 85fdd74ff0
			
		
	
	
		85fdd74ff0
		
	
	
	
	
		
			
			The NPCM730 and NPCM750 SoCs have three timer modules each holding five timers and some shared registers (e.g. interrupt status). Each timer runs at 25 MHz divided by a prescaler, and counts down from a configurable initial value to zero. When zero is reached, the interrupt flag for the timer is set, and the timer is disabled (one-shot mode) or reloaded from its initial value (periodic mode). This implementation is sufficient to boot a Linux kernel configured for NPCM750. Note that the kernel does not seem to actually turn on the interrupts. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-4-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
		
			
				
	
	
		
			544 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			544 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Nuvoton NPCM7xx Timer Controller
 | |
|  *
 | |
|  * Copyright 2020 Google LLC
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms of the GNU General Public License as published by the
 | |
|  * Free Software Foundation; either version 2 of the License, or
 | |
|  * (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but WITHOUT
 | |
|  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 | |
|  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
 | |
|  * for more details.
 | |
|  */
 | |
| 
 | |
| #include "qemu/osdep.h"
 | |
| 
 | |
| #include "hw/irq.h"
 | |
| #include "hw/misc/npcm7xx_clk.h"
 | |
| #include "hw/timer/npcm7xx_timer.h"
 | |
| #include "migration/vmstate.h"
 | |
| #include "qemu/bitops.h"
 | |
| #include "qemu/error-report.h"
 | |
| #include "qemu/log.h"
 | |
| #include "qemu/module.h"
 | |
| #include "qemu/timer.h"
 | |
| #include "qemu/units.h"
 | |
| #include "trace.h"
 | |
| 
 | |
| /* 32-bit register indices. */
 | |
| enum NPCM7xxTimerRegisters {
 | |
|     NPCM7XX_TIMER_TCSR0,
 | |
|     NPCM7XX_TIMER_TCSR1,
 | |
|     NPCM7XX_TIMER_TICR0,
 | |
|     NPCM7XX_TIMER_TICR1,
 | |
|     NPCM7XX_TIMER_TDR0,
 | |
|     NPCM7XX_TIMER_TDR1,
 | |
|     NPCM7XX_TIMER_TISR,
 | |
|     NPCM7XX_TIMER_WTCR,
 | |
|     NPCM7XX_TIMER_TCSR2,
 | |
|     NPCM7XX_TIMER_TCSR3,
 | |
|     NPCM7XX_TIMER_TICR2,
 | |
|     NPCM7XX_TIMER_TICR3,
 | |
|     NPCM7XX_TIMER_TDR2,
 | |
|     NPCM7XX_TIMER_TDR3,
 | |
|     NPCM7XX_TIMER_TCSR4         = 0x0040 / sizeof(uint32_t),
 | |
|     NPCM7XX_TIMER_TICR4         = 0x0048 / sizeof(uint32_t),
 | |
|     NPCM7XX_TIMER_TDR4          = 0x0050 / sizeof(uint32_t),
 | |
|     NPCM7XX_TIMER_REGS_END,
 | |
| };
 | |
| 
 | |
| /* Register field definitions. */
 | |
| #define NPCM7XX_TCSR_CEN                BIT(30)
 | |
| #define NPCM7XX_TCSR_IE                 BIT(29)
 | |
| #define NPCM7XX_TCSR_PERIODIC           BIT(27)
 | |
| #define NPCM7XX_TCSR_CRST               BIT(26)
 | |
| #define NPCM7XX_TCSR_CACT               BIT(25)
 | |
| #define NPCM7XX_TCSR_RSVD               0x01ffff00
 | |
| #define NPCM7XX_TCSR_PRESCALE_START     0
 | |
| #define NPCM7XX_TCSR_PRESCALE_LEN       8
 | |
| 
 | |
| /*
 | |
|  * Returns the index of timer in the tc->timer array. This can be used to
 | |
|  * locate the registers that belong to this timer.
