734 lines
20 KiB
C
734 lines
20 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
/*
|
||
|
* Driver for Texas Instruments / National Semiconductor LM95234
|
||
|
*
|
||
|
* Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net>
|
||
|
*
|
||
|
* Derived from lm95241.c
|
||
|
* Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/jiffies.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/hwmon.h>
|
||
|
#include <linux/hwmon-sysfs.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/mutex.h>
|
||
|
#include <linux/sysfs.h>
|
||
|
|
||
|
#define DRVNAME "lm95234"
|
||
|
|
||
|
enum chips { lm95233, lm95234 };
|
||
|
|
||
|
static const unsigned short normal_i2c[] = {
|
||
|
0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END };
|
||
|
|
||
|
/* LM95234 registers */
|
||
|
#define LM95234_REG_MAN_ID 0xFE
|
||
|
#define LM95234_REG_CHIP_ID 0xFF
|
||
|
#define LM95234_REG_STATUS 0x02
|
||
|
#define LM95234_REG_CONFIG 0x03
|
||
|
#define LM95234_REG_CONVRATE 0x04
|
||
|
#define LM95234_REG_STS_FAULT 0x07
|
||
|
#define LM95234_REG_STS_TCRIT1 0x08
|
||
|
#define LM95234_REG_STS_TCRIT2 0x09
|
||
|
#define LM95234_REG_TEMPH(x) ((x) + 0x10)
|
||
|
#define LM95234_REG_TEMPL(x) ((x) + 0x20)
|
||
|
#define LM95234_REG_UTEMPH(x) ((x) + 0x19) /* Remote only */
|
||
|
#define LM95234_REG_UTEMPL(x) ((x) + 0x29)
|
||
|
#define LM95234_REG_REM_MODEL 0x30
|
||
|
#define LM95234_REG_REM_MODEL_STS 0x38
|
||
|
#define LM95234_REG_OFFSET(x) ((x) + 0x31) /* Remote only */
|
||
|
#define LM95234_REG_TCRIT1(x) ((x) + 0x40)
|
||
|
#define LM95234_REG_TCRIT2(x) ((x) + 0x49) /* Remote channel 1,2 */
|
||
|
#define LM95234_REG_TCRIT_HYST 0x5a
|
||
|
|
||
|
#define NATSEMI_MAN_ID 0x01
|
||
|
#define LM95233_CHIP_ID 0x89
|
||
|
#define LM95234_CHIP_ID 0x79
|
||
|
|
||
|
/* Client data (each client gets its own) */
|
||
|
struct lm95234_data {
|
||
|
struct i2c_client *client;
|
||
|
const struct attribute_group *groups[3];
|
||
|
struct mutex update_lock;
|
||
|
unsigned long last_updated, interval; /* in jiffies */
|
||
|
bool valid; /* false until following fields are valid */
|
||
|
/* registers values */
|
||
|
int temp[5]; /* temperature (signed) */
|
||
|
u32 status; /* fault/alarm status */
|
||
|
u8 tcrit1[5]; /* critical temperature limit */
|
||
|
u8 tcrit2[2]; /* high temperature limit */
|
||
|
s8 toffset[4]; /* remote temperature offset */
|
||
|
u8 thyst; /* common hysteresis */
|
||
|
|
||
|
u8 sensor_type; /* temperature sensor type */
|
||
|
};
|
||
|
|
||
|
static int lm95234_read_temp(struct i2c_client *client, int index, int *t)
|
||
|
{
|
||
|
int val;
|
||
|
u16 temp = 0;
|
||
|
|
||
|
if (index) {
|
||
|
val = i2c_smbus_read_byte_data(client,
|
||
|
LM95234_REG_UTEMPH(index - 1));
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
temp = val << 8;
|
||
|
val = i2c_smbus_read_byte_data(client,
|
||
|
LM95234_REG_UTEMPL(index - 1));
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
temp |= val;
|
||
|
*t = temp;
|
||
|
}
|
||
|
/*
|
||
|
* Read signed temperature if unsigned temperature is 0,
|
||
|
* or if this is the local sensor.
