 732612856a
			
		
	
	
		732612856a
		
	
	
	
	
		
			
			There is already a MemMapEntry type defined in hwaddr.h. Let's drop the RISC-V defined `struct MemmapEntry` and use the existing one. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210220144807.819-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
		
			
				
	
	
		
			950 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			950 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * QEMU RISC-V Board Compatible with SiFive Freedom U SDK
 | |
|  *
 | |
|  * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
 | |
|  * Copyright (c) 2017 SiFive, Inc.
 | |
|  * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
 | |
|  *
 | |
|  * Provides a board compatible with the SiFive Freedom U SDK:
 | |
|  *
 | |
|  * 0) UART
 | |
|  * 1) CLINT (Core Level Interruptor)
 | |
|  * 2) PLIC (Platform Level Interrupt Controller)
 | |
|  * 3) PRCI (Power, Reset, Clock, Interrupt)
 | |
|  * 4) GPIO (General Purpose Input/Output Controller)
 | |
|  * 5) OTP (One-Time Programmable) memory with stored serial number
 | |
|  * 6) GEM (Gigabit Ethernet Controller) and management block
 | |
|  * 7) DMA (Direct Memory Access Controller)
 | |
|  * 8) SPI0 connected to an SPI flash
 | |
|  * 9) SPI2 connected to an SD card
 | |
|  *
 | |
|  * This board currently generates devicetree dynamically that indicates at least
 | |
|  * two harts and up to five harts.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms and conditions of the GNU General Public License,
 | |
|  * version 2 or later, as published by the Free Software Foundation.
 | |
|  *
 | |
|  * This program is distributed in the hope it will be useful, but WITHOUT
 | |
|  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 | |
|  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 | |
|  * more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License along with
 | |
|  * this program.  If not, see <http://www.gnu.org/licenses/>.
 | |
|  */
 | |
| 
 | |
| #include "qemu/osdep.h"
 | |
| #include "qemu/log.h"
 | |
| #include "qemu/error-report.h"
 | |
| #include "qapi/error.h"
 | |
| #include "qapi/visitor.h"
 | |
| #include "hw/boards.h"
 | |
| #include "hw/irq.h"
 | |
| #include "hw/loader.h"
 | |
| #include "hw/sysbus.h"
 | |
| #include "hw/char/serial.h"
 | |
| #include "hw/cpu/cluster.h"
 | |
| #include "hw/misc/unimp.h"
 | |
| #include "hw/ssi/ssi.h"
 | |
| #include "target/riscv/cpu.h"
 | |
| #include "hw/riscv/riscv_hart.h"
 | |
| #include "hw/riscv/sifive_u.h"
 | |
| #include "hw/riscv/boot.h"
 | |
| #include "hw/char/sifive_uart.h"
 | |
| #include "hw/intc/sifive_clint.h"
 | |
| #include "hw/intc/sifive_plic.h"
 | |
| #include "chardev/char.h"
 | |
| #include "net/eth.h"
 | |
| #include "sysemu/arch_init.h"
 | |
| #include "sysemu/device_tree.h"
 | |
| #include "sysemu/runstate.h"
 | |
| #include "sysemu/sysemu.h"
 | |
| 
 | |
| #include <libfdt.h>
 | |
| 
 | |
| static const MemMapEntry sifive_u_memmap[] = {
 | |
|     [SIFIVE_U_DEV_DEBUG] =    {        0x0,      0x100 },
 | |
|     [SIFIVE_U_DEV_MROM] =     {     0x1000,     0xf000 },
 | |
|     [SIFIVE_U_DEV_CLINT] =    {  0x2000000,    0x10000 },
 | |
|     [SIFIVE_U_DEV_L2CC] =     {  0x2010000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_PDMA] =     {  0x3000000,   0x100000 },
 | |
|     [SIFIVE_U_DEV_L2LIM] =    {  0x8000000,  0x2000000 },
 | |
|     [SIFIVE_U_DEV_PLIC] =     {  0xc000000,  0x4000000 },
 | |
|     [SIFIVE_U_DEV_PRCI] =     { 0x10000000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_UART0] =    { 0x10010000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_UART1] =    { 0x10011000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_QSPI0] =    { 0x10040000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_QSPI2] =    { 0x10050000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_GPIO] =     { 0x10060000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_OTP] =      { 0x10070000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_GEM] =      { 0x10090000,     0x2000 },
 | |
|     [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000,     0x1000 },
 | |
|     [SIFIVE_U_DEV_DMC] =      { 0x100b0000,    0x10000 },
 | |
|     [SIFIVE_U_DEV_FLASH0] =   { 0x20000000, 0x10000000 },
 | |
|     [SIFIVE_U_DEV_DRAM] =     { 0x80000000,        0x0 },
 | |
| };
 | |
| 
 | |
| #define OTP_SERIAL          1
 | |
| #define GEM_REVISION        0x10070109
 | |
| 
 | |
| static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
 | |
|                        uint64_t mem_size, const char *cmdline, bool is_32_bit)
 | |
| {
 | |
|     MachineState *ms = MACHINE(qdev_get_machine());
 | |
|     void *fdt;
 | |
|     int cpu;
 | |
|     uint32_t *cells;
 | |
|     char *nodename;
 | |
|     char ethclk_names[] = "pclk\0hclk";
 | |
|     uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
 | |
|     uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
 | |
| 
 | |
|     if (ms->dtb) {
 | |
|         fdt = s->fdt = load_device_tree(ms->dtb, &s->fdt_size);
 | |
|         if (!fdt) {
 | |
