linuxdebug/drivers/net/wireless/silabs/wfx/main.c

498 lines
15 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device probe and register.
*
* Copyright (c) 2017-2020, Silicon Laboratories, Inc.
* Copyright (c) 2010, ST-Ericsson
* Copyright (c) 2008, Johannes Berg <johannes@sipsolutions.net>
* Copyright (c) 2008 Nokia Corporation and/or its subsidiary(-ies).
* Copyright (c) 2007-2009, Christian Lamparter <chunkeey@web.de>
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
*/
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_net.h>
#include <linux/gpio/consumer.h>
#include <linux/mmc/sdio_func.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include <linux/firmware.h>
#include "main.h"
#include "wfx.h"
#include "fwio.h"
#include "hwio.h"
#include "bus.h"
#include "bh.h"
#include "sta.h"
#include "key.h"
#include "scan.h"
#include "debug.h"
#include "data_tx.h"
#include "hif_tx_mib.h"
#include "hif_api_cmd.h"
#define WFX_PDS_TLV_TYPE 0x4450 // "PD" (Platform Data) in ascii little-endian
#define WFX_PDS_MAX_CHUNK_SIZE 1500
MODULE_DESCRIPTION("Silicon Labs 802.11 Wireless LAN driver for WF200");
MODULE_AUTHOR("Jérôme Pouiller <jerome.pouiller@silabs.com>");
MODULE_LICENSE("GPL");
#define RATETAB_ENT(_rate, _rateid, _flags) { \
.bitrate = (_rate), \
.hw_value = (_rateid), \
.flags = (_flags), \
}
static struct ieee80211_rate wfx_rates[] = {
RATETAB_ENT(10, 0, 0),
RATETAB_ENT(20, 1, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(55, 2, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(110, 3, IEEE80211_RATE_SHORT_PREAMBLE),
RATETAB_ENT(60, 6, 0),
RATETAB_ENT(90, 7, 0),
RATETAB_ENT(120, 8, 0),
RATETAB_ENT(180, 9, 0),
RATETAB_ENT(240, 10, 0),
RATETAB_ENT(360, 11, 0),
RATETAB_ENT(480, 12, 0),
RATETAB_ENT(540, 13, 0),
};
#define CHAN2G(_channel, _freq, _flags) { \
.band = NL80211_BAND_2GHZ, \
.center_freq = (_freq), \
.hw_value = (_channel), \
.flags = (_flags), \
.max_antenna_gain = 0, \
.max_power = 30, \
}
static struct ieee80211_channel wfx_2ghz_chantable[] = {
CHAN2G(1, 2412, 0),
CHAN2G(2, 2417, 0),
CHAN2G(3, 2422, 0),
CHAN2G(4, 2427, 0),
CHAN2G(5, 2432, 0),
CHAN2G(6, 2437, 0),
CHAN2G(7, 2442, 0),
CHAN2G(8, 2447, 0),
CHAN2G(9, 2452, 0),
CHAN2G(10, 2457, 0),
CHAN2G(11, 2462, 0),
CHAN2G(12, 2467, 0),
CHAN2G(13, 2472, 0),
CHAN2G(14, 2484, 0),
};
static const struct ieee80211_supported_band wfx_band_2ghz = {
.channels = wfx_2ghz_chantable,
.n_channels = ARRAY_SIZE(wfx_2ghz_chantable),
.bitrates = wfx_rates,
.n_bitrates = ARRAY_SIZE(wfx_rates),
.ht_cap = {
/* Receive caps */
.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_MAX_AMSDU | (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT),
.ht_supported = 1,
.ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_NONE,
.mcs = {
.rx_mask = { 0xFF }, /* MCS0 to MCS7 */
.rx_highest = cpu_to_le16(72),
.tx_params = IEEE80211_HT_MCS_TX_DEFINED,
},
},
};
static const struct ieee80211_iface_limit wdev_iface_limits[] = {
{ .max = 1, .types = BIT(NL80211_IFTYPE_STATION) },
{ .max = 1, .types = BIT(NL80211_IFTYPE_AP) },
};
static const struct ieee80211_iface_combination wfx_iface_combinations[] = {
{
.num_different_channels = 2,
.max_interfaces = 2,
.limits = wdev_iface_limits,
