SYS-OSS/FRET-qemu
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
FRET-qemu/hw/arm/mps3r.c
Philippe Mathieu-Daudé 32cad1ffb8 include: Rename sysemu/ -> system/ 
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.

Files renamed manually then mechanical change using sed tool.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
2024-12-20 17:44:56 +01:00

641 lines
24 KiB
C
Raw Blame History

/*
* Arm MPS3 board emulation for Cortex-R-based FPGA images.
* (For M-profile images see mps2.c and mps2tz.c.)
*
* Copyright (c) 2017 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or
* (at your option) any later version.
*/
/*
* The MPS3 is an FPGA based dev board. This file handles FPGA images
* which use the Cortex-R CPUs. We model these separately from the
* M-profile images, because on M-profile the FPGA image is based on
* a "Subsystem for Embedded" which is similar to an SoC, whereas
* the R-profile FPGA images don't have that abstraction layer.
*
* We model the following FPGA images here:
* "mps3-an536" -- dual Cortex-R52 as documented in Arm Application Note AN536
*
* Application Note AN536:
* https://developer.arm.com/documentation/dai0536/latest/
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "qapi/qmp/qlist.h"
#include "exec/address-spaces.h"
#include "cpu.h"
#include "system/system.h"
#include "hw/boards.h"
#include "hw/or-irq.h"
#include "hw/qdev-clock.h"
#include "hw/qdev-properties.h"
#include "hw/arm/boot.h"
#include "hw/arm/bsa.h"
#include "hw/char/cmsdk-apb-uart.h"
#include "hw/i2c/arm_sbcon_i2c.h"
#include "hw/intc/arm_gicv3.h"
#include "hw/misc/mps2-scc.h"
#include "hw/misc/mps2-fpgaio.h"
#include "hw/misc/unimp.h"
#include "hw/net/lan9118.h"
#include "hw/rtc/pl031.h"
#include "hw/ssi/pl022.h"
#include "hw/timer/cmsdk-apb-dualtimer.h"
#include "hw/watchdog/cmsdk-apb-watchdog.h"
/* Define the layout of RAM and ROM in a board */
typedef struct RAMInfo {
const char *name;
hwaddr base;
hwaddr size;
int mrindex; /* index into rams[]; -1 for the system RAM block */
int flags;
} RAMInfo;
/*
* The MPS3 DDR is 3GiB, but on a 32-bit host QEMU doesn't permit
* emulation of that much guest RAM, so artificially make it smaller.
*/
#if HOST_LONG_BITS == 32
#define MPS3_DDR_SIZE (1 * GiB)
#else
#define MPS3_DDR_SIZE (3 * GiB)
#endif
/*
* Flag values:
* IS_MAIN: this is the main machine RAM
* IS_ROM: this area is read-only
*/
#define IS_MAIN 1
#define IS_ROM 2
#define MPS3R_RAM_MAX 9
#define MPS3R_CPU_MAX 2
#define MPS3R_UART_MAX 4 /* shared UART count */
#define PERIPHBASE 0xf0000000
#define NUM_SPIS 96
typedef enum MPS3RFPGAType {
FPGA_AN536,
} MPS3RFPGAType;
struct MPS3RMachineClass {
MachineClass parent;
MPS3RFPGAType fpga_type;
const RAMInfo *raminfo;
hwaddr loader_start;
};
struct MPS3RMachineState {
MachineState parent;
struct arm_boot_info bootinfo;
MemoryRegion ram[MPS3R_RAM_MAX];
Object *cpu[MPS3R_CPU_MAX];
MemoryRegion cpu_sysmem[MPS3R_CPU_MAX];
MemoryRegion sysmem_alias[MPS3R_CPU_MAX];
MemoryRegion cpu_ram[MPS3R_CPU_MAX];
GICv3State gic;
/* per-CPU UARTs followed by the shared UARTs */
CMSDKAPBUART uart[MPS3R_CPU_MAX + MPS3R_UART_MAX];
OrIRQState cpu_uart_oflow[MPS3R_CPU_MAX];
OrIRQState uart_oflow;
CMSDKAPBWatchdog watchdog;
CMSDKAPBDualTimer dualtimer;
ArmSbconI2CState i2c[5];
PL022State spi[3];
MPS2SCC scc;
MPS2FPGAIO fpgaio;
UnimplementedDeviceState i2s_audio;
PL031State rtc;
Clock *clk;
};
#define TYPE_MPS3R_MACHINE "mps3r"
#define TYPE_MPS3R_AN536_MACHINE MACHINE_TYPE_NAME("mps3-an536")
OBJECT_DECLARE_TYPE(MPS3RMachineState, MPS3RMachineClass, MPS3R_MACHINE)
/*
* Main clock frequency CLK in Hz (50MHz). In the image there are also
* ACLK, MCLK, GPUCLK and PERIPHCLK at the same frequency; for our
* model we just roll them all into one.