|
||
|
*/
|
||
|
if (!temp) {
|
||
|
val = i2c_smbus_read_byte_data(client,
|
||
|
LM95234_REG_TEMPH(index));
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
temp = val << 8;
|
||
|
val = i2c_smbus_read_byte_data(client,
|
||
|
LM95234_REG_TEMPL(index));
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
temp |= val;
|
||
|
*t = (s16)temp;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static u16 update_intervals[] = { 143, 364, 1000, 2500 };
|
||
|
|
||
|
/* Fill value cache. Must be called with update lock held. */
|
||
|
|
||
|
static int lm95234_fill_cache(struct lm95234_data *data,
|
||
|
struct i2c_client *client)
|
||
|
{
|
||
|
int i, ret;
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]);
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) {
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
data->tcrit1[i] = ret;
|
||
|
}
|
||
|
for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) {
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
data->tcrit2[i] = ret;
|
||
|
}
|
||
|
for (i = 0; i < ARRAY_SIZE(data->toffset); i++) {
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i));
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
data->toffset[i] = ret;
|
||
|
}
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
data->thyst = ret;
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
data->sensor_type = ret;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lm95234_update_device(struct lm95234_data *data)
|
||
|
{
|
||
|
struct i2c_client *client = data->client;
|
||
|
int ret;
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
|
||
|
if (time_after(jiffies, data->last_updated + data->interval) ||
|
||
|
!data->valid) {
|
||
|
int i;
|
||
|
|
||
|
if (!data->valid) {
|
||
|
ret = lm95234_fill_cache(data, client);
|
||
|
if (ret < 0)
|
||
|
goto abort;
|
||
|
}
|
||
|
|
||
|
data->valid = false;
|
||
|
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
|
||
|
ret = lm95234_read_temp(client, i, &data->temp[i]);
|
||
|
if (ret < 0)
|
||
|
goto abort;
|
||
|
}
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT);
|
||
|
if (ret < 0)
|
||
|
goto abort;
|
||
|
data->status = ret;
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1);
|
||
|
if (ret < 0)
|
||
|
goto abort;
|
||
|
data->status |= ret << 8;
|
||
|
|
||
|
ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2);
|
||
|
if (ret < 0)
|
||
|
goto abort;
|
||
|
data->status |= ret << 16;
|
||
|
|
||
|
data->last_updated = jiffies;
|
||
|
data->valid = true;
|
||
|
}
|
||
|
ret = 0;
|
||
|
abort:
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, "%d\n",
|
||
|
DIV_ROUND_CLOSEST(data->temp[index] * 125, 32));
|
||
|
}
|
||
|
|
||
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
u32 mask = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, "%u", !!(data->status & mask));
|
||
|
}
|
||
|
|
||
|
static ssize_t type_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
u8 mask = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n");
|
||
|
}
|
||
|
|
||
|
static ssize_t type_store(struct device *dev, struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
unsigned long val;
|
||
|
u8 mask = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtoul(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
if (val != 1 && val != 2)
|
||
|
return -EINVAL;
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
if (val == 1)
|
||
|
data->sensor_type |= mask;
|
||
|
else
|
||
|
data->sensor_type &= ~mask;
|
||
|
data->valid = false;
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_REM_MODEL,
|
||
|
data->sensor_type);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit2_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, "%u", data->tcrit2[index] * 1000);
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit2_store(struct device *dev, struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
long val;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtol(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, index ? 255 : 127);
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
data->tcrit2[index] = val;
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT2(index), val);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit2_hyst_show(struct device *dev,
|
||
|
struct device_attribute *attr, char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Result can be negative, so be careful with unsigned operands */
|
||
|
return sprintf(buf, "%d",
|
||
|
((int)data->tcrit2[index] - (int)data->thyst) * 1000);
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit1_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
|
||
|
return sprintf(buf, "%u", data->tcrit1[index] * 1000);
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit1_store(struct device *dev, struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
long val;
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtol(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 255);
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
data->tcrit1[index] = val;
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT1(index), val);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit1_hyst_show(struct device *dev,
|
||
|
struct device_attribute *attr, char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
/* Result can be negative, so be careful with unsigned operands */
