[ Upstream commit 7851bf649d423edd7286b292739f2eefded3d35c ]
Patch series "fs/dax: Fix ZONE_DEVICE page reference counts", v9.
Device and FS DAX pages have always maintained their own page reference
counts without following the normal rules for page reference counting. In
particular pages are considered free when the refcount hits one rather
than zero and refcounts are not added when mapping the page.
Tracking this requires special PTE bits (PTE_DEVMAP) and a secondary
mechanism for allowing GUP to hold references on the page (see
get_dev_pagemap). However there doesn't seem to be any reason why FS DAX
pages need their own reference counting scheme.
By treating the refcounts on these pages the same way as normal pages we
can remove a lot of special checks. In particular pXd_trans_huge()
becomes the same as pXd_leaf(), although I haven't made that change here.
It also frees up a valuable SW define PTE bit on architectures that have
devmap PTE bits defined.
It also almost certainly allows further clean-up of the devmap managed
functions, but I have left that as a future improvment. It also enables
support for compound ZONE_DEVICE pages which is one of my primary
motivators for doing this work.
This patch (of 20):
FS DAX requires file systems to call into the DAX layout prior to
unlinking inodes to ensure there is no ongoing DMA or other remote access
to the direct mapped page. The fuse file system implements
fuse_dax_break_layouts() to do this which includes a comment indicating
that passing dmap_end == 0 leads to unmapping of the whole file.
However this is not true - passing dmap_end == 0 will not unmap anything
before dmap_start, and further more dax_layout_busy_page_range() will not
scan any of the range to see if there maybe ongoing DMA access to the
range. Fix this by passing -1 for dmap_end to fuse_dax_break_layouts()
which will invalidate the entire file range to
dax_layout_busy_page_range().
Link: https://lkml.kernel.org/r/cover.8068ad144a7eea4a813670301f4d2a86a8e68ec4.1740713401.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/f09a34b6c40032022e4ddee6fadb7cc676f08867.1740713401.git-series.apopple@nvidia.com
Fixes: 6ae330cad6 ("virtiofs: serialize truncate/punch_hole and dax fault path")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4c173dfbb6c78568578ff18f9e8822d7bd0e31b ]
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5cadfbd5a11e5495cac217534c5f788168b1afd7 upstream.
Add an init flag idicating whether the FUSE_EXPIRE_ONLY flag of
FUSE_NOTIFY_INVAL_ENTRY is effective.
This is needed for backports of this feature, otherwise the server could
just check the protocol version.
Fixes: 4f8d37020e1f ("fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY")
Cc: <stable@vger.kernel.org> # v6.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15d937d7ca8c55d2b0ce9116e20c780fdd0b67cc ]
Will need to add supplementary groups to create messages, so add the
general concept of a request extension. A request extension is appended to
the end of the main request. It has a header indicating the size and type
of the extension.
The create security context (fuse_secctx_*) is similar to the generic
request extension, so include that as well in a backward compatible manner.
Add the total extension length to the request header. The offset of the
extension block within the request can be calculated by:
inh->len - inh->total_extlen * 8
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 153524053bbb0d27bb2e0be36d1b46862e9ce74c ]
In general, as of now, in FUSE, direct writes on the same file are
serialized over inode lock i.e we hold inode lock for the full duration of
the write request. I could not find in fuse code and git history a comment
which clearly explains why this exclusive lock is taken for direct writes.
Following might be the reasons for acquiring an exclusive lock but not be
limited to
1) Our guess is some USER space fuse implementations might be relying on
this lock for serialization.
2) The lock protects against file read/write size races.
3) Ruling out any issues arising from partial write failures.
This patch relaxes the exclusive lock for direct non-extending writes only.
File size extending writes might not need the lock either, but we are not
entirely sure if there is a risk to introduce any kind of regression.
Furthermore, benchmarking with fio does not show a difference between patch
versions that take on file size extension a) an exclusive lock and b) a
shared lock.
A possible example of an issue with i_size extending writes are write error
cases. Some writes might succeed and others might fail for file system
internal reasons - for example ENOSPACE. With parallel file size extending
writes it _might_ be difficult to revert the action of the failing write,
especially to restore the right i_size.
