linuxdebug/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi

452 lines
9.4 KiB
Plaintext
Raw Permalink Normal View History

2024-07-16 15:50:57 +02:00
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Copyright 2015 Armadeus Systems <support@armadeus.com>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
chosen {
stdout-path = &uart4;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 191000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <0>;
power-supply = <&reg_5v>;
};
disp0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_disp0>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
display_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
port@1 {
reg = <1>;
display_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
user-button {
label = "User button";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
user-led {
label = "User LED";
gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "on";
};
};
panel {
compatible = "armadeus,st0700-adapt";
power-supply = <&reg_3p3v>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
vin-supply = <&reg_5v>;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_usb_otg_vbus: regulator-usb-otg-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
sound {
compatible = "fsl,imx6-armadeus-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx6-armadeus-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <3>;
};
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-out;
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
<&gpio4 10 GPIO_ACTIVE_LOW>,
<&gpio4 11 GPIO_ACTIVE_LOW>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
touchscreen@48 {
compatible = "semtech,sx8654";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_touchscreen>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
};
rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display_in>;
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
&pwm3 {
#pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* GSM */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
uart-has-rtscts;
status = "okay";
};
/* console */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_5v>;
phy_type = "utmi";
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
vbus-supply = <&reg_usb_otg_vbus>;
dr_mode = "otg";
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
no-1-8-v;
status = "okay";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
status = "okay";
};
&ssi1 {
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
>;
};
pinctrl_gpios: gpiosgrp {
fsl,pins = <
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1
MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1
MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1
MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1
>;
};
pinctrl_gsm: gsmgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */
MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
>;
};
pinctrl_ipu1_disp0: ipu1disp0grp {
fsl,pins = <
MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1
MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1
MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1
MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1
MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1
MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1
MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1
MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1
MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1
MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1
MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1
MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1
MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1
MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1
MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1
MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1
MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1
MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1
MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1
MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1
MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1
MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>;
};
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
>;
};
pinctrl_touchscreen: touchscreengrp {
fsl,pins = <
MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
>;
};
};