linuxdebug/Documentation/devicetree/bindings/net/actions,owl-emac.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Actions Semi Owl SoCs Ethernet MAC Controller

maintainers:
  - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

description: |
  This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
  It provides the RMII and SMII interfaces and is compliant with the
  IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
  operation modes at 10/100 Mb/s data transfer rates.

allOf:
  - $ref: "ethernet-controller.yaml#"

properties:
  compatible:
    oneOf:
      - const: actions,owl-emac
      - items:
          - enum:
              - actions,s500-emac
          - const: actions,owl-emac

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    minItems: 2
    maxItems: 2

  clock-names:
    additionalItems: false
    items:
      - const: eth
      - const: rmii

  resets:
    maxItems: 1

  actions,ethcfg:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the device containing custom config.

  mdio:
    $ref: mdio.yaml#
    unevaluatedProperties: false

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - clock-names
  - resets
  - phy-mode
  - phy-handle

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/actions,s500-cmu.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/reset/actions,s500-reset.h>

    ethernet@b0310000 {
        compatible = "actions,s500-emac", "actions,owl-emac";
        reg = <0xb0310000 0x10000>;
        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
        clock-names = "eth", "rmii";
        resets = <&cmu RESET_ETHERNET>;
        phy-mode = "rmii";
        phy-handle = <&eth_phy>;

        mdio {
            #address-cells = <1>;
            #size-cells = <0>;

            eth_phy: ethernet-phy@3 {
                reg = <0x3>;
                interrupt-parent = <&sirq>;
                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
            };
        };
    };