linuxdebug/arch/riscv/include/asm/uaccess.h

342 lines
9.6 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2012 Regents of the University of California
*
* This file was copied from include/asm-generic/uaccess.h
*/
#ifndef _ASM_RISCV_UACCESS_H
#define _ASM_RISCV_UACCESS_H
#include <asm/asm-extable.h>
#include <asm/pgtable.h> /* for TASK_SIZE */
/*
* User space memory access functions
*/
#ifdef CONFIG_MMU
#include <linux/errno.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/byteorder.h>
#include <asm/extable.h>
#include <asm/asm.h>
#include <asm-generic/access_ok.h>
#define __enable_user_access() \
__asm__ __volatile__ ("csrs sstatus, %0" : : "r" (SR_SUM) : "memory")
#define __disable_user_access() \
__asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory")
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
#define __LSW 0
#define __MSW 1
/*
* The "__xxx" versions of the user access functions do not verify the address
* space - it must have been done previously with a separate "access_ok()"
* call.
*/
#define __get_user_asm(insn, x, ptr, err) \
do { \
__typeof__(x) __x; \
__asm__ __volatile__ ( \
"1:\n" \
" " insn " %1, %2\n" \
"2:\n" \
_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 2b, %0, %1) \
: "+r" (err), "=&r" (__x) \
: "m" (*(ptr))); \
(x) = __x; \
} while (0)
#ifdef CONFIG_64BIT
#define __get_user_8(x, ptr, err) \
__get_user_asm("ld", x, ptr, err)
#else /* !CONFIG_64BIT */
#define __get_user_8(x, ptr, err) \
do { \
u32 __user *__ptr = (u32 __user *)(ptr); \
u32 __lo, __hi; \
__asm__ __volatile__ ( \
"1:\n" \
" lw %1, %3\n" \
"2:\n" \
" lw %2, %4\n" \
"3:\n" \
_ASM_EXTABLE_UACCESS_ERR_ZERO(1b, 3b, %0, %1) \
_ASM_EXTABLE_UACCESS_ERR_ZERO(2b, 3b, %0, %1) \
: "+r" (err), "=&r" (__lo), "=r" (__hi) \
: "m" (__ptr[__LSW]), "m" (__ptr[__MSW])); \
if (err) \
__hi = 0; \
(x) = (__typeof__(x))((__typeof__((x)-(x)))( \
(((u64)__hi << 32) | __lo))); \
} while (0)
#endif /* CONFIG_64BIT */
#define __get_user_nocheck(x, __gu_ptr, __gu_err) \
do { \
switch (sizeof(*__gu_ptr)) { \
case 1: \
__get_user_asm("lb", (x), __gu_ptr, __gu_err); \
break; \
case 2: \
__get_user_asm("lh", (x), __gu_ptr, __gu_err); \
break; \
case 4: \
__get_user_asm("lw", (x), __gu_ptr, __gu_err); \
break; \
case 8: \
__get_user_8((x), __gu_ptr, __gu_err); \
break; \
default: \
BUILD_BUG(); \
} \
} while (0)
/**
* __get_user: - Get a simple variable from user space, with less checking.
* @x: Variable to store result.
* @ptr: Source address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple variable from user space to kernel
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and the result of
* dereferencing @ptr must be assignable to @x without a cast.
*
* Caller must check the pointer with access_ok() before calling this
* function.
*
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
#define __get_user(x, ptr) \
({ \
const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
long __gu_err = 0; \
\
__chk_user_ptr(__gu_ptr); \
\
__enable_user_access(); \
__get_user_nocheck(x, __gu_ptr, __gu_err); \
__disable_user_access(); \
\
__gu_err; \
})
/**
* get_user: - Get a simple variable from user space.
* @x: Variable to store result.
* @ptr: Source address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple variable from user space to kernel
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and the result of
* dereferencing @ptr must be assignable to @x without a cast.