With these changes, we allow non-extending parallel direct writes on the
same file with the help of a flag called FOPEN_PARALLEL_DIRECT_WRITES. If
this flag is set on the file (flag is passed from libfuse to fuse kernel as
part of file open/create), we do not take exclusive lock anymore, but
instead use a shared lock that allows non-extending writes to run in
parallel. FUSE implementations which rely on this inode lock for
serialization can continue to do so and serialized direct writes are still
the default. Implementations that do not do write serialization need to be
updated and need to set the FOPEN_PARALLEL_DIRECT_WRITES flag in their file
open/create reply.
On patch review there were concerns that network file systems (or vfs
multiple mounts of the same file system) might have issues with parallel
writes. We believe this is not the case, as this is just a local lock,
which network file systems could not rely on anyway. I.e. this lock is
just for local consistency.
Signed-off-by: Dharmendra Singh <dsingh@ddn.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f8d37020e1fd0bf6ee9381ba918135ef3712efd ]
Add a flag to entry expiration that lets the filesystem expire a dentry
without kicking it out from the cache immediately.
This makes a difference for overmounted dentries, where plain invalidation
would detach all submounts before dropping the dentry from the cache. If
only expiry is set on the dentry, then any overmounts are left alone and
until ->d_revalidate() is called.
Note: ->d_revalidate() is not called for the case of following a submount,
so invalidation will only be triggered for the non-overmounted case. The
dentry could also be mounted in a different mount instance, in which case
any submounts will still be detached.
Suggested-by: Jakob Blomer <jblomer@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Stable-dep-of: 3002240d1649 ("fuse: fix memory leak in fuse_create_open")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b18915248a15eae7d901262f108d6ff0ffb4ffc1 upstream.
The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when
parsing the FUSE daemon's response to a zero-length getxattr/listxattr
request.
On 32-bit kernels, where ssize_t and outarg.size are the same size, this is
wrong: The min_t() will pass through any size values that are negative when
interpreted as signed.
fuse_listxattr() will then return this userspace-supplied negative value,
which callers will treat as an error value.
This kind of bug pattern can lead to fairly bad security bugs because of
how error codes are used in the Linux kernel. If a caller were to convert
the numeric error into an error pointer, like so:
struct foo *func(...) {
int len = fuse_getxattr(..., NULL, 0);
if (len < 0)
return ERR_PTR(len);
...
}
then it would end up returning this userspace-supplied negative value cast
to a pointer - but the caller of this function wouldn't recognize it as an
error pointer (IS_ERR_VALUE() only detects values in the narrow range in
which legitimate errno values are), and so it would just be treated as a
kernel pointer.
I think there is at least one theoretical codepath where this could happen,
but that path would involve virtio-fs with submounts plus some weird
SELinux configuration, so I think it's probably not a concern in practice.
Cc: stable@vger.kernel.org # v4.9
Fixes: 63401ccdb2 ("fuse: limit xattr returned size")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7790d67785302b3116bbbfda62a5a44524601a3 upstream.
In the case where the aux writeback list is dropped (e.g. the pages
have been truncated or the connection is broken), the stats for
its pages and backing device info need to be updated as well.
Fixes: e2653bd53a ("fuse: fix leaked aux requests")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # v5.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 053fc4f755ad43cf35210677bcba798ccdc48d0c ]
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3c0da3d163eb32f1f91891efaade027fa9b245b9 upstream.
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f2582 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 525bd65aa759ec320af1dc06e114ed69733e9e23 upstream.
As was done in
0200679fc795 ("tmpfs: verify {g,u}id mount options correctly")
we need to validate that the requested uid and/or gid is representable in
the filesystem's idmapping.
Cribbing from the above commit log,
The contract for {g,u}id mount options and {g,u}id values in general set
from userspace has always been that they are translated according to the
caller's idmapping. In so far, fuse has been doing the correct thing.
But since fuse is mountable in unprivileged contexts it is also
necessary to verify that the resulting {k,g}uid is representable in the
namespace of the superblock.
Fixes: c30da2e981 ("fuse: convert to use the new mount API")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/8f07d45d-c806-484d-a2e3-7a2199df1cd2@redhat.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b1fe686a765e6c0d71811d825b5a1585a202b777 ]
The root inode is assumed to be always hashed. Do not unhash the root
inode even if it is marked BAD.
Fixes: 5d069dbe8a ("fuse: fix bad inode")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68ca1b49e430f6534d0774a94147a823e3b8b26e ]
The root inode has a fixed nodeid and generation (1, 0).
