87 lines
2.0 KiB
YAML
87 lines
2.0 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||
|
|
|
||
|
|
description:
|
||
|
|
This defines the common properties used to describe all Qualcomm Top Level
|
||
|
|
Mode Multiplexer bindings and pinconf/pinmux states for these.
|
||
|
|
|
||
|
|
properties:
|
||
|
|
interrupts:
|
||
|
|
description:
|
||
|
|
Specifies the TLMM summary IRQ
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupt-controller: true
|
||
|
|
|
||
|
|
'#interrupt-cells':
|
||
|
|
description:
|
||
|
|
Specifies the PIN numbers and Flags, as defined in defined in
|
||
|
|
include/dt-bindings/interrupt-controller/irq.h
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-controller: true
|
||
|
|
|
||
|
|
'#gpio-cells':
|
||
|
|
description:
|
||
|
|
Specifying the pin number and flags, as defined in
|
||
|
|
include/dt-bindings/gpio/gpio.h
|
||
|
|
const: 2
|
||
|
|
|
||
|
|
gpio-ranges:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
wakeup-parent:
|
||
|
|
description:
|
||
|
|
Specifying the interrupt-controller used to wake up the system when the
|
||
|
|
TLMM block has been powered down.
|
||
|
|
|
||
|
|
gpio-reserved-ranges:
|
||
|
|
description:
|
||
|
|
Pins can be reserved for trusted applications and thereby unaccessible
|
||
|
|
from the OS. This property can be used to mark the pins which resources
|
||
|
|
should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
|
||
|
|
information.
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: "pinctrl.yaml#"
|
||
|
|
|
||
|
|
required:
|
||
|
|
- interrupts
|
||
|
|
- interrupt-controller
|
||
|
|
- '#interrupt-cells'
|
||
|
|
- gpio-controller
|
||
|
|
- '#gpio-cells'
|
||
|
|
- gpio-ranges
|
||
|
|
|
||
|
|
additionalProperties: true
|
||
|
|
|
||
|
|
$defs:
|
||
|
|
qcom-tlmm-state:
|
||
|
|
allOf:
|
||
|
|
- $ref: pincfg-node.yaml#
|
||
|
|
- $ref: pinmux-node.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
drive-strength:
|
||
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||
|
|
description:
|
||
|
|
Selects the drive strength for the specified pins, in mA.
|
||
|
|
|
||
|
|
bias-pull-down: true
|
||
|
|
bias-pull-up: true
|
||
|
|
bias-disable: true
|
||
|
|
input-enable: true
|
||
|
|
output-high: true
|
||
|
|
output-low: true
|
||
|
|
|
||
|
|
additionalProperties: true
|
||
|
|
...
|