312 lines
7.7 KiB
C
312 lines
7.7 KiB
C
|
// SPDX-License-Identifier: ISC
|
||
|
|
/*
|
||
|
|
* Copyright (C) 2016 Felix Fietkau <nbd@nbd.name>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include "mt76x2.h"
|
||
|
|
#include "mcu.h"
|
||
|
|
#include "eeprom.h"
|
||
|
|
#include "../mt76x02_phy.h"
|
||
|
|
|
||
|
|
static bool
|
||
|
|
mt76x2_phy_tssi_init_cal(struct mt76x02_dev *dev)
|
||
|
|
{
|
||
|
|
struct ieee80211_channel *chan = dev->mphy.chandef.chan;
|
||
|
|
u32 flag = 0;
|
||
|
|
|
||
|
|
if (!mt76x2_tssi_enabled(dev))
|
||
|
|
return false;
|
||
|
|
|
||
|
|
if (mt76x2_channel_silent(dev))
|
||
|
|
return false;
|
||
|
|
|
||
|
|
if (chan->band == NL80211_BAND_5GHZ)
|
||
|
|
flag |= BIT(0);
|
||
|
|
|
||
|
|
if (mt76x02_ext_pa_enabled(dev, chan->band))
|
||
|
|
flag |= BIT(8);
|
||
|
|
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag);
|
||
|
|
dev->cal.tssi_cal_done = true;
|
||
|
|
return true;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void
|
||
|
|
mt76x2_phy_channel_calibrate(struct mt76x02_dev *dev, bool mac_stopped)
|
||
|
|
{
|
||
|
|
struct ieee80211_channel *chan = dev->mphy.chandef.chan;
|
||
|
|
bool is_5ghz = chan->band == NL80211_BAND_5GHZ;
|
||
|
|
|
||
|
|
if (dev->cal.channel_cal_done)
|
||
|
|
return;
|
||
|
|
|
||
|
|
if (mt76x2_channel_silent(dev))
|
||
|
|
return;
|
||
|
|
|
||
|
|
if (!dev->cal.tssi_cal_done)
|
||
|
|
mt76x2_phy_tssi_init_cal(dev);
|
||
|
|
|
||
|
|
if (!mac_stopped)
|
||
|
|
mt76x2_mac_stop(dev, false);
|
||
|
|
|
||
|
|
if (is_5ghz)
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0);
|
||
|
|
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz);
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz);
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0);
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_TX_SHAPING, 0);
|
||
|
|
|
||
|
|
if (!mac_stopped)
|
||
|
|
mt76x2_mac_resume(dev);
|
||
|
|
|
||
|
|
mt76x2_apply_gain_adj(dev);
|
||
|
|
mt76x02_edcca_init(dev);
|
||
|
|
|
||
|
|
dev->cal.channel_cal_done = true;
|
||
|
|
}
|
||
|
|
|
||
|
|
void mt76x2_phy_set_antenna(struct mt76x02_dev *dev)
|
||
|
|
{
|
||
|
|
u32 val;
|
||
|
|
|
||
|
|
val = mt76_rr(dev, MT_BBP(AGC, 0));
|
||
|
|
val &= ~(BIT(4) | BIT(1));
|
||
|
|
switch (dev->mphy.antenna_mask) {
|
||
|
|
case 1:
|
||
|
|
/* disable mac DAC control */
|
||
|
|
mt76_clear(dev, MT_BBP(IBI, 9), BIT(11));
|
||
|
|
mt76_clear(dev, MT_BBP(TXBE, 5), 3);
|
||
|
|
mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0x3);
|
||
|
|
mt76_rmw_field(dev, MT_BBP(CORE, 32), GENMASK(21, 20), 2);
|
||
|
|
/* disable DAC 1 */
|
||
|
|
mt76_rmw_field(dev, MT_BBP(CORE, 33), GENMASK(12, 9), 4);
|
||
|
|
|
||
|
|
val &= ~(BIT(3) | BIT(0));
|
||
|
|
break;
|
||
|
|
case 2:
|
||
|
|
/* disable mac DAC control */
|
||
|
|
mt76_clear(dev, MT_BBP(IBI, 9), BIT(11));
|
||
|
|
mt76_rmw_field(dev, MT_BBP(TXBE, 5), 3, 1);
|
||
|
|
mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0xc);
|
||
|
|
mt76_rmw_field(dev, MT_BBP(CORE, 32), GENMASK(21, 20), 1);
|
||
|
|
/* disable DAC 0 */
|
||
|
|
mt76_rmw_field(dev, MT_BBP(CORE, 33), GENMASK(12, 9), 1);
|
||
|
|
|
