138 lines
4.1 KiB
YAML
138 lines
4.1 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Ricard Wanderlof <ricardw@axis.com>
|
||
|
|
|
||
|
|
description: |
|
||
|
|
Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC
|
||
|
|
https://www.ti.com/product/TLV320ADC3001
|
||
|
|
https://www.ti.com/product/TLV320ADC3101
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- ti,tlv320adc3001
|
||
|
|
- ti,tlv320adc3101
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
description: I2C address
|
||
|
|
|
||
|
|
'#sound-dai-cells':
|
||
|
|
const: 0
|
||
|
|
|
||
|
|
'#gpio-cells':
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
reset-gpios:
|
||
|
|
maxItems: 1
|
||
|
|
description: GPIO pin used for codec reset (RESET pin)
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
description: Master clock (MCLK)
|
||
|
|
|
||
|
|
ti,dmdin-gpio1:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum:
|
||
|
|
- 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used
|
||
|
|
- 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions
|
||
|
|
- 2 # ADC3XXX_GPIO_GPI - General purpose input
|
||
|
|
- 3 # ADC3XXX_GPIO_GPO - General purpose output
|
||
|
|
- 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg
|
||
|
|
- 5 # ADC3XXX_GPIO_INT1 - INT1 output
|
||
|
|
- 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
|
||
|
|
- 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
|
||
|
|
default: 0
|
||
|
|
description: |
|
||
|
|
Configuration for DMDIN/GPIO1 pin.
|
||
|
|
|
||
|
|
When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
|
||
|
|
ALSA control "GPIOx Output" to appear, as a switch control.
|
||
|
|
|
||
|
|
ti,dmclk-gpio2:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum:
|
||
|
|
- 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used
|
||
|
|
- 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions
|
||
|
|
- 2 # ADC3XXX_GPIO_GPI - General purpose input
|
||
|
|
- 3 # ADC3XXX_GPIO_GPO - General purpose output
|
||
|
|
- 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg
|
||
|
|
- 5 # ADC3XXX_GPIO_INT1 - INT1 output
|
||
|
|
- 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK
|
||
|
|
- 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK
|
||
|
|
default: 0
|
||
|
|
description: |
|
||
|
|
Configuration for DMCLK/GPIO2 pin.
|
||
|
|
|
||
|
|
When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
|
||
|
|
ALSA control "GPIOx Output" to appear, as a switch control.
|
||
|
|
|
||
|
|
Note that there is currently no support for reading the GPIO pins as
|
||
|
|
inputs.
|
||
|
|
|
||
|
|
ti,micbias1-vg:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum:
|
||
|
|
- 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down
|
||
|
|
- 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V
|
||
|
|
- 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V
|
||
|
|
- 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply
|
||
|
|
default: 0
|
||
|
|
description: |
|
||
|
|
Mic bias voltage output on MICBIAS1 pin
|
||
|
|
|
||
|
|
ti,micbias2-vg:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
enum:
|
||
|
|
- 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down
|
||
|
|
- 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V
|
||
|
|
- 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V
|
||
|
|
- 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply
|
||
|
|
default: 0
|
||
|
|
description: |
|
||
|
|
Mic bias voltage output on MICBIAS2 pin
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- clocks
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/sound/tlv320adc3xxx.h>
|
||
|
|
|
||
|
|
i2c {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
tlv320adc3101: audio-codec@18 {
|
||
|
|
compatible = "ti,tlv320adc3101";
|
||
|
|
reg = <0x18>;
|
||
|
|
reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>;
|
||
|
|
clocks = <&audio_mclk>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>;
|
||
|
|
ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
audio_mclk: clock {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
clock-frequency = <24576000>;
|
||
|
|
};
|
||
|
|
...
|