 | |
|  */
 | |
| static int npcm7xx_timer_index(NPCM7xxTimerCtrlState *tc, NPCM7xxTimer *timer)
 | |
| {
 | |
|     int index = timer - tc->timer;
 | |
| 
 | |
|     g_assert(index >= 0 && index < NPCM7XX_TIMERS_PER_CTRL);
 | |
| 
 | |
|     return index;
 | |
| }
 | |
| 
 | |
| /* Return the value by which to divide the reference clock rate. */
 | |
| static uint32_t npcm7xx_tcsr_prescaler(uint32_t tcsr)
 | |
| {
 | |
|     return extract32(tcsr, NPCM7XX_TCSR_PRESCALE_START,
 | |
|                      NPCM7XX_TCSR_PRESCALE_LEN) + 1;
 | |
| }
 | |
| 
 | |
| /* Convert a timer cycle count to a time interval in nanoseconds. */
 | |
| static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count)
 | |
| {
 | |
|     int64_t ns = count;
 | |
| 
 | |
|     ns *= NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ;
 | |
|     ns *= npcm7xx_tcsr_prescaler(t->tcsr);
 | |
| 
 | |
|     return ns;
 | |
| }
 | |
| 
 | |
| /* Convert a time interval in nanoseconds to a timer cycle count. */
 | |
| static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns)
 | |
| {
 | |
|     int64_t count;
 | |
| 
 | |
|     count = ns / (NANOSECONDS_PER_SECOND / NPCM7XX_TIMER_REF_HZ);
 | |
|     count /= npcm7xx_tcsr_prescaler(t->tcsr);
 | |
| 
 | |
|     return count;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Raise the interrupt line if there's a pending interrupt and interrupts are
 | |
|  * enabled for this timer. If not, lower it.
 | |
|  */
 | |
| static void npcm7xx_timer_check_interrupt(NPCM7xxTimer *t)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *tc = t->ctrl;
 | |
|     int index = npcm7xx_timer_index(tc, t);
 | |
|     bool pending = (t->tcsr & NPCM7XX_TCSR_IE) && (tc->tisr & BIT(index));
 | |
| 
 | |
|     qemu_set_irq(t->irq, pending);
 | |
|     trace_npcm7xx_timer_irq(DEVICE(tc)->canonical_path, index, pending);
 | |
| }
 | |
| 
 | |
| /* Start or resume the timer. */
 | |
| static void npcm7xx_timer_start(NPCM7xxTimer *t)
 | |
| {
 | |
|     int64_t now;
 | |
| 
 | |
|     now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 | |
|     t->expires_ns = now + t->remaining_ns;
 | |
|     timer_mod(&t->qtimer, t->expires_ns);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Called when the counter reaches zero. Sets the interrupt flag, and either
 | |
|  * restarts or disables the timer.
 | |
|  */
 | |
| static void npcm7xx_timer_reached_zero(NPCM7xxTimer *t)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *tc = t->ctrl;
 | |
|     int index = npcm7xx_timer_index(tc, t);
 | |
| 
 | |
|     tc->tisr |= BIT(index);
 | |
| 
 | |
|     if (t->tcsr & NPCM7XX_TCSR_PERIODIC) {
 | |
|         t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
 | |
|         if (t->tcsr & NPCM7XX_TCSR_CEN) {
 | |
|             npcm7xx_timer_start(t);
 | |
|         }
 | |
|     } else {
 | |
|         t->tcsr &= ~(NPCM7XX_TCSR_CEN | NPCM7XX_TCSR_CACT);
 | |
|     }
 | |
| 
 | |
|     npcm7xx_timer_check_interrupt(t);
 | |
| }
 | |
| 
 | |
| /* Stop counting. Record the time remaining so we can continue later. */
 | |
| static void npcm7xx_timer_pause(NPCM7xxTimer *t)
 | |
| {
 | |
|     int64_t now;
 | |
| 
 | |
|     timer_del(&t->qtimer);
 | |
|     now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 | |
|     t->remaining_ns = t->expires_ns - now;
 | |
|     if (t->remaining_ns <= 0) {
 | |
|         npcm7xx_timer_reached_zero(t);
 | |
|     }
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Restart the timer from its initial value. If the timer was enabled and stays
 | |
|  * enabled, adjust the QEMU timer according to the new count. If the timer is
 | |
|  * transitioning from disabled to enabled, the caller is expected to start the
 | |
|  * timer later.
