linuxdebug/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/microchip,sparx5-switch.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip Sparx5 Ethernet switch controller

maintainers:
  - Steen Hegelund <steen.hegelund@microchip.com>
  - Lars Povlsen <lars.povlsen@microchip.com>

description: |
  The SparX-5 Enterprise Ethernet switch family provides a rich set of
  Enterprise switching features such as advanced TCAM-based VLAN and
  QoS processing enabling delivery of differentiated services, and
  security through TCAM-based frame processing using versatile content
  aware processor (VCAP).

  IPv4/IPv6 Layer 3 (L3) unicast and multicast routing is supported
  with up to 18K IPv4/9K IPv6 unicast LPM entries and up to 9K IPv4/3K
  IPv6 (S,G) multicast groups.

  L3 security features include source guard and reverse path
  forwarding (uRPF) tasks. Additional L3 features include VRF-Lite and
  IP tunnels (IP over GRE/IP).

  The SparX-5 switch family targets managed Layer 2 and Layer 3
  equipment in SMB, SME, and Enterprise where high port count
  1G/2.5G/5G/10G switching with 10G/25G aggregation links is required.

properties:
  $nodename:
    pattern: "^switch@[0-9a-f]+$"

  compatible:
    const: microchip,sparx5-switch

  reg:
    items:
      - description: cpu target
      - description: devices target
      - description: general control block target

  reg-names:
    items:
      - const: cpu
      - const: devices
      - const: gcb

  interrupts:
    minItems: 1
    items:
      - description: register based extraction
      - description: frame dma based extraction
      - description: ptp interrupt

  interrupt-names:
    minItems: 1
    items:
      - const: xtr
      - const: fdma
      - const: ptp

  resets:
    items:
      - description: Reset controller used for switch core reset (soft reset)

  reset-names:
    items:
      - const: switch

  mac-address: true

  ethernet-ports:
    type: object
    additionalProperties: false

    properties:
      '#address-cells':
        const: 1
      '#size-cells':
        const: 0

    patternProperties:
      "^port@[0-9a-f]+$":
        $ref: /schemas/net/ethernet-controller.yaml#
        unevaluatedProperties: false

        properties:
          reg:
            description: Switch port number

          phys:
            maxItems: 1
            description:
              phandle of a Ethernet SerDes PHY.  This defines which SerDes
              instance will handle the Ethernet traffic.

          microchip,bandwidth:
            description: Specifies bandwidth in Mbit/s allocated to the port.
            $ref: "/schemas/types.yaml#/definitions/uint32"
            maximum: 25000

          microchip,sd-sgpio:
            description:
              Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
              This is optional, and only needed if the default used index is
              is not correct.
            $ref: "/schemas/types.yaml#/definitions/uint32"
            minimum: 0
            maximum: 383

        required:
          - reg
          - phys
          - phy-mode
          - microchip,bandwidth

        oneOf:
          - required:
              - phy-handle
          - required:
              - sfp
              - managed

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - interrupt-names
  - ethernet-ports

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    switch: switch@600000000 {
      compatible = "microchip,sparx5-switch";
      reg =  <0 0x401000>,
             <0x10004000 0x7fc000>,
             <0x11010000 0xaf0000>;
      reg-names = "cpu", "devices", "gcb";
      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
      interrupt-names = "xtr";
      resets = <&reset 0>;
      reset-names = "switch";
      ethernet-ports {
        #address-cells = <1>;
        #size-cells = <0>;

        port0: port@0 {
          reg = <0>;
          microchip,bandwidth = <1000>;
          phys = <&serdes 13>;
          phy-handle = <&phy0>;
          phy-mode = "qsgmii";
        };
        /* ... */
        /* Then the 25G interfaces */
        port60: port@60 {
          reg = <60>;
          microchip,bandwidth = <25000>;
          phys = <&serdes 29>;
          phy-mode = "10gbase-r";
          sfp = <&sfp_eth60>;
          managed = "in-band-status";
          microchip,sd-sgpio = <365>;
        };
        port61: port@61 {
          reg = <61>;
          microchip,bandwidth = <25000>;
          phys = <&serdes 30>;
          phy-mode = "10gbase-r";
          sfp = <&sfp_eth61>;
          managed = "in-band-status";
          microchip,sd-sgpio = <369>;
        };
        port62: port@62 {
          reg = <62>;
          microchip,bandwidth = <25000>;
          phys = <&serdes 31>;
          phy-mode = "10gbase-r";
          sfp = <&sfp_eth62>;
          managed = "in-band-status";
          microchip,sd-sgpio = <373>;
        };
        port63: port@63 {
          reg = <63>;
          microchip,bandwidth = <25000>;
          phys = <&serdes 32>;
          phy-mode = "10gbase-r";
          sfp = <&sfp_eth63>;
          managed = "in-band-status";
          microchip,sd-sgpio = <377>;
        };
        /* Finally the Management interface */
        port64: port@64 {
          reg = <64>;
          microchip,bandwidth = <1000>;
          phys = <&serdes 0>;
          phy-handle = <&phy64>;
          phy-mode = "sgmii";
          mac-address = [ 00 00 00 01 02 03 ];
        };
      };
    };

...
#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :