196 lines
5.0 KiB
YAML
196 lines
5.0 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||
|
|
# Copyright 2020 Analog Devices Inc.
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Analog Devices AD5770R DAC device driver
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Alexandru Tachici <alexandru.tachici@analog.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
|
||
|
|
found here:
|
||
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/AD5770R.pdf
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- adi,ad5770r
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
avdd-supply:
|
||
|
|
description:
|
||
|
|
AVdd voltage supply. Represents two different supplies in the datasheet
|
||
|
|
that are in fact the same.
|
||
|
|
|
||
|
|
iovdd-supply:
|
||
|
|
description:
|
||
|
|
Voltage supply for the chip interface.
|
||
|
|
|
||
|
|
vref-supply:
|
||
|
|
description: Specify the voltage of the external reference used.
|
||
|
|
Available reference options are 1.25 V or 2.5 V. If no
|
||
|
|
external reference declared then the device will use the
|
||
|
|
internal reference of 1.25 V.
|
||
|
|
|
||
|
|
adi,external-resistor:
|
||
|
|
description: Specify if an external 2.5k ohm resistor is used. If not
|
||
|
|
specified the device will use an internal 2.5k ohm resistor.
|
||
|
|
The precision resistor is used for reference current generation.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
reset-gpios:
|
||
|
|
description: GPIO spec for the RESET pin. If specified, it will be
|
||
|
|
asserted during driver probe.
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
'#address-cells':
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
'#size-cells':
|
||
|
|
const: 0
|
||
|
|
|
||
|
|
channel@0:
|
||
|
|
description: Represents an external channel which are
|
||
|
|
connected to the DAC. Channel 0 can act both as a current
|
||
|
|
source and sink.
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
reg:
|
||
|
|
description: This represents the channel number.
|
||
|
|
const: 0
|
||
|
|
|
||
|
|
adi,range-microamp:
|
||
|
|
description: Output range of the channel.
|
||
|
|
oneOf:
|
||
|
|
- items:
|
||
|
|
- const: 0
|
||
|
|
- const: 300000
|
||
|
|
- items:
|
||
|
|
- const: -60000
|
||
|
|
- const: 0
|
||
|
|
- items:
|
||
|
|
- const: -60000
|
||
|
|
- const: 300000
|
||
|
|
|
||
|
|
channel@1:
|
||
|
|
description: Represents an external channel which are
|
||
|
|
connected to the DAC.
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
reg:
|
||
|
|
description: This represents the channel number.
|
||
|
|
const: 1
|
||
|
|
|
||
|
|
adi,range-microamp:
|
||
|
|
description: Output range of the channel.
|
||
|
|
items:
|
||
|
|
- const: 0
|
||
|
|
- enum: [140000, 250000]
|
||
|
|
|
||
|
|
channel@2:
|
||
|
|
description: Represents an external channel which are
|
||
|
|
connected to the DAC.
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
properties:
|
||
|
|
reg:
|
||
|
|
description: This represents the channel number.
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
adi,range-microamp:
|
||
|
|
description: Output range of the channel.
|
||
|
|
items:
|
||
|
|
- const: 0
|
||
|
|
- enum: [55000, 150000]
|
||
|
|
|
||
|
|
patternProperties:
|
||
|
|
"^channel@([3-5])$":
|
||
|
|
type: object
|
||
|
|
additionalProperties: false
|
||
|
|
description: Represents the external channels which are connected to the DAC.
|
||
|
|
properties:
|
||
|
|
reg:
|
||
|
|
description: This represents the channel number.
|
||
|
|
minimum: 3
|
||
|
|
maximum: 5
|
||
|
|
|
||
|
|
adi,range-microamp:
|
||
|
|
description: Output range of the channel.
|
||
|
|
items:
|
||
|
|
- const: 0
|
||
|
|
- enum: [45000, 100000]
|
||
|
|
|
||
|
|
required:
|
||
|
|
- reg
|
||
|
|
- channel@0
|
||
|
|
- channel@1
|
||
|
|
- channel@2
|
||
|
|
- channel@3
|
||
|
|
- channel@4
|
||
|
|
- channel@5
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
spi {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
ad5770r@0 {
|
||
|
|
compatible = "adi,ad5770r";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
vref-supply = <&vref>;
|
||
|
|
adi,external-resistor;
|
||
|
|
reset-gpios = <&gpio 22 0>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
channel@0 {
|
||
|
|
reg = <0>;
|
||
|
|
adi,range-microamp = <0 300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
channel@1 {
|
||
|
|
reg = <1>;
|
||
|
|
adi,range-microamp = <0 140000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
channel@2 {
|
||
|
|
reg = <2>;
|
||
|
|
adi,range-microamp = <0 55000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
channel@3 {
|
||
|
|
reg = <3>;
|
||
|
|
adi,range-microamp = <0 45000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
channel@4 {
|
||
|
|
reg = <4>;
|
||
|
|
adi,range-microamp = <0 45000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
channel@5 {
|
||
|
|
reg = <5>;
|
||
|
|
adi,range-microamp = <0 45000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
...
|