665 lines
18 KiB
C
665 lines
18 KiB
C
|
// SPDX-License-Identifier: GPL-2.0+
|
||
|
/*
|
||
|
* intel TCO Watchdog Driver
|
||
|
*
|
||
|
* (c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
|
||
|
*
|
||
|
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
|
||
|
* provide warranty for any of this software. This material is
|
||
|
* provided "AS-IS" and at no charge.
|
||
|
*
|
||
|
* The TCO watchdog is implemented in the following I/O controller hubs:
|
||
|
* (See the intel documentation on http://developer.intel.com.)
|
||
|
* document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO)
|
||
|
* document number 290687-002, 298242-027: 82801BA (ICH2)
|
||
|
* document number 290733-003, 290739-013: 82801CA (ICH3-S)
|
||
|
* document number 290716-001, 290718-007: 82801CAM (ICH3-M)
|
||
|
* document number 290744-001, 290745-025: 82801DB (ICH4)
|
||
|
* document number 252337-001, 252663-008: 82801DBM (ICH4-M)
|
||
|
* document number 273599-001, 273645-002: 82801E (C-ICH)
|
||
|
* document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R)
|
||
|
* document number 300641-004, 300884-013: 6300ESB
|
||
|
* document number 301473-002, 301474-026: 82801F (ICH6)
|
||
|
* document number 313082-001, 313075-006: 631xESB, 632xESB
|
||
|
* document number 307013-003, 307014-024: 82801G (ICH7)
|
||
|
* document number 322896-001, 322897-001: NM10
|
||
|
* document number 313056-003, 313057-017: 82801H (ICH8)
|
||
|
* document number 316972-004, 316973-012: 82801I (ICH9)
|
||
|
* document number 319973-002, 319974-002: 82801J (ICH10)
|
||
|
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
|
||
|
* document number 320066-003, 320257-008: EP80597 (IICH)
|
||
|
* document number 324645-001, 324646-001: Cougar Point (CPT)
|
||
|
* document number TBD : Patsburg (PBG)
|
||
|
* document number TBD : DH89xxCC
|
||
|
* document number TBD : Panther Point
|
||
|
* document number TBD : Lynx Point
|
||
|
* document number TBD : Lynx Point-LP
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* Includes, defines, variables, module parameters, ...
|
||
|
*/
|
||
|
|
||
|
/* Module and version information */
|
||
|
#define DRV_NAME "iTCO_wdt"
|
||
|
#define DRV_VERSION "1.11"
|
||
|
|
||
|
/* Includes */
|
||
|
#include <linux/acpi.h> /* For ACPI support */
|
||
|
#include <linux/bits.h> /* For BIT() */
|
||
|
#include <linux/module.h> /* For module specific items */
|
||
|
#include <linux/moduleparam.h> /* For new moduleparam's */
|
||
|
#include <linux/types.h> /* For standard types (like size_t) */
|
||
|
#include <linux/errno.h> /* For the -ENODEV/... values */
|
||
|
#include <linux/kernel.h> /* For printk/panic/... */
|
||
|
#include <linux/watchdog.h> /* For the watchdog specific items */
|
||
|
#include <linux/init.h> /* For __init/__exit/... */
|
||
|
#include <linux/fs.h> /* For file operations */
|
||
|
#include <linux/platform_device.h> /* For platform_driver framework */
|
||
|
#include <linux/pci.h> /* For pci functions */
|
||
|
#include <linux/ioport.h> /* For io-port access */
|
||
|
#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
|
||
|
#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
|
||
|
#include <linux/io.h> /* For inb/outb/... */
|
||
|
#include <linux/platform_data/itco_wdt.h>
|
||
|
#include <linux/mfd/intel_pmc_bxt.h>
|
||
|
|
||
|
#include "iTCO_vendor.h"
|
||
|
|
||
|
/* Address definitions for the TCO */
|
||
|
/* TCO base address */
|
||
|
#define TCOBASE(p) ((p)->tco_res->start)
|
||
|
/* SMI Control and Enable Register */
|
||
|
#define SMI_EN(p) ((p)->smi_res->start)
|
||
|
|
||
|
#define TCO_RLD(p) (TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */
|
||
|
#define TCOv1_TMR(p) (TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/
|
||
|
#define TCO_DAT_IN(p) (TCOBASE(p) + 0x02) /* TCO Data In Register */
|
||
|
#define TCO_DAT_OUT(p) (TCOBASE(p) + 0x03) /* TCO Data Out Register */
|
||
|
#define TCO1_STS(p) (TCOBASE(p) + 0x04) /* TCO1 Status Register */
|
||
|
#define TCO2_STS(p) (TCOBASE(p) + 0x06) /* TCO2 Status Register */
|
||
|
#define TCO1_CNT(p) (TCOBASE(p) + 0x08) /* TCO1 Control Register */
|
||
|
#define TCO2_CNT(p) (TCOBASE(p) + 0x0a) /* TCO2 Control Register */
|
||
|
#define TCOv2_TMR(p) (TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/
|
||
|
|
||
|
/* internal variables */
|
||
|
struct iTCO_wdt_private {
|
||
|
struct watchdog_device wddev;
|
||
|
|
||
|
/* TCO version/generation */
|
||
|
unsigned int iTCO_version;
|
||
|
struct resource *tco_res;
|
||
|
struct resource *smi_res;
|
||
|
/*
|
||
|
* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
|
||
|
* or memory-mapped PMC register bit 4 (TCO version 3).
