linuxdebug/drivers/media/platform/ti/davinci/vpif.c

611 lines
14 KiB
C
Raw Normal View History

2024-07-16 15:50:57 +02:00
/*
* vpif - Video Port Interface driver
* VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
* that receiving video byte stream and two channels(2, 3) for video output.
* The hardware supports SDTV, HDTV formats, raw data capture.
* Currently, the driver supports NTSC and PAL standards.
*
* Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed .as is. WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spinlock.h>
#include <linux/v4l2-dv-timings.h>
#include <linux/of_graph.h>
#include "vpif.h"
MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
MODULE_LICENSE("GPL");
#define VPIF_DRIVER_NAME "vpif"
MODULE_ALIAS("platform:" VPIF_DRIVER_NAME);
#define VPIF_CH0_MAX_MODES 22
#define VPIF_CH1_MAX_MODES 2
#define VPIF_CH2_MAX_MODES 15
#define VPIF_CH3_MAX_MODES 2
struct vpif_data {
struct platform_device *capture;
struct platform_device *display;
};
DEFINE_SPINLOCK(vpif_lock);
EXPORT_SYMBOL_GPL(vpif_lock);
void __iomem *vpif_base;
EXPORT_SYMBOL_GPL(vpif_base);
/*
* vpif_ch_params: video standard configuration parameters for vpif
*
* The table must include all presets from supported subdevices.
*/
const struct vpif_channel_config_params vpif_ch_params[] = {
/* HDTV formats */
{
.name = "480p59_94",
.width = 720,
.height = 480,
.frm_fmt = 1,
.ycmux_mode = 0,
.eav2sav = 138-8,
.sav2eav = 720,
.l1 = 1,
.l3 = 43,
.l5 = 523,
.vsize = 525,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
},
{
.name = "576p50",
.width = 720,
.height = 576,
.frm_fmt = 1,
.ycmux_mode = 0,
.eav2sav = 144-8,
.sav2eav = 720,
.l1 = 1,
.l3 = 45,
.l5 = 621,
.vsize = 625,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_720X576P50,
},
{
.name = "720p50",
.width = 1280,
.height = 720,
.frm_fmt = 1,
.ycmux_mode = 0,
.eav2sav = 700-8,
.sav2eav = 1280,
.l1 = 1,
.l3 = 26,
.l5 = 746,
.vsize = 750,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_1280X720P50,
},
{
.name = "720p60",
.width = 1280,
.height = 720,
.frm_fmt = 1,
.ycmux_mode = 0,
.eav2sav = 370 - 8,
.sav2eav = 1280,
.l1 = 1,
.l3 = 26,
.l5 = 746,
.vsize = 750,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_1280X720P60,
},
{
.name = "1080I50",
.width = 1920,
.height = 1080,
.frm_fmt = 0,
.ycmux_mode = 0,
.eav2sav = 720 - 8,
.sav2eav = 1920,
.l1 = 1,
.l3 = 21,
.l5 = 561,
.l7 = 563,
.l9 = 584,
.l11 = 1124,
.vsize = 1125,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_1920X1080I50,
},
{
.name = "1080I60",
.width = 1920,
.height = 1080,
.frm_fmt = 0,
.ycmux_mode = 0,
.eav2sav = 280 - 8,
.sav2eav = 1920,
.l1 = 1,
.l3 = 21,
.l5 = 561,
.l7 = 563,
.l9 = 584,
.l11 = 1124,
.vsize = 1125,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_1920X1080I60,
},
{
.name = "1080p60",
.width = 1920,
.height = 1080,
.frm_fmt = 1,
.ycmux_mode = 0,
.eav2sav = 280 - 8,
.sav2eav = 1920,
.l1 = 1,
.l3 = 42,
.l5 = 1122,
.vsize = 1125,
.capture_format = 0,
.vbi_supported = 0,
.hd_sd = 1,
.dv_timings = V4L2_DV_BT_CEA_1920X1080P60,
},
/* SDTV formats */
{
.name = "NTSC_M",
.width = 720,
.height = 480,
.frm_fmt = 0,
.ycmux_mode = 1,
.eav2sav = 268,
.sav2eav = 1440,
.l1 = 1,
.l3 = 23,
.l5 = 263,
.l7 = 266,
.l9 = 286,
.l11 = 525,
.vsize = 525,
.capture_format = 0,
.vbi_supported = 1,
.hd_sd = 0,
.stdid = V4L2_STD_525_60,
},
{
.name = "PAL_BDGHIK",
.width = 720,
.height = 576,
.frm_fmt = 0,
.ycmux_mode = 1,
.eav2sav = 280,
.sav2eav = 1440,
.l1 = 1,
.l3 = 23,
.l5 = 311,
.l7 = 313,
.l9 = 336,
.l11 = 624,
.vsize = 625,
.capture_format = 0,
.vbi_supported = 1,
.hd_sd = 0,
.stdid = V4L2_STD_625_50,
},
};
EXPORT_SYMBOL_GPL(vpif_ch_params);
const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params);
EXPORT_SYMBOL_GPL(vpif_ch_params_count);
static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
{
if (val)
vpif_set_bit(reg, bit);
else
vpif_clr_bit(reg, bit);
}
/* This structure is used to keep track of VPIF size register's offsets */
struct vpif_registers {
u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
u32 vanc1_size, width_mask, len_mask;
u8 max_modes;
};
static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
/* Channel0 */
{
VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
VPIF_CH0_MAX_MODES,
},
/* Channel1 */
{
VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
VPIF_CH1_MAX_MODES,
},
/* Channel2 */
{
VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
VPIF_CH2_MAX_MODES
},
/* Channel3 */
{
VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
VPIF_CH3_MAX_MODES
},
};
/* vpif_set_mode_info:
* This function is used to set horizontal and vertical config parameters
* As per the standard in the channel, configure the values of L1, L3,
* L5, L7 L9, L11 in VPIF Register , also write width and height
*/
static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
u8 channel_id, u8 config_channel_id)
{
u32 value;
value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
regw(value, vpifregs[channel_id].h_cfg);
value = (config->l1 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l3 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_00);
value = (config->l5 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l7 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_01);
value = (config->l9 & vpifregs[config_channel_id].len_mask);
value <<= VPIF_CH_LEN_SHIFT;
value |= (config->l11 & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg_02);
value = (config->vsize & vpifregs[config_channel_id].len_mask);
regw(value, vpifregs[channel_id].v_cfg);
}
/* config_vpif_params
* Function to set the parameters of a channel
* Mainly modifies the channel ciontrol register
* It sets frame format, yc mux mode
*/
static void config_vpif_params(struct vpif_params *vpifparams,
u8 channel_id, u8 found)
{
const struct vpif_channel_config_params *config = &vpifparams->std_info;
u32 value, ch_nip, reg;
u8 start, end;
int i;
start = channel_id;
end = channel_id + found;
for (i = start; i < end; i++) {
reg = vpifregs[i].ch_ctrl;
if (channel_id < 2)
ch_nip = VPIF_CAPTURE_CH_NIP;
else
ch_nip = VPIF_DISPLAY_CH_NIP;
vpif_wr_bit(reg, ch_nip, config->frm_fmt);
vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
vpifparams->video_params.storage_mode);
/* Set raster scanning SDR Format */
vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
if (channel_id > 1) /* Set the Pixel enable bit */
vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
else if (config->capture_format) {
/* Set the polarity of various pins */
vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
vpifparams->iface.fid_pol);
vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
vpifparams->iface.vd_pol);
vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
vpifparams->iface.hd_pol);
value = regr(reg);
/* Set data width */
value &= ~(0x3u <<
VPIF_CH_DATA_WIDTH_BIT);
value |= ((vpifparams->params.data_sz) <<
VPIF_CH_DATA_WIDTH_BIT);
regw(value, reg);
}
/* Write the pitch in the driver */
regw((vpifparams->video_params.hpitch),
vpifregs[i].line_offset);
}
}
/* vpif_set_video_params
* This function is used to set video parameters in VPIF register
*/
int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
{
const struct vpif_channel_config_params *config = &vpifparams->std_info;
int found = 1;
vpif_set_mode_info(config, channel_id, channel_id);
if (!config->ycmux_mode) {
/* YC are on separate channels (HDTV formats) */
vpif_set_mode_info(config, channel_id + 1, channel_id);
found = 2;
}
config_vpif_params(vpifparams, channel_id, found);
regw(0x80, VPIF_REQ_SIZE);
regw(0x01, VPIF_EMULATION_CTRL);
return found;
}
EXPORT_SYMBOL(vpif_set_video_params);
void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
u8 channel_id)
{
u32 value;
value = 0x3F8 & (vbiparams->hstart0);
value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
regw(value, vpifregs[channel_id].vanc0_strt);
value = 0x3F8 & (vbiparams->hstart1);
value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
regw(value, vpifregs[channel_id].vanc1_strt);
value = 0x3F8 & (vbiparams->hsize0);
value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
regw(value, vpifregs[channel_id].vanc0_size);
value = 0x3F8 & (vbiparams->hsize1);
value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
regw(value, vpifregs[channel_id].vanc1_size);
}
EXPORT_SYMBOL(vpif_set_vbi_display_params);
int vpif_channel_getfid(u8 channel_id)
{
return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
>> VPIF_CH_FID_SHIFT;
}
EXPORT_SYMBOL(vpif_channel_getfid);
static void vpif_pdev_release(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
kfree(pdev);
}
static int vpif_probe(struct platform_device *pdev)
{
static struct resource res_irq;
struct platform_device *pdev_capture, *pdev_display;
struct device_node *endpoint = NULL;
struct vpif_data *data;
int ret;
int irq;
vpif_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(vpif_base))
return PTR_ERR(vpif_base);
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
platform_set_drvdata(pdev, data);
pm_runtime_enable(&pdev->dev);
pm_runtime_get(&pdev->dev);
/*
* If VPIF Node has endpoints, assume "new" DT support,
* where capture and display drivers don't have DT nodes
* so their devices need to be registered manually here
* for their legacy platform_drivers to work.
*/
endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
endpoint);
if (!endpoint)
return 0;
of_node_put(endpoint);
/*
* For DT platforms, manually create platform_devices for
* capture/display drivers.
*/
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
goto err_put_rpm;
}
res_irq = (struct resource)DEFINE_RES_IRQ_NAMED(irq, of_node_full_name(pdev->dev.of_node));
res_irq.flags |= irq_get_trigger_type(irq);
pdev_capture = kzalloc(sizeof(*pdev_capture), GFP_KERNEL);
if (!pdev_capture) {
ret = -ENOMEM;
goto err_put_rpm;
}
pdev_capture->name = "vpif_capture";
pdev_capture->id = -1;
pdev_capture->resource = &res_irq;
pdev_capture->num_resources = 1;
pdev_capture->dev.dma_mask = pdev->dev.dma_mask;
pdev_capture->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
pdev_capture->dev.parent = &pdev->dev;
pdev_capture->dev.release = vpif_pdev_release;
ret = platform_device_register(pdev_capture);
if (ret)
goto err_put_pdev_capture;
pdev_display = kzalloc(sizeof(*pdev_display), GFP_KERNEL);
if (!pdev_display) {
ret = -ENOMEM;
goto err_put_pdev_capture;
}
pdev_display->name = "vpif_display";
pdev_display->id = -1;
pdev_display->resource = &res_irq;
pdev_display->num_resources = 1;
pdev_display->dev.dma_mask = pdev->dev.dma_mask;
pdev_display->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
pdev_display->dev.parent = &pdev->dev;
pdev_display->dev.release = vpif_pdev_release;
ret = platform_device_register(pdev_display);
if (ret)
goto err_put_pdev_display;
data->capture = pdev_capture;
data->display = pdev_display;
return 0;
err_put_pdev_display:
platform_device_put(pdev_display);
err_put_pdev_capture:
platform_device_put(pdev_capture);
err_put_rpm:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
kfree(data);
return ret;
}
static int vpif_remove(struct platform_device *pdev)
{
struct vpif_data *data = platform_get_drvdata(pdev);
if (data->capture)
platform_device_unregister(data->capture);
if (data->display)
platform_device_unregister(data->display);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
kfree(data);
return 0;
}
#ifdef CONFIG_PM
static int vpif_suspend(struct device *dev)
{
pm_runtime_put(dev);
return 0;
}
static int vpif_resume(struct device *dev)
{
pm_runtime_get(dev);
return 0;
}
static const struct dev_pm_ops vpif_pm = {
.suspend = vpif_suspend,
.resume = vpif_resume,
};
#define vpif_pm_ops (&vpif_pm)
#else
#define vpif_pm_ops NULL
#endif
#if IS_ENABLED(CONFIG_OF)
static const struct of_device_id vpif_of_match[] = {
{ .compatible = "ti,da850-vpif", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, vpif_of_match);
#endif
static struct platform_driver vpif_driver = {
.driver = {
.of_match_table = of_match_ptr(vpif_of_match),
.name = VPIF_DRIVER_NAME,
.pm = vpif_pm_ops,
},
.remove = vpif_remove,
.probe = vpif_probe,
};
static void vpif_exit(void)
{
platform_driver_unregister(&vpif_driver);
}
static int __init vpif_init(void)
{
return platform_driver_register(&vpif_driver);
}
subsys_initcall(vpif_init);
module_exit(vpif_exit);