871 lines
24 KiB
C
871 lines
24 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
// Copyright (C) 2018 Microchip Technology
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/mii.h>
|
||
|
#include <linux/phy.h>
|
||
|
#include <linux/ethtool.h>
|
||
|
#include <linux/ethtool_netlink.h>
|
||
|
#include <linux/bitfield.h>
|
||
|
|
||
|
#define PHY_ID_LAN87XX 0x0007c150
|
||
|
#define PHY_ID_LAN937X 0x0007c180
|
||
|
|
||
|
/* External Register Control Register */
|
||
|
#define LAN87XX_EXT_REG_CTL (0x14)
|
||
|
#define LAN87XX_EXT_REG_CTL_RD_CTL (0x1000)
|
||
|
#define LAN87XX_EXT_REG_CTL_WR_CTL (0x0800)
|
||
|
#define LAN87XX_REG_BANK_SEL_MASK GENMASK(10, 8)
|
||
|
#define LAN87XX_REG_ADDR_MASK GENMASK(7, 0)
|
||
|
|
||
|
/* External Register Read Data Register */
|
||
|
#define LAN87XX_EXT_REG_RD_DATA (0x15)
|
||
|
|
||
|
/* External Register Write Data Register */
|
||
|
#define LAN87XX_EXT_REG_WR_DATA (0x16)
|
||
|
|
||
|
/* Interrupt Source Register */
|
||
|
#define LAN87XX_INTERRUPT_SOURCE (0x18)
|
||
|
#define LAN87XX_INTERRUPT_SOURCE_2 (0x08)
|
||
|
|
||
|
/* Interrupt Mask Register */
|
||
|
#define LAN87XX_INTERRUPT_MASK (0x19)
|
||
|
#define LAN87XX_MASK_LINK_UP (0x0004)
|
||
|
#define LAN87XX_MASK_LINK_DOWN (0x0002)
|
||
|
|
||
|
#define LAN87XX_INTERRUPT_MASK_2 (0x09)
|
||
|
#define LAN87XX_MASK_COMM_RDY BIT(10)
|
||
|
|
||
|
/* MISC Control 1 Register */
|
||
|
#define LAN87XX_CTRL_1 (0x11)
|
||
|
#define LAN87XX_MASK_RGMII_TXC_DLY_EN (0x4000)
|
||
|
#define LAN87XX_MASK_RGMII_RXC_DLY_EN (0x2000)
|
||
|
|
||
|
/* phyaccess nested types */
|
||
|
#define PHYACC_ATTR_MODE_READ 0
|
||
|
#define PHYACC_ATTR_MODE_WRITE 1
|
||
|
#define PHYACC_ATTR_MODE_MODIFY 2
|
||
|
#define PHYACC_ATTR_MODE_POLL 3
|
||
|
|
||
|
#define PHYACC_ATTR_BANK_SMI 0
|
||
|
#define PHYACC_ATTR_BANK_MISC 1
|
||
|
#define PHYACC_ATTR_BANK_PCS 2
|
||
|
#define PHYACC_ATTR_BANK_AFE 3
|
||
|
#define PHYACC_ATTR_BANK_DSP 4
|
||
|
#define PHYACC_ATTR_BANK_MAX 7
|
||
|
|
||
|
/* measurement defines */
|
||
|
#define LAN87XX_CABLE_TEST_OK 0
|
||
|
#define LAN87XX_CABLE_TEST_OPEN 1
|
||
|
#define LAN87XX_CABLE_TEST_SAME_SHORT 2
|
||
|
|
||
|
/* T1 Registers */
|
||
|
#define T1_AFE_PORT_CFG1_REG 0x0B
|
||
|
#define T1_POWER_DOWN_CONTROL_REG 0x1A
|
||
|
#define T1_SLV_FD_MULT_CFG_REG 0x18
|
||
|
#define T1_CDR_CFG_PRE_LOCK_REG 0x05
|
||
|
#define T1_CDR_CFG_POST_LOCK_REG 0x06
|
||
|
#define T1_LCK_STG2_MUFACT_CFG_REG 0x1A
|
||
|
#define T1_LCK_STG3_MUFACT_CFG_REG 0x1B
|
||
|
#define T1_POST_LCK_MUFACT_CFG_REG 0x1C
|
||
|
#define T1_TX_RX_FIFO_CFG_REG 0x02
|
||
|
#define T1_TX_LPF_FIR_CFG_REG 0x55
|
||
|
#define T1_COEF_CLK_PWR_DN_CFG 0x04
|
||
|
#define T1_COEF_RW_CTL_CFG 0x0D
|
||
|
#define T1_SQI_CONFIG_REG 0x2E
|
||
|
#define T1_SQI_CONFIG2_REG 0x4A
|
||
|
#define T1_DCQ_SQI_REG 0xC3
|
||
|
#define T1_DCQ_SQI_MSK GENMASK(3, 1)
|
||
|
#define T1_MDIO_CONTROL2_REG 0x10
|
||
|
#define T1_INTERRUPT_SOURCE_REG 0x18
|
||
|
#define T1_INTERRUPT2_SOURCE_REG 0x08
|
||
|
#define T1_EQ_FD_STG1_FRZ_CFG 0x69
|
||
|
#define T1_EQ_FD_STG2_FRZ_CFG 0x6A
|
||
|
#define T1_EQ_FD_STG3_FRZ_CFG 0x6B
|
||
|
#define T1_EQ_FD_STG4_FRZ_CFG 0x6C
