462 lines
12 KiB
Plaintext
462 lines
12 KiB
Plaintext
|
Broadcom BCM281xx Pin Controller
|
||
|
|
|
||
|
|
This is a pin controller for the Broadcom BCM281xx SoC family, which includes
|
||
|
|
BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
|
||
|
|
|
||
|
|
=== Pin Controller Node ===
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
|
||
|
|
- compatible: Must be "brcm,bcm11351-pinctrl"
|
||
|
|
- reg: Base address of the PAD Controller register block and the size
|
||
|
|
of the block.
|
||
|
|
|
||
|
|
For example, the following is the bare minimum node:
|
||
|
|
|
||
|
|
pinctrl@35004800 {
|
||
|
|
compatible = "brcm,bcm11351-pinctrl";
|
||
|
|
reg = <0x35004800 0x430>;
|
||
|
|
};
|
||
|
|
|
||
|
|
As a pin controller device, in addition to the required properties, this node
|
||
|
|
should also contain the pin configuration nodes that client devices reference,
|
||
|
|
if any.
|
||
|
|
|
||
|
|
=== Pin Configuration Node ===
|
||
|
|
|
||
|
|
Each pin configuration node is a sub-node of the pin controller node and is a
|
||
|
|
container of an arbitrary number of subnodes, called pin group nodes in this
|
||
|
|
document.
|
||
|
|
|
||
|
|
Please refer to the pinctrl-bindings.txt in this directory for details of the
|
||
|
|
common pinctrl bindings used by client devices, including the definition of a
|
||
|
|
"pin configuration node".
|
||
|
|
|
||
|
|
=== Pin Group Node ===
|
||
|
|
|
||
|
|
A pin group node specifies the desired pin mux and/or pin configuration for an
|
||
|
|
arbitrary number of pins. The name of the pin group node is optional and not
|
||
|
|
used.
|
||
|
|
|
||
|
|
A pin group node only affects the properties specified in the node, and has no
|
||
|
|
effect on any properties that are omitted.
|
||
|
|
|
||
|
|
The pin group node accepts a subset of the generic pin config properties. For
|
||
|
|
details generic pin config properties, please refer to pinctrl-bindings.txt
|
||
|
|
and <include/linux/pinctrl/pinconfig-generic.h>.
|
||
|
|
|
||
|
|
Each pin controlled by this pin controller belong to one of three types:
|
||
|
|
Standard, I2C, and HDMI. Each type accepts a different set of pin config
|
||
|
|
properties. A list of pins and their types is provided below.
|
||
|
|
|
||
|
|
Required Properties (applicable to all pins):
|
||
|
|
|
||
|
|
- pins: Multiple strings. Specifies the name(s) of one or more pins to
|
||
|
|
be configured by this node.
|
||
|
|
|
||
|
|
Optional Properties (for standard pins):
|
||
|
|
|
||
|
|
- function: String. Specifies the pin mux selection. Values
|
||
|
|
must be one of: "alt1", "alt2", "alt3", "alt4"
|
||
|
|
- input-schmitt-enable: No arguments. Enable schmitt-trigger mode.
|
||
|
|
- input-schmitt-disable: No arguments. Disable schmitt-trigger mode.
|
||
|
|
- bias-pull-up: No arguments. Pull up on pin.
|
||
|
|
- bias-pull-down: No arguments. Pull down on pin.
|
||
|
|
- bias-disable: No arguments. Disable pin bias.
|
||
|
|
- slew-rate: Integer. Meaning depends on configured pin mux:
|
||
|
|
*_SCL or *_SDA:
|
||
|
|
0: Standard(100kbps)& Fast(400kbps) mode
|
||
|
|
1: Highspeed (3.4Mbps) mode
|
||
|
|
IC_DM or IC_DP:
|
||
|
|
0: normal slew rate
|
||
|
|
1: fast slew rate
|
||
|
|
Otherwise:
|
||
|
|
0: fast slew rate
|
||
|
|
1: normal slew rate
|
||
|
|
- input-enable: No arguments. Enable input (does not affect
|
||
|
|
output.)