|
||
|
*/
|
||
|
unsigned long __iomem *gcs_pmc;
|
||
|
/* the lock for io operations */
|
||
|
spinlock_t io_lock;
|
||
|
/* the PCI-device */
|
||
|
struct pci_dev *pci_dev;
|
||
|
/* whether or not the watchdog has been suspended */
|
||
|
bool suspended;
|
||
|
/* no reboot API private data */
|
||
|
void *no_reboot_priv;
|
||
|
/* no reboot update function pointer */
|
||
|
int (*update_no_reboot_bit)(void *p, bool set);
|
||
|
};
|
||
|
|
||
|
/* module parameters */
|
||
|
#define WATCHDOG_TIMEOUT 30 /* 30 sec default heartbeat */
|
||
|
static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */
|
||
|
module_param(heartbeat, int, 0);
|
||
|
MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
|
||
|
"5..76 (TCO v1) or 3..614 (TCO v2), default="
|
||
|
__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
|
||
|
|
||
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
||
|
module_param(nowayout, bool, 0);
|
||
|
MODULE_PARM_DESC(nowayout,
|
||
|
"Watchdog cannot be stopped once started (default="
|
||
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
||
|
|
||
|
static int turn_SMI_watchdog_clear_off = 1;
|
||
|
module_param(turn_SMI_watchdog_clear_off, int, 0);
|
||
|
MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
|
||
|
"Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
|
||
|
|
||
|
/*
|
||
|
* Some TCO specific functions
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* The iTCO v1 and v2's internal timer is stored as ticks which decrement
|
||
|
* every 0.6 seconds. v3's internal timer is stored as seconds (some
|
||
|
* datasheets incorrectly state 0.6 seconds).
|
||
|
*/
|
||
|
static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p,
|
||
|
int secs)
|
||
|
{
|
||
|
return p->iTCO_version == 3 ? secs : (secs * 10) / 6;
|
||
|
}
|
||
|
|
||
|
static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p,
|
||
|
int ticks)
|
||
|
{
|
||
|
return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10;
|
||
|
}
|
||
|
|
||
|
static inline u32 no_reboot_bit(struct iTCO_wdt_private *p)
|
||
|
{
|
||
|
u32 enable_bit;
|
||
|
|
||
|
switch (p->iTCO_version) {
|
||
|
case 5:
|
||
|
case 3:
|
||
|
enable_bit = 0x00000010;
|
||
|
break;
|
||
|
case 2:
|
||
|
enable_bit = 0x00000020;
|
||
|
break;
|
||
|
case 4:
|
||
|
case 1:
|
||
|
default:
|
||
|
enable_bit = 0x00000002;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return enable_bit;
|
||
|
}
|
||
|
|
||
|
static int update_no_reboot_bit_def(void *priv, bool set)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int update_no_reboot_bit_pci(void *priv, bool set)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = priv;
|
||
|
u32 val32 = 0, newval32 = 0;
|
||
|
|
||
|
pci_read_config_dword(p->pci_dev, 0xd4, &val32);
|
||
|
if (set)
|
||
|
val32 |= no_reboot_bit(p);
|
||
|
else
|
||
|
val32 &= ~no_reboot_bit(p);
|
||
|
pci_write_config_dword(p->pci_dev, 0xd4, val32);
|
||
|
pci_read_config_dword(p->pci_dev, 0xd4, &newval32);
|
||
|
|
||
|
/* make sure the update is successful */
|
||
|
if (val32 != newval32)
|
||
|
return -EIO;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int update_no_reboot_bit_mem(void *priv, bool set)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = priv;
|
||
|
u32 val32 = 0, newval32 = 0;
|
||
|
|
||
|
val32 = readl(p->gcs_pmc);
|
||
|
if (set)
|
||
|
