
|
||
|
/*
|
||
|
* Ensure that the slot 1/2 RX registers are empty.
|
||
|
*/
|
||
|
v = readl(aaci->base + AACI_SLFR);
|
||
|
if (v & SLFR_2RXV)
|
||
|
readl(aaci->base + AACI_SL2RX);
|
||
|
if (v & SLFR_1RXV)
|
||
|
readl(aaci->base + AACI_SL1RX);
|
||
|
|
||
|
if (maincr != readl(aaci->base + AACI_MAINCR)) {
|
||
|
writel(maincr, aaci->base + AACI_MAINCR);
|
||
|
readl(aaci->base + AACI_MAINCR);
|
||
|
udelay(1);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* P29:
|
||
|
* The recommended use of programming the external codec through slot 1
|
||
|
* and slot 2 data is to use the channels during setup routines and the
|
||
|
* slot register at any other time. The data written into slot 1, slot 2
|
||
|
* and slot 12 registers is transmitted only when their corresponding
|
||
|
* SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR
|
||
|
* register.
|
||
|
*/
|
||
|
static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
|
||
|
unsigned short val)
|
||
|
{
|
||
|
struct aaci *aaci = ac97->private_data;
|
||
|
int timeout;
|
||
|
u32 v;
|
||
|
|
||
|
if (ac97->num >= 4)
|
||
|
return;
|
||
|
|
||
|
mutex_lock(&aaci->ac97_sem);
|
||
|
|
||
|
aaci_ac97_select_codec(aaci, ac97);
|
||
|
|
||
|
/*
|
||
|
* P54: You must ensure that AACI_SL2TX is always written
|
||
|
* to, if required, before data is written to AACI_SL1TX.
|
||
|
*/
|
||
|
writel(val << 4, aaci->base + AACI_SL2TX);
|
||
|
writel(reg << 12, aaci->base + AACI_SL1TX);
|
||
|
|
||
|
/* Initially, wait one frame period */
|
||
|
udelay(FRAME_PERIOD_US);
|
||
|
|
||
|
/* And then wait an additional eight frame periods for it to be sent */
|
||
|
timeout = FRAME_PERIOD_US * 8;
|
||
|
do {
|
||
|
udelay(1);
|
||
|
v = readl(aaci->base + AACI_SLFR);
|
||
|
} while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout);
|
||
|
|
||
|
if (v & (SLFR_1TXB|SLFR_2TXB))
|
||
|
dev_err(&aaci->dev->dev,
|
||
|
"timeout waiting for write to complete\n");
|
||
|
|
||
|
mutex_unlock(&aaci->ac97_sem);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Read an AC'97 register.
|
||
|
*/
|
||
|
static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
|
||
|
{
|
||
|
struct aaci *aaci = ac97->private_data;
|
||
|
int timeout, retries = 10;
|
||
|
u32 v;
|
||
|
|
||
|
if (ac97->num >= 4)
|
||
|
return ~0;
|
||
|
|
||
|
mutex_lock(&aaci->ac97_sem);
|
||
|
|
||
|
aaci_ac97_select_codec(aaci, ac97);
|
||
|
|
||
|
/*
|
||
|
* Write the register address to slot 1.
|
||
|
*/
|
||
|
writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX);
|
||
|
|
||
|
/* Initially, wait one frame period */
|
||
|
udelay(FRAME_PERIOD_US);
|
||
|
|
||
|
/* And then wait an additional eight frame periods for it to be sent */
|
||
|
timeout = FRAME_PERIOD_US * 8;
|
||
|
do {
|
||
|
udelay(1);
|
||
|
v = readl(aaci->base + AACI_SLFR);
|
||
|
} while ((v & SLFR_1TXB) && --timeout);
|
||
|
|
||
|
if (v & SLFR_1TXB) {
|
||
|
dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
|
||
|
v = ~0;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/* Now wait for the response frame */
|
||
|
udelay(FRAME_PERIOD_US);
|
||
|
|
||
|
/* And then wait an additional eight frame periods for data */
|
||
|
timeout = FRAME_PERIOD_US * 8;
|
||
|
do {
|
||
|
udelay(1);
|
||
|
cond_resched();
|
||
|
v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
|
||
|
} while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout);
|
||
|
|
||
|
if (v != (SLFR_1RXV|SLFR_2RXV)) {
|
||
|
dev_err(&aaci->dev->dev, "timeout on RX valid\n");
|
||
|
v = ~0;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
do {
|
||
|
v = readl(aaci->base + AACI_SL1RX) >> 12;
|
||
|
if (v == reg) {
|
||
|
v = readl(aaci->base + AACI_SL2RX) >> 4;
|
||
|
break;
|
||
|
} else if (--retries) {
|
||
|
dev_warn(&aaci->dev->dev,
|
||
|
"ac97 read back fail. retry\n");
|
||
|
continue;
|
||
|
} else {
|
||
|
dev_warn(&aaci->dev->dev,
|
||
|
"wrong ac97 register read back (%x != %x)\n",
|
||
|
v, reg);
|
||
|
v = ~0;
|
||
|
}
|
||
|
} while (retries);
|
||
|
out:
|
||
|
mutex_unlock(&aaci->ac97_sem);
|
||
|
return v;
|
||
|
}
|
||
|
|
||
|
static inline void
|
||
|
aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask)
|
||
|
{
|
||
|
u32 val;
|
||
|
int timeout = 5000;
|
||
|
|
||
|
do {
|
||
|
udelay(1);
|
||
|
val = readl(aacirun->base + AACI_SR);
|
||
|
} while (val & mask && timeout--);
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Interrupt support.