|
||
|
|
- input-disable: No arguments. Disable input (does not affect
|
||
|
|
output.)
|
||
|
|
- drive-strength: Integer. Drive strength in mA. Valid values are
|
||
|
|
2, 4, 6, 8, 10, 12, 14, 16 mA.
|
||
|
|
|
||
|
|
Optional Properties (for I2C pins):
|
||
|
|
|
||
|
|
- function: String. Specifies the pin mux selection. Values
|
||
|
|
must be one of: "alt1", "alt2", "alt3", "alt4"
|
||
|
|
- bias-pull-up: Integer. Pull up strength in Ohm. There are 3
|
||
|
|
pull-up resistors (1.2k, 1.8k, 2.7k) available
|
||
|
|
in parallel for I2C pins, so the valid values
|
||
|
|
are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
|
||
|
|
- bias-disable: No arguments. Disable pin bias.
|
||
|
|
- slew-rate: Integer. Meaning depends on configured pin mux:
|
||
|
|
*_SCL or *_SDA:
|
||
|
|
0: Standard(100kbps)& Fast(400kbps) mode
|
||
|
|
1: Highspeed (3.4Mbps) mode
|
||
|
|
IC_DM or IC_DP:
|
||
|
|
0: normal slew rate
|
||
|
|
1: fast slew rate
|
||
|
|
Otherwise:
|
||
|
|
0: fast slew rate
|
||
|
|
1: normal slew rate
|
||
|
|
- input-enable: No arguments. Enable input (does not affect
|
||
|
|
output.)
|
||
|
|
- input-disable: No arguments. Disable input (does not affect
|
||
|
|
output.)
|
||
|
|
|
||
|
|
Optional Properties (for HDMI pins):
|
||
|
|
|
||
|
|
- function: String. Specifies the pin mux selection. Values
|
||
|
|
must be one of: "alt1", "alt2", "alt3", "alt4"
|
||
|
|
- slew-rate: Integer. Controls slew rate.
|
||
|
|
0: Standard(100kbps)& Fast(400kbps) mode
|
||
|
|
1: Highspeed (3.4Mbps) mode
|
||
|
|
- input-enable: No arguments. Enable input (does not affect
|
||
|
|
output.)
|
||
|
|
- input-disable: No arguments. Disable input (does not affect
|
||
|
|
output.)
|
||
|
|
|
||
|
|
Example:
|
||
|
|
// pin controller node
|
||
|
|
pinctrl@35004800 {
|
||
|
|
compatible = "brcm,bcm11351-pinctrl";
|
||
|
|
reg = <0x35004800 0x430>;
|
||
|
|
|
||
|
|
// pin configuration node
|
||
|
|
dev_a_default: dev_a_active {
|
||
|
|
//group node defining 1 standard pin
|
||
|
|
grp_1 {
|
||
|
|
pins = "std_pin1";
|
||
|
|
function = "alt1";
|
||
|
|
input-schmitt-enable;
|
||
|
|
bias-disable;
|
||
|
|
slew-rate = <1>;
|
||
|
|
drive-strength = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
// group node defining 2 I2C pins
|
||
|
|
grp_2 {
|
||
|
|
pins = "i2c_pin1", "i2c_pin2";
|
||
|
|
function = "alt2";
|
||
|
|
bias-pull-up = <720>;
|
||
|
|
input-enable;
|
||
|
|
};
|
||
|
|
|
||
|
|
// group node defining 2 HDMI pins
|
||
|
|
grp_3 {
|
||
|
|
pins = "hdmi_pin1", "hdmi_pin2";
|
||
|
|
function = "alt3";
|
||
|
|
slew-rate = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
// other pin group nodes
|
||
|
|
...
|
||
|
|
};
|
||
|
|
|
||
|
|
// other pin configuration nodes
|
||
|
|
...