|
||
|
#define T1_EQ_WT_FD_LCK_FRZ_CFG 0x6D
|
||
|
#define T1_PST_EQ_LCK_STG1_FRZ_CFG 0x6E
|
||
|
|
||
|
#define T1_MODE_STAT_REG 0x11
|
||
|
#define T1_LINK_UP_MSK BIT(0)
|
||
|
|
||
|
/* SQI defines */
|
||
|
#define LAN87XX_MAX_SQI 0x07
|
||
|
|
||
|
#define DRIVER_AUTHOR "Nisar Sayed <nisar.sayed@microchip.com>"
|
||
|
#define DRIVER_DESC "Microchip LAN87XX/LAN937x T1 PHY driver"
|
||
|
|
||
|
struct access_ereg_val {
|
||
|
u8 mode;
|
||
|
u8 bank;
|
||
|
u8 offset;
|
||
|
u16 val;
|
||
|
u16 mask;
|
||
|
};
|
||
|
|
||
|
static int lan937x_dsp_workaround(struct phy_device *phydev, u16 ereg, u8 bank)
|
||
|
{
|
||
|
u8 prev_bank;
|
||
|
int rc = 0;
|
||
|
u16 val;
|
||
|
|
||
|
mutex_lock(&phydev->lock);
|
||
|
/* Read previous selected bank */
|
||
|
rc = phy_read(phydev, LAN87XX_EXT_REG_CTL);
|
||
|
if (rc < 0)
|
||
|
goto out_unlock;
|
||
|
|
||
|
/* store the prev_bank */
|
||
|
prev_bank = FIELD_GET(LAN87XX_REG_BANK_SEL_MASK, rc);
|
||
|
|
||
|
if (bank != prev_bank && bank == PHYACC_ATTR_BANK_DSP) {
|
||
|
val = ereg & ~LAN87XX_REG_ADDR_MASK;
|
||
|
|
||
|
val &= ~LAN87XX_EXT_REG_CTL_WR_CTL;
|
||
|
val |= LAN87XX_EXT_REG_CTL_RD_CTL;
|
||
|
|
||
|
/* access twice for DSP bank change,dummy access */
|
||
|
rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, val);
|
||
|
}
|
||
|
|
||
|
out_unlock:
|
||
|
mutex_unlock(&phydev->lock);
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int access_ereg(struct phy_device *phydev, u8 mode, u8 bank,
|
||
|
u8 offset, u16 val)
|
||
|
{
|
||
|
u16 ereg = 0;
|
||
|
int rc = 0;
|
||
|
|
||
|
if (mode > PHYACC_ATTR_MODE_WRITE || bank > PHYACC_ATTR_BANK_MAX)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (bank == PHYACC_ATTR_BANK_SMI) {
|
||
|
if (mode == PHYACC_ATTR_MODE_WRITE)
|
||
|
rc = phy_write(phydev, offset, val);
|
||
|
else
|
||
|
rc = phy_read(phydev, offset);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
if (mode == PHYACC_ATTR_MODE_WRITE) {
|
||
|
ereg = LAN87XX_EXT_REG_CTL_WR_CTL;
|
||
|
rc = phy_write(phydev, LAN87XX_EXT_REG_WR_DATA, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
} else {
|
||
|
ereg = LAN87XX_EXT_REG_CTL_RD_CTL;
|
||
|
}
|
||
|
|
||
|
ereg |= (bank << 8) | offset;
|
||
|
|
||
|
/* DSP bank access workaround for lan937x */
|
||
|
if (phydev->phy_id == PHY_ID_LAN937X) {
|
||
|
rc = lan937x_dsp_workaround(phydev, ereg, bank);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
rc = phy_write(phydev, LAN87XX_EXT_REG_CTL, ereg);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
if (mode == PHYACC_ATTR_MODE_READ)
|
||
|
rc = phy_read(phydev, LAN87XX_EXT_REG_RD_DATA);
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int access_ereg_modify_changed(struct phy_device *phydev,
|
||
|
u8 bank, u8 offset, u16 val, u16 mask)
|
||
|
{
|
||
|
int new = 0, rc = 0;
|
||
|
|
||
|
if (bank > PHYACC_ATTR_BANK_MAX)
|
||
|
return -EINVAL;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, bank, offset, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
new = val | (rc & (mask ^ 0xFFFF));
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE, bank, offset, new);