|
||
|
*/
|
||
|
static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
|
||
|
{
|
||
|
if (mask & ISR_ORINTR) {
|
||
|
dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel);
|
||
|
writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR);
|
||
|
}
|
||
|
|
||
|
if (mask & ISR_RXTOINTR) {
|
||
|
dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel);
|
||
|
writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR);
|
||
|
}
|
||
|
|
||
|
if (mask & ISR_RXINTR) {
|
||
|
struct aaci_runtime *aacirun = &aaci->capture;
|
||
|
bool period_elapsed = false;
|
||
|
void *ptr;
|
||
|
|
||
|
if (!aacirun->substream || !aacirun->start) {
|
||
|
dev_warn(&aaci->dev->dev, "RX interrupt???\n");
|
||
|
writel(0, aacirun->base + AACI_IE);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
spin_lock(&aacirun->lock);
|
||
|
|
||
|
ptr = aacirun->ptr;
|
||
|
do {
|
||
|
unsigned int len = aacirun->fifo_bytes;
|
||
|
u32 val;
|
||
|
|
||
|
if (aacirun->bytes <= 0) {
|
||
|
aacirun->bytes += aacirun->period;
|
||
|
period_elapsed = true;
|
||
|
}
|
||
|
if (!(aacirun->cr & CR_EN))
|
||
|
break;
|
||
|
|
||
|
val = readl(aacirun->base + AACI_SR);
|
||
|
if (!(val & SR_RXHF))
|
||
|
break;
|
||
|
if (!(val & SR_RXFF))
|
||
|
len >>= 1;
|
||
|
|
||
|
aacirun->bytes -= len;
|
||
|
|
||
|
/* reading 16 bytes at a time */
|
||
|
for( ; len > 0; len -= 16) {
|
||
|
asm(
|
||
|
"ldmia %1, {r0, r1, r2, r3}\n\t"
|
||
|
"stmia %0!, {r0, r1, r2, r3}"
|
||
|
: "+r" (ptr)
|
||
|
: "r" (aacirun->fifo)
|
||
|
: "r0", "r1", "r2", "r3", "cc");
|
||
|
|
||
|
if (ptr >= aacirun->end)
|
||
|
ptr = aacirun->start;
|
||
|
}
|
||
|
} while(1);
|
||
|
|
||
|
aacirun->ptr = ptr;
|
||
|
|
||
|
spin_unlock(&aacirun->lock);
|
||
|
|
||
|
if (period_elapsed)
|
||
|
snd_pcm_period_elapsed(aacirun->substream);
|
||
|
}
|
||
|
|
||
|
if (mask & ISR_URINTR) {
|
||
|
dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel);
|
||
|
writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR);
|
||
|
}
|
||
|
|
||
|
if (mask & ISR_TXINTR) {
|
||
|
struct aaci_runtime *aacirun = &aaci->playback;
|
||
|
bool period_elapsed = false;
|
||
|
void *ptr;
|
||
|
|
||
|
if (!aacirun->substream || !aacirun->start) {
|
||
|
dev_warn(&aaci->dev->dev, "TX interrupt???\n");
|
||
|
writel(0, aacirun->base + AACI_IE);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
spin_lock(&aacirun->lock);
|
||
|
|
||
|
ptr = aacirun->ptr;
|
||
|
do {
|
||
|
unsigned int len = aacirun->fifo_bytes;
|
||
|
u32 val;
|
||
|
|
||
|
if (aacirun->bytes <= 0) {
|
||
|
aacirun->bytes += aacirun->period;
|
||
|
period_elapsed = true;
|
||
|
}
|
||
|
if (!(aacirun->cr & CR_EN))
|
||
|
break;
|
||
|
|
||
|
val = readl(aacirun->base + AACI_SR);
|
||
|
if (!(val & SR_TXHE))
|
||
|
break;
|
||
|
if (!(val & SR_TXFE))
|
||
|
len >>= 1;
|
||
|
|
||
|
aacirun->bytes -= len;
|
||
|
|
||
|
/* writing 16 bytes at a time */
|
||
|
for ( ; len > 0; len -= 16) {
|
||
|
asm(
|
||
|
"ldmia %0!, {r0, r1, r2, r3}\n\t"
|
||
|
"stmia %1, {r0, r1, r2, r3}"
|
||
|
: "+r" (ptr)
|
||
|
: "r" (aacirun->fifo)
|
||
|
: "r0", "r1", "r2", "r3", "cc");
|
||
|
|
||
|
if (ptr >= aacirun->end)
|
||
|
ptr = aacirun->start;
|
||
|
}
|
||
|
} while (1);
|
||
|
|
||
|
aacirun->ptr = ptr;
|
||
|
|
||
|
spin_unlock(&aacirun->lock);
|
||
|
|
||
|
if (period_elapsed)
|
||
|
snd_pcm_period_elapsed(aacirun->substream);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static irqreturn_t aaci_irq(int irq, void *devid)
|
||
|
{
|
||
|
struct aaci *aaci = devid;
|