*/
#define CLK_FRQ 50000000
static const RAMInfo an536_raminfo[] = {
{
.name = "ATCM",
.base = 0x00000000,
.size = 0x00008000,
.mrindex = 0,
}, {
/* We model the QSPI flash as simple ROM for now */
.name = "QSPI",
.base = 0x08000000,
.size = 0x00800000,
.flags = IS_ROM,
.mrindex = 1,
}, {
.name = "BRAM",
.base = 0x10000000,
.size = 0x00080000,
.mrindex = 2,
}, {
.name = "DDR",
.base = 0x20000000,
.size = MPS3_DDR_SIZE,
.mrindex = -1,
}, {
.name = "ATCM0",
.base = 0xee000000,
.size = 0x00008000,
.mrindex = 3,
}, {
.name = "BTCM0",
.base = 0xee100000,
.size = 0x00008000,
.mrindex = 4,
}, {
.name = "CTCM0",
.base = 0xee200000,
.size = 0x00008000,
.mrindex = 5,
}, {
.name = "ATCM1",
.base = 0xee400000,
.size = 0x00008000,
.mrindex = 6,
}, {
.name = "BTCM1",
.base = 0xee500000,
.size = 0x00008000,
.mrindex = 7,
}, {
.name = "CTCM1",
.base = 0xee600000,
.size = 0x00008000,
.mrindex = 8,
}, {
.name = NULL,
}
};
static const int an536_oscclk[] = {
24000000, /* 24MHz reference for RTC and timers */
50000000, /* 50MHz ACLK */
50000000, /* 50MHz MCLK */
50000000, /* 50MHz GPUCLK */
24576000, /* 24.576MHz AUDCLK */
23750000, /* 23.75MHz HDLCDCLK */
100000000, /* 100MHz DDR4_REF_CLK */
};
static MemoryRegion *mr_for_raminfo(MPS3RMachineState *mms,
const RAMInfo *raminfo)
{
/* Return an initialized MemoryRegion for the RAMInfo. */
MemoryRegion *ram;
if (raminfo->mrindex < 0) {
/* Means this RAMInfo is for QEMU's "system memory" */
MachineState *machine = MACHINE(mms);
assert(!(raminfo->flags & IS_ROM));
return machine->ram;
}
assert(raminfo->mrindex < MPS3R_RAM_MAX);
ram = &mms->ram[raminfo->mrindex];
memory_region_init_ram(ram, NULL, raminfo->name,
raminfo->size, &error_fatal);
if (raminfo->flags & IS_ROM) {
memory_region_set_readonly(ram, true);
}
return ram;
}
/*
* There is no defined secondary boot protocol for Linux for the AN536,
* because real hardware has a restriction that atomic operations between
* the two CPUs do not function correctly, and so true SMP is not
* possible. Therefore for cases where the user is directly booting
* a kernel, we treat the system as essentially uniprocessor, and
* put the secondary CPU into power-off state (as if the user on the
* real hardware had configured the secondary to be halted via the
* SCC config registers).
*
* Note that the default secondary boot code would not work here anyway
* as it assumes a GICv2, and we have a GICv3.