val32 |= no_reboot_bit(p);
|
||
|
else
|
||
|
val32 &= ~no_reboot_bit(p);
|
||
|
writel(val32, p->gcs_pmc);
|
||
|
newval32 = readl(p->gcs_pmc);
|
||
|
|
||
|
/* make sure the update is successful */
|
||
|
if (val32 != newval32)
|
||
|
return -EIO;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int update_no_reboot_bit_cnt(void *priv, bool set)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = priv;
|
||
|
u16 val, newval;
|
||
|
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
if (set)
|
||
|
val |= BIT(0);
|
||
|
else
|
||
|
val &= ~BIT(0);
|
||
|
outw(val, TCO1_CNT(p));
|
||
|
newval = inw(TCO1_CNT(p));
|
||
|
|
||
|
/* make sure the update is successful */
|
||
|
return val != newval ? -EIO : 0;
|
||
|
}
|
||
|
|
||
|
static int update_no_reboot_bit_pmc(void *priv, bool set)
|
||
|
{
|
||
|
struct intel_pmc_dev *pmc = priv;
|
||
|
u32 bits = PMC_CFG_NO_REBOOT_EN;
|
||
|
u32 value = set ? bits : 0;
|
||
|
|
||
|
return intel_pmc_gcr_update(pmc, PMC_GCR_PMC_CFG_REG, bits, value);
|
||
|
}
|
||
|
|
||
|
static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
|
||
|
struct platform_device *pdev,
|
||
|
struct itco_wdt_platform_data *pdata)
|
||
|
{
|
||
|
if (pdata->no_reboot_use_pmc) {
|
||
|
struct intel_pmc_dev *pmc = dev_get_drvdata(pdev->dev.parent);
|
||
|
|
||
|
p->update_no_reboot_bit = update_no_reboot_bit_pmc;
|
||
|
p->no_reboot_priv = pmc;
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (p->iTCO_version >= 6)
|
||
|
p->update_no_reboot_bit = update_no_reboot_bit_cnt;
|
||
|
else if (p->iTCO_version >= 2)
|
||
|
p->update_no_reboot_bit = update_no_reboot_bit_mem;
|
||
|
else if (p->iTCO_version == 1)
|
||
|
p->update_no_reboot_bit = update_no_reboot_bit_pci;
|
||
|
else
|
||
|
p->update_no_reboot_bit = update_no_reboot_bit_def;
|
||
|
|
||
|
p->no_reboot_priv = p;
|
||
|
}
|
||
|
|
||
|
static int iTCO_wdt_start(struct watchdog_device *wd_dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
|
||
|
unsigned int val;
|
||
|
|
||
|
spin_lock(&p->io_lock);
|
||
|
|
||
|
iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout);
|
||
|
|
||
|
/* disable chipset's NO_REBOOT bit */
|
||
|
if (p->update_no_reboot_bit(p->no_reboot_priv, false)) {
|
||
|
spin_unlock(&p->io_lock);
|
||
|
dev_err(wd_dev->parent, "failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
/* Force the timer to its reload value by writing to the TCO_RLD
|
||
|
register */
|
||
|
if (p->iTCO_version >= 2)
|
||
|
outw(0x01, TCO_RLD(p));
|
||
|
else if (p->iTCO_version == 1)
|
||
|
outb(0x01, TCO_RLD(p));
|
||
|
|
||
|
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
val &= 0xf7ff;
|
||
|
outw(val, TCO1_CNT(p));
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
if (val & 0x0800)
|
||
|
return -1;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
|
||
|
unsigned int val;
|
||
|
|
||
|
spin_lock(&p->io_lock);
|
||
|
|
||
|
iTCO_vendor_pre_stop(p->smi_res);
|
||
|
|
||
|
/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
val |= 0x0800;
|
||
|
outw(val, TCO1_CNT(p));
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
|
||
|
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
|
||
|
p->update_no_reboot_bit(p->no_reboot_priv, true);
|
||
|
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
if ((val & 0x0800) == 0)
|
||
|
return -1;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