||
|
u32 mask;
|
||
|
int i;
|
||
|
|
||
|
mask = readl(aaci->base + AACI_ALLINTS);
|
||
|
if (mask) {
|
||
|
u32 m = mask;
|
||
|
for (i = 0; i < 4; i++, m >>= 7) {
|
||
|
if (m & 0x7f) {
|
||
|
aaci_fifo_irq(aaci, i, m);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return mask ? IRQ_HANDLED : IRQ_NONE;
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
/*
|
||
|
* ALSA support.
|
||
|
*/
|
||
|
static const struct snd_pcm_hardware aaci_hw_info = {
|
||
|
.info = SNDRV_PCM_INFO_MMAP |
|
||
|
SNDRV_PCM_INFO_MMAP_VALID |
|
||
|
SNDRV_PCM_INFO_INTERLEAVED |
|
||
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
||
|
SNDRV_PCM_INFO_RESUME,
|
||
|
|
||
|
/*
|
||
|
* ALSA doesn't support 18-bit or 20-bit packed into 32-bit
|
||
|
* words. It also doesn't support 12-bit at all.
|
||
|
*/
|
||
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
||
|
|
||
|
/* rates are setup from the AC'97 codec */
|
||
|
.channels_min = 2,
|
||
|
.channels_max = 2,
|
||
|
.buffer_bytes_max = 64 * 1024,
|
||
|
.period_bytes_min = 256,
|
||
|
.period_bytes_max = PAGE_SIZE,
|
||
|
.periods_min = 4,
|
||
|
.periods_max = PAGE_SIZE / 16,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* We can support two and four channel audio. Unfortunately
|
||
|
* six channel audio requires a non-standard channel ordering:
|
||
|
* 2 -> FL(3), FR(4)
|
||
|
* 4 -> FL(3), FR(4), SL(7), SR(8)
|
||
|
* 6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required)
|
||
|
* FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual)
|
||
|
* This requires an ALSA configuration file to correct.
|
||
|
*/
|
||
|
static int aaci_rule_channels(struct snd_pcm_hw_params *p,
|
||
|
struct snd_pcm_hw_rule *rule)
|
||
|
{
|
||
|
static const unsigned int channel_list[] = { 2, 4, 6 };
|
||
|
struct aaci *aaci = rule->private;
|
||
|
unsigned int mask = 1 << 0, slots;
|
||
|
|
||
|
/* pcms[0] is the our 5.1 PCM instance. */
|
||
|
slots = aaci->ac97_bus->pcms[0].r[0].slots;
|
||
|
if (slots & (1 << AC97_SLOT_PCM_SLEFT)) {
|
||
|
mask |= 1 << 1;
|
||
|
if (slots & (1 << AC97_SLOT_LFE))
|
||
|
mask |= 1 << 2;
|
||
|
}
|
||
|
|
||
|
return snd_interval_list(hw_param_interval(p, rule->var),
|
||
|
ARRAY_SIZE(channel_list), channel_list, mask);
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_open(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
||
|
struct aaci *aaci = substream->private_data;
|
||
|
struct aaci_runtime *aacirun;
|
||
|
int ret = 0;
|
||
|
|
||
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
||
|
aacirun = &aaci->playback;
|
||
|
} else {
|
||
|
aacirun = &aaci->capture;
|
||
|
}
|
||
|
|
||
|
aacirun->substream = substream;
|
||
|
runtime->private_data = aacirun;
|
||
|
runtime->hw = aaci_hw_info;
|
||
|
runtime->hw.rates = aacirun->pcm->rates;
|
||
|
snd_pcm_limit_hw_rates(runtime);
|
||
|
|
||
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
||
|
runtime->hw.channels_max = 6;
|
||
|
|
||
|
/* Add rule describing channel dependency. */
|
||
|
ret = snd_pcm_hw_rule_add(substream->runtime, 0,
|
||
|
SNDRV_PCM_HW_PARAM_CHANNELS,
|
||
|
aaci_rule_channels, aaci,
|
||
|
SNDRV_PCM_HW_PARAM_CHANNELS, -1);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
if (aacirun->pcm->r[1].slots)
|
||
|
snd_ac97_pcm_double_rate_rules(runtime);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* ALSA wants the byte-size of the FIFOs. As we only support
|
||
|
* 16-bit samples, this is twice the FIFO depth irrespective
|
||
|
* of whether it's in compact mode or not.
|
||
|
*/
|
||
|
runtime->hw.fifo_size = aaci->fifo_depth * 2;
|
||
|
|
||
|
mutex_lock(&aaci->irq_lock);
|
||
|
if (!aaci->users++) {
|
||
|
ret = request_irq(aaci->dev->irq[0], aaci_irq,
|
||
|
IRQF_SHARED, DRIVER_NAME, aaci);
|
||
|
if (ret != 0)
|
||
|
aaci->users--;
|
||
|
}
|
||
|
mutex_unlock(&aaci->irq_lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Common ALSA stuff
|
||
|
*/
|
||
|
static int aaci_pcm_close(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct aaci *aaci = substream->private_data;
|
||
|
struct aaci_runtime *aacirun = substream->runtime->private_data;
|
||
|
|
||
|
WARN_ON(aacirun->cr & CR_EN);
|
||
|
|
||
|
aacirun->substream = NULL;
|
||
|
|
||
|
mutex_lock(&aaci->irq_lock);
|
||
|
if (!--aaci->users)
|
||
|
free_irq(aaci->dev->irq[0], aaci);
|
||
|
mutex_unlock(&aaci->irq_lock);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_hw_free(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct aaci_runtime *aacirun = substream->runtime->private_data;
|
||
|
|
||
|
/*
|
||
|
* This must not be called with the device enabled.
|
||
|
*/
|
||
|
WARN_ON(aacirun->cr & CR_EN);
|
||
|
|
||
|
if (aacirun->pcm_open)
|
||
|
snd_ac97_pcm_close(aacirun->pcm);
|
||
|
aacirun->pcm_open = 0;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Channel to slot mask */
|
||
|
static const u32 channels_to_slotmask[] = {
|
||
|
[2] = CR_SL3 | CR_SL4,
|
||
|
[4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
|
||
|
[6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
|
||
|
};
|
||
|
|
||
|
static int aaci_pcm_hw_params(struct snd_pcm_substream *substream,
|
||
|
struct snd_pcm_hw_params *params)
|
||
|
{
|
||
|
struct aaci_runtime *aacirun = substream->runtime->private_data;
|
||
|
struct aaci *aaci = substream->private_data;
|
||
|
unsigned int channels = params_channels(params);
|
||
|
unsigned int rate = params_rate(params);
|
||
|
int dbl = rate > 48000;
|
||
|
int err;
|
||
|
|
||
|
aaci_pcm_hw_free(substream);
|
||
|
if (aacirun->pcm_open) {
|
||
|
snd_ac97_pcm_close(aacirun->pcm);
|
||
|
aacirun->pcm_open = 0;
|
||
|
}
|
||
|
|
||
|
/* channels is already limited to 2, 4, or 6 by aaci_rule_channels */
|
||
|
if (dbl && channels != 2)
|
||
|
return -EINVAL;
|
||
|
|
||
|
err = snd_ac97_pcm_open(aacirun->pcm, rate, channels,
|
||
|
aacirun->pcm->r[dbl].slots);
|
||
|
|
||
|
aacirun->pcm_open = err == 0;
|
||
|
aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
|
||
|
aacirun->cr |= channels_to_slotmask[channels + dbl * 2];
|
||
|
|
||
|
/*
|
||
|
* fifo_bytes is the number of bytes we transfer to/from
|
||
|
* the FIFO, including padding. So that's x4. As we're
|
||
|
* in compact mode, the FIFO is half the size.