*/
static void mps3r_write_secondary_boot(ARMCPU *cpu,
const struct arm_boot_info *info)
{
/*
* Power the secondary CPU off. This means we don't need to write any
* boot code into guest memory. Note that the 'cpu' argument to this
* function is the primary CPU we passed to arm_load_kernel(), not
* the secondary. Loop around all the other CPUs, as the boot.c
* code does for the "disable secondaries if PSCI is enabled" case.
*/
for (CPUState *cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
if (cs != first_cpu) {
object_property_set_bool(OBJECT(cs), "start-powered-off", true,
&error_abort);
}
}
}
static void mps3r_secondary_cpu_reset(ARMCPU *cpu,
const struct arm_boot_info *info)
{
/* We don't need to do anything here because the CPU will be off */
}
static void create_gic(MPS3RMachineState *mms, MemoryRegion *sysmem)
{
MachineState *machine = MACHINE(mms);
DeviceState *gicdev;
QList *redist_region_count;
object_initialize_child(OBJECT(mms), "gic", &mms->gic, TYPE_ARM_GICV3);
gicdev = DEVICE(&mms->gic);
qdev_prop_set_uint32(gicdev, "num-cpu", machine->smp.cpus);
qdev_prop_set_uint32(gicdev, "num-irq", NUM_SPIS + GIC_INTERNAL);
redist_region_count = qlist_new();
qlist_append_int(redist_region_count, machine->smp.cpus);
qdev_prop_set_array(gicdev, "redist-region-count", redist_region_count);
object_property_set_link(OBJECT(&mms->gic), "sysmem",
OBJECT(sysmem), &error_fatal);
sysbus_realize(SYS_BUS_DEVICE(&mms->gic), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 0, PERIPHBASE);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->gic), 1, PERIPHBASE + 0x100000);
/*
* Wire the outputs from each CPU's generic timer and the GICv3
* maintenance interrupt signal to the appropriate GIC PPI inputs,
* and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
*/
for (int i = 0; i < machine->smp.cpus; i++) {
DeviceState *cpudev = DEVICE(mms->cpu[i]);
SysBusDevice *gicsbd = SYS_BUS_DEVICE(&mms->gic);
int intidbase = NUM_SPIS + i * GIC_INTERNAL;
int irq;
/*
* Mapping from the output timer irq lines from the CPU to the
* GIC PPI inputs used for this board. This isn't a BSA board,
* but it uses the standard convention for the PPI numbers.
*/
const int timer_irq[] = {
[GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
[GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
[GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
};
for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
qdev_connect_gpio_out(cpudev, irq,
qdev_get_gpio_in(gicdev,
intidbase + timer_irq[irq]));
}
qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0,
qdev_get_gpio_in(gicdev,
intidbase + ARCH_GIC_MAINT_IRQ));
qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
qdev_get_gpio_in(gicdev,
intidbase + VIRTUAL_PMU_IRQ));
sysbus_connect_irq(gicsbd, i,
qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
sysbus_connect_irq(gicsbd, i + machine->smp.cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
sysbus_connect_irq(gicsbd, i + 2 * machine->smp.cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
sysbus_connect_irq(gicsbd, i + 3 * machine->smp.cpus,
qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
}
}
/*
* Create UART uartno, and map it into the MemoryRegion mem at address baseaddr.
* The qemu_irq arguments are where we connect the various IRQs from the UART.