|
||
|
return sprintf(buf, "%d",
|
||
|
((int)data->tcrit1[index] - (int)data->thyst) * 1000);
|
||
|
}
|
||
|
|
||
|
static ssize_t tcrit1_hyst_store(struct device *dev,
|
||
|
struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
long val;
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtol(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
val = DIV_ROUND_CLOSEST(val, 1000);
|
||
|
val = clamp_val((int)data->tcrit1[index] - val, 0, 31);
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
data->thyst = val;
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT_HYST, val);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static ssize_t offset_show(struct device *dev, struct device_attribute *attr,
|
||
|
char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, "%d", data->toffset[index] * 500);
|
||
|
}
|
||
|
|
||
|
static ssize_t offset_store(struct device *dev, struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int index = to_sensor_dev_attr(attr)->index;
|
||
|
int ret = lm95234_update_device(data);
|
||
|
long val;
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtol(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Accuracy is 1/2 degrees C */
|
||
|
val = clamp_val(DIV_ROUND_CLOSEST(val, 500), -128, 127);
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
data->toffset[index] = val;
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_OFFSET(index), val);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static ssize_t update_interval_show(struct device *dev,
|
||
|
struct device_attribute *attr, char *buf)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int ret = lm95234_update_device(data);
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return sprintf(buf, "%lu\n",
|
||
|
DIV_ROUND_CLOSEST(data->interval * 1000, HZ));
|
||
|
}
|
||
|
|
||
|
static ssize_t update_interval_store(struct device *dev,
|
||
|
struct device_attribute *attr,
|
||
|
const char *buf, size_t count)
|
||
|
{
|
||
|
struct lm95234_data *data = dev_get_drvdata(dev);
|
||
|
int ret = lm95234_update_device(data);
|
||
|
unsigned long val;
|
||
|
u8 regval;
|
||
|
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
ret = kstrtoul(buf, 10, &val);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
for (regval = 0; regval < 3; regval++) {
|
||
|
if (val <= update_intervals[regval])
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
mutex_lock(&data->update_lock);
|
||
|
data->interval = msecs_to_jiffies(update_intervals[regval]);
|
||
|
i2c_smbus_write_byte_data(data->client, LM95234_REG_CONVRATE, regval);
|
||
|
mutex_unlock(&data->update_lock);
|
||
|
|
||
|
return count;
|
||
|
}
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4);
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, BIT(0) | BIT(1));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, BIT(2) | BIT(3));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp4_fault, alarm, BIT(4) | BIT(5));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp5_fault, alarm, BIT(6) | BIT(7));
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp2_type, type, BIT(1));
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp3_type, type, BIT(2));
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp4_type, type, BIT(3));
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp5_type, type, BIT(4));
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp1_max, tcrit1, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp2_max, tcrit2, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp3_max, tcrit2, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp4_max, tcrit1, 3);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp5_max, tcrit1, 4);
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, tcrit1_hyst, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, tcrit2_hyst, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, tcrit2_hyst, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, tcrit1_hyst, 3);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp5_max_hyst, tcrit1_hyst, 4);
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, BIT(0 + 8));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, BIT(1 + 16));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, BIT(2 + 16));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, alarm, BIT(3 + 8));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp5_max_alarm, alarm, BIT(4 + 8));
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp2_crit, tcrit1, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp3_crit, tcrit1, 2);
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, tcrit1_hyst, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, tcrit1_hyst, 2);
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, BIT(1 + 8));
|
||
|
static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, BIT(2 + 8));
|
||
|
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 0);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 1);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 2);
|
||
|
static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 3);
|
||
|
|
||
|
static DEVICE_ATTR_RW(update_interval);
|
||
|
|
||
|
static struct attribute *lm95234_common_attrs[] = {
|
||