*
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
#define get_user(x, ptr) \
({ \
const __typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(__p, sizeof(*__p)) ? \
__get_user((x), __p) : \
((x) = (__force __typeof__(x))0, -EFAULT); \
})
#define __put_user_asm(insn, x, ptr, err) \
do { \
__typeof__(*(ptr)) __x = x; \
__asm__ __volatile__ ( \
"1:\n" \
" " insn " %z2, %1\n" \
"2:\n" \
_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %0) \
: "+r" (err), "=m" (*(ptr)) \
: "rJ" (__x)); \
} while (0)
#ifdef CONFIG_64BIT
#define __put_user_8(x, ptr, err) \
__put_user_asm("sd", x, ptr, err)
#else /* !CONFIG_64BIT */
#define __put_user_8(x, ptr, err) \
do { \
u32 __user *__ptr = (u32 __user *)(ptr); \
u64 __x = (__typeof__((x)-(x)))(x); \
__asm__ __volatile__ ( \
"1:\n" \
" sw %z3, %1\n" \
"2:\n" \
" sw %z4, %2\n" \
"3:\n" \
_ASM_EXTABLE_UACCESS_ERR(1b, 3b, %0) \
_ASM_EXTABLE_UACCESS_ERR(2b, 3b, %0) \
: "+r" (err), \
"=m" (__ptr[__LSW]), \
"=m" (__ptr[__MSW]) \
: "rJ" (__x), "rJ" (__x >> 32)); \
} while (0)
#endif /* CONFIG_64BIT */
#define __put_user_nocheck(x, __gu_ptr, __pu_err) \
do { \
switch (sizeof(*__gu_ptr)) { \
case 1: \
__put_user_asm("sb", (x), __gu_ptr, __pu_err); \
break; \
case 2: \
__put_user_asm("sh", (x), __gu_ptr, __pu_err); \
break; \
case 4: \
__put_user_asm("sw", (x), __gu_ptr, __pu_err); \
break; \
case 8: \
__put_user_8((x), __gu_ptr, __pu_err); \
break; \
default: \
BUILD_BUG(); \
} \
} while (0)
/**
* __put_user: - Write a simple value into user space, with less checking.
* @x: Value to copy to user space.
* @ptr: Destination address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple value from kernel space to user
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and @x must be assignable
* to the result of dereferencing @ptr. The value of @x is copied to avoid
* re-ordering where @x is evaluated inside the block that enables user-space
* access (thus bypassing user space protection if @x is a function).
*
* Caller must check the pointer with access_ok() before calling this
* function.
*
* Returns zero on success, or -EFAULT on error.
*/
#define __put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
__typeof__(*__gu_ptr) __val = (x); \
long __pu_err = 0; \
\
__chk_user_ptr(__gu_ptr); \
\
__enable_user_access(); \
__put_user_nocheck(__val, __gu_ptr, __pu_err); \
__disable_user_access(); \
\
__pu_err; \
})
/**
* put_user: - Write a simple value into user space.
* @x: Value to copy to user space.
* @ptr: Destination address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple value from kernel space to user
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and @x must be assignable
* to the result of dereferencing @ptr.
*
* Returns zero on success, or -EFAULT on error.
*/
#define put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __user *__p = (ptr); \
might_fault(); \
access_ok(__p, sizeof(*__p)) ? \
__put_user((x), __p) : \
-EFAULT; \
})
unsigned long __must_check __asm_copy_to_user(void __user *to,
const void *from, unsigned long n);
unsigned long __must_check __asm_copy_from_user(void *to,
const void __user *from, unsigned long n);
static inline unsigned long
raw_copy_from_user(void *to, const void __user *from, unsigned long n)
{
return __asm_copy_from_user(to, from, n);
}
static inline unsigned long
raw_copy_to_user(void __user *to, const void *from, unsigned long n)
{
return __asm_copy_to_user(to, from, n);
}
extern long strncpy_from_user(char *dest, const char __user *src, long count);
extern long __must_check strnlen_user(const char __user *str, long n);
extern
unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
static inline
unsigned long __must_check clear_user(void __user *to, unsigned long n)
{
might_fault();
return access_ok(to, n) ?
__clear_user(to, n) : n;
}
#define __get_kernel_nofault(dst, src, type, err_label) \
do { \
long __kr_err; \
\
__get_user_nocheck(*((type *)(dst)), (type *)(src), __kr_err); \
if (unlikely(__kr_err)) \
goto err_label; \
} while (0)
#define __put_kernel_nofault(dst, src, type, err_label) \
do { \
long __kr_err; \
\
__put_user_nocheck(*((type *)(src)), (type *)(dst), __kr_err); \
if (unlikely(__kr_err)) \
goto err_label; \
} while (0)
#else /* CONFIG_MMU */
#include <asm-generic/uaccess.h>
#endif /* CONFIG_MMU */
#endif /* _ASM_RISCV_UACCESS_H */