|             error_report("load_device_tree() failed");
 | |
|             exit(1);
 | |
|         }
 | |
|         goto update_bootargs;
 | |
|     } else {
 | |
|         fdt = s->fdt = create_device_tree(&s->fdt_size);
 | |
|         if (!fdt) {
 | |
|             error_report("create_device_tree() failed");
 | |
|             exit(1);
 | |
|         }
 | |
|     }
 | |
| 
 | |
|     qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
 | |
|     qemu_fdt_setprop_string(fdt, "/", "compatible",
 | |
|                             "sifive,hifive-unleashed-a00");
 | |
|     qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
 | |
|     qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
 | |
| 
 | |
|     qemu_fdt_add_subnode(fdt, "/soc");
 | |
|     qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
 | |
|     qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
 | |
|     qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
 | |
|     qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
 | |
| 
 | |
|     hfclk_phandle = phandle++;
 | |
|     nodename = g_strdup_printf("/hfclk");
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
 | |
|         SIFIVE_U_HFCLK_FREQ);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     rtcclk_phandle = phandle++;
 | |
|     nodename = g_strdup_printf("/rtcclk");
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
 | |
|         SIFIVE_U_RTCCLK_FREQ);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/memory@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_DRAM].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base,
 | |
|         mem_size >> 32, mem_size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     qemu_fdt_add_subnode(fdt, "/cpus");
 | |
|     qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
 | |
|         SIFIVE_CLINT_TIMEBASE_FREQ);
 | |
|     qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
 | |
|     qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
 | |
| 
 | |
|     for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
 | |
|         int cpu_phandle = phandle++;
 | |
|         nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
 | |
|         char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
 | |
|         char *isa;
 | |
|         qemu_fdt_add_subnode(fdt, nodename);
 | |
|         /* cpu 0 is the management hart that does not have mmu */
 | |
|         if (cpu != 0) {
 | |
|             if (is_32_bit) {
 | |
|                 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
 | |
|             } else {
 | |
|                 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
 | |
|             }
 | |
|             isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
 | |
|         } else {
 | |
|             isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
 | |
|         }
 | |
|         qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
 | |
|         qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
 | |
|         qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
 | |
|         qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
 | |
|         qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
 | |
|         qemu_fdt_add_subnode(fdt, intc);
 | |
|         qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
 | |
|         qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
 | |
|         qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
 | |
|         qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
 | |
|         g_free(isa);
 | |
|         g_free(intc);
 | |
|         g_free(nodename);
 | |
|     }
 | |
| 
 | |
|     cells =  g_new0(uint32_t, ms->smp.cpus * 4);
 | |
|     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
 | |
|         nodename =
 | |
|             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
 | |
|         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
 | |
|         cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
 | |
|         cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
 | |
|         cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
 | |
|         cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
 | |
|         g_free(nodename);
 | |
|     }
 | |
|     nodename = g_strdup_printf("/soc/clint@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_CLINT].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0");
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_CLINT].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_CLINT].size);
 | |
|     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
 | |
|         cells, ms->smp.cpus * sizeof(uint32_t) * 4);
 | |
|     g_free(cells);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/otp@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_OTP].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_OTP].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_OTP].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible",
 | |
|         "sifive,fu540-c000-otp");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     prci_phandle = phandle++;