 | |
|  */
 | |
| static void npcm7xx_timer_restart(NPCM7xxTimer *t, uint32_t old_tcsr)
 | |
| {
 | |
|     t->remaining_ns = npcm7xx_timer_count_to_ns(t, t->ticr);
 | |
| 
 | |
|     if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) {
 | |
|         npcm7xx_timer_start(t);
 | |
|     }
 | |
| }
 | |
| 
 | |
| /* Register read and write handlers */
 | |
| 
 | |
| static uint32_t npcm7xx_timer_read_tdr(NPCM7xxTimer *t)
 | |
| {
 | |
|     if (t->tcsr & NPCM7XX_TCSR_CEN) {
 | |
|         int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 | |
| 
 | |
|         return npcm7xx_timer_ns_to_count(t, t->expires_ns - now);
 | |
|     }
 | |
| 
 | |
|     return npcm7xx_timer_ns_to_count(t, t->remaining_ns);
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_write_tcsr(NPCM7xxTimer *t, uint32_t new_tcsr)
 | |
| {
 | |
|     uint32_t old_tcsr = t->tcsr;
 | |
|     uint32_t tdr;
 | |
| 
 | |
|     if (new_tcsr & NPCM7XX_TCSR_RSVD) {
 | |
|         qemu_log_mask(LOG_GUEST_ERROR, "%s: reserved bits in 0x%08x ignored\n",
 | |
|                       __func__, new_tcsr);
 | |
|         new_tcsr &= ~NPCM7XX_TCSR_RSVD;
 | |
|     }
 | |
|     if (new_tcsr & NPCM7XX_TCSR_CACT) {
 | |
|         qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only bits in 0x%08x ignored\n",
 | |
|                       __func__, new_tcsr);
 | |
|         new_tcsr &= ~NPCM7XX_TCSR_CACT;
 | |
|     }
 | |
|     if ((new_tcsr & NPCM7XX_TCSR_CRST) && (new_tcsr & NPCM7XX_TCSR_CEN)) {
 | |
|         qemu_log_mask(LOG_GUEST_ERROR,
 | |
|                       "%s: both CRST and CEN set; ignoring CEN.\n",
 | |
|                       __func__);
 | |
|         new_tcsr &= ~NPCM7XX_TCSR_CEN;
 | |
|     }
 | |
| 
 | |
|     /* Calculate the value of TDR before potentially changing the prescaler. */
 | |
|     tdr = npcm7xx_timer_read_tdr(t);
 | |
| 
 | |
|     t->tcsr = (t->tcsr & NPCM7XX_TCSR_CACT) | new_tcsr;
 | |
| 
 | |
|     if (npcm7xx_tcsr_prescaler(old_tcsr) != npcm7xx_tcsr_prescaler(new_tcsr)) {
 | |
|         /* Recalculate time remaining based on the current TDR value. */
 | |
|         t->remaining_ns = npcm7xx_timer_count_to_ns(t, tdr);
 | |
|         if (old_tcsr & t->tcsr & NPCM7XX_TCSR_CEN) {
 | |
|             npcm7xx_timer_start(t);
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_IE) {
 | |
|         npcm7xx_timer_check_interrupt(t);
 | |
|     }
 | |
|     if (new_tcsr & NPCM7XX_TCSR_CRST) {
 | |
|         npcm7xx_timer_restart(t, old_tcsr);
 | |
|         t->tcsr &= ~NPCM7XX_TCSR_CRST;
 | |
|     }
 | |
|     if ((old_tcsr ^ new_tcsr) & NPCM7XX_TCSR_CEN) {
 | |
|         if (new_tcsr & NPCM7XX_TCSR_CEN) {
 | |
|             t->tcsr |= NPCM7XX_TCSR_CACT;
 | |
|             npcm7xx_timer_start(t);
 | |
|         } else {
 | |
|             t->tcsr &= ~NPCM7XX_TCSR_CACT;
 | |
|             npcm7xx_timer_pause(t);
 | |
|         }
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_write_ticr(NPCM7xxTimer *t, uint32_t new_ticr)
 | |
| {
 | |
|     t->ticr = new_ticr;
 | |
| 
 | |
|     npcm7xx_timer_restart(t, t->tcsr);
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_write_tisr(NPCM7xxTimerCtrlState *s, uint32_t value)
 | |
| {
 | |
|     int i;
 | |
| 
 | |
|     s->tisr &= ~value;