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int access_smi_poll_timeout(struct phy_device *phydev,
|
||
|
u8 offset, u16 mask, u16 clr)
|
||
|
{
|
||
|
int val;
|
||
|
|
||
|
return phy_read_poll_timeout(phydev, offset, val, (val & mask) == clr,
|
||
|
150, 30000, true);
|
||
|
}
|
||
|
|
||
|
static int lan87xx_config_rgmii_delay(struct phy_device *phydev)
|
||
|
{
|
||
|
int rc;
|
||
|
|
||
|
if (!phy_interface_is_rgmii(phydev))
|
||
|
return 0;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_MISC, LAN87XX_CTRL_1, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
switch (phydev->interface) {
|
||
|
case PHY_INTERFACE_MODE_RGMII:
|
||
|
rc &= ~LAN87XX_MASK_RGMII_TXC_DLY_EN;
|
||
|
rc &= ~LAN87XX_MASK_RGMII_RXC_DLY_EN;
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
||
|
rc |= LAN87XX_MASK_RGMII_TXC_DLY_EN;
|
||
|
rc |= LAN87XX_MASK_RGMII_RXC_DLY_EN;
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
||
|
rc &= ~LAN87XX_MASK_RGMII_TXC_DLY_EN;
|
||
|
rc |= LAN87XX_MASK_RGMII_RXC_DLY_EN;
|
||
|
break;
|
||
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
||
|
rc |= LAN87XX_MASK_RGMII_TXC_DLY_EN;
|
||
|
rc &= ~LAN87XX_MASK_RGMII_RXC_DLY_EN;
|
||
|
break;
|
||
|
default:
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
return access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_MISC, LAN87XX_CTRL_1, rc);
|
||
|
}
|
||
|
|
||
|
static int lan87xx_phy_init(struct phy_device *phydev)
|
||
|
{
|
||
|
static const struct access_ereg_val init[] = {
|
||
|
/* TXPD/TXAMP6 Configs */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_AFE,
|
||
|
T1_AFE_PORT_CFG1_REG, 0x002D, 0 },
|
||
|
/* HW_Init Hi and Force_ED */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_POWER_DOWN_CONTROL_REG, 0x0308, 0 },
|
||
|
/* Equalizer Full Duplex Freeze - T1 Slave */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_EQ_FD_STG1_FRZ_CFG, 0x0002, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_EQ_FD_STG2_FRZ_CFG, 0x0002, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_EQ_FD_STG3_FRZ_CFG, 0x0002, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_EQ_FD_STG4_FRZ_CFG, 0x0002, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_EQ_WT_FD_LCK_FRZ_CFG, 0x0002, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_PST_EQ_LCK_STG1_FRZ_CFG, 0x0002, 0 },
|
||
|
/* Slave Full Duplex Multi Configs */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_SLV_FD_MULT_CFG_REG, 0x0D53, 0 },
|
||
|
/* CDR Pre and Post Lock Configs */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_CDR_CFG_PRE_LOCK_REG, 0x0AB2, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_CDR_CFG_POST_LOCK_REG, 0x0AB3, 0 },
|
||
|
/* Lock Stage 2-3 Multi Factor Config */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_LCK_STG2_MUFACT_CFG_REG, 0x0AEA, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_LCK_STG3_MUFACT_CFG_REG, 0x0AEB, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_POST_LCK_MUFACT_CFG_REG, 0x0AEB, 0 },
|
||
|
/* Pointer delay */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_RX_FIFO_CFG_REG, 0x1C00, 0 },
|
||
|