 | |
|     nodename = g_strdup_printf("/soc/clock-controller@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_PRCI].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         hfclk_phandle, rtcclk_phandle);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_PRCI].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_PRCI].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible",
 | |
|         "sifive,fu540-c000-prci");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     plic_phandle = phandle++;
 | |
|     cells =  g_new0(uint32_t, ms->smp.cpus * 4 - 2);
 | |
|     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
 | |
|         nodename =
 | |
|             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
 | |
|         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
 | |
|         /* cpu 0 is the management hart that does not have S-mode */
 | |
|         if (cpu == 0) {
 | |
|             cells[0] = cpu_to_be32(intc_phandle);
 | |
|             cells[1] = cpu_to_be32(IRQ_M_EXT);
 | |
|         } else {
 | |
|             cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
 | |
|             cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
 | |
|             cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
 | |
|             cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
 | |
|         }
 | |
|         g_free(nodename);
 | |
|     }
 | |
|     nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_PLIC].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0");
 | |
|     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
 | |
|     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
 | |
|         cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_PLIC].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_PLIC].size);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
 | |
|     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
 | |
|     g_free(cells);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     gpio_phandle = phandle++;
 | |
|     nodename = g_strdup_printf("/soc/gpio@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_GPIO].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_TLCLK);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2);
 | |
|     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2);
 | |
|     qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_GPIO].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_GPIO].size);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0,
 | |
|         SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3,
 | |
|         SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6,
 | |
|         SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9,
 | |
|         SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12,
 | |
|         SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/gpio-restart");
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/dma@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_PDMA].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
 | |
|         SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2,
 | |
|         SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5,
 | |
|         SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_PDMA].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_PDMA].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible",
 | |
|                             "sifive,fu540-c000-pdma");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/cache-controller@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_L2CC].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_L2CC].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_L2CC].size);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
 | |
|         SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible",
 | |
|                             "sifive,fu540-c000-ccache");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/spi@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_QSPI2].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_TLCLK);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
 | |
|         (long)memmap[SIFIVE_U_DEV_QSPI2].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/spi@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_QSPI0].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_TLCLK);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_QSPI0].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_QSPI0].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/spi@%lx/flash@0",
 | |
|         (long)memmap[SIFIVE_U_DEV_QSPI0].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4);
 | |
|     qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor");
 | |
|     g_free(nodename);
 | |
| 
 | |
|     phy_phandle = phandle++;
 | |
|     nodename = g_strdup_printf("/soc/ethernet@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_GEM].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible",
 | |
|         "sifive,fu540-c000-gem");