|
||
|
|
};
|
||
|
|
|
||
|
|
In the example above, "dev_a_active" is a pin configuration node with a number
|
||
|
|
of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in
|
||
|
|
the "pins" property. Thus, the remaining properties in the "grp_1" node applies
|
||
|
|
only to this pin, including the following settings:
|
||
|
|
- setting pinmux to "alt1"
|
||
|
|
- enabling schmitt-trigger (hystersis) mode
|
||
|
|
- disabling pin bias
|
||
|
|
- setting the slew-rate to 1
|
||
|
|
- setting the drive strength to 4 mA
|
||
|
|
Note that neither "input-enable" nor "input-disable" was specified - the pinctrl
|
||
|
|
subsystem will therefore leave this property unchanged from whatever state it
|
||
|
|
was in before applying these changes.
|
||
|
|
|
||
|
|
The "pins" property in the pin group node "grp_2" specifies two pins -
|
||
|
|
"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node,
|
||
|
|
therefore, applies to both of these pins. The properties include:
|
||
|
|
- setting pinmux to "alt2"
|
||
|
|
- setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors
|
||
|
|
in parallel)
|
||
|
|
- enabling both pins' input
|
||
|
|
"slew-rate" is not specified in this pin group node, so the slew-rate for these
|
||
|
|
pins are left as-is.
|
||
|
|
|
||
|
|
Finally, "grp_3" defines two HDMI pins. The following properties are applied to
|
||
|
|
both pins:
|
||
|
|
- setting pinmux to "alt3"
|
||
|
|
- setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps
|
||
|
|
Highspeed mode
|
||
|
|
The input is neither enabled or disabled, and is left untouched.
|
||
|
|
|
||
|
|
=== Pin Names and Type ===
|
||
|
|
|
||
|
|
The following are valid pin names and their pin types:
|
||
|
|
|
||
|
|
"adcsync", Standard
|
||
|
|
"bat_rm", Standard
|
||
|
|
"bsc1_scl", I2C
|
||
|
|
"bsc1_sda", I2C
|
||
|
|
"bsc2_scl", I2C
|
||
|
|
"bsc2_sda", I2C
|
||
|
|
"classgpwr", Standard
|
||
|
|
"clk_cx8", Standard
|
||
|
|
"clkout_0", Standard
|
||
|
|
"clkout_1", Standard
|
||
|
|
"clkout_2", Standard
|
||
|
|
"clkout_3", Standard
|
||
|
|
"clkreq_in_0", Standard
|
||
|
|
"clkreq_in_1", Standard
|
||
|
|
"cws_sys_req1", Standard
|
||
|
|
"cws_sys_req2", Standard
|
||
|
|
"cws_sys_req3", Standard
|
||
|
|
"digmic1_clk", Standard
|
||
|
|
"digmic1_dq", Standard
|
||
|
|
"digmic2_clk", Standard
|
||
|
|
"digmic2_dq", Standard
|
||
|
|
"gpen13", Standard
|
||
|
|
"gpen14", Standard
|
||
|
|
"gpen15", Standard
|
||
|
|
"gpio00", Standard
|
||
|
|
"gpio01", Standard
|
||
|
|