/* Tx iir edits */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1000, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1861, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1061, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1922, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1122, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1983, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1183, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1944, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1144, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x18c5, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x10c5, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1846, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1046, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1807, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1007, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1808, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1008, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1809, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1009, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180A, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100A, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180B, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100B, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180C, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100C, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180D, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100D, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180E, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100E, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x180F, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x100F, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1810, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1010, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1811, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1011, 0 },
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_TX_LPF_FIR_CFG_REG, 0x1000, 0 },
|
||
|
/* Setup SQI measurement */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_COEF_CLK_PWR_DN_CFG, 0x16d6, 0 },
|
||
|
/* SQI enable */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_SQI_CONFIG_REG, 0x9572, 0 },
|
||
|
/* SQI select mode 5 */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_SQI_CONFIG2_REG, 0x0001, 0 },
|
||
|
/* Throws the first SQI reading */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_COEF_RW_CTL_CFG, 0x0301, 0 },
|
||
|
{ PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_DSP,
|
||
|
T1_DCQ_SQI_REG, 0, 0 },
|
||
|
/* Flag LPS and WUR as idle errors */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_MDIO_CONTROL2_REG, 0x0014, 0 },
|
||
|
/* HW_Init toggle, undo force ED, TXPD off */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_POWER_DOWN_CONTROL_REG, 0x0200, 0 },
|
||
|
/* Reset PCS to trigger hardware initialization */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_MDIO_CONTROL2_REG, 0x0094, 0 },
|
||
|
/* Poll till Hardware is initialized */
|
||
|
{ PHYACC_ATTR_MODE_POLL, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_MDIO_CONTROL2_REG, 0x0080, 0 },