 | |
|     for (i = 0; i < ARRAY_SIZE(s->timer); i++) {
 | |
|         if (value & (1U << i)) {
 | |
|             npcm7xx_timer_check_interrupt(&s->timer[i]);
 | |
|         }
 | |
|     }
 | |
| }
 | |
| 
 | |
| static hwaddr npcm7xx_tcsr_index(hwaddr reg)
 | |
| {
 | |
|     switch (reg) {
 | |
|     case NPCM7XX_TIMER_TCSR0:
 | |
|         return 0;
 | |
|     case NPCM7XX_TIMER_TCSR1:
 | |
|         return 1;
 | |
|     case NPCM7XX_TIMER_TCSR2:
 | |
|         return 2;
 | |
|     case NPCM7XX_TIMER_TCSR3:
 | |
|         return 3;
 | |
|     case NPCM7XX_TIMER_TCSR4:
 | |
|         return 4;
 | |
|     default:
 | |
|         g_assert_not_reached();
 | |
|     }
 | |
| }
 | |
| 
 | |
| static hwaddr npcm7xx_ticr_index(hwaddr reg)
 | |
| {
 | |
|     switch (reg) {
 | |
|     case NPCM7XX_TIMER_TICR0:
 | |
|         return 0;
 | |
|     case NPCM7XX_TIMER_TICR1:
 | |
|         return 1;
 | |
|     case NPCM7XX_TIMER_TICR2:
 | |
|         return 2;
 | |
|     case NPCM7XX_TIMER_TICR3:
 | |
|         return 3;
 | |
|     case NPCM7XX_TIMER_TICR4:
 | |
|         return 4;
 | |
|     default:
 | |
|         g_assert_not_reached();
 | |
|     }
 | |
| }
 | |
| 
 | |
| static hwaddr npcm7xx_tdr_index(hwaddr reg)
 | |
| {
 | |
|     switch (reg) {
 | |
|     case NPCM7XX_TIMER_TDR0:
 | |
|         return 0;
 | |
|     case NPCM7XX_TIMER_TDR1:
 | |
|         return 1;
 | |
|     case NPCM7XX_TIMER_TDR2:
 | |
|         return 2;
 | |
|     case NPCM7XX_TIMER_TDR3:
 | |
|         return 3;
 | |
|     case NPCM7XX_TIMER_TDR4:
 | |
|         return 4;
 | |
|     default:
 | |
|         g_assert_not_reached();
 | |
|     }
 | |
| }
 | |
| 
 | |
| static uint64_t npcm7xx_timer_read(void *opaque, hwaddr offset, unsigned size)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *s = opaque;
 | |
|     uint64_t value = 0;
 | |
|     hwaddr reg;
 | |
| 
 | |
|     reg = offset / sizeof(uint32_t);
 | |
|     switch (reg) {
 | |
|     case NPCM7XX_TIMER_TCSR0:
 | |
|     case NPCM7XX_TIMER_TCSR1:
 | |
|     case NPCM7XX_TIMER_TCSR2:
 | |
|     case NPCM7XX_TIMER_TCSR3:
 | |
|     case NPCM7XX_TIMER_TCSR4:
 | |
|         value = s->timer[npcm7xx_tcsr_index(reg)].tcsr;
 | |
|         break;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TICR0:
 | |
|     case NPCM7XX_TIMER_TICR1:
 | |
|     case NPCM7XX_TIMER_TICR2:
 | |
|     case NPCM7XX_TIMER_TICR3:
 | |
|     case NPCM7XX_TIMER_TICR4:
 | |
|         value = s->timer[npcm7xx_ticr_index(reg)].ticr;
 | |
|         break;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TDR0:
 | |
|     case NPCM7XX_TIMER_TDR1:
 | |
|     case NPCM7XX_TIMER_TDR2:
 | |
|     case NPCM7XX_TIMER_TDR3:
 | |
|     case NPCM7XX_TIMER_TDR4:
 | |
|         value = npcm7xx_timer_read_tdr(&s->timer[npcm7xx_tdr_index(reg)]);
 | |
|         break;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TISR:
 | |
|         value = s->tisr;
 | |
|         break;
 | |
| 
 | |
|     case NPCM7XX_TIMER_WTCR:
 | |
|         value = s->wtcr;
 | |
|         break;
 | |
| 
 | |
|     default:
 | |
|         qemu_log_mask(LOG_GUEST_ERROR,
 | |
|                       "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 | |
|                       __func__, offset);
 | |
|         break;
