linuxdebug/drivers/rtc/rtc-au1xxx.c

119 lines
2.9 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Au1xxx counter0 (aka Time-Of-Year counter) RTC interface driver.
*
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
*/
/* All current Au1xxx SoCs have 2 counters fed by an external 32.768 kHz
* crystal. Counter 0, which keeps counting during sleep/powerdown, is
* used to count seconds since the beginning of the unix epoch.
*
* The counters must be configured and enabled by bootloader/board code;
* no checks as to whether they really get a proper 32.768kHz clock are
* made as this would take far too long.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/rtc.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach-au1x00/au1000.h>
/* 32kHz clock enabled and detected */
#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
static int au1xtoy_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
unsigned long t;
t = alchemy_rdsys(AU1000_SYS_TOYREAD);
rtc_time64_to_tm(t, tm);
return 0;
}
static int au1xtoy_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
unsigned long t;
t = rtc_tm_to_time64(tm);
alchemy_wrsys(t, AU1000_SYS_TOYWRITE);
/* wait for the pending register write to succeed. This can
* take up to 6 seconds...
*/
while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
msleep(1);
return 0;
}
static const struct rtc_class_ops au1xtoy_rtc_ops = {
.read_time = au1xtoy_rtc_read_time,
.set_time = au1xtoy_rtc_set_time,
};
static int au1xtoy_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtcdev;
unsigned long t;
t = alchemy_rdsys(AU1000_SYS_CNTRCTRL);
if (!(t & CNTR_OK)) {
dev_err(&pdev->dev, "counters not working; aborting.\n");
return -ENODEV;
}
/* set counter0 tickrate to 1Hz if necessary */
if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) {
/* wait until hardware gives access to TRIM register */
t = 0x00100000;
while ((alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_T0S) && --t)
msleep(1);
if (!t) {
/* timed out waiting for register access; assume
* counters are unusable.
*/
dev_err(&pdev->dev, "timeout waiting for access\n");
return -ETIMEDOUT;
}
/* set 1Hz TOY tick rate */
alchemy_wrsys(32767, AU1000_SYS_TOYTRIM);
}
/* wait until the hardware allows writes to the counter reg */
while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_C0S)
msleep(1);
rtcdev = devm_rtc_allocate_device(&pdev->dev);
if (IS_ERR(rtcdev))
return PTR_ERR(rtcdev);
rtcdev->ops = &au1xtoy_rtc_ops;
rtcdev->range_max = U32_MAX;
platform_set_drvdata(pdev, rtcdev);
return devm_rtc_register_device(rtcdev);
}
static struct platform_driver au1xrtc_driver = {
.driver = {
.name = "rtc-au1xxx",
},
};
module_platform_driver_probe(au1xrtc_driver, au1xtoy_rtc_probe);
MODULE_DESCRIPTION("Au1xxx TOY-counter-based RTC driver");
MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:rtc-au1xxx");