82 lines
2.1 KiB
Plaintext
82 lines
2.1 KiB
Plaintext
|
Marvell Prestera Switch Chip bindings
|
||
|
|
-------------------------------------
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: must be "marvell,prestera" and one of the following
|
||
|
|
"marvell,prestera-98dx3236",
|
||
|
|
"marvell,prestera-98dx3336",
|
||
|
|
"marvell,prestera-98dx4251",
|
||
|
|
- reg: address and length of the register set for the device.
|
||
|
|
- interrupts: interrupt for the device
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- dfx: phandle reference to the "DFX Server" node
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
switch {
|
||
|
|
compatible = "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
|
||
|
|
|
||
|
|
packet-processor@0 {
|
||
|
|
compatible = "marvell,prestera-98dx3236", "marvell,prestera";
|
||
|
|
reg = <0 0x4000000>;
|
||
|
|
interrupts = <33>, <34>, <35>;
|
||
|
|
dfx = <&dfx>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
DFX Server bindings
|
||
|
|
-------------------
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: must be "marvell,dfx-server", "simple-bus"
|
||
|
|
- ranges: describes the address mapping of a memory-mapped bus.
|
||
|
|
- reg: address and length of the register set for the device.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
dfx-server {
|
||
|
|
compatible = "marvell,dfx-server", "simple-bus";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
|
||
|
|
reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
Marvell Prestera SwitchDev bindings
|
||
|
|
-----------------------------------
|
||
|
|
Optional properties:
|
||
|
|
- compatible: must be "marvell,prestera"
|
||
|
|
- base-mac-provider: describes handle to node which provides base mac address,
|
||
|
|
might be a static base mac address or nvme cell provider.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
eeprom_mac_addr: eeprom-mac-addr {
|
||
|
|
compatible = "eeprom,mac-addr-cell";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
nvmem = <&eeprom_at24>;
|
||
|
|
};
|
||
|
|
|
||
|
|
prestera {
|
||
|
|
compatible = "marvell,prestera";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
base-mac-provider = <&eeprom_mac_addr>;
|
||
|
|
};
|
||
|
|
|
||
|
|
The current implementation of Prestera Switchdev PCI interface driver requires
|
||
|
|
that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
|
||
|
|
|
||
|
|
&cp0_pcie0 {
|
||
|
|
ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
|
||
|
|
0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
|
||
|
|
0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
|
||
|
|
phys = <&cp0_comphy0 0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|