|
||
|
*/
|
||
|
aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2;
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_prepare(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
||
|
struct aaci_runtime *aacirun = runtime->private_data;
|
||
|
|
||
|
aacirun->period = snd_pcm_lib_period_bytes(substream);
|
||
|
aacirun->start = runtime->dma_area;
|
||
|
aacirun->end = aacirun->start + snd_pcm_lib_buffer_bytes(substream);
|
||
|
aacirun->ptr = aacirun->start;
|
||
|
aacirun->bytes = aacirun->period;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
||
|
struct aaci_runtime *aacirun = runtime->private_data;
|
||
|
ssize_t bytes = aacirun->ptr - aacirun->start;
|
||
|
|
||
|
return bytes_to_frames(runtime, bytes);
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Playback specific ALSA stuff
|
||
|
*/
|
||
|
static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun)
|
||
|
{
|
||
|
u32 ie;
|
||
|
|
||
|
ie = readl(aacirun->base + AACI_IE);
|
||
|
ie &= ~(IE_URIE|IE_TXIE);
|
||
|
writel(ie, aacirun->base + AACI_IE);
|
||
|
aacirun->cr &= ~CR_EN;
|
||
|
aaci_chan_wait_ready(aacirun, SR_TXB);
|
||
|
writel(aacirun->cr, aacirun->base + AACI_TXCR);
|
||
|
}
|
||
|
|
||
|
static void aaci_pcm_playback_start(struct aaci_runtime *aacirun)
|
||
|
{
|
||
|
u32 ie;
|
||
|
|
||
|
aaci_chan_wait_ready(aacirun, SR_TXB);
|
||
|
aacirun->cr |= CR_EN;
|
||
|
|
||
|
ie = readl(aacirun->base + AACI_IE);
|
||
|
ie |= IE_URIE | IE_TXIE;
|
||
|
writel(ie, aacirun->base + AACI_IE);
|
||
|
writel(aacirun->cr, aacirun->base + AACI_TXCR);
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd)
|
||
|
{
|
||
|
struct aaci_runtime *aacirun = substream->runtime->private_data;
|
||
|
unsigned long flags;
|
||
|
int ret = 0;
|
||
|
|
||
|
spin_lock_irqsave(&aacirun->lock, flags);
|
||
|
|
||
|
switch (cmd) {
|
||
|
case SNDRV_PCM_TRIGGER_START:
|
||
|
aaci_pcm_playback_start(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_RESUME:
|
||
|
aaci_pcm_playback_start(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_STOP:
|
||
|
aaci_pcm_playback_stop(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
||
|
aaci_pcm_playback_stop(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
}
|
||
|
|
||
|
spin_unlock_irqrestore(&aacirun->lock, flags);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static const struct snd_pcm_ops aaci_playback_ops = {
|
||
|
.open = aaci_pcm_open,
|
||
|
.close = aaci_pcm_close,
|
||
|
.hw_params = aaci_pcm_hw_params,
|
||
|
.hw_free = aaci_pcm_hw_free,
|
||
|
.prepare = aaci_pcm_prepare,
|
||
|
.trigger = aaci_pcm_playback_trigger,
|
||
|
.pointer = aaci_pcm_pointer,
|
||
|
};
|
||
|
|
||
|
static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
|
||
|
{
|
||
|
u32 ie;
|
||
|
|
||
|
aaci_chan_wait_ready(aacirun, SR_RXB);
|
||
|
|
||
|
ie = readl(aacirun->base + AACI_IE);
|
||
|
ie &= ~(IE_ORIE | IE_RXIE);
|
||
|
writel(ie, aacirun->base+AACI_IE);
|
||
|
|
||
|
aacirun->cr &= ~CR_EN;
|
||
|
|
||
|
writel(aacirun->cr, aacirun->base + AACI_RXCR);
|
||
|
}
|
||
|
|
||
|
static void aaci_pcm_capture_start(struct aaci_runtime *aacirun)
|
||
|
{
|
||
|
u32 ie;
|
||
|
|
||
|
aaci_chan_wait_ready(aacirun, SR_RXB);
|
||
|
|
||
|
#ifdef DEBUG
|
||
|
/* RX Timeout value: bits 28:17 in RXCR */
|
||
|
aacirun->cr |= 0xf << 17;
|
||
|
#endif
|
||
|
|
||
|
aacirun->cr |= CR_EN;
|
||
|
writel(aacirun->cr, aacirun->base + AACI_RXCR);
|
||
|
|
||
|
ie = readl(aacirun->base + AACI_IE);
|
||
|
ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full
|
||
|
writel(ie, aacirun->base + AACI_IE);
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd)
|
||
|
{
|
||
|
struct aaci_runtime *aacirun = substream->runtime->private_data;
|
||
|
unsigned long flags;
|
||
|
int ret = 0;
|
||
|
|
||
|
spin_lock_irqsave(&aacirun->lock, flags);
|
||
|
|
||
|
switch (cmd) {
|
||
|
case SNDRV_PCM_TRIGGER_START:
|
||
|
aaci_pcm_capture_start(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_RESUME:
|
||
|
aaci_pcm_capture_start(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_STOP:
|
||
|
aaci_pcm_capture_stop(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
||
|
aaci_pcm_capture_stop(aacirun);
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||
|
break;
|
||
|
|
||
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
}
|
||
|
|
||
|
spin_unlock_irqrestore(&aacirun->lock, flags);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int aaci_pcm_capture_prepare(struct snd_pcm_substream *substream)
|
||
|
{
|
||
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
||
|
struct aaci *aaci = substream->private_data;
|
||
|
|
||
|
aaci_pcm_prepare(substream);
|
||
|
|
||
|
/* allow changing of sample rate */
|
||
|
aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */
|
||
|
aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
|
||
|
aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate);
|
||
|
|
||
|
/* Record select: Mic: 0, Aux: 3, Line: 4 */
|
||
|
aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct snd_pcm_ops aaci_capture_ops = {
|
||
|
.open = aaci_pcm_open,
|
||
|
.close = aaci_pcm_close,
|
||
|
.hw_params = aaci_pcm_hw_params,
|
||
|
.hw_free = aaci_pcm_hw_free,
|
||
|
.prepare = aaci_pcm_capture_prepare,
|
||
|
.trigger = aaci_pcm_capture_trigger,
|
||
|
.pointer = aaci_pcm_pointer,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Power Management.