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_GEM].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_GEM].size,
 | |
|         0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
 | |
|     qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names,
 | |
|         sizeof(ethclk_names));
 | |
|     qemu_fdt_setprop(fdt, nodename, "local-mac-address",
 | |
|         s->soc.gem.conf.macaddr.a, ETH_ALEN);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
 | |
| 
 | |
|     qemu_fdt_add_subnode(fdt, "/aliases");
 | |
|     qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename);
 | |
| 
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
 | |
|         (long)memmap[SIFIVE_U_DEV_GEM].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/serial@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_UART1].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_UART1].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_UART1].size);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_TLCLK);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ);
 | |
| 
 | |
|     qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename);
 | |
|     g_free(nodename);
 | |
| 
 | |
|     nodename = g_strdup_printf("/soc/serial@%lx",
 | |
|         (long)memmap[SIFIVE_U_DEV_UART0].base);
 | |
|     qemu_fdt_add_subnode(fdt, nodename);
 | |
|     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "reg",
 | |
|         0x0, memmap[SIFIVE_U_DEV_UART0].base,
 | |
|         0x0, memmap[SIFIVE_U_DEV_UART0].size);
 | |
|     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
 | |
|         prci_phandle, PRCI_CLK_TLCLK);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
 | |
|     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
 | |
| 
 | |
|     qemu_fdt_add_subnode(fdt, "/chosen");
 | |
|     qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
 | |
|     qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
 | |
| 
 | |
|     g_free(nodename);
 | |
| 
 | |
| update_bootargs:
 | |
|     if (cmdline) {
 | |
|         qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_reset(void *opaque, int n, int level)
 | |
| {
 | |
|     /* gpio pin active low triggers reset */
 | |
|     if (!level) {
 | |
|         qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
 | |
|     }
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_init(MachineState *machine)
 | |
| {
 | |
|     const MemMapEntry *memmap = sifive_u_memmap;
 | |
|     SiFiveUState *s = RISCV_U_MACHINE(machine);
 | |
|     MemoryRegion *system_memory = get_system_memory();
 | |
|     MemoryRegion *main_mem = g_new(MemoryRegion, 1);
 | |
|     MemoryRegion *flash0 = g_new(MemoryRegion, 1);
 | |
|     target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
 | |
|     target_ulong firmware_end_addr, kernel_start_addr;
 | |
|     uint32_t start_addr_hi32 = 0x00000000;
 | |
|     int i;
 | |
|     uint32_t fdt_load_addr;
 | |
|     uint64_t kernel_entry;
 | |
|     DriveInfo *dinfo;
 | |
|     DeviceState *flash_dev, *sd_dev;
 | |
|     qemu_irq flash_cs, sd_cs;
 | |
| 
 | |
|     /* Initialize SoC */
 | |
|     object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
 | |
|     object_property_set_uint(OBJECT(&s->soc), "serial", s->serial,
 | |
|                              &error_abort);
 | |
|     object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type,
 | |
|                              &error_abort);
 | |
|     qdev_realize(DEVICE(&s->soc), NULL, &error_abort);
 | |
| 
 | |
|     /* register RAM */
 | |
|     memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram",
 | |
|                            machine->ram_size, &error_fatal);
 | |
|     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base,
 | |
|                                 main_mem);
 | |
| 
 | |
|     /* register QSPI0 Flash */
 | |
|     memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0",
 | |
|                            memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal);
 | |
|     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base,
 | |
|                                 flash0);
 | |
| 
 | |
|     /* register gpio-restart */
 | |
|     qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10,
 | |
|                           qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
 | |
| 
 | |
|     /* create device tree */
 | |
|     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
 | |
|                riscv_is_32bit(&s->soc.u_cpus));
 | |
| 
 | |
|     if (s->start_in_flash) {
 | |
|         /*
 | |
|          * If start_in_flash property is given, assign s->msel to a value
 | |
|          * that representing booting from QSPI0 memory-mapped flash.
 | |
|          *
 | |
|          * This also means that when both start_in_flash and msel properties
 | |
|          * are given, start_in_flash takes the precedence over msel.
 | |
|          *
 | |
|          * Note this is to keep backward compatibility not to break existing
 | |
|          * users that use start_in_flash property.
