93 lines
2.4 KiB
YAML
93 lines
2.4 KiB
YAML
|
# SPDX-License-Identifier: GPL-2.0
|
||
|
|
# Copyright (C) 2021 Sebastian Reichel
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Binding for TI BQ2419x Li-Ion Battery Charger
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Sebastian Reichel <sre@kernel.org>
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: power-supply.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- ti,bq24190
|
||
|
|
- ti,bq24192
|
||
|
|
- ti,bq24192i
|
||
|
|
- ti,bq24196
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
usb-otg-vbus:
|
||
|
|
$ref: /schemas/regulator/regulator.yaml#
|
||
|
|
description: |
|
||
|
|
Regulator that is used to control the VBUS voltage direction for
|
||
|
|
either USB host mode or for charging on the OTG port
|
||
|
|
|
||
|
|
ti,system-minimum-microvolt:
|
||
|
|
description: |
|
||
|
|
when power is connected and the battery is below minimum system voltage,
|
||
|
|
the system will be regulated above this setting.
|
||
|
|
|
||
|
|
omit-battery-class:
|
||
|
|
type: boolean
|
||
|
|
description: |
|
||
|
|
If this property is set, the operating system does not try to create a
|
||
|
|
battery device.
|
||
|
|
|
||
|
|
monitored-battery:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description: |
|
||
|
|
phandle to a "simple-battery" compatible node.
|
||
|
|
|
||
|
|
This property must be a phandle to a node using the format described
|
||
|
|
in battery.yaml, with the following properties being required:
|
||
|
|
- precharge-current-microamp: maximum charge current during precharge phase
|
||
|
|
(typically 20% of battery capacity).
|
||
|
|
- charge-term-current-microamp: a charge cycle terminates when the battery voltage is
|
||
|
|
above recharge threshold, and the current is below this
|
||
|
|
setting (typically 10% of battery capacity).
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
|
||
|
|
additionalProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
|
||
|
|
bat: battery {
|
||
|
|
compatible = "simple-battery";
|
||
|
|
precharge-current-microamp = <256000>;
|
||
|
|
charge-term-current-microamp = <128000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
charger@6a {
|
||
|
|
compatible = "ti,bq24190";
|
||
|
|
reg = <0x6a>;
|
||
|
|
interrupt-parent = <&gpiochip>;
|
||
|
|
interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
monitored-battery = <&bat>;
|
||
|
|
ti,system-minimum-microvolt = <3200000>;
|
||
|
|
|
||
|
|
usb_otg_vbus: usb-otg-vbus { };
|
||
|
|
};
|
||
|
|
};
|