 | |
|     }
 | |
| 
 | |
|     trace_npcm7xx_timer_read(DEVICE(s)->canonical_path, offset, value);
 | |
| 
 | |
|     return value;
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_write(void *opaque, hwaddr offset,
 | |
|                                 uint64_t v, unsigned size)
 | |
| {
 | |
|     uint32_t reg = offset / sizeof(uint32_t);
 | |
|     NPCM7xxTimerCtrlState *s = opaque;
 | |
|     uint32_t value = v;
 | |
| 
 | |
|     trace_npcm7xx_timer_write(DEVICE(s)->canonical_path, offset, value);
 | |
| 
 | |
|     switch (reg) {
 | |
|     case NPCM7XX_TIMER_TCSR0:
 | |
|     case NPCM7XX_TIMER_TCSR1:
 | |
|     case NPCM7XX_TIMER_TCSR2:
 | |
|     case NPCM7XX_TIMER_TCSR3:
 | |
|     case NPCM7XX_TIMER_TCSR4:
 | |
|         npcm7xx_timer_write_tcsr(&s->timer[npcm7xx_tcsr_index(reg)], value);
 | |
|         return;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TICR0:
 | |
|     case NPCM7XX_TIMER_TICR1:
 | |
|     case NPCM7XX_TIMER_TICR2:
 | |
|     case NPCM7XX_TIMER_TICR3:
 | |
|     case NPCM7XX_TIMER_TICR4:
 | |
|         npcm7xx_timer_write_ticr(&s->timer[npcm7xx_ticr_index(reg)], value);
 | |
|         return;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TDR0:
 | |
|     case NPCM7XX_TIMER_TDR1:
 | |
|     case NPCM7XX_TIMER_TDR2:
 | |
|     case NPCM7XX_TIMER_TDR3:
 | |
|     case NPCM7XX_TIMER_TDR4:
 | |
|         qemu_log_mask(LOG_GUEST_ERROR,
 | |
|                       "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n",
 | |
|                       __func__, offset);
 | |
|         return;
 | |
| 
 | |
|     case NPCM7XX_TIMER_TISR:
 | |
|         npcm7xx_timer_write_tisr(s, value);
 | |
|         return;
 | |
| 
 | |
|     case NPCM7XX_TIMER_WTCR:
 | |
|         qemu_log_mask(LOG_UNIMP, "%s: WTCR write not implemented: 0x%08x\n",
 | |
|                       __func__, value);
 | |
|         return;
 | |
|     }
 | |
| 
 | |
|     qemu_log_mask(LOG_GUEST_ERROR,
 | |
|                   "%s: invalid offset 0x%04" HWADDR_PRIx "\n",
 | |
|                   __func__, offset);
 | |
| }
 | |
| 
 | |
| static const struct MemoryRegionOps npcm7xx_timer_ops = {
 | |
|     .read       = npcm7xx_timer_read,
 | |
|     .write      = npcm7xx_timer_write,
 | |
|     .endianness = DEVICE_LITTLE_ENDIAN,
 | |
|     .valid      = {
 | |
|         .min_access_size        = 4,
 | |
|         .max_access_size        = 4,
 | |
|         .unaligned              = false,
 | |
|     },
 | |
| };
 | |
| 
 | |
| /* Called when the QEMU timer expires. */
 | |
| static void npcm7xx_timer_expired(void *opaque)
 | |
| {
 | |
|     NPCM7xxTimer *t = opaque;
 | |
| 
 | |
|     if (t->tcsr & NPCM7XX_TCSR_CEN) {
 | |
|         npcm7xx_timer_reached_zero(t);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_enter_reset(Object *obj, ResetType type)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
 | |
|     int i;
 | |
| 
 | |
|     for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
 | |
|         NPCM7xxTimer *t = &s->timer[i];
 | |
| 
 | |
|         timer_del(&t->qtimer);
 | |
|         t->expires_ns = 0;
 | |
|         t->remaining_ns = 0;
 | |
|         t->tcsr = 0x00000005;
 | |
|         t->ticr = 0x00000000;
 | |
|     }
 | |
| 
 | |
|     s->tisr = 0x00000000;