.n_limits = ARRAY_SIZE(wdev_iface_limits),
}
};
static const struct ieee80211_ops wfx_ops = {
.start = wfx_start,
.stop = wfx_stop,
.add_interface = wfx_add_interface,
.remove_interface = wfx_remove_interface,
.config = wfx_config,
.tx = wfx_tx,
.join_ibss = wfx_join_ibss,
.leave_ibss = wfx_leave_ibss,
.conf_tx = wfx_conf_tx,
.hw_scan = wfx_hw_scan,
.cancel_hw_scan = wfx_cancel_hw_scan,
.start_ap = wfx_start_ap,
.stop_ap = wfx_stop_ap,
.sta_add = wfx_sta_add,
.sta_remove = wfx_sta_remove,
.set_tim = wfx_set_tim,
.set_key = wfx_set_key,
.set_rts_threshold = wfx_set_rts_threshold,
.set_default_unicast_key = wfx_set_default_unicast_key,
.bss_info_changed = wfx_bss_info_changed,
.configure_filter = wfx_configure_filter,
.ampdu_action = wfx_ampdu_action,
.flush = wfx_flush,
.add_chanctx = wfx_add_chanctx,
.remove_chanctx = wfx_remove_chanctx,
.change_chanctx = wfx_change_chanctx,
.assign_vif_chanctx = wfx_assign_vif_chanctx,
.unassign_vif_chanctx = wfx_unassign_vif_chanctx,
};
bool wfx_api_older_than(struct wfx_dev *wdev, int major, int minor)
{
if (wdev->hw_caps.api_version_major < major)
return true;
if (wdev->hw_caps.api_version_major > major)
return false;
if (wdev->hw_caps.api_version_minor < minor)
return true;
return false;
}
/* The device needs data about the antenna configuration. This information in provided by PDS
* (Platform Data Set, this is the wording used in WF200 documentation) files. For hardware
* integrators, the full process to create PDS files is described here:
* https://github.com/SiliconLabs/wfx-firmware/blob/master/PDS/README.md
*
* The PDS file is an array of Time-Length-Value structs.
*/
int wfx_send_pds(struct wfx_dev *wdev, u8 *buf, size_t len)
{
int ret, chunk_type, chunk_len, chunk_num = 0;
if (*buf == '{') {
dev_err(wdev->dev, "PDS: malformed file (legacy format?)\n");
return -EINVAL;
}
while (len > 0) {
chunk_type = get_unaligned_le16(buf + 0);
chunk_len = get_unaligned_le16(buf + 2);
if (chunk_len < 4 || chunk_len > len) {
dev_err(wdev->dev, "PDS:%d: corrupted file\n", chunk_num);
return -EINVAL;
}
if (chunk_type != WFX_PDS_TLV_TYPE) {
dev_info(wdev->dev, "PDS:%d: skip unknown data\n", chunk_num);
goto next;
}
if (chunk_len > WFX_PDS_MAX_CHUNK_SIZE)
dev_warn(wdev->dev, "PDS:%d: unexpectedly large chunk\n", chunk_num);
if (buf[4] != '{' || buf[chunk_len - 1] != '}')
dev_warn(wdev->dev, "PDS:%d: unexpected content\n", chunk_num);
ret = wfx_hif_configuration(wdev, buf + 4, chunk_len - 4);
if (ret > 0) {
dev_err(wdev->dev, "PDS:%d: invalid data (unsupported options?)\n", chunk_num);
return -EINVAL;
}
if (ret == -ETIMEDOUT) {
dev_err(wdev->dev, "PDS:%d: chip didn't reply (corrupted file?)\n", chunk_num);
return ret;
}
if (ret) {
dev_err(wdev->dev, "PDS:%d: chip returned an unknown error\n", chunk_num);
return -EIO;
}
next:
chunk_num++;
len -= chunk_len;
buf += chunk_len;
}
return 0;
}
static int wfx_send_pdata_pds(struct wfx_dev *wdev)
{
int ret = 0;
const struct firmware *pds;
u8 *tmp_buf;
ret = request_firmware(&pds, wdev->pdata.file_pds, wdev->dev);
if (ret) {
dev_err(wdev->dev, "can't load antenna parameters (PDS file %s). The device may be unstable.\n",
wdev->pdata.file_pds);
return ret;
}
tmp_buf = kmemdup(pds->data, pds->size, GFP_KERNEL);