|
||
|
*/
|
||
|
#ifdef CONFIG_PM
|
||
|
static int aaci_do_suspend(struct snd_card *card)
|
||
|
{
|
||
|
struct aaci *aaci = card->private_data;
|
||
|
snd_power_change_state(card, SNDRV_CTL_POWER_D3cold);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int aaci_do_resume(struct snd_card *card)
|
||
|
{
|
||
|
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int aaci_suspend(struct device *dev)
|
||
|
{
|
||
|
struct snd_card *card = dev_get_drvdata(dev);
|
||
|
return card ? aaci_do_suspend(card) : 0;
|
||
|
}
|
||
|
|
||
|
static int aaci_resume(struct device *dev)
|
||
|
{
|
||
|
struct snd_card *card = dev_get_drvdata(dev);
|
||
|
return card ? aaci_do_resume(card) : 0;
|
||
|
}
|
||
|
|
||
|
static SIMPLE_DEV_PM_OPS(aaci_dev_pm_ops, aaci_suspend, aaci_resume);
|
||
|
#define AACI_DEV_PM_OPS (&aaci_dev_pm_ops)
|
||
|
#else
|
||
|
#define AACI_DEV_PM_OPS NULL
|
||
|
#endif
|
||
|
|
||
|
|
||
|
static const struct ac97_pcm ac97_defs[] = {
|
||
|
[0] = { /* Front PCM */
|
||
|
.exclusive = 1,
|
||
|
.r = {
|
||
|
[0] = {
|
||
|
.slots = (1 << AC97_SLOT_PCM_LEFT) |
|
||
|
(1 << AC97_SLOT_PCM_RIGHT) |
|
||
|
(1 << AC97_SLOT_PCM_CENTER) |
|
||
|
(1 << AC97_SLOT_PCM_SLEFT) |
|
||
|
(1 << AC97_SLOT_PCM_SRIGHT) |
|
||
|
(1 << AC97_SLOT_LFE),
|
||
|
},
|
||
|
[1] = {
|
||
|
.slots = (1 << AC97_SLOT_PCM_LEFT) |
|
||
|
(1 << AC97_SLOT_PCM_RIGHT) |
|
||
|
(1 << AC97_SLOT_PCM_LEFT_0) |
|
||
|
(1 << AC97_SLOT_PCM_RIGHT_0),
|
||
|
},
|
||
|
},
|
||
|
},
|
||
|
[1] = { /* PCM in */
|
||
|
.stream = 1,
|
||
|
.exclusive = 1,
|
||
|
.r = {
|
||
|
[0] = {
|
||
|
.slots = (1 << AC97_SLOT_PCM_LEFT) |
|
||
|
(1 << AC97_SLOT_PCM_RIGHT),
|
||
|
},
|
||
|
},
|
||
|
},
|
||
|
[2] = { /* Mic in */
|
||
|
.stream = 1,
|
||
|
.exclusive = 1,
|
||
|
.r = {
|
||
|
[0] = {
|
||
|
.slots = (1 << AC97_SLOT_MIC),
|
||
|
},
|
||
|
},
|
||
|
}
|
||
|
};
|
||
|
|
||
|
static const struct snd_ac97_bus_ops aaci_bus_ops = {
|
||
|
.write = aaci_ac97_write,
|
||
|
.read = aaci_ac97_read,
|
||
|
};
|
||
|
|
||
|
static int aaci_probe_ac97(struct aaci *aaci)
|
||
|
{
|
||
|
struct snd_ac97_template ac97_template;
|
||
|
struct snd_ac97_bus *ac97_bus;
|
||
|
struct snd_ac97 *ac97;
|
||
|
int ret;
|
||
|
|
||
|
/*
|
||
|
* Assert AACIRESET for 2us
|
||
|
*/
|
||
|
writel(0, aaci->base + AACI_RESET);
|
||
|
udelay(2);
|
||
|
writel(RESET_NRST, aaci->base + AACI_RESET);
|
||
|
|
||
|
/*
|
||
|
* Give the AC'97 codec more than enough time
|
||
|
* to wake up. (42us = ~2 frames at 48kHz.)
