linuxdebug/fs/btrfs/delalloc-space.c

497 lines
17 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0
#include "ctree.h"
#include "delalloc-space.h"
#include "block-rsv.h"
#include "btrfs_inode.h"
#include "space-info.h"
#include "transaction.h"
#include "qgroup.h"
#include "block-group.h"
/*
* HOW DOES THIS WORK
*
* There are two stages to data reservations, one for data and one for metadata
* to handle the new extents and checksums generated by writing data.
*
*
* DATA RESERVATION
* The general flow of the data reservation is as follows
*
* -> Reserve
* We call into btrfs_reserve_data_bytes() for the user request bytes that
* they wish to write. We make this reservation and add it to
* space_info->bytes_may_use. We set EXTENT_DELALLOC on the inode io_tree
* for the range and carry on if this is buffered, or follow up trying to
* make a real allocation if we are pre-allocating or doing O_DIRECT.
*
* -> Use
* At writepages()/prealloc/O_DIRECT time we will call into
* btrfs_reserve_extent() for some part or all of this range of bytes. We
* will make the allocation and subtract space_info->bytes_may_use by the
* original requested length and increase the space_info->bytes_reserved by
* the allocated length. This distinction is important because compression
* may allocate a smaller on disk extent than we previously reserved.
*
* -> Allocation
* finish_ordered_io() will insert the new file extent item for this range,
* and then add a delayed ref update for the extent tree. Once that delayed
* ref is written the extent size is subtracted from
* space_info->bytes_reserved and added to space_info->bytes_used.
*
* Error handling
*
* -> By the reservation maker
* This is the simplest case, we haven't completed our operation and we know
* how much we reserved, we can simply call
* btrfs_free_reserved_data_space*() and it will be removed from
* space_info->bytes_may_use.
*
* -> After the reservation has been made, but before cow_file_range()
* This is specifically for the delalloc case. You must clear
* EXTENT_DELALLOC with the EXTENT_CLEAR_DATA_RESV bit, and the range will
* be subtracted from space_info->bytes_may_use.
*
* METADATA RESERVATION
* The general metadata reservation lifetimes are discussed elsewhere, this
* will just focus on how it is used for delalloc space.
*
* We keep track of two things on a per inode bases
*
* ->outstanding_extents
* This is the number of file extent items we'll need to handle all of the
* outstanding DELALLOC space we have in this inode. We limit the maximum
* size of an extent, so a large contiguous dirty area may require more than
* one outstanding_extent, which is why count_max_extents() is used to
* determine how many outstanding_extents get added.
*
* ->csum_bytes
* This is essentially how many dirty bytes we have for this inode, so we
* can calculate the number of checksum items we would have to add in order
* to checksum our outstanding data.
*
* We keep a per-inode block_rsv in order to make it easier to keep track of
* our reservation. We use btrfs_calculate_inode_block_rsv_size() to
* calculate the current theoretical maximum reservation we would need for the
* metadata for this inode. We call this and then adjust our reservation as
* necessary, either by attempting to reserve more space, or freeing up excess
* space.
*
* OUTSTANDING_EXTENTS HANDLING
*
* ->outstanding_extents is used for keeping track of how many extents we will
* need to use for this inode, and it will fluctuate depending on where you are
* in the life cycle of the dirty data. Consider the following normal case for
* a completely clean inode, with a num_bytes < our maximum allowed extent size
*
* -> reserve
* ->outstanding_extents += 1 (current value is 1)
*
* -> set_delalloc
* ->outstanding_extents += 1 (current value is 2)
*
* -> btrfs_delalloc_release_extents()
* ->outstanding_extents -= 1 (current value is 1)
*
* We must call this once we are done, as we hold our reservation for the
* duration of our operation, and then assume set_delalloc will update the
* counter appropriately.
*
* -> add ordered extent
* ->outstanding_extents += 1 (current value is 2)
*
* -> btrfs_clear_delalloc_extent
* ->outstanding_extents -= 1 (current value is 1)
*
* -> finish_ordered_io/btrfs_remove_ordered_extent
* ->outstanding_extents -= 1 (current value is 0)
*
* Each stage is responsible for their own accounting of the extent, thus
* making error handling and cleanup easier.