*/
static void create_uart(MPS3RMachineState *mms, int uartno, MemoryRegion *mem,
hwaddr baseaddr, qemu_irq txirq, qemu_irq rxirq,
qemu_irq txoverirq, qemu_irq rxoverirq,
qemu_irq combirq)
{
g_autofree char *s = g_strdup_printf("uart%d", uartno);
SysBusDevice *sbd;
assert(uartno < ARRAY_SIZE(mms->uart));
object_initialize_child(OBJECT(mms), s, &mms->uart[uartno],
TYPE_CMSDK_APB_UART);
qdev_prop_set_uint32(DEVICE(&mms->uart[uartno]), "pclk-frq", CLK_FRQ);
qdev_prop_set_chr(DEVICE(&mms->uart[uartno]), "chardev", serial_hd(uartno));
sbd = SYS_BUS_DEVICE(&mms->uart[uartno]);
sysbus_realize(sbd, &error_fatal);
memory_region_add_subregion(mem, baseaddr,
sysbus_mmio_get_region(sbd, 0));
sysbus_connect_irq(sbd, 0, txirq);
sysbus_connect_irq(sbd, 1, rxirq);
sysbus_connect_irq(sbd, 2, txoverirq);
sysbus_connect_irq(sbd, 3, rxoverirq);
sysbus_connect_irq(sbd, 4, combirq);
}
static void mps3r_common_init(MachineState *machine)
{
MPS3RMachineState *mms = MPS3R_MACHINE(machine);
MPS3RMachineClass *mmc = MPS3R_MACHINE_GET_CLASS(mms);
MemoryRegion *sysmem = get_system_memory();
DeviceState *gicdev;
QList *oscclk;
mms->clk = clock_new(OBJECT(machine), "CLK");
clock_set_hz(mms->clk, CLK_FRQ);
for (const RAMInfo *ri = mmc->raminfo; ri->name; ri++) {
MemoryRegion *mr = mr_for_raminfo(mms, ri);
memory_region_add_subregion(sysmem, ri->base, mr);
}
assert(machine->smp.cpus <= MPS3R_CPU_MAX);
for (int i = 0; i < machine->smp.cpus; i++) {
g_autofree char *sysmem_name = g_strdup_printf("cpu-%d-memory", i);
g_autofree char *ramname = g_strdup_printf("cpu-%d-memory", i);
g_autofree char *alias_name = g_strdup_printf("sysmem-alias-%d", i);
/*
* Each CPU has some private RAM/peripherals, so create the container
* which will house those, with the whole-machine system memory being
* used where there's no CPU-specific device. Note that we need the
* sysmem_alias aliases because we can't put one MR (the original
* 'sysmem') into more than one other MR.
*/
memory_region_init(&mms->cpu_sysmem[i], OBJECT(machine),
sysmem_name, UINT64_MAX);
memory_region_init_alias(&mms->sysmem_alias[i], OBJECT(machine),
alias_name, sysmem, 0, UINT64_MAX);
memory_region_add_subregion_overlap(&mms->cpu_sysmem[i], 0,
&mms->sysmem_alias[i], -1);
mms->cpu[i] = object_new(machine->cpu_type);
object_property_set_link(mms->cpu[i], "memory",
OBJECT(&mms->cpu_sysmem[i]), &error_abort);
object_property_set_int(mms->cpu[i], "reset-cbar",
PERIPHBASE, &error_abort);
qdev_realize(DEVICE(mms->cpu[i]), NULL, &error_fatal);
object_unref(mms->cpu[i]);
/* Per-CPU RAM */
memory_region_init_ram(&mms->cpu_ram[i], NULL, ramname,
0x1000, &error_fatal);
memory_region_add_subregion(&mms->cpu_sysmem[i], 0xe7c01000,
&mms->cpu_ram[i]);
}
create_gic(mms, sysmem);
gicdev = DEVICE(&mms->gic);
/*
* UARTs 0 and 1 are per-CPU; their interrupts are wired to
* the relevant CPU's PPI 0..3, aka INTID 16..19
*/
for (int i = 0; i < machine->smp.cpus; i++) {
int intidbase = NUM_SPIS + i * GIC_INTERNAL;
g_autofree char *s = g_strdup_printf("cpu-uart-oflow-orgate%d", i);