 | |
|          */
 | |
|         s->msel = MSEL_MEMMAP_QSPI0_FLASH;
 | |
|     }
 | |
| 
 | |
|     switch (s->msel) {
 | |
|     case MSEL_MEMMAP_QSPI0_FLASH:
 | |
|         start_addr = memmap[SIFIVE_U_DEV_FLASH0].base;
 | |
|         break;
 | |
|     case MSEL_L2LIM_QSPI0_FLASH:
 | |
|     case MSEL_L2LIM_QSPI2_SD:
 | |
|         start_addr = memmap[SIFIVE_U_DEV_L2LIM].base;
 | |
|         break;
 | |
|     default:
 | |
|         start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
 | |
|         break;
 | |
|     }
 | |
| 
 | |
|     if (riscv_is_32bit(&s->soc.u_cpus)) {
 | |
|         firmware_end_addr = riscv_find_and_load_firmware(machine,
 | |
|                                     "opensbi-riscv32-generic-fw_dynamic.bin",
 | |
|                                     start_addr, NULL);
 | |
|     } else {
 | |
|         firmware_end_addr = riscv_find_and_load_firmware(machine,
 | |
|                                     "opensbi-riscv64-generic-fw_dynamic.bin",
 | |
|                                     start_addr, NULL);
 | |
|     }
 | |
| 
 | |
|     if (machine->kernel_filename) {
 | |
|         kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
 | |
|                                                          firmware_end_addr);
 | |
| 
 | |
|         kernel_entry = riscv_load_kernel(machine->kernel_filename,
 | |
|                                          kernel_start_addr, NULL);
 | |
| 
 | |
|         if (machine->initrd_filename) {
 | |
|             hwaddr start;
 | |
|             hwaddr end = riscv_load_initrd(machine->initrd_filename,
 | |
|                                            machine->ram_size, kernel_entry,
 | |
|                                            &start);
 | |
|             qemu_fdt_setprop_cell(s->fdt, "/chosen",
 | |
|                                   "linux,initrd-start", start);
 | |
|             qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end",
 | |
|                                   end);
 | |
|         }
 | |
|     } else {
 | |
|        /*
 | |
|         * If dynamic firmware is used, it doesn't know where is the next mode
 | |
|         * if kernel argument is not set.
 | |
|         */
 | |
|         kernel_entry = 0;
 | |
|     }
 | |
| 
 | |
|     /* Compute the fdt load address in dram */
 | |
|     fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base,
 | |
|                                    machine->ram_size, s->fdt);
 | |
|     if (!riscv_is_32bit(&s->soc.u_cpus)) {
 | |
|         start_addr_hi32 = (uint64_t)start_addr >> 32;
 | |
|     }
 | |
| 
 | |
|     /* reset vector */
 | |
|     uint32_t reset_vec[11] = {
 | |
|         s->msel,                       /* MSEL pin state */
 | |
|         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
 | |
|         0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
 | |
|         0xf1402573,                    /*     csrr   a0, mhartid  */
 | |
|         0,
 | |
|         0,
 | |
|         0x00028067,                    /*     jr     t0 */
 | |
|         start_addr,                    /* start: .dword */
 | |
|         start_addr_hi32,
 | |
|         fdt_load_addr,                 /* fdt_laddr: .dword */
 | |
|         0x00000000,
 | |
|                                        /* fw_dyn: */
 | |
|     };
 | |
|     if (riscv_is_32bit(&s->soc.u_cpus)) {
 | |
|         reset_vec[4] = 0x0202a583;     /*     lw     a1, 32(t0) */
 | |
|         reset_vec[5] = 0x0182a283;     /*     lw     t0, 24(t0) */
 | |
|     } else {
 | |
|         reset_vec[4] = 0x0202b583;     /*     ld     a1, 32(t0) */
 | |
|         reset_vec[5] = 0x0182b283;     /*     ld     t0, 24(t0) */
 | |
|     }
 | |
| 
 | |
| 
 | |
|     /* copy in the reset vector in little_endian byte order */
 | |
|     for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
 | |
|         reset_vec[i] = cpu_to_le32(reset_vec[i]);
 | |
|     }
 | |
|     rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
 | |
|                           memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
 | |
| 
 | |
|     riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
 | |
|                                  memmap[SIFIVE_U_DEV_MROM].size,
 | |
|                                  sizeof(reset_vec), kernel_entry);
 | |
| 
 | |
|     /* Connect an SPI flash to SPI0 */
 | |
|     flash_dev = qdev_new("is25wp256");
 | |
|     dinfo = drive_get_next(IF_MTD);
 | |
|     if (dinfo) {
 | |
|         qdev_prop_set_drive_err(flash_dev, "drive",
 | |
|                                 blk_by_legacy_dinfo(dinfo),
 | |
|                                 &error_fatal);
 | |
|     }
 | |
|     qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal);
 | |
| 
 | |