|
||
|
*/
|
||
|
udelay(FRAME_PERIOD_US * 2);
|
||
|
|
||
|
ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
ac97_bus->clock = 48000;
|
||
|
aaci->ac97_bus = ac97_bus;
|
||
|
|
||
|
memset(&ac97_template, 0, sizeof(struct snd_ac97_template));
|
||
|
ac97_template.private_data = aaci;
|
||
|
ac97_template.num = 0;
|
||
|
ac97_template.scaps = AC97_SCAP_SKIP_MODEM;
|
||
|
|
||
|
ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
aaci->ac97 = ac97;
|
||
|
|
||
|
/*
|
||
|
* Disable AC97 PC Beep input on audio codecs.
|
||
|
*/
|
||
|
if (ac97_is_audio(ac97))
|
||
|
snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x801e);
|
||
|
|
||
|
ret = snd_ac97_pcm_assign(ac97_bus, ARRAY_SIZE(ac97_defs), ac97_defs);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
aaci->playback.pcm = &ac97_bus->pcms[0];
|
||
|
aaci->capture.pcm = &ac97_bus->pcms[1];
|
||
|
|
||
|
out:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void aaci_free_card(struct snd_card *card)
|
||
|
{
|
||
|
struct aaci *aaci = card->private_data;
|
||
|
|
||
|
iounmap(aaci->base);
|
||
|
}
|
||
|
|
||
|
static struct aaci *aaci_init_card(struct amba_device *dev)
|
||
|
{
|
||
|
struct aaci *aaci;
|
||
|
struct snd_card *card;
|
||
|
int err;
|
||
|
|
||
|
err = snd_card_new(&dev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1,
|
||
|
THIS_MODULE, sizeof(struct aaci), &card);
|
||
|
if (err < 0)
|
||
|
return NULL;
|
||
|
|
||
|
card->private_free = aaci_free_card;
|
||
|
|
||
|
strscpy(card->driver, DRIVER_NAME, sizeof(card->driver));
|
||
|
strscpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname));
|
||
|
snprintf(card->longname, sizeof(card->longname),
|
||
|
"%s PL%03x rev%u at 0x%08llx, irq %d",
|
||
|
card->shortname, amba_part(dev), amba_rev(dev),
|
||
|
(unsigned long long)dev->res.start, dev->irq[0]);
|
||
|
|
||
|
aaci = card->private_data;
|
||
|
mutex_init(&aaci->ac97_sem);
|
||
|
mutex_init(&aaci->irq_lock);
|
||
|
aaci->card = card;
|
||
|
aaci->dev = dev;
|
||
|
|
||
|
/* Set MAINCR to allow slot 1 and 2 data IO */
|
||
|
aaci->maincr = MAINCR_IE | MAINCR_SL1RXEN | MAINCR_SL1TXEN |
|
||
|
MAINCR_SL2RXEN | MAINCR_SL2TXEN;
|
||
|
|
||
|
return aaci;
|
||
|
}
|
||
|
|
||
|
static int aaci_init_pcm(struct aaci *aaci)
|
||
|
{
|
||
|
struct snd_pcm *pcm;
|
||
|
int ret;
|
||
|
|
||
|
ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm);
|
||
|
if (ret == 0) {
|
||
|
aaci->pcm = pcm;
|
||
|
pcm->private_data = aaci;
|
||
|
pcm->info_flags = 0;
|
||
|
|
||
|
strscpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
|
||
|
|
||
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops);
|
||
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops);
|
||
|
snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
|
||
|
aaci->card->dev,
|
||
|
0, 64 * 1024);
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static unsigned int aaci_size_fifo(struct aaci *aaci)
|
||
|
{
|
||
|
struct aaci_runtime *aacirun = &aaci->playback;
|
||
|
int i;
|
||
|
|
||
|
/*
|
||
|
* Enable the channel, but don't assign it to any slots, so
|
||
|
* it won't empty onto the AC'97 link.
|
||
|
*/
|
||
|
writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
|
||
|
|
||
|
for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
|
||
|
writel(0, aacirun->fifo);
|
||
|
|
||
|
writel(0, aacirun->base + AACI_TXCR);
|
||
|
|
||
|
/*
|
||
|
* Re-initialise the AACI after the FIFO depth test, to
|
||
|
* ensure that the FIFOs are empty. Unfortunately, merely
|
||
|
* disabling the channel doesn't clear the FIFO.