Prior to the commit 15db16837a ("fuse: fix illegal access to inode with
reused nodeid") generation number on lookup was ignored. After this commit
lookup with the wrong generation number resulted in the inode being
unhashed. This is correct for non-root inodes, but replacing the root
inode is wrong and results in weird behavior.
Fix by reverting to the old behavior if ignoring the generation for the
root inode, but issuing a warning in dmesg.
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Closes: https://lore.kernel.org/all/CAOQ4uxhek5ytdN8Yz2tNEOg5ea4NkBb4nk0FGPjPk_9nz-VG3g@mail.gmail.com/
Fixes: 15db16837a ("fuse: fix illegal access to inode with reused nodeid")
Cc: <stable@vger.kernel.org> # v5.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c4d361f66ac91db8fc65061a9671682f61f4ca9d upstream.
Fuse submounts do not perform a lookup for the nodeid that they inherit
from their parent. Instead, the code decrements the nlookup on the
submount's fuse_inode when it is instantiated, and no forget is
performed when a submount root is evicted.
Trouble arises when the submount's parent is evicted despite the
submount itself being in use. In this author's case, the submount was
in a container and deatched from the initial mount namespace via a
MNT_DEATCH operation. When memory pressure triggered the shrinker, the
inode from the parent was evicted, which triggered enough forgets to
render the submount's nodeid invalid.
Since submounts should still function, even if their parent goes away,
solve this problem by sharing refcounted state between the parent and
its submount. When all of the references on this shared state reach
zero, it's safe to forget the final lookup of the fuse nodeid.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 1866d779d5 ("fuse: Allow fuse_fill_super_common() for submounts")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 upstream.
fuse_dax_conn_free() will be called when fuse_fill_super_common() fails
after fuse_dax_conn_alloc(). Then deactivate_locked_super() in
virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded
superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(),
resulting in a possible double free.
Fixes: 1dd539577c ("virtiofs: add a mount option to enable dax")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v5.10
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8bd342d50cbf606666488488f9fea374aceb2d5 upstream.
During our debugging of glusterfs, we found an Assertion failed error:
inode_lookup >= nlookup, which was caused by the nlookup value in the
kernel being greater than that in the FUSE file system.
The issue was introduced by fuse_direntplus_link, where in the function,
fuse_iget increments nlookup, and if d_splice_alias returns failure,
fuse_direntplus_link returns failure without decrementing nlookup
https://github.com/gluster/glusterfs/pull/4081
Signed-off-by: ruanmeisi <ruan.meisi@zte.com.cn>
Fixes: 0b05b18381 ("fuse: implement NFS-like readdirplus support")
Cc: <stable@vger.kernel.org> # v3.9
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a567e920fd0451bf29abc418df96c3365925770 upstream.
Fuse shouldn't return ENOSYS from its ioctl implementation. If userspace
responds with ENOSYS it should be translated to ENOTTY.
There are two ways to return an error from the IOCTL request:
- fuse_out_header.error
- fuse_ioctl_out.result
Commit 02c0cab8e7 ("fuse: ioctl: translate ENOSYS") already fixed this
issue for the first case, but missed the second case. This patch fixes the
second case.
Reported-by: Jonathan Katz <jkatz@eitmlabs.org>
Closes: https://lore.kernel.org/all/CALKgVmcC1VUV_gJVq70n--omMJZUb4HSh_FqvLTHgNBc+HCLFQ@mail.gmail.com/
Fixes: 02c0cab8e7 ("fuse: ioctl: translate ENOSYS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3066ff93476c35679cb07a97cce37d9bb07632ff upstream.
This is just a safety precaution to avoid checking flags on memory that was
initialized on the user space side. libfuse zeroes struct fuse_init_out
outarg, but this is not guranteed to be done in all implementations.
Better is to act on flags and to only apply flags2 when FUSE_INIT_EXT is
set.
There is a risk with this change, though - it might break existing user
space libraries, which are already using flags2 without setting
FUSE_INIT_EXT.
The corresponding libfuse patch is here
https://github.com/libfuse/libfuse/pull/662
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Fixes: 53db28933e ("fuse: extend init flags")
Cc: <stable@vger.kernel.org> # v5.17
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9d1c4c6df0e568207907c04aed9e7beb1294c42 upstream.
If the LOOKUP request triggered from fuse_dentry_revalidate() is
interrupted, then the dentry will be invalidated, possibly resulting in
submounts being unmounted.