|
||
|
/* Tx AMP - 0x06 */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_AFE,
|
||
|
T1_AFE_PORT_CFG1_REG, 0x000C, 0 },
|
||
|
/* Read INTERRUPT_SOURCE Register */
|
||
|
{ PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_INTERRUPT_SOURCE_REG, 0, 0 },
|
||
|
/* Read INTERRUPT_SOURCE Register */
|
||
|
{ PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_MISC,
|
||
|
T1_INTERRUPT2_SOURCE_REG, 0, 0 },
|
||
|
/* HW_Init Hi */
|
||
|
{ PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_SMI,
|
||
|
T1_POWER_DOWN_CONTROL_REG, 0x0300, 0 },
|
||
|
};
|
||
|
int rc, i;
|
||
|
|
||
|
/* phy Soft reset */
|
||
|
rc = genphy_soft_reset(phydev);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
/* PHY Initialization */
|
||
|
for (i = 0; i < ARRAY_SIZE(init); i++) {
|
||
|
if (init[i].mode == PHYACC_ATTR_MODE_POLL &&
|
||
|
init[i].bank == PHYACC_ATTR_BANK_SMI) {
|
||
|
rc = access_smi_poll_timeout(phydev,
|
||
|
init[i].offset,
|
||
|
init[i].val,
|
||
|
init[i].mask);
|
||
|
} else {
|
||
|
rc = access_ereg(phydev, init[i].mode, init[i].bank,
|
||
|
init[i].offset, init[i].val);
|
||
|
}
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
return lan87xx_config_rgmii_delay(phydev);
|
||
|
}
|
||
|
|
||
|
static int lan87xx_phy_config_intr(struct phy_device *phydev)
|
||
|
{
|
||
|
int rc, val = 0;
|
||
|
|
||
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
|
||
|
/* clear all interrupt */
|
||
|
rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_MASK_2, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_SOURCE_2, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
/* enable link down and comm ready interrupt */
|
||
|
val = LAN87XX_MASK_LINK_DOWN;
|
||
|
rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
val = LAN87XX_MASK_COMM_RDY;
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_MASK_2, val);
|
||
|
} else {
|
||
|
rc = phy_write(phydev, LAN87XX_INTERRUPT_MASK, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_MASK_2, val);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_SOURCE_2, 0);
|
||
|
}
|
||
|
|
||
|
return rc < 0 ? rc : 0;
|
||
|
}
|
||
|
|
||
|
static irqreturn_t lan87xx_handle_interrupt(struct phy_device *phydev)
|
||
|
{
|
||
|
int irq_status;
|
||
|
|
||
|
irq_status = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_MISC,
|
||
|
LAN87XX_INTERRUPT_SOURCE_2, 0);
|
||
|
if (irq_status < 0) {
|
||
|
phy_error(phydev);
|
||
|
return IRQ_NONE;
|
||
|
}
|
||
|
|
||
|
irq_status = phy_read(phydev, LAN87XX_INTERRUPT_SOURCE);
|
||
|
if (irq_status < 0) {
|
||
|
phy_error(phydev);
|
||
|
return IRQ_NONE;
|
||
|
}
|
||
|
|
||
|
if (irq_status == 0)
|
||
|
return IRQ_NONE;
|
||
|
|
||
|
phy_trigger_machine(phydev);
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_config_init(struct phy_device *phydev)
|
||
|
{
|
||
|
int rc = lan87xx_phy_init(phydev);
|
||
|
|
||
|
return rc < 0 ? rc : 0;
|
||
|
}
|
||
|
|
||
|
static int microchip_cable_test_start_common(struct phy_device *phydev)
|
||
|
{
|
||
|
int bmcr, bmsr, ret;
|
||
|
|
||
|
/* If auto-negotiation is enabled, but not complete, the cable
|
||
|
* test never completes. So disable auto-neg.