"gpio02", Standard
|
||
|
|
"gpio03", Standard
|
||
|
|
"gpio04", Standard
|
||
|
|
"gpio05", Standard
|
||
|
|
"gpio06", Standard
|
||
|
|
"gpio07", Standard
|
||
|
|
"gpio08", Standard
|
||
|
|
"gpio09", Standard
|
||
|
|
"gpio10", Standard
|
||
|
|
"gpio11", Standard
|
||
|
|
"gpio12", Standard
|
||
|
|
"gpio13", Standard
|
||
|
|
"gpio14", Standard
|
||
|
|
"gps_pablank", Standard
|
||
|
|
"gps_tmark", Standard
|
||
|
|
"hdmi_scl", HDMI
|
||
|
|
"hdmi_sda", HDMI
|
||
|
|
"ic_dm", Standard
|
||
|
|
"ic_dp", Standard
|
||
|
|
"kp_col_ip_0", Standard
|
||
|
|
"kp_col_ip_1", Standard
|
||
|
|
"kp_col_ip_2", Standard
|
||
|
|
"kp_col_ip_3", Standard
|
||
|
|
"kp_row_op_0", Standard
|
||
|
|
"kp_row_op_1", Standard
|
||
|
|
"kp_row_op_2", Standard
|
||
|
|
"kp_row_op_3", Standard
|
||
|
|
"lcd_b_0", Standard
|
||
|
|
"lcd_b_1", Standard
|
||
|
|
"lcd_b_2", Standard
|
||
|
|
"lcd_b_3", Standard
|
||
|
|
"lcd_b_4", Standard
|
||
|
|
"lcd_b_5", Standard
|
||
|
|
"lcd_b_6", Standard
|
||
|
|
"lcd_b_7", Standard
|
||
|
|
"lcd_g_0", Standard
|
||
|
|
"lcd_g_1", Standard
|
||
|
|
"lcd_g_2", Standard
|
||
|
|
"lcd_g_3", Standard
|
||
|
|
"lcd_g_4", Standard
|
||
|
|
"lcd_g_5", Standard
|
||
|
|
"lcd_g_6", Standard
|
||
|
|
"lcd_g_7", Standard
|
||
|
|
"lcd_hsync", Standard
|
||
|
|
"lcd_oe", Standard
|
||
|
|
"lcd_pclk", Standard
|
||
|
|
"lcd_r_0", Standard
|
||
|
|
"lcd_r_1", Standard
|
||
|
|
"lcd_r_2", Standard
|
||
|
|
"lcd_r_3", Standard
|
||
|
|
"lcd_r_4", Standard
|
||
|
|
"lcd_r_5", Standard
|
||
|
|
"lcd_r_6", Standard
|
||
|
|
"lcd_r_7", Standard
|
||
|
|
"lcd_vsync", Standard
|
||
|
|
"mdmgpio0", Standard
|
||
|
|
"mdmgpio1", Standard
|
||
|
|
"mdmgpio2", Standard
|
||
|
|
"mdmgpio3", Standard
|
||
|
|
"mdmgpio4", Standard
|
||
|
|
"mdmgpio5", Standard
|
||
|
|
"mdmgpio6", Standard
|
||
|
|
"mdmgpio7", Standard
|
||
|
|
"mdmgpio8", Standard
|
||
|
|
"mphi_data_0", Standard
|
||
|
|
"mphi_data_1", Standard
|
||
|
|
"mphi_data_2", Standard
|
||
|
|
"mphi_data_3", Standard
|
||
|
|
"mphi_data_4", Standard
|
||
|
|
"mphi_data_5", Standard
|
||
|
|
"mphi_data_6", Standard
|
||
|
|
"mphi_data_7", Standard
|
||
|
|
"mphi_data_8", Standard
|
||
|
|
"mphi_data_9", Standard
|
||
|
|
"mphi_data_10", Standard
|
||
|
|
"mphi_data_11", Standard
|
||
|
|
"mphi_data_12", Standard
|
||
|
|
"mphi_data_13", Standard
|
||
|
|
"mphi_data_14", Standard
|
||
|
|
"mphi_data_15", Standard
|
||
|
|
"mphi_ha0", Standard
|
||
|
|
"mphi_hat0", Standard
|
||
|
|
"mphi_hat1", Standard
|
||
|
|