Reported-by: Xu Rongbo <xurongbo@baidu.com>
Closes: https://lore.kernel.org/all/CAJfpegswN_CJJ6C3RZiaK6rpFmNyWmXfaEpnQUJ42KCwNF5tWw@mail.gmail.com/
Fixes: 9e6268db49 ("[PATCH] FUSE - read-write operations")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream.
The previous commit df8629af29 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates. This
commit complements it by also performing revalidation for rename target
dentries. Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cc4606d19e3710bfab3f6704b87ff9580493c69 upstream.
It looks like these checks were accidentally lost during the conversion to
fileattr API.
Fixes: 72227eac17 ("fuse: convert to fileattr")
Cc: <stable@vger.kernel.org> # v5.13
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed5a7047d2011cb6b2bf84ceb6680124cc6a7d95 upstream.
Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.
But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):
echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k
The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:
sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()
In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.
But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.
So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:
ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);
which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.
Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.
But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.
If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:
sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
// TAKE ON MOUNTER'S CREDS
-> ovl_do_notify_change()
-> notify_change()
// GIVE UP MOUNTER'S CREDS
// TAKE ON MOUNTER'S CREDS
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()
The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.
While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.
Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ]
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 6dd88fd59da8 ("vhost-scsi: unbreak any layout for response")
Signed-off-by: Sasha Levin <sashal@kernel.org>
file_modified() must be called with inode lock held. fuse_fallocate()
didn't lock the inode in case of just FALLOC_KEEP_SIZE flags value, which
resulted in a kernel Warning in notify_change().
Lock the inode unconditionally, like all other fallocate implementations
do.
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Reported-and-tested-by: syzbot+462da39f0667b357c4b6@syzkaller.appspotmail.com
Fixes: 4a6f278d48 ("fuse: add file_modified() to fallocate")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There's a race in fuse's readdir cache that can result in an uninitilized
page being read. The page lock is supposed to prevent this from happening
but in the following case it doesn't:
Two fuse_add_dirent_to_cache() start out and get the same parameters
(size=0,offset=0). One of them wins the race to create and lock the page,
after which it fills in data, sets rdc.size and unlocks the page.
In the meantime the page gets evicted from the cache before the other
instance gets to run. That one also creates the page, but finds the
size to be mismatched, bails out and leaves the uninitialized page in the
cache.
Fix by marking a filled page uptodate and ignoring non-uptodate pages.
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Fixes: 5d7bc7e868 ("fuse: allow using readdir cache")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY0DP2AAKCRBZ7Krx/gZQ
6/+qAQCEGQWpcC5MB17zylaX7gqzhgAsDrwtpevlno3aIv/1pQD/YWr/E8tf7WTW
ERXRXMRx1cAzBJhUhVgIY+3ANfU2Rg4=
=cko4
-----END PGP SIGNATURE-----
Merge tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs tmpfile updates from Al Viro:
"Miklos' ->tmpfile() signature change; pass an unopened struct file to
it, let it open the damn thing. Allows to add tmpfile support to FUSE"
* tag 'pull-tmpfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: implement ->tmpfile()
vfs: open inside ->tmpfile()
vfs: move open right after ->tmpfile()
vfs: make vfs_tmpfile() static
ovl: use vfs_tmpfile_open() helper
cachefiles: use vfs_tmpfile_open() helper
cachefiles: only pass inode to *mark_inode_inuse() helpers
cachefiles: tmpfile error handling cleanup
hugetlbfs: cleanup mknod and tmpfile
vfs: add vfs_tmpfile_open() helper
Evictable pages are divided into multiple generations for each lruvec.
The youngest generation number is stored in lrugen->max_seq for both
anon and file types as they are aged on an equal footing. The oldest
generation numbers are stored in lrugen->min_seq[] separately for anon
and file types as clean file pages can be evicted regardless of swap
constraints. These three variables are monotonically increasing.
Generation numbers are truncated into order_base_2(MAX_NR_GENS+1) bits
in order to fit into the gen counter in folio->flags. Each truncated
generation number is an index to lrugen->lists[]. The sliding window
technique is used to track at least MIN_NR_GENS and at most
MAX_NR_GENS generations. The gen counter stores a value within [1,
MAX_NR_GENS] while a page is on one of lrugen->lists[]. Otherwise it
stores 0.