||
|
|
val &= ~BIT(3);
|
||
|
|
val |= BIT(0);
|
||
|
|
break;
|
||
|
|
case 3:
|
||
|
|
default:
|
||
|
|
/* enable mac DAC control */
|
||
|
|
mt76_set(dev, MT_BBP(IBI, 9), BIT(11));
|
||
|
|
mt76_set(dev, MT_BBP(TXBE, 5), 3);
|
||
|
|
mt76_rmw_field(dev, MT_TX_PIN_CFG, MT_TX_PIN_CFG_TXANT, 0xf);
|
||
|
|
mt76_clear(dev, MT_BBP(CORE, 32), GENMASK(21, 20));
|
||
|
|
mt76_clear(dev, MT_BBP(CORE, 33), GENMASK(12, 9));
|
||
|
|
|
||
|
|
val &= ~BIT(0);
|
||
|
|
val |= BIT(3);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
mt76_wr(dev, MT_BBP(AGC, 0), val);
|
||
|
|
}
|
||
|
|
|
||
|
|
int mt76x2_phy_set_channel(struct mt76x02_dev *dev,
|
||
|
|
struct cfg80211_chan_def *chandef)
|
||
|
|
{
|
||
|
|
struct ieee80211_channel *chan = chandef->chan;
|
||
|
|
bool scan = test_bit(MT76_SCANNING, &dev->mphy.state);
|
||
|
|
enum nl80211_band band = chan->band;
|
||
|
|
u8 channel;
|
||
|
|
|
||
|
|
u32 ext_cca_chan[4] = {
|
||
|
|
[0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)),
|
||
|
|
[1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)),
|
||
|
|
[2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)),
|
||
|
|
[3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
|
||
|
|
FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)),
|
||
|
|
};
|
||
|
|
int ch_group_index;
|
||
|
|
u8 bw, bw_index;
|
||
|
|
int freq, freq1;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
dev->cal.channel_cal_done = false;
|
||
|
|
freq = chandef->chan->center_freq;
|
||
|
|
freq1 = chandef->center_freq1;
|
||
|
|
channel = chan->hw_value;
|
||
|
|
|
||
|
|
switch (chandef->width) {
|
||
|
|
case NL80211_CHAN_WIDTH_40:
|
||
|
|
bw = 1;
|
||
|
|
if (freq1 > freq) {
|
||
|
|
bw_index = 1;
|
||
|
|
ch_group_index = 0;
|
||
|
|
} else {
|
||
|
|
bw_index = 3;
|
||
|
|
ch_group_index = 1;
|
||
|
|
}
|
||
|
|
channel += 2 - ch_group_index * 4;
|
||
|
|
break;
|
||
|
|
case NL80211_CHAN_WIDTH_80:
|
||
|
|
ch_group_index = (freq - freq1 + 30) / 20;
|
||
|
|
if (WARN_ON(ch_group_index < 0 || ch_group_index > 3))
|
||
|
|
ch_group_index = 0;
|
||
|
|
bw = 2;
|
||
|
|
bw_index = ch_group_index;
|
||
|
|
channel += 6 - ch_group_index * 4;
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
bw = 0;
|
||
|
|
bw_index = 0;
|
||
|
|
ch_group_index = 0;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
mt76x2_read_rx_gain(dev);
|
||
|
|
mt76x2_phy_set_txpower_regs(dev, band);
|
||
|
|
mt76x2_configure_tx_delay(dev, band, bw);
|
||
|
|
mt76x2_phy_set_txpower(dev);
|
||
|
|
|
||
|
|
mt76x02_phy_set_band(dev, chan->band, ch_group_index & 1);
|
||
|
|
mt76x02_phy_set_bw(dev, chandef->width, ch_group_index);
|
||
|
|
|
||
|
|
mt76_rmw(dev, MT_EXT_CCA_CFG,
|
||
|
|
(MT_EXT_CCA_CFG_CCA0 |
|
||
|
|
MT_EXT_CCA_CFG_CCA1 |
|
||
|
|
MT_EXT_CCA_CFG_CCA2 |
|
||
|
|
MT_EXT_CCA_CFG_CCA3 |
|
||
|
|
MT_EXT_CCA_CFG_CCA_MASK),
|
||
|
|
ext_cca_chan[ch_group_index]);
|
||
|
|
|
||
|
|
ret = mt76x2_mcu_set_channel(dev, channel, bw, bw_index, scan);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
mt76x2_mcu_init_gain(dev, channel, dev->cal.rx.mcu_gain, true);
|
||
|
|
|
||
|
|
mt76x2_phy_set_antenna(dev);
|
||
