662 lines
16 KiB
Plaintext
662 lines
16 KiB
Plaintext
|
/*
|
||
|
|
* Support for imx6 based Advantech DMS-BA16 Qseven module
|
||
|
|
*
|
||
|
|
* Copyright 2015 Timesys Corporation.
|
||
|
|
* Copyright 2015 General Electric Company
|
||
|
|
*
|
||
|
|
* This file is dual-licensed: you can use it either under the terms
|
||
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||
|
|
* licensing only applies to this file, and not this project as a
|
||
|
|
* whole.
|
||
|
|
*
|
||
|
|
* a) This file is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License
|
||
|
|
* version 2 as published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This file is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* Or, alternatively,
|
||
|
|
*
|
||
|
|
* b) Permission is hereby granted, free of charge, to any person
|
||
|
|
* obtaining a copy of this software and associated documentation
|
||
|
|
* files (the "Software"), to deal in the Software without
|
||
|
|
* restriction, including without limitation the rights to use,
|
||
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||
|
|
* sell copies of the Software, and to permit persons to whom the
|
||
|
|
* Software is furnished to do so, subject to the following
|
||
|
|
* conditions:
|
||
|
|
*
|
||
|
|
* The above copyright notice and this permission notice shall be
|
||
|
|
* included in all copies or substantial portions of the Software.
|
||
|
|
*
|
||
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "imx6q.dtsi"
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
memory@10000000 {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x10000000 0x40000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight_lvds: backlight {
|
||
|
|
compatible = "pwm-backlight";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_display>;
|
||
|
|
pwms = <&pwm1 0 5000000>;
|
||
|
|
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||
|
|
10 11 12 13 14 15 16 17 18 19
|
||
|
|
20 21 22 23 24 25 26 27 28 29
|
||
|
|
30 31 32 33 34 35 36 37 38 39
|
||
|
|
40 41 42 43 44 45 46 47 48 49
|
||
|
|
50 51 52 53 54 55 56 57 58 59
|
||
|
|
60 61 62 63 64 65 66 67 68 69
|
||
|
|
70 71 72 73 74 75 76 77 78 79
|
||
|
|
80 81 82 83 84 85 86 87 88 89
|
||
|
|
90 91 92 93 94 95 96 97 98 99
|
||
|
|
100 101 102 103 104 105 106 107 108 109
|
||
|
|
110 111 112 113 114 115 116 117 118 119
|
||
|
|
120 121 122 123 124 125 126 127 128 129
|
||
|
|
130 131 132 133 134 135 136 137 138 139
|
||
|
|
140 141 142 143 144 145 146 147 148 149
|
||
|
|
150 151 152 153 154 155 156 157 158 159
|
||
|
|
160 161 162 163 164 165 166 167 168 169
|
||
|
|
170 171 172 173 174 175 176 177 178 179
|
||
|
|
180 181 182 183 184 185 186 187 188 189
|
||
|
|
190 191 192 193 194 195 196 197 198 199
|
||
|
|
200 201 202 203 204 205 206 207 208 209
|
||
|
|
210 211 212 213 214 215 216 217 218 219
|
||
|
|
220 221 222 223 224 225 226 227 228 229
|
||
|
|
230 231 232 233 234 235 236 237 238 239
|
||
|
|
240 241 242 243 244 245 246 247 248 249
|
||
|
|
250 251 252 253 254 255>;
|
||
|
|
default-brightness-level = <255>;
|
||
|
|
enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_1p8v: regulator-1p8v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "1P8V";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_3p3v: regulator-3p3v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "3P3V";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_lvds: regulator-lvds {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "lvds_ppen";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_h1_vbus: regulator-usbh1vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_h1_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_otg_vbus: regulator-usbotgvbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_otg_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
pinctrl-0 = <&pinctrl_usbotg_vbus>;
|
||
|
|
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&audmux {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ecspi1 {
|
||
|
|
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
flash: flash@0 {
|
||
|
|
compatible = "jedec,spi-nor";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
spi-max-frequency = <20000000>;
|
||
|
|
reg = <0>;
|
||
|
|
|
||
|
|
partition@0 {
|
||
|
|
label = "U-Boot";
|
||
|
|
reg = <0x0 0xc0000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@c0000 {
|
||
|
|
label = "env";
|
||
|
|
reg = <0xc0000 0x10000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@d0000 {
|
||
|
|
label = "spare";
|
||
|
|
reg = <0xd0000 0x320000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
partition@3f0000 {
|
||
|
|
label = "mfg";
|
||
|
|
reg = <0x3f0000 0x10000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&fec {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_enet>;
|
||
|
|
phy-mode = "rgmii-id";
|
||
|
|
phy-supply = <®_3p3v>;
|
||
|
|
phy-handle = <&phy0>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
phy0: ethernet-phy@4 {
|
||
|
|
reg = <4>;
|
||
|
|
qca,clk-out-frequency = <125000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi {
|
||
|
|
ddc-i2c-bus = <&i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
pmic@58 {
|
||
|
|
compatible = "dlg,da9063";
|
||
|
|
reg = <0x58>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
||
|
|
interrupt-parent = <&gpio7>;
|
||
|
|
interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
|
||
|
|
onkey {
|
||
|
|
compatible = "dlg,da9063-onkey";
|
||
|
|
};
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
vdd_bcore1: bcore1 {
|
||
|
|
regulator-min-microvolt = <1420000>;
|
||
|
|
regulator-max-microvolt = <1420000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_bcore2: bcore2 {
|
||
|
|
regulator-min-microvolt = <1420000>;
|
||
|
|
regulator-max-microvolt = <1420000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_bpro: bpro {
|
||
|
|
regulator-min-microvolt = <1500000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_bmem: bmem {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_bio: bio {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_bperi: bperi {
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo1: ldo1 {
|
||
|
|
regulator-min-microvolt = <600000>;
|
||
|
|
regulator-max-microvolt = <1860000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo2: ldo2 {
|
||
|
|
regulator-min-microvolt = <600000>;
|
||
|
|