|
||
|
|
||
|
spin_lock(&p->io_lock);
|
||
|
|
||
|
/* Reload the timer by writing to the TCO Timer Counter register */
|
||
|
if (p->iTCO_version >= 2) {
|
||
|
outw(0x01, TCO_RLD(p));
|
||
|
} else if (p->iTCO_version == 1) {
|
||
|
/* Reset the timeout status bit so that the timer
|
||
|
* needs to count down twice again before rebooting */
|
||
|
outw(0x0008, TCO1_STS(p)); /* write 1 to clear bit */
|
||
|
|
||
|
outb(0x01, TCO_RLD(p));
|
||
|
}
|
||
|
|
||
|
spin_unlock(&p->io_lock);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
|
||
|
unsigned int val16;
|
||
|
unsigned char val8;
|
||
|
unsigned int tmrval;
|
||
|
|
||
|
tmrval = seconds_to_ticks(p, t);
|
||
|
|
||
|
/* For TCO v1 the timer counts down twice before rebooting */
|
||
|
if (p->iTCO_version == 1)
|
||
|
tmrval /= 2;
|
||
|
|
||
|
/* from the specs: */
|
||
|
/* "Values of 0h-3h are ignored and should not be attempted" */
|
||
|
if (tmrval < 0x04)
|
||
|
return -EINVAL;
|
||
|
if ((p->iTCO_version >= 2 && tmrval > 0x3ff) ||
|
||
|
(p->iTCO_version == 1 && tmrval > 0x03f))
|
||
|
return -EINVAL;
|
||
|
|
||
|
/* Write new heartbeat to watchdog */
|
||
|
if (p->iTCO_version >= 2) {
|
||
|
spin_lock(&p->io_lock);
|
||
|
val16 = inw(TCOv2_TMR(p));
|
||
|
val16 &= 0xfc00;
|
||
|
val16 |= tmrval;
|
||
|
outw(val16, TCOv2_TMR(p));
|
||
|
val16 = inw(TCOv2_TMR(p));
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
if ((val16 & 0x3ff) != tmrval)
|
||
|
return -EINVAL;
|
||
|
} else if (p->iTCO_version == 1) {
|
||
|
spin_lock(&p->io_lock);
|
||
|
val8 = inb(TCOv1_TMR(p));
|
||
|
val8 &= 0xc0;
|
||
|
val8 |= (tmrval & 0xff);
|
||
|
outb(val8, TCOv1_TMR(p));
|
||
|
val8 = inb(TCOv1_TMR(p));
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
if ((val8 & 0x3f) != tmrval)
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
wd_dev->timeout = t;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
|
||
|
unsigned int val16;
|
||
|
unsigned char val8;
|
||
|
unsigned int time_left = 0;
|
||
|
|
||
|
/* read the TCO Timer */
|
||
|
if (p->iTCO_version >= 2) {
|
||
|
spin_lock(&p->io_lock);
|
||
|
val16 = inw(TCO_RLD(p));
|
||
|
val16 &= 0x3ff;
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
time_left = ticks_to_seconds(p, val16);
|
||
|
} else if (p->iTCO_version == 1) {
|
||
|
spin_lock(&p->io_lock);
|
||
|
val8 = inb(TCO_RLD(p));
|
||
|
val8 &= 0x3f;
|
||
|
if (!(inw(TCO1_STS(p)) & 0x0008))
|
||
|
val8 += (inb(TCOv1_TMR(p)) & 0x3f);
|
||
|
spin_unlock(&p->io_lock);
|
||
|
|
||
|
time_left = ticks_to_seconds(p, val8);
|
||
|
}
|
||
|
return time_left;
|
||
|
}
|
||
|
|
||
|
/* Returns true if the watchdog was running */
|
||
|
static bool iTCO_wdt_set_running(struct iTCO_wdt_private *p)
|
||
|
{
|
||
|
u16 val;
|
||
|
|
||
|
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled */
|
||
|
val = inw(TCO1_CNT(p));
|
||
|
if (!(val & BIT(11))) {
|
||
|
set_bit(WDOG_HW_RUNNING, &p->wddev.status);
|
||
|
return true;
|
||
|
}
|
||
|
return false;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Kernel Interfaces
|
||
|
*/
|
||
|
|
||
|
static const struct watchdog_info ident = {
|
||
|
.options = WDIOF_SETTIMEOUT |
|
||
|
WDIOF_KEEPALIVEPING |
|
||
|
WDIOF_MAGICCLOSE,
|
||
|
.firmware_version = 0,
|
||
|
.identity = DRV_NAME,
|
||
|
};
|
||
|
|
||
|
static const struct watchdog_ops iTCO_wdt_ops = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.start = iTCO_wdt_start,