*/
int btrfs_alloc_data_chunk_ondemand(struct btrfs_inode *inode, u64 bytes)
{
struct btrfs_root *root = inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_FLUSH_DATA;
/* Make sure bytes are sectorsize aligned */
bytes = ALIGN(bytes, fs_info->sectorsize);
if (btrfs_is_free_space_inode(inode))
flush = BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE;
return btrfs_reserve_data_bytes(fs_info, bytes, flush);
}
int btrfs_check_data_free_space(struct btrfs_inode *inode,
struct extent_changeset **reserved, u64 start,
u64 len, bool noflush)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_FLUSH_DATA;
int ret;
/* align the range */
len = round_up(start + len, fs_info->sectorsize) -
round_down(start, fs_info->sectorsize);
start = round_down(start, fs_info->sectorsize);
if (noflush)
flush = BTRFS_RESERVE_NO_FLUSH;
else if (btrfs_is_free_space_inode(inode))
flush = BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE;
ret = btrfs_reserve_data_bytes(fs_info, len, flush);
if (ret < 0)
return ret;
/* Use new btrfs_qgroup_reserve_data to reserve precious data space. */
ret = btrfs_qgroup_reserve_data(inode, reserved, start, len);
if (ret < 0) {
btrfs_free_reserved_data_space_noquota(fs_info, len);
extent_changeset_free(*reserved);
*reserved = NULL;
} else {
ret = 0;
}
return ret;
}
/*
* Called if we need to clear a data reservation for this inode
* Normally in a error case.
*
* This one will *NOT* use accurate qgroup reserved space API, just for case
* which we can't sleep and is sure it won't affect qgroup reserved space.
* Like clear_bit_hook().
*/
void btrfs_free_reserved_data_space_noquota(struct btrfs_fs_info *fs_info,
u64 len)
{
struct btrfs_space_info *data_sinfo;
ASSERT(IS_ALIGNED(len, fs_info->sectorsize));
data_sinfo = fs_info->data_sinfo;
btrfs_space_info_free_bytes_may_use(fs_info, data_sinfo, len);
}
/*
* Called if we need to clear a data reservation for this inode
* Normally in a error case.
*
* This one will handle the per-inode data rsv map for accurate reserved
* space framework.
*/
void btrfs_free_reserved_data_space(struct btrfs_inode *inode,
struct extent_changeset *reserved, u64 start, u64 len)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
/* Make sure the range is aligned to sectorsize */
len = round_up(start + len, fs_info->sectorsize) -
round_down(start, fs_info->sectorsize);
start = round_down(start, fs_info->sectorsize);
btrfs_free_reserved_data_space_noquota(fs_info, len);
btrfs_qgroup_free_data(inode, reserved, start, len);
}
/**
* Release any excessive reservation
*
* @inode: the inode we need to release from
* @qgroup_free: free or convert qgroup meta. Unlike normal operation, qgroup
* meta reservation needs to know if we are freeing qgroup
* reservation or just converting it into per-trans. Normally
* @qgroup_free is true for error handling, and false for normal
* release.
*
* This is the same as btrfs_block_rsv_release, except that it handles the
* tracepoint for the reservation.
*/
static void btrfs_inode_rsv_release(struct btrfs_inode *inode, bool qgroup_free)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 released = 0;
u64 qgroup_to_release = 0;
/*
* Since we statically set the block_rsv->size we just want to say we
* are releasing 0 bytes, and then we'll just get the reservation over
* the size free'd.
*/
released = btrfs_block_rsv_release(fs_info, block_rsv, 0,
&qgroup_to_release);
if (released > 0)
trace_btrfs_space_reservation(fs_info, "delalloc",
btrfs_ino(inode), released, 0);
if (qgroup_free)
btrfs_qgroup_free_meta_prealloc(inode->root, qgroup_to_release);
else
btrfs_qgroup_convert_reserved_meta(inode->root,
qgroup_to_release);
}
static void btrfs_calculate_inode_block_rsv_size(struct btrfs_fs_info *fs_info,
struct btrfs_inode *inode)
{
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 reserve_size = 0;
u64 qgroup_rsv_size = 0;
u64 csum_leaves;
unsigned outstanding_extents;
lockdep_assert_held(&inode->lock);
outstanding_extents = inode->outstanding_extents;
/*
* Insert size for the number of outstanding extents, 1 normal size for
* updating the inode.