"mphi_hce0_n", Standard
|
||
|
|
"mphi_hce1_n", Standard
|
||
|
|
"mphi_hrd_n", Standard
|
||
|
|
"mphi_hwr_n", Standard
|
||
|
|
"mphi_run0", Standard
|
||
|
|
"mphi_run1", Standard
|
||
|
|
"mtx_scan_clk", Standard
|
||
|
|
"mtx_scan_data", Standard
|
||
|
|
"nand_ad_0", Standard
|
||
|
|
"nand_ad_1", Standard
|
||
|
|
"nand_ad_2", Standard
|
||
|
|
"nand_ad_3", Standard
|
||
|
|
"nand_ad_4", Standard
|
||
|
|
"nand_ad_5", Standard
|
||
|
|
"nand_ad_6", Standard
|
||
|
|
"nand_ad_7", Standard
|
||
|
|
"nand_ale", Standard
|
||
|
|
"nand_cen_0", Standard
|
||
|
|
"nand_cen_1", Standard
|
||
|
|
"nand_cle", Standard
|
||
|
|
"nand_oen", Standard
|
||
|
|
"nand_rdy_0", Standard
|
||
|
|
"nand_rdy_1", Standard
|
||
|
|
"nand_wen", Standard
|
||
|
|
"nand_wp", Standard
|
||
|
|
"pc1", Standard
|
||
|
|
"pc2", Standard
|
||
|
|
"pmu_int", Standard
|
||
|
|
"pmu_scl", I2C
|
||
|
|
"pmu_sda", I2C
|
||
|
|
"rfst2g_mtsloten3g", Standard
|
||
|
|
"rgmii_0_rx_ctl", Standard
|
||
|
|
"rgmii_0_rxc", Standard
|
||
|
|
"rgmii_0_rxd_0", Standard
|
||
|
|
"rgmii_0_rxd_1", Standard
|
||
|
|
"rgmii_0_rxd_2", Standard
|
||
|
|
"rgmii_0_rxd_3", Standard
|
||
|
|
"rgmii_0_tx_ctl", Standard
|
||
|
|
"rgmii_0_txc", Standard
|
||
|
|
"rgmii_0_txd_0", Standard
|
||
|
|
"rgmii_0_txd_1", Standard
|
||
|
|
"rgmii_0_txd_2", Standard
|
||
|
|
"rgmii_0_txd_3", Standard
|
||
|
|
"rgmii_1_rx_ctl", Standard
|
||
|
|
"rgmii_1_rxc", Standard
|
||
|
|
"rgmii_1_rxd_0", Standard
|
||
|
|
"rgmii_1_rxd_1", Standard
|
||
|
|
"rgmii_1_rxd_2", Standard
|
||
|
|
"rgmii_1_rxd_3", Standard
|
||
|
|
"rgmii_1_tx_ctl", Standard
|
||
|
|
"rgmii_1_txc", Standard
|
||
|
|
"rgmii_1_txd_0", Standard
|
||
|
|
"rgmii_1_txd_1", Standard
|
||
|
|
"rgmii_1_txd_2", Standard
|
||
|
|
"rgmii_1_txd_3", Standard
|
||
|
|
"rgmii_gpio_0", Standard
|
||
|
|
"rgmii_gpio_1", Standard
|
||
|
|
"rgmii_gpio_2", Standard
|
||
|
|
"rgmii_gpio_3", Standard
|
||
|
|
"rtxdata2g_txdata3g1", Standard
|
||
|
|
"rtxen2g_txdata3g2", Standard
|
||
|
|
"rxdata3g0", Standard
|
||
|
|
"rxdata3g1", Standard
|
||
|
|
"rxdata3g2", Standard
|
||
|
|
"sdio1_clk", Standard
|
||
|
|
"sdio1_cmd", Standard
|
||
|
|
"sdio1_data_0", Standard
|
||
|
|
"sdio1_data_1", Standard
|
||
|
|
"sdio1_data_2", Standard
|
||
|
|
"sdio1_data_3", Standard
|
||
|
|
"sdio4_clk", Standard
|
||
|
|
"sdio4_cmd", Standard
|
||
|
|
"sdio4_data_0", Standard
|
||
|
|
"sdio4_data_1", Standard
|
||
|
|
"sdio4_data_2", Standard
|
||
|
|
"sdio4_data_3", Standard
|
||
|
|
"sim_clk", Standard