There are two conceptually independent procedures: "the aging", which
produces young generations, and "the eviction", which consumes old
generations. They form a closed-loop system, i.e., "the page reclaim".
Both procedures can be invoked from userspace for the purposes of working
set estimation and proactive reclaim. These techniques are commonly used
to optimize job scheduling (bin packing) in data centers [1][2].
To avoid confusion, the terms "hot" and "cold" will be applied to the
multi-gen LRU, as a new convention; the terms "active" and "inactive" will
be applied to the active/inactive LRU, as usual.
The protection of hot pages and the selection of cold pages are based
on page access channels and patterns. There are two access channels:
one through page tables and the other through file descriptors. The
protection of the former channel is by design stronger because:
1. The uncertainty in determining the access patterns of the former
channel is higher due to the approximation of the accessed bit.
2. The cost of evicting the former channel is higher due to the TLB
flushes required and the likelihood of encountering the dirty bit.
3. The penalty of underprotecting the former channel is higher because
applications usually do not prepare themselves for major page
faults like they do for blocked I/O. E.g., GUI applications
commonly use dedicated I/O threads to avoid blocking rendering
threads.
There are also two access patterns: one with temporal locality and the
other without. For the reasons listed above, the former channel is
assumed to follow the former pattern unless VM_SEQ_READ or VM_RAND_READ is
present; the latter channel is assumed to follow the latter pattern unless
outlying refaults have been observed [3][4].
The next patch will address the "outlying refaults". Three macros, i.e.,
LRU_REFS_WIDTH, LRU_REFS_PGOFF and LRU_REFS_MASK, used later are added in
this patch to make the entire patchset less diffy.
A page is added to the youngest generation on faulting. The aging needs
to check the accessed bit at least twice before handing this page over to
the eviction. The first check takes care of the accessed bit set on the
initial fault; the second check makes sure this page has not been used
since then. This protocol, AKA second chance, requires a minimum of two
generations, hence MIN_NR_GENS.
[1] https://dl.acm.org/doi/10.1145/3297858.3304053
[2] https://dl.acm.org/doi/10.1145/3503222.3507731
[3] https://lwn.net/Articles/495543/
[4] https://lwn.net/Articles/815342/
Link: https://lkml.kernel.org/r/20220918080010.2920238-6-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is basically equivalent to the FUSE_CREATE operation which creates and
opens a regular file.
Add a new FUSE_TMPFILE operation, otherwise just reuse the protocol and the
code for FUSE_CREATE.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
* more new_sync_{read,write}() speedups - ITER_UBUF introduction
* ITER_PIPE cleanups
* unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
* making ITER_PIPE take high-order pages without splitting them
* handling copy_page_from_iter() for high-order pages properly
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYvHI8QAKCRBZ7Krx/gZQ
62CQAPsGlbebqBeAT2pMulaGDxfLAsgz5Yf4BEaMLhPtRqFOQgD+KrZQId7Sd8O0
3IWucpTb2c4jvLlXhGMS+XWnusQH+AQ=
=pBux
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more iov_iter updates from Al Viro:
- more new_sync_{read,write}() speedups - ITER_UBUF introduction
- ITER_PIPE cleanups
- unification of iov_iter_get_pages/iov_iter_get_pages_alloc and
switching them to advancing semantics
- making ITER_PIPE take high-order pages without splitting them
- handling copy_page_from_iter() for high-order pages properly
* tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
fix copy_page_from_iter() for compound destinations
hugetlbfs: copy_page_to_iter() can deal with compound pages
copy_page_to_iter(): don't split high-order page in case of ITER_PIPE
expand those iov_iter_advance()...
pipe_get_pages(): switch to append_pipe()
get rid of non-advancing variants
ceph: switch the last caller of iov_iter_get_pages_alloc()
9p: convert to advancing variant of iov_iter_get_pages_alloc()
af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages()
iter_to_pipe(): switch to advancing variant of iov_iter_get_pages()
block: convert to advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: advancing variants of iov_iter_get_pages{,_alloc}()
iov_iter: saner helper for page array allocation
fold __pipe_get_pages() into pipe_get_pages()
ITER_XARRAY: don't open-code DIV_ROUND_UP()
unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts
unify xarray_get_pages() and xarray_get_pages_alloc()
unify pipe_get_pages() and pipe_get_pages_alloc()
iov_iter_get_pages(): sanity-check arguments
iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper
...