*/
if (outstanding_extents) {
reserve_size = btrfs_calc_insert_metadata_size(fs_info,
outstanding_extents);
reserve_size += btrfs_calc_metadata_size(fs_info, 1);
}
csum_leaves = btrfs_csum_bytes_to_leaves(fs_info,
inode->csum_bytes);
reserve_size += btrfs_calc_insert_metadata_size(fs_info,
csum_leaves);
/*
* For qgroup rsv, the calculation is very simple:
* account one nodesize for each outstanding extent
*
* This is overestimating in most cases.
*/
qgroup_rsv_size = (u64)outstanding_extents * fs_info->nodesize;
spin_lock(&block_rsv->lock);
block_rsv->size = reserve_size;
block_rsv->qgroup_rsv_size = qgroup_rsv_size;
spin_unlock(&block_rsv->lock);
}
static void calc_inode_reservations(struct btrfs_fs_info *fs_info,
u64 num_bytes, u64 disk_num_bytes,
u64 *meta_reserve, u64 *qgroup_reserve)
{
u64 nr_extents = count_max_extents(fs_info, num_bytes);
u64 csum_leaves = btrfs_csum_bytes_to_leaves(fs_info, disk_num_bytes);
u64 inode_update = btrfs_calc_metadata_size(fs_info, 1);
*meta_reserve = btrfs_calc_insert_metadata_size(fs_info,
nr_extents + csum_leaves);
/*
* finish_ordered_io has to update the inode, so add the space required
* for an inode update.
*/
*meta_reserve += inode_update;
*qgroup_reserve = nr_extents * fs_info->nodesize;
}
int btrfs_delalloc_reserve_metadata(struct btrfs_inode *inode, u64 num_bytes,
u64 disk_num_bytes, bool noflush)
{
struct btrfs_root *root = inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 meta_reserve, qgroup_reserve;
unsigned nr_extents;
enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_FLUSH_ALL;
int ret = 0;
/*
* If we are a free space inode we need to not flush since we will be in
* the middle of a transaction commit. We also don't need the delalloc
* mutex since we won't race with anybody. We need this mostly to make
* lockdep shut its filthy mouth.
*
* If we have a transaction open (can happen if we call truncate_block
* from truncate), then we need FLUSH_LIMIT so we don't deadlock.
*/
if (noflush || btrfs_is_free_space_inode(inode)) {
flush = BTRFS_RESERVE_NO_FLUSH;
} else {
if (current->journal_info)
flush = BTRFS_RESERVE_FLUSH_LIMIT;
if (btrfs_transaction_in_commit(fs_info))
schedule_timeout(1);
}
num_bytes = ALIGN(num_bytes, fs_info->sectorsize);
disk_num_bytes = ALIGN(disk_num_bytes, fs_info->sectorsize);
/*
* We always want to do it this way, every other way is wrong and ends
* in tears. Pre-reserving the amount we are going to add will always
* be the right way, because otherwise if we have enough parallelism we
* could end up with thousands of inodes all holding little bits of
* reservations they were able to make previously and the only way to
* reclaim that space is to ENOSPC out the operations and clear
* everything out and try again, which is bad. This way we just
* over-reserve slightly, and clean up the mess when we are done.
*/
calc_inode_reservations(fs_info, num_bytes, disk_num_bytes,
&meta_reserve, &qgroup_reserve);
ret = btrfs_qgroup_reserve_meta_prealloc(root, qgroup_reserve, true,
noflush);
if (ret)
return ret;
ret = btrfs_reserve_metadata_bytes(fs_info, block_rsv, meta_reserve, flush);
if (ret) {
btrfs_qgroup_free_meta_prealloc(root, qgroup_reserve);
return ret;
}
/*
* Now we need to update our outstanding extents and csum bytes _first_
* and then add the reservation to the block_rsv. This keeps us from
* racing with an ordered completion or some such that would think it
* needs to free the reservation we just made.