 | |
|     s->wtcr = 0x00000400;
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_hold_reset(Object *obj)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj);
 | |
|     int i;
 | |
| 
 | |
|     for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
 | |
|         qemu_irq_lower(s->timer[i].irq);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void npcm7xx_timer_realize(DeviceState *dev, Error **errp)
 | |
| {
 | |
|     NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(dev);
 | |
|     SysBusDevice *sbd = &s->parent;
 | |
|     int i;
 | |
| 
 | |
|     for (i = 0; i < NPCM7XX_TIMERS_PER_CTRL; i++) {
 | |
|         NPCM7xxTimer *t = &s->timer[i];
 | |
|         t->ctrl = s;
 | |
|         timer_init_ns(&t->qtimer, QEMU_CLOCK_VIRTUAL, npcm7xx_timer_expired, t);
 | |
|         sysbus_init_irq(sbd, &t->irq);
 | |
|     }
 | |
| 
 | |
|     memory_region_init_io(&s->iomem, OBJECT(s), &npcm7xx_timer_ops, s,
 | |
|                           TYPE_NPCM7XX_TIMER, 4 * KiB);
 | |
|     sysbus_init_mmio(sbd, &s->iomem);
 | |
| }
 | |
| 
 | |
| static const VMStateDescription vmstate_npcm7xx_timer = {
 | |
|     .name = "npcm7xx-timer",
 | |
|     .version_id = 0,
 | |
|     .minimum_version_id = 0,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_TIMER(qtimer, NPCM7xxTimer),
 | |
|         VMSTATE_INT64(expires_ns, NPCM7xxTimer),
 | |
|         VMSTATE_INT64(remaining_ns, NPCM7xxTimer),
 | |
|         VMSTATE_UINT32(tcsr, NPCM7xxTimer),
 | |
|         VMSTATE_UINT32(ticr, NPCM7xxTimer),
 | |
|         VMSTATE_END_OF_LIST(),
 | |
|     },
 | |
| };
 | |
| 
 | |
| static const VMStateDescription vmstate_npcm7xx_timer_ctrl = {
 | |
|     .name = "npcm7xx-timer-ctrl",
 | |
|     .version_id = 0,
 | |
|     .minimum_version_id = 0,
 | |
|     .fields = (VMStateField[]) {
 | |
|         VMSTATE_UINT32(tisr, NPCM7xxTimerCtrlState),
 | |
|         VMSTATE_UINT32(wtcr, NPCM7xxTimerCtrlState),
 | |
|         VMSTATE_STRUCT_ARRAY(timer, NPCM7xxTimerCtrlState,
 | |
|                              NPCM7XX_TIMERS_PER_CTRL, 0, vmstate_npcm7xx_timer,
 | |
|                              NPCM7xxTimer),
 | |
|         VMSTATE_END_OF_LIST(),
 | |
|     },
 | |
| };
 | |
| 
 | |
| static void npcm7xx_timer_class_init(ObjectClass *klass, void *data)
 | |
| {
 | |
|     ResettableClass *rc = RESETTABLE_CLASS(klass);
 | |
|     DeviceClass *dc = DEVICE_CLASS(klass);
 | |
| 
 | |
|     QEMU_BUILD_BUG_ON(NPCM7XX_TIMER_REGS_END > NPCM7XX_TIMER_NR_REGS);
 | |
| 
 | |
|     dc->desc = "NPCM7xx Timer Controller";
 | |
|     dc->realize = npcm7xx_timer_realize;
 | |
|     dc->vmsd = &vmstate_npcm7xx_timer_ctrl;
 | |
|     rc->phases.enter = npcm7xx_timer_enter_reset;
 | |
|     rc->phases.hold = npcm7xx_timer_hold_reset;
 | |
| }
 | |
| 
 | |
| static const TypeInfo npcm7xx_timer_info = {
 | |
|     .name               = TYPE_NPCM7XX_TIMER,
 | |
|     .parent             = TYPE_SYS_BUS_DEVICE,
 | |
|     .instance_size      = sizeof(NPCM7xxTimerCtrlState),
 | |
|     .class_init         = npcm7xx_timer_class_init,
 | |
| };
 | |
| 
 | |
| static void npcm7xx_timer_register_type(void)
 | |
| {
 | |
|     type_register_static(&npcm7xx_timer_info);
 | |
| }
 | |
| type_init(npcm7xx_timer_register_type);
 |