|
||
|
*/
|
||
|
bmcr = phy_read(phydev, MII_BMCR);
|
||
|
if (bmcr < 0)
|
||
|
return bmcr;
|
||
|
|
||
|
bmsr = phy_read(phydev, MII_BMSR);
|
||
|
|
||
|
if (bmsr < 0)
|
||
|
return bmsr;
|
||
|
|
||
|
if (bmcr & BMCR_ANENABLE) {
|
||
|
ret = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
ret = genphy_soft_reset(phydev);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* If the link is up, allow it some time to go down */
|
||
|
if (bmsr & BMSR_LSTATUS)
|
||
|
msleep(1500);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_cable_test_start(struct phy_device *phydev)
|
||
|
{
|
||
|
static const struct access_ereg_val cable_test[] = {
|
||
|
/* min wait */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 93,
|
||
|
0, 0},
|
||
|
/* max wait */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 94,
|
||
|
10, 0},
|
||
|
/* pulse cycle */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 95,
|
||
|
90, 0},
|
||
|
/* cable diag thresh */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 92,
|
||
|
60, 0},
|
||
|
/* max gain */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 79,
|
||
|
31, 0},
|
||
|
/* clock align for each iteration */
|
||
|
{PHYACC_ATTR_MODE_MODIFY, PHYACC_ATTR_BANK_DSP, 55,
|
||
|
0, 0x0038},
|
||
|
/* max cycle wait config */
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 94,
|
||
|
70, 0},
|
||
|
/* start cable diag*/
|
||
|
{PHYACC_ATTR_MODE_WRITE, PHYACC_ATTR_BANK_DSP, 90,
|
||
|
1, 0},
|
||
|
};
|
||
|
int rc, i;
|
||
|
|
||
|
rc = microchip_cable_test_start_common(phydev);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
/* start cable diag */
|
||
|
/* check if part is alive - if not, return diagnostic error */
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI,
|
||
|
0x00, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
/* master/slave specific configs */
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_SMI,
|
||
|
0x0A, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
if ((rc & 0x4000) != 0x4000) {
|
||
|
/* DUT is Slave */
|
||
|
rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_AFE,
|
||
|
0x0E, 0x5, 0x7);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
|
||
|
0x1A, 0x8, 0x8);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
} else {
|
||
|
/* DUT is Master */
|
||
|
rc = access_ereg_modify_changed(phydev, PHYACC_ATTR_BANK_SMI,
|
||
|
0x10, 0x8, 0x40);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(cable_test); i++) {
|
||
|
if (cable_test[i].mode == PHYACC_ATTR_MODE_MODIFY) {
|
||
|
rc = access_ereg_modify_changed(phydev,
|
||
|
cable_test[i].bank,
|
||
|
cable_test[i].offset,
|
||
|
cable_test[i].val,
|
||
|
cable_test[i].mask);
|
||
|
/* wait 50ms */
|
||
|
msleep(50);
|
||
|
} else {
|
||
|
rc = access_ereg(phydev, cable_test[i].mode,
|
||
|
cable_test[i].bank,
|
||
|
cable_test[i].offset,
|
||
|
cable_test[i].val);
|
||
|
}
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
}
|
||
|
/* cable diag started */
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_cable_test_report_trans(u32 result)
|
||
|
{
|
||
|
switch (result) {
|
||
|
case LAN87XX_CABLE_TEST_OK:
|
||
|
return ETHTOOL_A_CABLE_RESULT_CODE_OK;
|
||
|
case LAN87XX_CABLE_TEST_OPEN:
|
||
|
return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
|
||
|
case LAN87XX_CABLE_TEST_SAME_SHORT:
|
||
|
return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
|
||
|
default:
|
||
|
/* DIAGNOSTIC_ERROR */
|
||
|