*/
spin_lock(&inode->lock);
nr_extents = count_max_extents(fs_info, num_bytes);
btrfs_mod_outstanding_extents(inode, nr_extents);
inode->csum_bytes += disk_num_bytes;
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
/* Now we can safely add our space to our block rsv */
btrfs_block_rsv_add_bytes(block_rsv, meta_reserve, false);
trace_btrfs_space_reservation(root->fs_info, "delalloc",
btrfs_ino(inode), meta_reserve, 1);
spin_lock(&block_rsv->lock);
block_rsv->qgroup_rsv_reserved += qgroup_reserve;
spin_unlock(&block_rsv->lock);
return 0;
}
/**
* Release a metadata reservation for an inode
*
* @inode: the inode to release the reservation for.
* @num_bytes: the number of bytes we are releasing.
* @qgroup_free: free qgroup reservation or convert it to per-trans reservation
*
* This will release the metadata reservation for an inode. This can be called
* once we complete IO for a given set of bytes to release their metadata
* reservations, or on error for the same reason.
*/
void btrfs_delalloc_release_metadata(struct btrfs_inode *inode, u64 num_bytes,
bool qgroup_free)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
num_bytes = ALIGN(num_bytes, fs_info->sectorsize);
spin_lock(&inode->lock);
inode->csum_bytes -= num_bytes;
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
if (btrfs_is_testing(fs_info))
return;
btrfs_inode_rsv_release(inode, qgroup_free);
}
/**
* btrfs_delalloc_release_extents - release our outstanding_extents
* @inode: the inode to balance the reservation for.
* @num_bytes: the number of bytes we originally reserved with
*
* When we reserve space we increase outstanding_extents for the extents we may
* add. Once we've set the range as delalloc or created our ordered extents we
* have outstanding_extents to track the real usage, so we use this to free our
* temporarily tracked outstanding_extents. This _must_ be used in conjunction
* with btrfs_delalloc_reserve_metadata.
*/
void btrfs_delalloc_release_extents(struct btrfs_inode *inode, u64 num_bytes)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
unsigned num_extents;
spin_lock(&inode->lock);
num_extents = count_max_extents(fs_info, num_bytes);
btrfs_mod_outstanding_extents(inode, -num_extents);
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
if (btrfs_is_testing(fs_info))
return;
btrfs_inode_rsv_release(inode, true);
}
/**
* btrfs_delalloc_reserve_space - reserve data and metadata space for
* delalloc
* @inode: inode we're writing to
* @start: start range we are writing to
* @len: how long the range we are writing to
* @reserved: mandatory parameter, record actually reserved qgroup ranges of
* current reservation.
*
* This will do the following things
*
* - reserve space in data space info for num bytes
* and reserve precious corresponding qgroup space
* (Done in check_data_free_space)
*
* - reserve space for metadata space, based on the number of outstanding
* extents and how much csums will be needed
* also reserve metadata space in a per root over-reserve method.
* - add to the inodes->delalloc_bytes
* - add it to the fs_info's delalloc inodes list.
* (Above 3 all done in delalloc_reserve_metadata)
*
* Return 0 for success
* Return <0 for error(-ENOSPC or -EQUOT)
*/
int btrfs_delalloc_reserve_space(struct btrfs_inode *inode,
struct extent_changeset **reserved, u64 start, u64 len)
{
int ret;
ret = btrfs_check_data_free_space(inode, reserved, start, len, false);
if (ret < 0)
return ret;
ret = btrfs_delalloc_reserve_metadata(inode, len, len, false);
if (ret < 0) {
btrfs_free_reserved_data_space(inode, *reserved, start, len);
extent_changeset_free(*reserved);
*reserved = NULL;
}
return ret;
}
/**
* Release data and metadata space for delalloc
*
* @inode: inode we're releasing space for
* @reserved: list of changed/reserved ranges
* @start: start position of the space already reserved
* @len: length of the space already reserved
* @qgroup_free: should qgroup reserved-space also be freed
*
* This function will release the metadata space that was not used and will
* decrement ->delalloc_bytes and remove it from the fs_info delalloc_inodes
* list if there are no delalloc bytes left.
* Also it will handle the qgroup reserved space.
*/
void btrfs_delalloc_release_space(struct btrfs_inode *inode,
struct extent_changeset *reserved,
u64 start, u64 len, bool qgroup_free)
{
btrfs_delalloc_release_metadata(inode, len, qgroup_free);
btrfs_free_reserved_data_space(inode, reserved, start, len);
}