DeviceState *orgate;
/* The two overflow IRQs from the UART are ORed together into PPI 3 */
object_initialize_child(OBJECT(mms), s, &mms->cpu_uart_oflow[i],
TYPE_OR_IRQ);
orgate = DEVICE(&mms->cpu_uart_oflow[i]);
qdev_prop_set_uint32(orgate, "num-lines", 2);
qdev_realize(orgate, NULL, &error_fatal);
qdev_connect_gpio_out(orgate, 0,
qdev_get_gpio_in(gicdev, intidbase + 19));
create_uart(mms, i, &mms->cpu_sysmem[i], 0xe7c00000,
qdev_get_gpio_in(gicdev, intidbase + 17), /* tx */
qdev_get_gpio_in(gicdev, intidbase + 16), /* rx */
qdev_get_gpio_in(orgate, 0), /* txover */
qdev_get_gpio_in(orgate, 1), /* rxover */
qdev_get_gpio_in(gicdev, intidbase + 18) /* combined */);
}
/*
* UARTs 2 to 5 are whole-system; all overflow IRQs are ORed
* together into IRQ 17
*/
object_initialize_child(OBJECT(mms), "uart-oflow-orgate",
&mms->uart_oflow, TYPE_OR_IRQ);
qdev_prop_set_uint32(DEVICE(&mms->uart_oflow), "num-lines",
MPS3R_UART_MAX * 2);
qdev_realize(DEVICE(&mms->uart_oflow), NULL, &error_fatal);
qdev_connect_gpio_out(DEVICE(&mms->uart_oflow), 0,
qdev_get_gpio_in(gicdev, 17));
for (int i = 0; i < MPS3R_UART_MAX; i++) {
hwaddr baseaddr = 0xe0205000 + i * 0x1000;
int rxirq = 5 + i * 2, txirq = 6 + i * 2, combirq = 13 + i;
create_uart(mms, i + MPS3R_CPU_MAX, sysmem, baseaddr,
qdev_get_gpio_in(gicdev, txirq),
qdev_get_gpio_in(gicdev, rxirq),
qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2),
qdev_get_gpio_in(DEVICE(&mms->uart_oflow), i * 2 + 1),
qdev_get_gpio_in(gicdev, combirq));
}
for (int i = 0; i < 4; i++) {
/* CMSDK GPIO controllers */
g_autofree char *s = g_strdup_printf("gpio%d", i);
create_unimplemented_device(s, 0xe0000000 + i * 0x1000, 0x1000);
}
object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog,
TYPE_CMSDK_APB_WATCHDOG);
qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->clk);
sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0,
qdev_get_gpio_in(gicdev, 0));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0xe0100000);
object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
TYPE_CMSDK_APB_DUALTIMER);
qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->clk);
sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
qdev_get_gpio_in(gicdev, 3));
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 1,
qdev_get_gpio_in(gicdev, 1));
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 2,
qdev_get_gpio_in(gicdev, 2));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0xe0101000);
for (int i = 0; i < ARRAY_SIZE(mms->i2c); i++) {
static const hwaddr i2cbase[] = {0xe0102000, /* Touch */
0xe0103000, /* Audio */
0xe0107000, /* Shield0 */
0xe0108000, /* Shield1 */
0xe0109000}; /* DDR4 EEPROM */
g_autofree char *s = g_strdup_printf("i2c%d", i);
object_initialize_child(OBJECT(mms), s, &mms->i2c[i],
TYPE_ARM_SBCON_I2C);
sysbus_realize(SYS_BUS_DEVICE(&mms->i2c[i]), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->i2c[i]), 0, i2cbase[i]);
if (i != 2 && i != 3) {
/*
* internal-only bus: mark it full to avoid user-created
* i2c devices being plugged into it.