return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int lan87xx_cable_test_report(struct phy_device *phydev)
|
||
|
{
|
||
|
int pos_peak_cycle = 0, pos_peak_in_phases = 0, pos_peak_phase = 0;
|
||
|
int neg_peak_cycle = 0, neg_peak_in_phases = 0, neg_peak_phase = 0;
|
||
|
int noise_margin = 20, time_margin = 89, jitter_var = 30;
|
||
|
int min_time_diff = 96, max_time_diff = 96 + time_margin;
|
||
|
bool fault = false, check_a = false, check_b = false;
|
||
|
int gain_idx = 0, pos_peak = 0, neg_peak = 0;
|
||
|
int pos_peak_time = 0, neg_peak_time = 0;
|
||
|
int pos_peak_in_phases_hybrid = 0;
|
||
|
int detect = -1;
|
||
|
|
||
|
gain_idx = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, 151, 0);
|
||
|
/* read non-hybrid results */
|
||
|
pos_peak = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, 153, 0);
|
||
|
neg_peak = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, 154, 0);
|
||
|
pos_peak_time = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, 156, 0);
|
||
|
neg_peak_time = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, 157, 0);
|
||
|
|
||
|
pos_peak_cycle = (pos_peak_time >> 7) & 0x7F;
|
||
|
/* calculate non-hybrid values */
|
||
|
pos_peak_phase = pos_peak_time & 0x7F;
|
||
|
pos_peak_in_phases = (pos_peak_cycle * 96) + pos_peak_phase;
|
||
|
neg_peak_cycle = (neg_peak_time >> 7) & 0x7F;
|
||
|
neg_peak_phase = neg_peak_time & 0x7F;
|
||
|
neg_peak_in_phases = (neg_peak_cycle * 96) + neg_peak_phase;
|
||
|
|
||
|
/* process values */
|
||
|
check_a =
|
||
|
((pos_peak_in_phases - neg_peak_in_phases) >= min_time_diff) &&
|
||
|
((pos_peak_in_phases - neg_peak_in_phases) < max_time_diff) &&
|
||
|
pos_peak_in_phases_hybrid < pos_peak_in_phases &&
|
||
|
(pos_peak_in_phases_hybrid < (neg_peak_in_phases + jitter_var));
|
||
|
check_b =
|
||
|
((neg_peak_in_phases - pos_peak_in_phases) >= min_time_diff) &&
|
||
|
((neg_peak_in_phases - pos_peak_in_phases) < max_time_diff) &&
|
||
|
pos_peak_in_phases_hybrid < neg_peak_in_phases &&
|
||
|
(pos_peak_in_phases_hybrid < (pos_peak_in_phases + jitter_var));
|
||
|
|
||
|
if (pos_peak_in_phases > neg_peak_in_phases && check_a)
|
||
|
detect = 2;
|
||
|
else if ((neg_peak_in_phases > pos_peak_in_phases) && check_b)
|
||
|
detect = 1;
|
||
|
|
||
|
if (pos_peak > noise_margin && neg_peak > noise_margin &&
|
||
|
gain_idx >= 0) {
|
||
|
if (detect == 1 || detect == 2)
|
||
|
fault = true;
|
||
|
}
|
||
|
|
||
|
if (!fault)
|
||
|
detect = 0;
|
||
|
|
||
|
ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
|
||
|
lan87xx_cable_test_report_trans(detect));
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_cable_test_get_status(struct phy_device *phydev,
|
||
|
bool *finished)
|
||
|
{
|
||
|
int rc = 0;
|
||
|
|
||
|
*finished = false;
|
||
|
|
||
|
/* check if cable diag was finished */
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ, PHYACC_ATTR_BANK_DSP,
|
||
|
90, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
if ((rc & 2) == 2) {
|
||
|
/* stop cable diag*/
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_DSP,
|
||
|
90, 0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
*finished = true;
|
||
|
|
||
|
return lan87xx_cable_test_report(phydev);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_read_status(struct phy_device *phydev)
|
||
|
{
|
||
|
int rc = 0;
|
||
|
|
||
|
rc = phy_read(phydev, T1_MODE_STAT_REG);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
if (rc & T1_LINK_UP_MSK)
|
||
|
phydev->link = 1;
|
||
|
else
|
||
|