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_type.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_type.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_crit.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_crit.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp2_offset.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp3_offset.dev_attr.attr,
|
||
|
&dev_attr_update_interval.attr,
|
||
|
NULL
|
||
|
};
|
||
|
|
||
|
static const struct attribute_group lm95234_common_group = {
|
||
|
.attrs = lm95234_common_attrs,
|
||
|
};
|
||
|
|
||
|
static struct attribute *lm95234_attrs[] = {
|
||
|
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_input.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_fault.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_fault.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_type.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_type.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_max.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_max.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp4_offset.dev_attr.attr,
|
||
|
&sensor_dev_attr_temp5_offset.dev_attr.attr,
|
||
|
NULL
|
||
|
};
|
||
|
|
||
|
static const struct attribute_group lm95234_group = {
|
||
|
.attrs = lm95234_attrs,
|
||
|
};
|
||
|
|
||
|
static int lm95234_detect(struct i2c_client *client,
|
||
|
struct i2c_board_info *info)
|
||
|
{
|
||
|
struct i2c_adapter *adapter = client->adapter;
|
||
|
int address = client->addr;
|
||
|
u8 config_mask, model_mask;
|
||
|
int mfg_id, chip_id, val;
|
||
|
const char *name;
|
||
|
|
||
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||
|
return -ENODEV;
|
||
|
|
||
|
mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID);
|
||
|
if (mfg_id != NATSEMI_MAN_ID)
|
||
|
return -ENODEV;
|
||
|
|
||
|
chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID);
|
||
|
switch (chip_id) {
|
||
|
case LM95233_CHIP_ID:
|
||
|
if (address != 0x18 && address != 0x2a && address != 0x2b)
|
||
|
return -ENODEV;
|
||
|
config_mask = 0xbf;
|
||
|
model_mask = 0xf9;
|
||
|
name = "lm95233";
|
||
|
break;
|
||
|
case LM95234_CHIP_ID:
|
||
|
if (address != 0x18 && address != 0x4d && address != 0x4e)
|
||
|
return -ENODEV;
|
||
|
config_mask = 0xbc;
|
||
|
model_mask = 0xe1;
|
||
|
name = "lm95234";
|
||
|
break;
|
||
|
default:
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS);
|
||
|
if (val & 0x30)
|
||
|
return -ENODEV;
|
||
|
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
|
||
|
if (val & config_mask)
|
||
|
return -ENODEV;
|
||
|
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
|
||
|
if (val & 0xfc)
|
||
|
return -ENODEV;
|
||
|
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
|
||
|
if (val & model_mask)
|
||
|
return -ENODEV;
|
||
|
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
|
||
|
if (val & model_mask)
|
||
|
return -ENODEV;
|
||
|
|
||
|
strscpy(info->type, name, I2C_NAME_SIZE);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lm95234_init_client(struct i2c_client *client)
|
||
|
{
|
||
|
int val, model;
|
||
|
|
||
|
/* start conversion if necessary */
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
if (val & 0x40)
|
||
|
i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG,
|
||
|
val & ~0x40);
|
||
|
|
||
|
/* If diode type status reports an error, try to fix it */
|
||
|
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
|
||
|
if (val < 0)
|
||
|
return val;
|
||
|
model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
|
||
|
if (model < 0)
|
||
|
return model;
|
||
|
if (model & val) {
|
||
|
dev_notice(&client->dev,
|
||
|
"Fixing remote diode type misconfiguration (0x%x)\n",
|
||
|
val);
|
||
|
i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL,
|
||
|
model & ~val);
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct i2c_device_id lm95234_id[];
|
||
|
|
||
|
static int lm95234_probe(struct i2c_client *client)
|
||
|
{
|
||
|
struct device *dev = &client->dev;
|
||
|
struct lm95234_data *data;
|
||
|
struct device *hwmon_dev;
|
||
|
int err;
|
||
|
|
||
|
data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL);
|
||
|
if (!data)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
data->client = client;
|
||
|
mutex_init(&data->update_lock);
|
||
|
|
||
|
/* Initialize the LM95234 chip */
|
||
|
err = lm95234_init_client(client);
|
||
|
if (err < 0)
|
||
|
return err;
|
||
|
|
||
|
data->groups[0] = &lm95234_common_group;
|
||
|
if (i2c_match_id(lm95234_id, client)->driver_data == lm95234)
|
||
|
data->groups[1] = &lm95234_group;
|
||
|
|
||
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
||
|
data, data->groups);
|
||
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
||
|
}
|
||
|
|
||
|
/* Driver data (common to all clients) */
|
||
|
static const struct i2c_device_id lm95234_id[] = {
|
||
|
{ "lm95233", lm95233 },
|
||
|
{ "lm95234", lm95234 },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, lm95234_id);
|
||
|
|
||
|
static struct i2c_driver lm95234_driver = {
|
||
|
.class = I2C_CLASS_HWMON,
|
||
|
.driver = {
|
||
|
.name = DRVNAME,
|
||
|
},
|
||
|
.probe_new = lm95234_probe,
|
||
|
.id_table = lm95234_id,
|
||
|
.detect = lm95234_detect,
|
||
|
.address_list = normal_i2c,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(lm95234_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
||
|
MODULE_DESCRIPTION("LM95233/LM95234 sensor driver");
|
||
|
MODULE_LICENSE("GPL");
|