regulator-max-microvolt = <1860000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo3: ldo3 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3440000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo4: ldo4 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3440000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo5: ldo5 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo6: ldo6 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo7: ldo7 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo8: ldo8 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo9: ldo9 {
|
||
|
|
regulator-min-microvolt = <950000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo10: ldo10 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_ldo11: ldo11 {
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
rtc@32 {
|
||
|
|
compatible = "epson,rx8010";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_rtc>;
|
||
|
|
reg = <0x32>;
|
||
|
|
interrupt-parent = <&gpio4>;
|
||
|
|
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
||
|
|
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
|
||
|
|
fsl,tx-swing-full = <103>;
|
||
|
|
fsl,tx-swing-low = <103>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm1 {
|
||
|
|
#pwm-cells = <2>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm2>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sata {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ssi1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
||
|
|
uart-has-rtscts;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbh1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usbhub>;
|
||
|
|
vbus-supply = <®_usb_h1_vbus>;
|
||
|
|
reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg {
|
||
|
|
vbus-supply = <®_usb_otg_vbus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
||
|
|
disable-over-current;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||
|
|
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||
|
|
no-1-8-v;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
wakeup-source;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
|
||
|
|
bus-width = <8>;
|
||
|
|
vmmc-supply = <&vdd_bperi>;
|
||
|
|
non-removable;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wdog1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
|
fsl,ext-reset-output;
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_hog>;
|
||
|
|
|
||
|
|
pinctrl_audmux: audmuxgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
|
||
|
|
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
|
||
|
|
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
|
||
|
|
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_display: dispgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* BLEN_OUT */
|
||
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
|
||
|
|
/* LVDS_PPEN_OUT */
|
||
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi1: ecspi1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||
|
|
/* SPI1 CS */
|
||
|
|
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_ecspi5: ecspi5grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b0b0
|
||
|
|
MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x1b0b0
|
||
|
|
MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x1b0b0
|
||
|
|
MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_enet: enetgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
|
||
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
|
||
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
|
||
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
|
||
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
|
||
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
||
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
||
|
|
/* FEC Reset */
|
||
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
|
||
|
|
/* AR8033 Interrupt */
|
||
|
|
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_hog: hoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* GPIO 0-7 */
|
||
|
|
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
|
||
|
|
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x1b0b0
|
||
|
|
/* SUS_S3_OUT to CPLD */
|
||
|
|
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
|
||
|
|
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c2: i2c2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pcie: pciegrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* PCIe Reset */
|
||
|
|
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
|
||
|
|
/* PCIe Wake */
|
||
|
|
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pmic: pmicgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* PMIC Interrupt */
|
||
|
|
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm1: pwm1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm2: pwm2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_rtc: rtcgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* RTC_INT */
|
||
|
|
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart3: uart3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart4: uart4grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbhub: usbhubgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
/* HUB_RESET */
|
||
|
|
MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbotg: usbotggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbotg_vbus: usbotgvbusgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc2: usdhc2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
|
||
|
|
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
|
||
|
|
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
|
||
|
|
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
|
||
|
|
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
|
||
|
|
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
|
||
|
|
/* uSDHC2 CD */
|
||
|
|
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_reset: usdhc3grp-reset {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc4: usdhc4grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
||
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
||
|
|
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
||
|
|
/* uSDHC4 CD */
|
||
|
|
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
|
||
|
|
/* uSDHC4 SDIO PWR */
|
||
|
|
MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
|
||
|
|
/* uSDHC4 SDIO WP */
|
||
|
|
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
|
||
|
|
/* uSDHC4 SDIO LED */
|
||
|
|
MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|