|     flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
 | |
|     sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
 | |
| 
 | |
|     /* Connect an SD card to SPI2 */
 | |
|     sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
 | |
| 
 | |
|     sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
 | |
|     sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
 | |
| }
 | |
| 
 | |
| static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
 | |
| {
 | |
|     SiFiveUState *s = RISCV_U_MACHINE(obj);
 | |
| 
 | |
|     return s->start_in_flash;
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp)
 | |
| {
 | |
|     SiFiveUState *s = RISCV_U_MACHINE(obj);
 | |
| 
 | |
|     s->start_in_flash = value;
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_get_uint32_prop(Object *obj, Visitor *v,
 | |
|                                              const char *name, void *opaque,
 | |
|                                              Error **errp)
 | |
| {
 | |
|     visit_type_uint32(v, name, (uint32_t *)opaque, errp);
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_set_uint32_prop(Object *obj, Visitor *v,
 | |
|                                              const char *name, void *opaque,
 | |
|                                              Error **errp)
 | |
| {
 | |
|     visit_type_uint32(v, name, (uint32_t *)opaque, errp);
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_instance_init(Object *obj)
 | |
| {
 | |
|     SiFiveUState *s = RISCV_U_MACHINE(obj);
 | |
| 
 | |
|     s->start_in_flash = false;
 | |
|     s->msel = 0;
 | |
|     object_property_add(obj, "msel", "uint32",
 | |
|                         sifive_u_machine_get_uint32_prop,
 | |
|                         sifive_u_machine_set_uint32_prop, NULL, &s->msel);
 | |
|     object_property_set_description(obj, "msel",
 | |
|                                     "Mode Select (MSEL[3:0]) pin state");
 | |
| 
 | |
|     s->serial = OTP_SERIAL;
 | |
|     object_property_add(obj, "serial", "uint32",
 | |
|                         sifive_u_machine_get_uint32_prop,
 | |
|                         sifive_u_machine_set_uint32_prop, NULL, &s->serial);
 | |
|     object_property_set_description(obj, "serial", "Board serial number");
 | |
| }
 | |
| 
 | |
| static void sifive_u_machine_class_init(ObjectClass *oc, void *data)
 | |
| {
 | |
|     MachineClass *mc = MACHINE_CLASS(oc);
 | |
| 
 | |
|     mc->desc = "RISC-V Board compatible with SiFive U SDK";
 | |
|     mc->init = sifive_u_machine_init;
 | |
|     mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
 | |
|     mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
 | |
|     mc->default_cpu_type = SIFIVE_U_CPU;
 | |
|     mc->default_cpus = mc->min_cpus;
 | |
| 
 | |
|     object_class_property_add_bool(oc, "start-in-flash",
 | |
|                                    sifive_u_machine_get_start_in_flash,
 | |
|                                    sifive_u_machine_set_start_in_flash);
 | |
|     object_class_property_set_description(oc, "start-in-flash",
 | |
|                                           "Set on to tell QEMU's ROM to jump to "
 | |
|                                           "flash. Otherwise QEMU will jump to DRAM "
 | |
|                                           "or L2LIM depending on the msel value");
 | |
| }
 | |
| 
 | |
| static const TypeInfo sifive_u_machine_typeinfo = {
 | |
|     .name       = MACHINE_TYPE_NAME("sifive_u"),
 | |
|     .parent     = TYPE_MACHINE,
 | |
|     .class_init = sifive_u_machine_class_init,
 | |
|     .instance_init = sifive_u_machine_instance_init,
 | |
|     .instance_size = sizeof(SiFiveUState),
 | |
| };
 | |
| 
 | |
| static void sifive_u_machine_init_register_types(void)
 | |
| {
 | |
|     type_register_static(&sifive_u_machine_typeinfo);
 | |
| }
 | |
| 
 | |
| type_init(sifive_u_machine_init_register_types)
 | |
| 
 | |
| static void sifive_u_soc_instance_init(Object *obj)
 | |
| {
 | |
|     SiFiveUSoCState *s = RISCV_U_SOC(obj);
 | |
| 
 | |
|     object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
 | |
|     qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
 | |
| 
 | |
|     object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
 | |
|                             TYPE_RISCV_HART_ARRAY);
 | |
|     qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
 | |
|     qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
 | |
|     qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU);
 | |
|     qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004);
 | |
| 
 | |
|     object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
 | |
|     qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
 | |
| 
 | |
|     object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