|
||
|
*/
|
||
|
writel(aaci->maincr & ~MAINCR_IE, aaci->base + AACI_MAINCR);
|
||
|
readl(aaci->base + AACI_MAINCR);
|
||
|
udelay(1);
|
||
|
writel(aaci->maincr, aaci->base + AACI_MAINCR);
|
||
|
|
||
|
/*
|
||
|
* If we hit 4096 entries, we failed. Go back to the specified
|
||
|
* fifo depth.
|
||
|
*/
|
||
|
if (i == 4096)
|
||
|
i = 8;
|
||
|
|
||
|
return i;
|
||
|
}
|
||
|
|
||
|
static int aaci_probe(struct amba_device *dev,
|
||
|
const struct amba_id *id)
|
||
|
{
|
||
|
struct aaci *aaci;
|
||
|
int ret, i;
|
||
|
|
||
|
ret = amba_request_regions(dev, NULL);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
aaci = aaci_init_card(dev);
|
||
|
if (!aaci) {
|
||
|
ret = -ENOMEM;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
|
||
|
if (!aaci->base) {
|
||
|
ret = -ENOMEM;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Playback uses AACI channel 0
|
||
|
*/
|
||
|
spin_lock_init(&aaci->playback.lock);
|
||
|
aaci->playback.base = aaci->base + AACI_CSCH1;
|
||
|
aaci->playback.fifo = aaci->base + AACI_DR1;
|
||
|
|
||
|
/*
|
||
|
* Capture uses AACI channel 0
|
||
|
*/
|
||
|
spin_lock_init(&aaci->capture.lock);
|
||
|
aaci->capture.base = aaci->base + AACI_CSCH1;
|
||
|
aaci->capture.fifo = aaci->base + AACI_DR1;
|
||
|
|
||
|
for (i = 0; i < 4; i++) {
|
||
|
void __iomem *base = aaci->base + i * 0x14;
|
||
|
|
||
|
writel(0, base + AACI_IE);
|
||
|
writel(0, base + AACI_TXCR);
|
||
|
writel(0, base + AACI_RXCR);
|
||
|
}
|
||
|
|
||
|
writel(0x1fff, aaci->base + AACI_INTCLR);
|
||
|
writel(aaci->maincr, aaci->base + AACI_MAINCR);
|
||
|
/*
|
||
|
* Fix: ac97 read back fail errors by reading
|
||
|
* from any arbitrary aaci register.
|
||
|
*/
|
||
|
readl(aaci->base + AACI_CSCH1);
|
||
|
ret = aaci_probe_ac97(aaci);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
/*
|
||
|
* Size the FIFOs (must be multiple of 16).
|
||
|
* This is the number of entries in the FIFO.
|
||
|
*/
|
||
|
aaci->fifo_depth = aaci_size_fifo(aaci);
|
||
|
if (aaci->fifo_depth & 15) {
|
||
|
printk(KERN_WARNING "AACI: FIFO depth %d not supported\n",
|
||
|
aaci->fifo_depth);
|
||
|
ret = -ENODEV;
|
||
|
goto out;
|
||
|
}
|
||
|
|
||
|
ret = aaci_init_pcm(aaci);
|
||
|
if (ret)
|
||
|
goto out;
|
||
|
|
||
|
ret = snd_card_register(aaci->card);
|
||
|
if (ret == 0) {
|
||
|
dev_info(&dev->dev, "%s\n", aaci->card->longname);
|
||
|
dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth);
|
||
|
amba_set_drvdata(dev, aaci->card);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
out:
|
||
|
if (aaci)
|
||
|
snd_card_free(aaci->card);
|
||
|
amba_release_regions(dev);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void aaci_remove(struct amba_device *dev)
|
||
|
{
|
||
|
struct snd_card *card = amba_get_drvdata(dev);
|
||
|
|
||
|
if (card) {
|
||
|
struct aaci *aaci = card->private_data;
|
||
|
writel(0, aaci->base + AACI_MAINCR);
|
||
|
|
||
|
snd_card_free(card);
|
||
|
amba_release_regions(dev);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static struct amba_id aaci_ids[] = {
|
||
|
{
|
||
|
.id = 0x00041041,
|
||
|
.mask = 0x000fffff,
|
||
|
},
|
||
|
{ 0, 0 },
|
||
|
};
|
||
|
|
||
|
MODULE_DEVICE_TABLE(amba, aaci_ids);
|
||
|
|
||
|
static struct amba_driver aaci_driver = {
|
||
|
.drv = {
|
||
|
.name = DRIVER_NAME,
|
||
|
.pm = AACI_DEV_PM_OPS,
|
||
|
},
|
||
|
.probe = aaci_probe,
|
||
|
.remove = aaci_remove,
|
||
|
.id_table = aaci_ids,
|
||
|
};
|
||
|
|
||
|
module_amba_driver(aaci_driver);
|
||
|
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver");
|