|
||
|
.stop = iTCO_wdt_stop,
|
||
|
.ping = iTCO_wdt_ping,
|
||
|
.set_timeout = iTCO_wdt_set_timeout,
|
||
|
.get_timeleft = iTCO_wdt_get_timeleft,
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* Init & exit routines
|
||
|
*/
|
||
|
|
||
|
static int iTCO_wdt_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
struct device *dev = &pdev->dev;
|
||
|
struct itco_wdt_platform_data *pdata = dev_get_platdata(dev);
|
||
|
struct iTCO_wdt_private *p;
|
||
|
unsigned long val32;
|
||
|
int ret;
|
||
|
|
||
|
if (!pdata)
|
||
|
return -ENODEV;
|
||
|
|
||
|
p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
|
||
|
if (!p)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
spin_lock_init(&p->io_lock);
|
||
|
|
||
|
p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO);
|
||
|
if (!p->tco_res)
|
||
|
return -ENODEV;
|
||
|
|
||
|
p->iTCO_version = pdata->version;
|
||
|
p->pci_dev = to_pci_dev(dev->parent);
|
||
|
|
||
|
p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI);
|
||
|
if (p->smi_res) {
|
||
|
/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
|
||
|
if (!devm_request_region(dev, p->smi_res->start,
|
||
|
resource_size(p->smi_res),
|
||
|
pdev->name)) {
|
||
|
dev_err(dev, "I/O address 0x%04llx already in use, device disabled\n",
|
||
|
(u64)SMI_EN(p));
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
} else if (iTCO_vendorsupport ||
|
||
|
turn_SMI_watchdog_clear_off >= p->iTCO_version) {
|
||
|
dev_err(dev, "SMI I/O resource is missing\n");
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
iTCO_wdt_no_reboot_bit_setup(p, pdev, pdata);
|
||
|
|
||
|
/*
|
||
|
* Get the Memory-Mapped GCS or PMC register, we need it for the
|
||
|
* NO_REBOOT flag (TCO v2 and v3).
|
||
|
*/
|
||
|
if (p->iTCO_version >= 2 && p->iTCO_version < 6 &&
|
||
|
!pdata->no_reboot_use_pmc) {
|
||
|
p->gcs_pmc = devm_platform_ioremap_resource(pdev, ICH_RES_MEM_GCS_PMC);
|
||
|
if (IS_ERR(p->gcs_pmc))
|
||
|
return PTR_ERR(p->gcs_pmc);
|
||
|
}
|
||
|
|
||
|
/* Check chipset's NO_REBOOT bit */
|
||
|
if (p->update_no_reboot_bit(p->no_reboot_priv, false) &&
|
||
|
iTCO_vendor_check_noreboot_on()) {
|
||
|
dev_info(dev, "unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
|
||
|
return -ENODEV; /* Cannot reset NO_REBOOT bit */
|
||
|
}
|
||
|
|
||
|
if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
|
||
|
/*
|
||
|
* Bit 13: TCO_EN -> 0
|
||
|
* Disables TCO logic generating an SMI#
|
||
|
*/
|
||
|
val32 = inl(SMI_EN(p));
|
||
|
val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
|
||
|
outl(val32, SMI_EN(p));
|
||
|
}
|
||
|
|
||
|
if (!devm_request_region(dev, p->tco_res->start,
|
||
|
resource_size(p->tco_res),
|
||
|
pdev->name)) {
|
||
|
dev_err(dev, "I/O address 0x%04llx already in use, device disabled\n",
|
||
|
(u64)TCOBASE(p));
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
|
||
|
dev_info(dev, "Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
|
||
|
pdata->name, pdata->version, (u64)TCOBASE(p));
|
||
|
|
||
|
/* Clear out the (probably old) status */
|
||
|
switch (p->iTCO_version) {
|
||
|
case 6:
|
||
|
case 5:
|
||
|
case 4:
|
||
|
outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
|
||
|
outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
|
||
|
break;
|
||
|
case 3:
|
||
|
