356 lines
8.6 KiB
Plaintext
356 lines
8.6 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||
|
|
/*
|
||
|
|
* Copyright 2019-2021 TQ-Systems GmbH
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "imx8mq.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
|
||
|
|
compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
|
||
|
|
|
||
|
|
memory@40000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
/* our minimum RAM config will be 1024 MiB */
|
||
|
|
reg = <0x00000000 0x40000000 0 0x40000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* e-MMC IO, needed for HS modes */
|
||
|
|
reg_vcc1v8: regulator-vcc1v8 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "TQMA8MX_VCC1V8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_vcc3v3: regulator-vcc3v3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "TQMA8MX_VCC3V3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_vdd_arm: regulator-vdd-arm {
|
||
|
|
compatible = "regulator-gpio";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_dvfs>;
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
regulator-name = "TQMa8Mx_DVFS";
|
||
|
|
regulator-type = "voltage";
|
||
|
|
regulator-settling-time-us = <150000>;
|
||
|
|
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||
|
|
states = <900000 0x1 1000000 0x0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reserved-memory {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
ranges;
|
||
|
|
|
||
|
|
/* global autoconfigured region for contiguous allocations */
|
||
|
|
linux,cma {
|
||
|
|
compatible = "shared-dma-pool";
|
||
|
|
reusable;
|
||
|
|
/* 640 MiB */
|
||
|
|
size = <0 0x28000000>;
|
||
|
|
/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
|
||
|
|
alloc-ranges = <0 0x40000000 0 0x78000000>;
|
||
|
|
linux,cma-default;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_0 {
|
||
|
|
cpu-supply = <®_vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_1 {
|
||
|
|
cpu-supply = <®_vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_2 {
|
||
|
|
cpu-supply = <®_vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&A53_3 {
|
||
|
|
cpu-supply = <®_vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pgc_gpu {
|
||
|
|
power-supply = <&sw1a_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pgc_vpu {
|
||
|
|
power-supply = <&sw1c_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default", "gpio";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||
|
|
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||
|
|
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pfuze100: pmic@8 {
|
||
|
|
compatible = "fsl,pfuze100";
|
||
|
|
fsl,pfuze-support-disable-sw;
|
||
|
|
reg = <0x8>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
/* VDD_GPU */
|
||
|
|
sw1a_reg: sw1ab {
|
||
|
|
regulator-min-microvolt = <825000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_VPU */
|
||
|
|
sw1c_reg: sw1c {
|
||
|
|
regulator-min-microvolt = <825000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* NVCC_DRAM */
|
||
|
|
sw2_reg: sw2 {
|
||
|
|
regulator-min-microvolt = <1100000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_DRAM */
|
||
|
|
sw3a_reg: sw3ab {
|
||
|
|
regulator-min-microvolt = <825000>;
|
||
|
|
regulator-max-microvolt = <1100000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
|
||
|
|
nvcc_1v8_reg: sw4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
swbst_reg: swbst {
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5150000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
snvs_reg: vsnvs {
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vref_reg: vrefddr {
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* not used */
|
||
|
|
vgen1_reg: vgen1 {
|
||
|
|
regulator-min-microvolt = <800000>;
|
||
|
|
regulator-max-microvolt = <1550000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_PHY_0V9 */
|
||
|
|
vgen2_reg: vgen2 {
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <975000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_PHY_1V8 */
|
||
|
|
vgen3_reg: vgen3 {
|
||
|
|
regulator-min-microvolt = <1675000>;
|
||
|
|
regulator-max-microvolt = <1975000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDDA_1V8 */
|
||
|
|
vgen4_reg: vgen4 {
|
||
|
|
regulator-min-microvolt = <1625000>;
|
||
|
|
regulator-max-microvolt = <1875000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_PHY_3V3 */
|
||
|
|
vgen5_reg: vgen5 {
|
||
|
|
regulator-min-microvolt = <3075000>;
|
||
|
|
regulator-max-microvolt = <3625000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* not used */
|
||
|
|
vgen6_reg: vgen6 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sensor0: temperature-sensor-eeprom@1b {
|
||
|
|
compatible = "nxp,se97", "jedec,jc-42.4-temp";
|
||
|
|
reg = <0x1b>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pcf85063: rtc@51 {
|
||
|
|
compatible = "nxp,pcf85063a";
|
||
|
|
reg = <0x51>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_rtc>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
quartz-load-femtofarads = <7000>;
|
||
|
|
|
||
|
|
clock {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom1: eeprom@53 {
|
||
|
|
compatible = "nxp,se97b", "atmel,24c02";
|
||
|
|
reg = <0x53>;
|
||
|
|
pagesize = <16>;
|
||
|
|
read-only;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom0: eeprom@57 {
|
||
|
|
compatible = "atmel,24c64";
|
||
|
|
reg = <0x57>;
|
||
|
|
pagesize = <32>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie0 {
|
||
|
|
/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
|
||
|
|
vph-supply = <&vgen5_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie1 {
|
||
|
|
/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
|
||
|
|
vph-supply = <&vgen5_reg>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&qspi0 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_qspi>;
|
||
|
|
assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
|
||
|
|
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
flash0: flash@0 {
|
||
|
|
compatible = "jedec,spi-nor";
|
||
|
|
reg = <0>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
spi-max-frequency = <84000000>;
|
||
|
|
spi-tx-bus-width = <1>;
|
||
|
|
spi-rx-bus-width = <4>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc1 {
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||
|
|
bus-width = <8>;
|
||
|
|
non-removable;
|
||
|
|
no-sd;
|
||
|
|
no-sdio;
|
||
|
|
vmmc-supply = <®_vcc3v3>;
|
||
|
|
vqmmc-supply = <®_vcc1v8>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Attention: wdog reset forcing POR needs baseboard support */
|
||
|
|
&wdog1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl_dvfs: dvfsgrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f>,
|
||
|
|
<MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1_gpio: i2c1gpiogrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074>,
|
||
|
|
<MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_qspi: qspigrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97>,
|
||
|
|
<MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
|
||
|
|
<MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97>,
|
||
|
|
<MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97>,
|
||
|
|
<MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97>,
|
||
|
|
<MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_rtc: rtcgrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1: usdhc1grp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87>,
|
||
|
|
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>;
|
||
|
|
};
|
||
|
|
};
|