Most of the users immediately follow successful iov_iter_get_pages()
with advancing by the amount it had returned.
Provide inline wrappers doing that, convert trivial open-coded
uses of those.
BTW, iov_iter_get_pages() never returns more than it had been asked
to; such checks in cifs ought to be removed someday...
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(),
checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC
ones.
We are going to expose the things like ->write_iter() et.al. to those
in subsequent commits.
New predicate (user_backed_iter()) that is true for ITER_IOVEC and
ITER_UBUF; places like direct-IO handling should use that for
checking that pages we modify after getting them from iov_iter_get_pages()
would need to be dirtied.
DO NOT assume that replacing iter_is_iovec() with user_backed_iter()
will solve all problems - there's code that uses iter_is_iovec() to
decide how to poke around in iov_iter guts and for that the predicate
replacement obviously won't suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYvD4IQAKCRDh3BK/laaZ
PDHHAP93H+2E9c6biGd5pEaL2ABChRY+wsQURzD+SZ6AL3JaUQD+KHxA4q0MJvws
L6CWcf2XptUDCLe3P6sgSTvv5Gk1OAM=
=FoXF
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Fix an issue with reusing the bdi in case of block based filesystems
- Allow root (in init namespace) to access fuse filesystems in user
namespaces if expicitly enabled with a module param
- Misc fixes
* tag 'fuse-update-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: retire block-device-based superblock on force unmount
vfs: function to prevent re-use of block-device-based superblocks
virtio_fs: Modify format for virtio_fs_direct_access
virtiofs: delete unused parameter for virtio_fs_cleanup_vqs
fuse: Add module param for CAP_SYS_ADMIN access bypassing allow_other
fuse: Remove the control interface for virtio-fs
fuse: ioctl: translate ENOSYS
fuse: limit nsec
fuse: avoid unnecessary spinlock bump
fuse: fix deadlock between atomic O_TRUNC and page invalidation
fuse: write inode in fuse_release()
Force unmount of FUSE severes the connection with the user space, even if
there are still open files. Subsequent remount tries to re-use the
superblock held by the open files, which is meaningless in the FUSE case
after disconnect - reused super block doesn't have userspace counterpart
attached to it and is incapable of doing any IO.
This patch adds the functionality only for the block-device-based supers,
since the primary use case of the feature is to gracefully handle force
unmount of external devices, mounted with FUSE. This can be further
extended to cover all superblocks, if the need arises.
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs parameter not used. So, it needs to be deleted.
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since commit 73f03c2b4b ("fuse: Restrict allow_other to the superblock's
namespace or a descendant"), access to allow_other FUSE filesystems has
been limited to users in the mounting user namespace or descendants. This
prevents a process that is privileged in its userns - but not its parent
namespaces - from mounting a FUSE fs w/ allow_other that is accessible to
processes in parent namespaces.
While this restriction makes sense overall it breaks a legitimate usecase:
I have a tracing daemon which needs to peek into process' open files in
order to symbolicate - similar to 'perf'. The daemon is a privileged
process in the root userns, but is unable to peek into FUSE filesystems
mounted by processes in child namespaces.
This patch adds a module param, allow_sys_admin_access, to act as an escape
hatch for this descendant userns logic and for the allow_other mount option
in general. Setting allow_sys_admin_access allows processes with
CAP_SYS_ADMIN in the initial userns to access FUSE filesystems irrespective
of the mounting userns or whether allow_other was set. A sysadmin setting
this param must trust FUSEs on the host to not DoS processes as described
in 73f03c2b4b.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The commit 15c8e72e88 ("fuse: allow skipping control interface and forced
unmount") tries to remove the control interface for virtio-fs since it does
not support aborting requests which are being processed. But it doesn't
work now.
This patch fixes it by skipping creating the control interface if
fuse_conn->no_control is set.
Fixes: 15c8e72e88 ("fuse: allow skipping control interface and forced unmount")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs may fail to complete updates when a filesystem lacks
fileattr/xattr syscall support and responds with an ENOSYS error code,
resulting in an unexpected "Function not implemented" error.
This bug may occur with FUSE filesystems, such as davfs2.