*/
qbus_mark_full(qdev_get_child_bus(DEVICE(&mms->i2c[i]), "i2c"));
}
}
for (int i = 0; i < ARRAY_SIZE(mms->spi); i++) {
g_autofree char *s = g_strdup_printf("spi%d", i);
hwaddr baseaddr = 0xe0104000 + i * 0x1000;
object_initialize_child(OBJECT(mms), s, &mms->spi[i], TYPE_PL022);
sysbus_realize(SYS_BUS_DEVICE(&mms->spi[i]), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->spi[i]), 0, baseaddr);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->spi[i]), 0,
qdev_get_gpio_in(gicdev, 22 + i));
}
object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC);
qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg0", 0);
qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-cfg4", 0x2);
qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-aid", 0x00200008);
qdev_prop_set_uint32(DEVICE(&mms->scc), "scc-id", 0x41055360);
oscclk = qlist_new();
for (int i = 0; i < ARRAY_SIZE(an536_oscclk); i++) {
qlist_append_int(oscclk, an536_oscclk[i]);
}
qdev_prop_set_array(DEVICE(&mms->scc), "oscclk", oscclk);
sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->scc), 0, 0xe0200000);
create_unimplemented_device("i2s-audio", 0xe0201000, 0x1000);
object_initialize_child(OBJECT(mms), "fpgaio", &mms->fpgaio,
TYPE_MPS2_FPGAIO);
qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", an536_oscclk[1]);
qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "num-leds", 10);
qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-switches", true);
qdev_prop_set_bit(DEVICE(&mms->fpgaio), "has-dbgctrl", false);
sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0xe0202000);
create_unimplemented_device("clcd", 0xe0209000, 0x1000);
object_initialize_child(OBJECT(mms), "rtc", &mms->rtc, TYPE_PL031);
sysbus_realize(SYS_BUS_DEVICE(&mms->rtc), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->rtc), 0, 0xe020a000);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->rtc), 0,
qdev_get_gpio_in(gicdev, 4));
/*
* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
lan9118_init(0xe0300000,
qdev_get_gpio_in(gicdev, 18));
create_unimplemented_device("usb", 0xe0301000, 0x1000);
create_unimplemented_device("qspi-write-config", 0xe0600000, 0x1000);
mms->bootinfo.ram_size = machine->ram_size;
mms->bootinfo.board_id = -1;
mms->bootinfo.loader_start = mmc->loader_start;
mms->bootinfo.write_secondary_boot = mps3r_write_secondary_boot;
mms->bootinfo.secondary_cpu_reset_hook = mps3r_secondary_cpu_reset;
arm_load_kernel(ARM_CPU(mms->cpu[0]), machine, &mms->bootinfo);
}
static void mps3r_set_default_ram_info(MPS3RMachineClass *mmc)
{
/*
* Set mc->default_ram_size and default_ram_id from the
* information in mmc->raminfo.
*/
MachineClass *mc = MACHINE_CLASS(mmc);
const RAMInfo *p;
for (p = mmc->raminfo; p->name; p++) {
if (p->mrindex < 0) {
/* Found the entry for "system memory" */
mc->default_ram_size = p->size;
mc->default_ram_id = p->name;
mmc->loader_start = p->base;
return;
}
}
g_assert_not_reached();
}
static void mps3r_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->init = mps3r_common_init;
}
static void mps3r_an536_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
MPS3RMachineClass *mmc = MPS3R_MACHINE_CLASS(oc);
static const char * const valid_cpu_types[] = {
ARM_CPU_TYPE_NAME("cortex-r52"),
NULL
};
mc->desc = "ARM MPS3 with AN536 FPGA image for Cortex-R52";
/*
* In the real FPGA image there are always two cores, but the standard
* initial setting for the SCC SYSCON 0x000 register is 0x21, meaning
* that the second core is held in reset and halted. Many images built for
* the board do not expect the second core to run at startup (especially
* since on the real FPGA image it is not possible to use LDREX/STREX
* in RAM between the two cores, so a true SMP setup isn't supported).
*
* As QEMU's equivalent of this, we support both -smp 1 and -smp 2,
* with the default being -smp 1. This seems a more intuitive UI for
* QEMU users than, for instance, having a machine property to allow
* the user to set the initial value of the SYSCON 0x000 register.
*/
mc->default_cpus = 1;
mc->min_cpus = 1;
mc->max_cpus = 2;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-r52");
mc->valid_cpu_types = valid_cpu_types;
mmc->raminfo = an536_raminfo;
mps3r_set_default_ram_info(mmc);
}
static const TypeInfo mps3r_machine_types[] = {
{
.name = TYPE_MPS3R_MACHINE,
.parent = TYPE_MACHINE,
.abstract = true,
.instance_size = sizeof(MPS3RMachineState),
.class_size = sizeof(MPS3RMachineClass),
.class_init = mps3r_class_init,
}, {
.name = TYPE_MPS3R_AN536_MACHINE,
.parent = TYPE_MPS3R_MACHINE,
.class_init = mps3r_an536_class_init,
},
};
DEFINE_TYPES(mps3r_machine_types);
Reference in New Issue View Git Blame Copy Permalink