 | |
|                             TYPE_RISCV_HART_ARRAY);
 | |
| 
 | |
|     object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI);
 | |
|     object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP);
 | |
|     object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM);
 | |
|     object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
 | |
|     object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
 | |
|     object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
 | |
|     object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
 | |
| }
 | |
| 
 | |
| static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
 | |
| {
 | |
|     MachineState *ms = MACHINE(qdev_get_machine());
 | |
|     SiFiveUSoCState *s = RISCV_U_SOC(dev);
 | |
|     const MemMapEntry *memmap = sifive_u_memmap;
 | |
|     MemoryRegion *system_memory = get_system_memory();
 | |
|     MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
 | |
|     MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
 | |
|     char *plic_hart_config;
 | |
|     size_t plic_hart_config_len;
 | |
|     int i;
 | |
|     NICInfo *nd = &nd_table[0];
 | |
| 
 | |
|     qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
 | |
|     qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
 | |
|     qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type);
 | |
|     qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004);
 | |
| 
 | |
|     sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort);
 | |
|     sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort);
 | |
|     /*
 | |
|      * The cluster must be realized after the RISC-V hart array container,
 | |
|      * as the container's CPU object is only created on realize, and the
 | |
|      * CPU must exist and have been parented into the cluster before the
 | |
|      * cluster is realized.
 | |
|      */
 | |
|     qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
 | |
|     qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
 | |
| 
 | |
|     /* boot rom */
 | |
|     memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom",
 | |
|                            memmap[SIFIVE_U_DEV_MROM].size, &error_fatal);
 | |
|     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base,
 | |
|                                 mask_rom);
 | |
| 
 | |
|     /*
 | |
|      * Add L2-LIM at reset size.
 | |
|      * This should be reduced in size as the L2 Cache Controller WayEnable
 | |
|      * register is incremented. Unfortunately I don't see a nice (or any) way
 | |
|      * to handle reducing or blocking out the L2 LIM while still allowing it
 | |
|      * be re returned to all enabled after a reset. For the time being, just
 | |
|      * leave it enabled all the time. This won't break anything, but will be
 | |
|      * too generous to misbehaving guests.
 | |
|      */
 | |
|     memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim",
 | |
|                            memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal);
 | |
|     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base,
 | |
|                                 l2lim_mem);
 | |
| 
 | |
|     /* create PLIC hart topology configuration string */
 | |
|     plic_hart_config_len = (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1) *
 | |
|                            ms->smp.cpus;
 | |
|     plic_hart_config = g_malloc0(plic_hart_config_len);
 | |
|     for (i = 0; i < ms->smp.cpus; i++) {
 | |
|         if (i != 0) {
 | |
|             strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG,
 | |
|                     plic_hart_config_len);
 | |
|         } else {
 | |
|             strncat(plic_hart_config, "M", plic_hart_config_len);
 | |
|         }
 | |
|         plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1);
 | |
|     }
 | |
| 
 | |
|     /* MMIO */
 | |
|     s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base,
 | |
|         plic_hart_config, 0,
 | |
|         SIFIVE_U_PLIC_NUM_SOURCES,
 | |
|         SIFIVE_U_PLIC_NUM_PRIORITIES,
 | |
|         SIFIVE_U_PLIC_PRIORITY_BASE,
 | |
|         SIFIVE_U_PLIC_PENDING_BASE,
 | |
|         SIFIVE_U_PLIC_ENABLE_BASE,
 | |
|         SIFIVE_U_PLIC_ENABLE_STRIDE,
 | |
|         SIFIVE_U_PLIC_CONTEXT_BASE,
 | |
|         SIFIVE_U_PLIC_CONTEXT_STRIDE,
 | |
|         memmap[SIFIVE_U_DEV_PLIC].size);
 | |
|     g_free(plic_hart_config);
 | |
|     sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base,
 | |
|         serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
 | |
|     sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base,
 | |
|         serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
 | |