if (!tmp_buf) {
ret = -ENOMEM;
goto release_fw;
}
ret = wfx_send_pds(wdev, tmp_buf, pds->size);
kfree(tmp_buf);
release_fw:
release_firmware(pds);
return ret;
}
static void wfx_free_common(void *data)
{
struct wfx_dev *wdev = data;
mutex_destroy(&wdev->tx_power_loop_info_lock);
mutex_destroy(&wdev->rx_stats_lock);
mutex_destroy(&wdev->conf_mutex);
ieee80211_free_hw(wdev->hw);
}
struct wfx_dev *wfx_init_common(struct device *dev, const struct wfx_platform_data *pdata,
const struct wfx_hwbus_ops *hwbus_ops, void *hwbus_priv)
{
struct ieee80211_hw *hw;
struct wfx_dev *wdev;
hw = ieee80211_alloc_hw(sizeof(struct wfx_dev), &wfx_ops);
if (!hw)
return NULL;
SET_IEEE80211_DEV(hw, dev);
ieee80211_hw_set(hw, TX_AMPDU_SETUP_IN_HW);
ieee80211_hw_set(hw, AMPDU_AGGREGATION);
ieee80211_hw_set(hw, CONNECTION_MONITOR);
ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
ieee80211_hw_set(hw, SIGNAL_DBM);
ieee80211_hw_set(hw, SUPPORTS_PS);
ieee80211_hw_set(hw, MFP_CAPABLE);
hw->vif_data_size = sizeof(struct wfx_vif);
hw->sta_data_size = sizeof(struct wfx_sta_priv);
hw->queues = 4;
hw->max_rates = 8;
hw->max_rate_tries = 8;
hw->extra_tx_headroom = sizeof(struct wfx_hif_msg) + sizeof(struct wfx_hif_req_tx) +
4 /* alignment */ + 8 /* TKIP IV */;
hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP);
hw->wiphy->probe_resp_offload = NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P |
NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U;
hw->wiphy->features |= NL80211_FEATURE_AP_SCAN;
hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
hw->wiphy->max_ap_assoc_sta = HIF_LINK_ID_MAX;
hw->wiphy->max_scan_ssids = 2;
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
hw->wiphy->n_iface_combinations = ARRAY_SIZE(wfx_iface_combinations);
hw->wiphy->iface_combinations = wfx_iface_combinations;
hw->wiphy->bands[NL80211_BAND_2GHZ] = devm_kmalloc(dev, sizeof(wfx_band_2ghz), GFP_KERNEL);
if (!hw->wiphy->bands[NL80211_BAND_2GHZ])
goto err;
/* FIXME: also copy wfx_rates and wfx_2ghz_chantable */
memcpy(hw->wiphy->bands[NL80211_BAND_2GHZ], &wfx_band_2ghz, sizeof(wfx_band_2ghz));
wdev = hw->priv;
wdev->hw = hw;
wdev->dev = dev;
wdev->hwbus_ops = hwbus_ops;
wdev->hwbus_priv = hwbus_priv;
memcpy(&wdev->pdata, pdata, sizeof(*pdata));
of_property_read_string(dev->of_node, "silabs,antenna-config-file", &wdev->pdata.file_pds);
wdev->pdata.gpio_wakeup = devm_gpiod_get_optional(dev, "wakeup", GPIOD_OUT_LOW);
if (IS_ERR(wdev->pdata.gpio_wakeup))
goto err;
if (wdev->pdata.gpio_wakeup)
gpiod_set_consumer_name(wdev->pdata.gpio_wakeup, "wfx wakeup");
mutex_init(&wdev->conf_mutex);
mutex_init(&wdev->rx_stats_lock);
mutex_init(&wdev->tx_power_loop_info_lock);
init_completion(&wdev->firmware_ready);
INIT_DELAYED_WORK(&wdev->cooling_timeout_work, wfx_cooling_timeout_work);
skb_queue_head_init(&wdev->tx_pending);
init_waitqueue_head(&wdev->tx_dequeue);
wfx_init_hif_cmd(&wdev->hif_cmd);
if (devm_add_action_or_reset(dev, wfx_free_common, wdev))
return NULL;
return wdev;
err:
ieee80211_free_hw(hw);
return NULL;
}
int wfx_probe(struct wfx_dev *wdev)
{
int i;
int err;
struct gpio_desc *gpio_saved;
/* During first part of boot, gpio_wakeup cannot yet been used. So prevent bh() to touch
* it.