|
||
|
|
"sim_data", Standard
|
||
|
|
"sim_det", Standard
|
||
|
|
"sim_resetn", Standard
|
||
|
|
"sim2_clk", Standard
|
||
|
|
"sim2_data", Standard
|
||
|
|
"sim2_det", Standard
|
||
|
|
"sim2_resetn", Standard
|
||
|
|
"sri_c", Standard
|
||
|
|
"sri_d", Standard
|
||
|
|
"sri_e", Standard
|
||
|
|
"ssp_extclk", Standard
|
||
|
|
"ssp0_clk", Standard
|
||
|
|
"ssp0_fs", Standard
|
||
|
|
"ssp0_rxd", Standard
|
||
|
|
"ssp0_txd", Standard
|
||
|
|
"ssp2_clk", Standard
|
||
|
|
"ssp2_fs_0", Standard
|
||
|
|
"ssp2_fs_1", Standard
|
||
|
|
"ssp2_fs_2", Standard
|
||
|
|
"ssp2_fs_3", Standard
|
||
|
|
"ssp2_rxd_0", Standard
|
||
|
|
"ssp2_rxd_1", Standard
|
||
|
|
"ssp2_txd_0", Standard
|
||
|
|
"ssp2_txd_1", Standard
|
||
|
|
"ssp3_clk", Standard
|
||
|
|
"ssp3_fs", Standard
|
||
|
|
"ssp3_rxd", Standard
|
||
|
|
"ssp3_txd", Standard
|
||
|
|
"ssp4_clk", Standard
|
||
|
|
"ssp4_fs", Standard
|
||
|
|
"ssp4_rxd", Standard
|
||
|
|
"ssp4_txd", Standard
|
||
|
|
"ssp5_clk", Standard
|
||
|
|
"ssp5_fs", Standard
|
||
|
|
"ssp5_rxd", Standard
|
||
|
|
"ssp5_txd", Standard
|
||
|
|
"ssp6_clk", Standard
|
||
|
|
"ssp6_fs", Standard
|
||
|
|
"ssp6_rxd", Standard
|
||
|
|
"ssp6_txd", Standard
|
||
|
|
"stat_1", Standard
|
||
|
|
"stat_2", Standard
|
||
|
|
"sysclken", Standard
|
||
|
|
"traceclk", Standard
|
||
|
|
"tracedt00", Standard
|
||
|
|
"tracedt01", Standard
|
||
|
|
"tracedt02", Standard
|
||
|
|
"tracedt03", Standard
|
||
|
|
"tracedt04", Standard
|
||
|
|
"tracedt05", Standard
|
||
|
|
"tracedt06", Standard
|
||
|
|
"tracedt07", Standard
|
||
|
|
"tracedt08", Standard
|
||
|
|
"tracedt09", Standard
|
||
|
|
"tracedt10", Standard
|
||
|
|
"tracedt11", Standard
|
||
|
|
"tracedt12", Standard
|
||
|
|
"tracedt13", Standard
|
||
|
|
"tracedt14", Standard
|
||
|
|
"tracedt15", Standard
|
||
|
|
"txdata3g0", Standard
|
||
|
|
"txpwrind", Standard
|
||
|
|
"uartb1_ucts", Standard
|
||
|
|
"uartb1_urts", Standard
|
||
|
|
"uartb1_urxd", Standard
|
||
|
|
"uartb1_utxd", Standard
|
||
|
|
"uartb2_urxd", Standard
|
||
|
|
"uartb2_utxd", Standard
|
||
|
|
"uartb3_ucts", Standard
|
||
|
|
"uartb3_urts", Standard
|
||
|
|
"uartb3_urxd", Standard
|
||
|
|
"uartb3_utxd", Standard
|
||
|
|
"uartb4_ucts", Standard
|
||
|
|
"uartb4_urts", Standard
|
||
|
|
"uartb4_urxd", Standard
|
||
|
|
"uartb4_utxd", Standard
|
||
|
|
"vc_cam1_scl", I2C
|
||
|
|
"vc_cam1_sda", I2C
|
||
|
|
"vc_cam2_scl", I2C
|
||
|
|
"vc_cam2_sda", I2C
|
||
|
|
"vc_cam3_scl", I2C
|
||
|
|
"vc_cam3_sda", I2C
|