|     sifive_clint_create(memmap[SIFIVE_U_DEV_CLINT].base,
 | |
|         memmap[SIFIVE_U_DEV_CLINT].size, 0, ms->smp.cpus,
 | |
|         SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE,
 | |
|         SIFIVE_CLINT_TIMEBASE_FREQ, false);
 | |
| 
 | |
|     if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
 | |
|         return;
 | |
|     }
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base);
 | |
| 
 | |
|     qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16);
 | |
|     if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
 | |
|         return;
 | |
|     }
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base);
 | |
| 
 | |
|     /* Pass all GPIOs to the SOC layer so they are available to the board */
 | |
|     qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL);
 | |
| 
 | |
|     /* Connect GPIO interrupts to the PLIC */
 | |
|     for (i = 0; i < 16; i++) {
 | |
|         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i,
 | |
|                            qdev_get_gpio_in(DEVICE(s->plic),
 | |
|                                             SIFIVE_U_GPIO_IRQ0 + i));
 | |
|     }
 | |
| 
 | |
|     /* PDMA */
 | |
|     sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base);
 | |
| 
 | |
|     /* Connect PDMA interrupts to the PLIC */
 | |
|     for (i = 0; i < SIFIVE_PDMA_IRQS; i++) {
 | |
|         sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i,
 | |
|                            qdev_get_gpio_in(DEVICE(s->plic),
 | |
|                                             SIFIVE_U_PDMA_IRQ0 + i));
 | |
|     }
 | |
| 
 | |
|     qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial);
 | |
|     if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) {
 | |
|         return;
 | |
|     }
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base);
 | |
| 
 | |
|     /* FIXME use qdev NIC properties instead of nd_table[] */
 | |
|     if (nd->used) {
 | |
|         qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
 | |
|         qdev_set_nic_properties(DEVICE(&s->gem), nd);
 | |
|     }
 | |
|     object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION,
 | |
|                             &error_abort);
 | |
|     if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) {
 | |
|         return;
 | |
|     }
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base);
 | |
|     sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
 | |
|                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
 | |
| 
 | |
|     create_unimplemented_device("riscv.sifive.u.gem-mgmt",
 | |
|         memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
 | |
| 
 | |
|     create_unimplemented_device("riscv.sifive.u.dmc",
 | |
|         memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size);
 | |
| 
 | |
|     create_unimplemented_device("riscv.sifive.u.l2cc",
 | |
|         memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size);
 | |
| 
 | |
|     sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp);
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0,
 | |
|                     memmap[SIFIVE_U_DEV_QSPI0].base);
 | |
|     sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
 | |
|                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ));
 | |
|     sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
 | |
|     sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
 | |
|                     memmap[SIFIVE_U_DEV_QSPI2].base);
 | |
|     sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
 | |
|                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ));
 | |
| }
 | |
| 
 | |
| static Property sifive_u_soc_props[] = {
 | |
|     DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL),
 | |
|     DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type),
 | |
|     DEFINE_PROP_END_OF_LIST()
 | |
| };
 | |
| 
 | |
| static void sifive_u_soc_class_init(ObjectClass *oc, void *data)
 | |
| {
 | |
|     DeviceClass *dc = DEVICE_CLASS(oc);
 | |
| 
 | |
|     device_class_set_props(dc, sifive_u_soc_props);
 | |
|     dc->realize = sifive_u_soc_realize;
 | |
|     /* Reason: Uses serial_hds in realize function, thus can't be used twice */
 | |
|     dc->user_creatable = false;
 | |
| }
 | |
| 
 | |
| static const TypeInfo sifive_u_soc_type_info = {
 | |
|     .name = TYPE_RISCV_U_SOC,
 | |
|     .parent = TYPE_DEVICE,
 | |
|     .instance_size = sizeof(SiFiveUSoCState),
 | |
|     .instance_init = sifive_u_soc_instance_init,
 | |
|     .class_init = sifive_u_soc_class_init,
 | |
| };
 | |
| 
 | |
| static void sifive_u_soc_register_types(void)
 | |
| {
 | |
|     type_register_static(&sifive_u_soc_type_info);
 | |
| }
 | |
| 
 | |
| type_init(sifive_u_soc_register_types)
 |