99 lines
2.4 KiB
YAML
99 lines
2.4 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/regulator/ti,tps62360.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Texas Instruments TPS6236x Voltage Regulators
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Laxman Dewangan <ldewangan@nvidia.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
The TPS6236x are a family of step down dc-dc converter with
|
||
|
|
an input voltage range of 2.5V to 5.5V. The devices provide
|
||
|
|
up to 3A peak load current, and an output voltage range of
|
||
|
|
0.77V to 1.4V (TPS62360/62) and 0.5V to 1.77V (TPS62361B/63).
|
||
|
|
|
||
|
|
Datasheet is available at:
|
||
|
|
https://www.ti.com/lit/gpn/tps62360
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: "regulator.yaml#"
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- ti,tps62360
|
||
|
|
- ti,tps62361
|
||
|
|
- ti,tps62362
|
||
|
|
- ti,tps62363
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,vsel0-gpio:
|
||
|
|
description: |
|
||
|
|
GPIO for controlling VSEL0 line. If this property
|
||
|
|
is missing, then assume that there is no GPIO for
|
||
|
|
VSEL0 control.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,vsel1-gpio:
|
||
|
|
description: |
|
||
|
|
GPIO for controlling VSEL1 line. If this property
|
||
|
|
is missing, then assume that there is no GPIO for
|
||
|
|
VSEL1 control.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
ti,enable-vout-discharge:
|
||
|
|
description: Enable output discharge.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
ti,enable-pull-down:
|
||
|
|
description: Enable pull down.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
ti,vsel0-state-high:
|
||
|
|
description: |
|
||
|
|
Initial state of VSEL0 input is high. If this property
|
||
|
|
is missing, then assume the state as low.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
ti,vsel1-state-high:
|
||
|
|
description: |
|
||
|
|
Initial state of VSEL1 input is high. If this property
|
||
|
|
is missing, then assume the state as low.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
regulator@60 {
|
||
|
|
compatible = "ti,tps62361";
|
||
|
|
reg = <0x60>;
|
||
|
|
regulator-name = "tps62361-vout";
|
||
|
|
regulator-min-microvolt = <500000>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
ti,vsel0-gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||
|
|
ti,vsel1-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||
|
|
ti,vsel0-state-high;
|
||
|
|
ti,vsel1-state-high;
|
||
|
|
ti,enable-pull-down;
|
||
|
|
ti,enable-vout-discharge;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
...
|