Steps to reproduce:
# install davfs2, e.g., apk add davfs2
mkdir /test mkdir /test/lower /test/upper /test/work /test/mnt
yes '' | mount -t davfs -o ro http://some-web-dav-server/path \
/test/lower
mount -t overlay -o upperdir=/test/upper,lowerdir=/test/lower \
-o workdir=/test/work overlay /test/mnt
# when "some-file" exists in the lowerdir, this fails with "Function
# not implemented", with dmesg showing "overlayfs: failed to retrieve
# lower fileattr (/some-file, err=-38)"
touch /test/mnt/some-file
The underlying cause of this regresion is actually in FUSE, which fails to
translate the ENOSYS error code returned by userspace filesystem (which
means that the ioctl operation is not supported) to ENOTTY.
Reported-by: Christian Kohlschütter <christian@kohlschutter.com>
Fixes: 72db82115d ("ovl: copy up sync/noatime fileattr flags")
Fixes: 59efec7b90 ("fuse: implement ioctl support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move dmap free worker kicker inside the critical region, so that extra
spinlock lock/unlock could be avoided.
Suggested-by: Liu Jiang <gerry@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_finish_open() will be called with FUSE_NOWRITE set in case of atomic
O_TRUNC open(), so commit 76224355db ("fuse: truncate pagecache on
atomic_o_trunc") replaced invalidate_inode_pages2() by truncate_pagecache()
in such a case to avoid the A-A deadlock. However, we found another A-B-B-A
deadlock related to the case above, which will cause the xfstests
generic/464 testcase hung in our virtio-fs test environment.
For example, consider two processes concurrently open one same file, one
with O_TRUNC and another without O_TRUNC. The deadlock case is described
below, if open(O_TRUNC) is already set_nowrite(acquired A), and is trying
to lock a page (acquiring B), open() could have held the page lock
(acquired B), and waiting on the page writeback (acquiring A). This would
lead to deadlocks.
open(O_TRUNC)
----------------------------------------------------------------
fuse_open_common
inode_lock [C acquire]
fuse_set_nowrite [A acquire]
fuse_finish_open
truncate_pagecache
lock_page [B acquire]
truncate_inode_page
unlock_page [B release]
fuse_release_nowrite [A release]
inode_unlock [C release]
----------------------------------------------------------------
open()
----------------------------------------------------------------
fuse_open_common
fuse_finish_open
invalidate_inode_pages2
lock_page [B acquire]
fuse_launder_page
fuse_wait_on_page_writeback [A acquire & release]
unlock_page [B release]
----------------------------------------------------------------
Besides this case, all calls of invalidate_inode_pages2() and
invalidate_inode_pages2_range() in fuse code also can deadlock with
open(O_TRUNC).
Fix by moving the truncate_pagecache() call outside the nowrite protected
region. The nowrite protection is only for delayed writeback
(writeback_cache) case, where inode lock does not protect against
truncation racing with writes on the server. Write syscalls racing with
page cache truncation still get the inode lock protection.
This patch also changes the order of filemap_invalidate_lock()
vs. fuse_set_nowrite() in fuse_open_common(). This new order matches the
order found in fuse_file_fallocate() and fuse_do_setattr().
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Tested-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Fixes: e4648309b8 ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A race between write(2) and close(2) allows pages to be dirtied after
fuse_flush -> write_inode_now(). If these pages are not flushed from
fuse_release(), then there might not be a writable open file later. So any
remaining dirty pages must be written back before the file is released.
This is a partial revert of the blamed commit.
Reported-by: syzbot+6e1efbd8efaaa6860e91@syzkaller.appspotmail.com
Fixes: 36ea23374d ("fuse: write inode in fuse_vma_close() instead of fuse_release()")
Cc: <stable@vger.kernel.org> # v5.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
New helper to be used instead of direct checks for IOCB_DSYNC:
iocb_is_dsync(iocb). Checks converted, which allows to avoid
the IS_SYNC(iocb->ki_filp->f_mapping->host) part (4 cache lines)
from iocb_flags() - it's checked in iocb_is_dsync() instead
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFPcQAKCRDfioYZHlFs
Z9A3AQCdfoT5sY3OK+I/3oTvJ//6lw2MtXrnXFM046ICKPi9sgD8CzR9mRAHA+vj
kxOtJEU2bA9naninXGORsDUndiNkwQo=
=gVIn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is a "weak" conversion which converts straight back to using pages.
A full conversion should be performed at some point, hopefully by
someone familiar with the filesystem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
There are no more aop flags left, so remove the parameter.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