*/
gpio_saved = wdev->pdata.gpio_wakeup;
wdev->pdata.gpio_wakeup = NULL;
wdev->poll_irq = true;
wdev->bh_wq = alloc_workqueue("wfx_bh_wq", WQ_HIGHPRI, 0);
if (!wdev->bh_wq)
return -ENOMEM;
wfx_bh_register(wdev);
err = wfx_init_device(wdev);
if (err)
goto bh_unregister;
wfx_bh_poll_irq(wdev);
err = wait_for_completion_timeout(&wdev->firmware_ready, 1 * HZ);
if (err <= 0) {
if (err == 0) {
dev_err(wdev->dev, "timeout while waiting for startup indication\n");
err = -ETIMEDOUT;
} else if (err == -ERESTARTSYS) {
dev_info(wdev->dev, "probe interrupted by user\n");
}
goto bh_unregister;
}
/* FIXME: fill wiphy::hw_version */
dev_info(wdev->dev, "started firmware %d.%d.%d \"%s\" (API: %d.%d, keyset: %02X, caps: 0x%.8X)\n",
wdev->hw_caps.firmware_major, wdev->hw_caps.firmware_minor,
wdev->hw_caps.firmware_build, wdev->hw_caps.firmware_label,
wdev->hw_caps.api_version_major, wdev->hw_caps.api_version_minor,
wdev->keyset, wdev->hw_caps.link_mode);
snprintf(wdev->hw->wiphy->fw_version,
sizeof(wdev->hw->wiphy->fw_version),
"%d.%d.%d",
wdev->hw_caps.firmware_major,
wdev->hw_caps.firmware_minor,
wdev->hw_caps.firmware_build);
if (wfx_api_older_than(wdev, 1, 0)) {
dev_err(wdev->dev, "unsupported firmware API version (expect 1 while firmware returns %d)\n",
wdev->hw_caps.api_version_major);
err = -EOPNOTSUPP;
goto bh_unregister;
}
if (wdev->hw_caps.link_mode == SEC_LINK_ENFORCED) {
dev_err(wdev->dev, "chip require secure_link, but can't negotiate it\n");
goto bh_unregister;
}
if (wdev->hw_caps.region_sel_mode) {
wdev->hw->wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS;
wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[11].flags |=
IEEE80211_CHAN_NO_IR;
wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[12].flags |=
IEEE80211_CHAN_NO_IR;
wdev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels[13].flags |=
IEEE80211_CHAN_DISABLED;
}
dev_dbg(wdev->dev, "sending configuration file %s\n", wdev->pdata.file_pds);
err = wfx_send_pdata_pds(wdev);
if (err < 0 && err != -ENOENT)
goto bh_unregister;
wdev->poll_irq = false;
err = wdev->hwbus_ops->irq_subscribe(wdev->hwbus_priv);
if (err)
goto bh_unregister;
err = wfx_hif_use_multi_tx_conf(wdev, true);
if (err)
dev_err(wdev->dev, "misconfigured IRQ?\n");
wdev->pdata.gpio_wakeup = gpio_saved;
if (wdev->pdata.gpio_wakeup) {
dev_dbg(wdev->dev, "enable 'quiescent' power mode with wakeup GPIO and PDS file %s\n",
wdev->pdata.file_pds);
gpiod_set_value_cansleep(wdev->pdata.gpio_wakeup, 1);
wfx_control_reg_write(wdev, 0);
wfx_hif_set_operational_mode(wdev, HIF_OP_POWER_MODE_QUIESCENT);
} else {
wfx_hif_set_operational_mode(wdev, HIF_OP_POWER_MODE_DOZE);
}
for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) {
eth_zero_addr(wdev->addresses[i].addr);
err = of_get_mac_address(wdev->dev->of_node, wdev->addresses[i].addr);
if (!err)
wdev->addresses[i].addr[ETH_ALEN - 1] += i;
else
ether_addr_copy(wdev->addresses[i].addr, wdev->hw_caps.mac_addr[i]);
if (!is_valid_ether_addr(wdev->addresses[i].addr)) {
dev_warn(wdev->dev, "using random MAC address\n");
eth_random_addr(wdev->addresses[i].addr);
}
dev_info(wdev->dev, "MAC address %d: %pM\n", i, wdev->addresses[i].addr);
}
wdev->hw->wiphy->n_addresses = ARRAY_SIZE(wdev->addresses);
wdev->hw->wiphy->addresses = wdev->addresses;
if (!wfx_api_older_than(wdev, 3, 8))
wdev->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS;
err = ieee80211_register_hw(wdev->hw);
if (err)
goto irq_unsubscribe;
err = wfx_debug_init(wdev);
if (err)
goto ieee80211_unregister;
return 0;
ieee80211_unregister:
ieee80211_unregister_hw(wdev->hw);
irq_unsubscribe:
wdev->hwbus_ops->irq_unsubscribe(wdev->hwbus_priv);
bh_unregister:
wfx_bh_unregister(wdev);
destroy_workqueue(wdev->bh_wq);
return err;
}
void wfx_release(struct wfx_dev *wdev)
{
ieee80211_unregister_hw(wdev->hw);
wfx_hif_shutdown(wdev);
wdev->hwbus_ops->irq_unsubscribe(wdev->hwbus_priv);
wfx_bh_unregister(wdev);
destroy_workqueue(wdev->bh_wq);
}
static int __init wfx_core_init(void)
{
int ret = 0;
if (IS_ENABLED(CONFIG_SPI))
ret = spi_register_driver(&wfx_spi_driver);
if (IS_ENABLED(CONFIG_MMC) && !ret)
ret = sdio_register_driver(&wfx_sdio_driver);
return ret;
}
module_init(wfx_core_init);
static void __exit wfx_core_exit(void)
{
if (IS_ENABLED(CONFIG_MMC))
sdio_unregister_driver(&wfx_sdio_driver);
if (IS_ENABLED(CONFIG_SPI))
spi_unregister_driver(&wfx_spi_driver);
}
module_exit(wfx_core_exit);