outl(0x20008, TCO1_STS(p));
|
||
|
break;
|
||
|
case 2:
|
||
|
case 1:
|
||
|
default:
|
||
|
outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
|
||
|
outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
|
||
|
outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
p->wddev.info = &ident,
|
||
|
p->wddev.ops = &iTCO_wdt_ops,
|
||
|
p->wddev.bootstatus = 0;
|
||
|
p->wddev.timeout = WATCHDOG_TIMEOUT;
|
||
|
watchdog_set_nowayout(&p->wddev, nowayout);
|
||
|
p->wddev.parent = dev;
|
||
|
|
||
|
watchdog_set_drvdata(&p->wddev, p);
|
||
|
platform_set_drvdata(pdev, p);
|
||
|
|
||
|
if (!iTCO_wdt_set_running(p)) {
|
||
|
/*
|
||
|
* If the watchdog was not running set NO_REBOOT now to
|
||
|
* prevent later reboots.
|
||
|
*/
|
||
|
p->update_no_reboot_bit(p->no_reboot_priv, true);
|
||
|
}
|
||
|
|
||
|
/* Check that the heartbeat value is within it's range;
|
||
|
if not reset to the default */
|
||
|
if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) {
|
||
|
iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT);
|
||
|
dev_info(dev, "timeout value out of range, using %d\n",
|
||
|
WATCHDOG_TIMEOUT);
|
||
|
}
|
||
|
|
||
|
watchdog_stop_on_reboot(&p->wddev);
|
||
|
watchdog_stop_on_unregister(&p->wddev);
|
||
|
ret = devm_watchdog_register_device(dev, &p->wddev);
|
||
|
if (ret != 0) {
|
||
|
dev_err(dev, "cannot register watchdog device (err=%d)\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
dev_info(dev, "initialized. heartbeat=%d sec (nowayout=%d)\n",
|
||
|
heartbeat, nowayout);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Suspend-to-idle requires this, because it stops the ticks and timekeeping, so
|
||
|
* the watchdog cannot be pinged while in that state. In ACPI sleep states the
|
||
|
* watchdog is stopped by the platform firmware.
|
||
|
*/
|
||
|
|
||
|
#ifdef CONFIG_ACPI
|
||
|
static inline bool __maybe_unused need_suspend(void)
|
||
|
{
|
||
|
return acpi_target_system_state() == ACPI_STATE_S0;
|
||
|
}
|
||
|
#else
|
||
|
static inline bool __maybe_unused need_suspend(void) { return true; }
|
||
|
#endif
|
||
|
|
||
|
static int __maybe_unused iTCO_wdt_suspend_noirq(struct device *dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = dev_get_drvdata(dev);
|
||
|
int ret = 0;
|
||
|
|
||
|
p->suspended = false;
|
||
|
if (watchdog_active(&p->wddev) && need_suspend()) {
|
||
|
ret = iTCO_wdt_stop(&p->wddev);
|
||
|
if (!ret)
|
||
|
p->suspended = true;
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused iTCO_wdt_resume_noirq(struct device *dev)
|
||
|
{
|
||
|
struct iTCO_wdt_private *p = dev_get_drvdata(dev);
|
||
|
|
||
|
if (p->suspended)
|
||
|
iTCO_wdt_start(&p->wddev);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops iTCO_wdt_pm = {
|
||
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(iTCO_wdt_suspend_noirq,
|
||
|
iTCO_wdt_resume_noirq)
|
||
|
};
|
||
|
|
||
|
static struct platform_driver iTCO_wdt_driver = {
|
||
|
.probe = iTCO_wdt_probe,
|
||
|
.driver = {
|
||
|
.name = DRV_NAME,
|
||
|
.pm = &iTCO_wdt_pm,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_platform_driver(iTCO_wdt_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
|
||
|
MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
|
||
|
MODULE_VERSION(DRV_VERSION);
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_ALIAS("platform:" DRV_NAME);
|