phydev->link = 0;
|
||
|
|
||
|
phydev->speed = SPEED_UNKNOWN;
|
||
|
phydev->duplex = DUPLEX_UNKNOWN;
|
||
|
phydev->pause = 0;
|
||
|
phydev->asym_pause = 0;
|
||
|
|
||
|
rc = genphy_read_master_slave(phydev);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = genphy_read_status_fixed(phydev);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_config_aneg(struct phy_device *phydev)
|
||
|
{
|
||
|
u16 ctl = 0;
|
||
|
|
||
|
switch (phydev->master_slave_set) {
|
||
|
case MASTER_SLAVE_CFG_MASTER_FORCE:
|
||
|
ctl |= CTL1000_AS_MASTER;
|
||
|
break;
|
||
|
case MASTER_SLAVE_CFG_SLAVE_FORCE:
|
||
|
break;
|
||
|
case MASTER_SLAVE_CFG_UNKNOWN:
|
||
|
case MASTER_SLAVE_CFG_UNSUPPORTED:
|
||
|
return 0;
|
||
|
default:
|
||
|
phydev_warn(phydev, "Unsupported Master/Slave mode\n");
|
||
|
return -EOPNOTSUPP;
|
||
|
}
|
||
|
|
||
|
return phy_modify_changed(phydev, MII_CTRL1000, CTL1000_AS_MASTER, ctl);
|
||
|
}
|
||
|
|
||
|
static int lan87xx_get_sqi(struct phy_device *phydev)
|
||
|
{
|
||
|
u8 sqi_value = 0;
|
||
|
int rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_WRITE,
|
||
|
PHYACC_ATTR_BANK_DSP, T1_COEF_RW_CTL_CFG, 0x0301);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
rc = access_ereg(phydev, PHYACC_ATTR_MODE_READ,
|
||
|
PHYACC_ATTR_BANK_DSP, T1_DCQ_SQI_REG, 0x0);
|
||
|
if (rc < 0)
|
||
|
return rc;
|
||
|
|
||
|
sqi_value = FIELD_GET(T1_DCQ_SQI_MSK, rc);
|
||
|
|
||
|
return sqi_value;
|
||
|
}
|
||
|
|
||
|
static int lan87xx_get_sqi_max(struct phy_device *phydev)
|
||
|
{
|
||
|
return LAN87XX_MAX_SQI;
|
||
|
}
|
||
|
|
||
|
static struct phy_driver microchip_t1_phy_driver[] = {
|
||
|
{
|
||
|
PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX),
|
||
|
.name = "Microchip LAN87xx T1",
|
||
|
.flags = PHY_POLL_CABLE_TEST,
|
||
|
.features = PHY_BASIC_T1_FEATURES,
|
||
|
.config_init = lan87xx_config_init,
|
||
|
.config_intr = lan87xx_phy_config_intr,
|
||
|
.handle_interrupt = lan87xx_handle_interrupt,
|
||
|
.suspend = genphy_suspend,
|
||
|
.resume = genphy_resume,
|
||
|
.config_aneg = lan87xx_config_aneg,
|
||
|
.read_status = lan87xx_read_status,
|
||
|
.get_sqi = lan87xx_get_sqi,
|
||
|
.get_sqi_max = lan87xx_get_sqi_max,
|
||
|
.cable_test_start = lan87xx_cable_test_start,
|
||
|
.cable_test_get_status = lan87xx_cable_test_get_status,
|
||
|
},
|
||
|
{
|
||
|
PHY_ID_MATCH_MODEL(PHY_ID_LAN937X),
|
||
|
.name = "Microchip LAN937x T1",
|
||
|
.flags = PHY_POLL_CABLE_TEST,
|
||
|
.features = PHY_BASIC_T1_FEATURES,
|
||
|
.config_init = lan87xx_config_init,
|
||
|
.config_intr = lan87xx_phy_config_intr,
|
||
|
.handle_interrupt = lan87xx_handle_interrupt,
|
||
|
.suspend = genphy_suspend,
|
||
|
.resume = genphy_resume,
|
||
|
.config_aneg = lan87xx_config_aneg,
|
||
|
.read_status = lan87xx_read_status,
|
||
|
.get_sqi = lan87xx_get_sqi,
|
||
|
.get_sqi_max = lan87xx_get_sqi_max,
|
||
|
.cable_test_start = lan87xx_cable_test_start,
|
||
|
.cable_test_get_status = lan87xx_cable_test_get_status,
|
||
|
}
|
||
|
};
|
||
|
|
||
|
module_phy_driver(microchip_t1_phy_driver);
|
||
|
|
||
|
static struct mdio_device_id __maybe_unused microchip_t1_tbl[] = {
|
||
|
{ PHY_ID_MATCH_MODEL(PHY_ID_LAN87XX) },
|
||
|
{ PHY_ID_MATCH_MODEL(PHY_ID_LAN937X) },
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
MODULE_DEVICE_TABLE(mdio, microchip_t1_tbl);
|
||
|
|
||
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
||
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
||
|
MODULE_LICENSE("GPL");
|