|
|
|
||
|
|
/* Enable LDPC Rx */
|
||
|
|
if (mt76xx_rev(dev) >= MT76XX_REV_E3)
|
||
|
|
mt76_set(dev, MT_BBP(RXO, 13), BIT(10));
|
||
|
|
|
||
|
|
if (!dev->cal.init_cal_done) {
|
||
|
|
u8 val = mt76x02_eeprom_get(dev, MT_EE_BT_RCAL_RESULT);
|
||
|
|
|
||
|
|
if (val != 0xff)
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel);
|
||
|
|
|
||
|
|
/* Rx LPF calibration */
|
||
|
|
if (!dev->cal.init_cal_done)
|
||
|
|
mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0);
|
||
|
|
|
||
|
|
dev->cal.init_cal_done = true;
|
||
|
|
|
||
|
|
mt76_wr(dev, MT_BBP(AGC, 61), 0xFF64A4E2);
|
||
|
|
mt76_wr(dev, MT_BBP(AGC, 7), 0x08081010);
|
||
|
|
mt76_wr(dev, MT_BBP(AGC, 11), 0x00000404);
|
||
|
|
mt76_wr(dev, MT_BBP(AGC, 2), 0x00007070);
|
||
|
|
mt76_wr(dev, MT_TXOP_CTRL_CFG, 0x04101B3F);
|
||
|
|
|
||
|
|
if (scan)
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
mt76x2_phy_channel_calibrate(dev, true);
|
||
|
|
mt76x02_init_agc_gain(dev);
|
||
|
|
|
||
|
|
/* init default values for temp compensation */
|
||
|
|
if (mt76x2_tssi_enabled(dev)) {
|
||
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
|
||
|
|
0x38);
|
||
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP,
|
||
|
|
0x38);
|
||
|
|
}
|
||
|
|
|
||
|
|
ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
|
||
|
|
MT_CALIBRATE_INTERVAL);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static void
|
||
|
|
mt76x2_phy_temp_compensate(struct mt76x02_dev *dev)
|
||
|
|
{
|
||
|
|
struct mt76x2_temp_comp t;
|
||
|
|
int temp, db_diff;
|
||
|
|
|
||
|
|
if (mt76x2_get_temp_comp(dev, &t))
|
||
|
|
return;
|
||
|
|
|
||
|
|
temp = mt76_get_field(dev, MT_TEMP_SENSOR, MT_TEMP_SENSOR_VAL);
|
||
|
|
temp -= t.temp_25_ref;
|
||
|
|
temp = (temp * 1789) / 1000 + 25;
|
||
|
|
dev->cal.temp = temp;
|
||
|
|
|
||
|
|
if (temp > 25)
|
||
|
|
db_diff = (temp - 25) / t.high_slope;
|
||
|
|
else
|
||
|
|
db_diff = (25 - temp) / t.low_slope;
|
||
|
|
|
||
|
|
db_diff = min(db_diff, t.upper_bound);
|
||
|
|
db_diff = max(db_diff, t.lower_bound);
|
||
|
|
|
||
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
|
||
|
|
db_diff * 2);
|
||
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP,
|
||
|
|
db_diff * 2);
|
||
|
|
}
|
||
|
|
|
||
|
|
void mt76x2_phy_calibrate(struct work_struct *work)
|
||
|
|
{
|
||
|
|
struct mt76x02_dev *dev;
|
||
|
|
|
||
|
|
dev = container_of(work, struct mt76x02_dev, cal_work.work);
|
||
|
|
|
||
|
|
mutex_lock(&dev->mt76.mutex);
|
||
|
|
|
||
|
|
mt76x2_phy_channel_calibrate(dev, false);
|
||
|
|
mt76x2_phy_tssi_compensate(dev);
|
||
|
|
mt76x2_phy_temp_compensate(dev);
|
||
|
|
mt76x2_phy_update_channel_gain(dev);
|
||
|
|
|
||
|
|
mutex_unlock(&dev->mt76.mutex);
|
||
|
|
|
||
|
|
ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
|
||
|
|
MT_CALIBRATE_INTERVAL);
|
||
|
|
}
|
||
|
|
|
||
|
|
int mt76x2_phy_start(struct mt76x02_dev *dev)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
ret = mt76x02_mcu_set_radio_state(dev, true);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
mt76x2_mcu_load_cr(dev, MT_RF_BBP_CR, 0, 0);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|